Microscopic and Spectroscopic Methods for Probing the Clay Water Interface

Clay minerals have a fundamental importance in many processes in soils and sediments such as the bioavailability of nutrients, water retention, the adsorption of common pollutants, and the formation of an impermeable barrier upon swelling. Many of the properties of clay minerals are due to the unique environment present at the clay mineral/water interface. Traditional techniques such as X-ray diffraction (XRD) and absorption isotherms have provided a wealth of information about this interface but have suffered from limitations. The methods and results presented herein are designed to yield new experimental information about the clay mineral/water interface.A new method of studying the swelling dynamics of clay minerals was developed using in situ atomic force microscopy (AFM). The preliminary results presented here demonstrate that this technique allows one to study individual clay mineral unit layers, explore the natural heterogeneities of samples, and monitor swelling dynamics of clay minerals in real time. Cation exchange experiments were conducted monitoring the swelling change of individual nontronite quasi-crystals as the chemical composition of the surrounding environment was manipulated several times. A proof of concept study has shown that the changes in swelling are from the exchange of interlayer cations and not from the mechanical force of replacing the solution in the fluid cell. A series of attenuated total internal reflection Fourier transform infrared spectroscopy (ATR-FTIR) experiments were performed to gain a better understanding of the organization of water within the interlayer region of two Fe-bearing clay minerals. These experiments made use of the Subtractive Kramers-Kronig (SKK) Transform and the calculation of difference spectra to obtain information about interfacial water hidden within the absorption bands of bulk water. The results indicate that the reduction of structural iron disrupts the organization of water around a strongly hydrated cation such as sodium as the cation transitions from an outer-sphere complex with the mineral surface to an inner-sphere complex. In the case of a less strongly hydrated cation such as potassium, reduction of structural iron actually increases the ordering of water molecules at the mineral surface. These effects were only noticed with the reduction of iron in the tetrahedral sheet close to the basal surface where the increased charge density is localized closer to the cations in the interlayer.

Effects of conifer sawdust, hardwood sawdust, and peat on soil properties and a barefoot conifer seedling development

Organic amendments are commonly used to improve tree nursery soil conditions for increased seedling growth. However, few studies compare organic amendments effects on soil conditions, and fewer compare subsequent effects on seedling growth. The effects of three organic amendments on soil properties and seedling growth were investigated at the USDA Forest Service J.W. Toumey Nursery in Watersmeet, MI. Pine sawdust (red pine, Pinus resinosa), hardwood sawdust (maple, Acer spp. and aspen, Populus spp.), and peat were individually incorporated into a loamy sand nursery soil in August, 2006, and soil properties were sampled periodically for the next 14 months. Jack (Pinus banksiana), red, and white pine (Pinus strobus) were sown into test plots in June, 2007 and sampled for growth responses at the end of the growing season. It is hypothesized; pine sawdust and peat can be used as a satisfactory soil amendment to improve soil conditions and produce high quality seedlings, when compared to hardwood sawdust in bareroot nursery soils. This study has the potential to reduce nursery costs while broadening soil amendment options. The addition of peat and pine sawdust increased soil organic matter above control soil conditions after 14 months. However, hardwood sawdust-amended soils did not differ from control soils after same time period. High N concentrations in peat increased total soil N over the other treatments. Similarly, the addition of peat increased soil matric potential and available water over all other treatments. Seedlings grew tallest with the largest stem diameter, and had the largest biomass in both control soil and soil amended with peat, compared to either sawdust treatment. Seedlings grown in peat-amended soils had higher N concentrations than those grown in soils treated with pine sawdust, though neither was different from seedlings grown in control or hardwood sawdust-amended soils. Overall, peat is a well suited organic soil amendment for the enhancement of soil properties, but no amendments were able to increase one-year seedling growth over control soils.

Biovolatilisation: a poorly studied pathway of the arsenic biogeochemical cycle

It has been known for over a hundred years that microorganisms can produce volatile arsenic (As) species, termed “arsines”. However, this topic has received relatively little attention compared to As behaviour in soils and biotransformation through the trophic level in the marine and terrestrial environment. We believe this is due to long-standing misconceptions regarding volatile As stability and transport as well as an absence, until recently, of appropriate sampling methods. First and foremost, an attempt is made to unify arsines' designations, notations and formulas, taking into account all the different terms used in the literature. Then, the stability of As volatile species is discussed and new analytical developments are explored. Further, the special cases of diffuse low-level emissions (e.g. soil and sediment biovolatilisation), and point sources with high-level emissions (geothermal environments, landfills, and natural gas) are comprehensively reviewed. In each case, future possible areas of research and unknown mechanisms are identified and their importance towards the global As biogeochemical cycle is explored. This review gathers new information regarding mechanisms, stability, transport and sampling of the very elusive arsines and shows that more research should be conducted on this important process.

Combined effect of heterogeneity, anisotropy and saturation on steady state flow and transport: Structure recognition and numerical simulation

1 Natural soil profiles may be interpreted as an arrangement of parts which are characterized by properties like hydraulic conductivity and water retention function. These parts form a complicated structure. Characterizing the soil structure is fundamental in subsurface hydrology because it has a crucial influence on flow and transport and defines the patterns of many ecological processes. We applied an image analysis method for recognition and classification of visual soil attributes in order to model flow and transport through a man-made soil profile. Modeled and measured saturation-dependent effective parameters were compared. We found that characterizing and describing conductivity patterns in soils with sharp conductivity contrasts is feasible. Differently, solving flow and transport on the basis of these conductivity maps is difficult and, in general, requires special care for representation of small-scale processes.

Provenance versus weathering control on the composition of tropical river mud (southern Africa)

This study presents an integrated mineralogical-geochemical data base on fine-grained sediments transported by all major rivers of southern Africa, including the Zambezi, Okavango, Limpopo, Olifants, Orange and Kunene. Clay mineralogy, bulk geochemistry, Sr and Nd isotopic signatures of river mud, considered as proxy of suspended load, are used to investigate the influence of source-rock lithology and weathering intensity on the composition of clay and silt produced in subequatorial to subtropical latitudes. Depletion in mobile alkali and alkaline-earth metals, minor in arid Namibia, is strong in the Okavango, Kwando and Upper Zambezi catchments, where recycling is also extensive. Element removal is most significant for Na, and to a lesser extent for Sr. Depletion in K, Ca and other elements, negligible in Namibia, is moderate elsewhere. The most widespread clay minerals are smectite, dominant in muds derived from Karoo or Etendeka flood basalts, or illite and chlorite, dominant in muds derived from metasedimentary rocks of the Damara Orogen or Zimbabwe Craton. Kaolinite represents 30-40% of clay minerals only in Okavango and Upper Zambezi sediments sourced in humid subequatorial Angola and Zambia. After subtracting the effects of recycling and of local accumulation of authigenic carbonates in soils, the regional distribution of clay minerals and chemical indices consistently reflect weathering intensity primarily controlled by climate. Bulk geochemistry identifies most clearly volcaniclastic sediments and mafic sources in general, but cannot discriminate the other sources of detritus in detail. Instead, Sr and Nd isotopic fingerprints are insensitive to weathering, and thus mirror faithfully the tectonic structure of the southern African continent. Isotopic tools thus represent a much firmer basis than bulk geochemistry or clay mineralogy in the provenance study of mudrocks.

[The effectiveness of rare earth elements as a possible alternative growth promoter for pigs and poultry].

Mixtures of Rare Earth Elements (REE) have been used as animal growth-promoters on a large scale in China during the last 20 years. Numerous studies carried out in China claim it produces quite sensational growth-promoting effects in all categories of farm animals. To explore the question of whether REE's might prove suitable as a growth-promoter under western keeping conditions, feeding experiments were performed on pigs and poultry. The animals received a typical diet, supplemented with REE salts in concentrations between 75 and 300 mg/kg feed. Weight-gain, feed-intake, feed-conversion and (where applicable) laying parameters were observed. It was shown that in pigs receiving feed supplemented with REEs, an increase in daily weight gain of up to 19% and an improvement in feed-conversion of up to 11% can be achieved, whereas, for poultry, no positive effects on growth or productivity of the animals could be observed. Testing of important organs via Neutron Activating Analysis (NAA) showed a minute accumulation of REE, principally in liver and bones. Analysis of the poultry gut-flora, using selective media, showed that the main microorganism populations of the alimentary canal were unaffected by feed-supplementation with REE.

Iron-Promoted Nucleophilic Additions to Diimine-Type Ligands: A Synthetic and Structural Study

We report here three examples of the reactivity of protic nucleophiles with diimine-type ligands in the presence of FeII salts. In the first case, the iron-promoted alcoholysis reaction of one nitrile group of the ligand 2,3-dicyano-5,6-bis(2-pyridyl)-pyrazine (L1) permitted the isolation of an stable E-imido−ester, [Fe(L1‘)2](CF3SO3)2 (1), which has been characterized by spectroscopic studies (IR, ES-MS, Mössbauer), elemental analysis, and crystallographically. Compound 1 consists of mononuclear octahedrally coordinated FeII complexes where the FeII ion is in its low-spin state. The iron-mediated nucleophilic attack of water to the asymmetric ligand 2,3-bis(2-pyridyl)pyrido[3,4-b]pyrazine (L2) has also been studied. In this context, the crystal structures of two hydration−oxidation FeIII products, [Fe(L2‘)2](ClO4)3·3CH3CN (2) and trans-[FeL2‘‘Cl2] (3), are described. Compounds 2 and 3 are both mononuclear FeIII complexes where the metals occupy octahedral positions. In principle, L2 is expected to coordinate to metal ions through its bipyridine-type units to form a five-membered ring; however, this is not the case in compounds 2 and 3. In 2, the ligand coordinates through its pyridines and through the hydroxyl group attached to the pyrazine imino carbon after hydration, that is, in an N,O,N tridentate manner. In compound 3, the ligand has suffered further transformations leading to a very stable diamido complex. In this case, the metal ion achieves its octahedral geometry by means of two pyridines, two amido N atoms, and two axial chlorine atoms. Magnetic susceptibility measurements confirmed the spin state of these two FeIII species:  compounds 2 and 3 are low-spin and high-spin, respectively.

Stabilisation of precipitates of pedogenic dissolved organic matter by multivalent cations

Purpose Precipitation of dissolved organic matter (DOM) by multivalent cations is important for biogeochemical cycling of organic carbon. We investigated to which extent cation bridges are involved in DOM precipitation and how cross-links by cations and water molecule bridges (WaMB) stabilise the matrix of precipitated DOM. Materials and methods DOM was precipitated from the aqueous extract of a forest floor layer adding solutions of Ca(NO3)2, Al(NO3)3 and Pb(NO3)2 with different initial metal cation/C (Me/C) ratios. Precipitates were investigated by differential scanning calorimetry before and after ageing to detect cation bridges, WaMB and restructuring of supramolecular structure. Results and discussion Twenty-five to sixty-seven per cent of the dissolved organic carbon was precipitated. The precipitation efficiency of cations increased in the order Ca < Al < Pb, while the cation content of precipitates increased in the order Pb < Ca < Al. The different order and the decrease in the WaMB transition temperature (T*) for Al/C > 3 is explained by additional formation of small AlOOH particles. Thermal analysis indicated WaMB and their disruption at T* of 53–65 °C. Like cation content, T* increased with increasing Me/C ratio and in the order Ca < Pb < Al for low Me/C. This supports the general assumption that cross-linking ability increases in the order Ca < Pb < Al. The low T* for high initial Me/C suggests less stable and less cross-linked precipitates than for low Me/C ratios. Conclusions Our results suggest a very similar thermal behaviour of OM bound in precipitates compared with soil organic matter and confirms the relevance of WaMB in stabilisation of the supramolecular structure of cation-DOM precipitates. Thus, stabilisation of the supramolecular structure of the DOM precipitates is subjected to dynamics in soils.

Iodine-129: Sample preparation, quality control and analyses of pre-nuclear materials and of natural waters from Lower Saxony, Germany

Sample preparation procedures for AMS measurements of 129I and 127I in environmental materials and some methodological aspects of quality assurance are discussed. Measurements from analyses of some pre-nuclear soil and thyroid gland samples and of a systematic investigation of natural waters in Lower Saxony, Germany, are described. Although the up-to-now lowest 129I/127I ratios in soils and thyroid glands were observed, they are still suspect to contamination since they are significantly higher than the pre-nuclear equilibrium ratio in the marine hydrosphere. A survey on all available 129I/127I isotopic ratios in precipitation shows a dramatic increase until the middle of the 1980s and a stabilization since 1987 at high isotopic ratios of about (3.6–8.3)×10−7. In surface waters, ratios of (57–380)×10−10 are measured while shallow ground waters show with ratios of (1.3–200)×10−10 significantly lower values with a much larger spread. The data for 129I in soils and in precipitation are used to estimate pre-nuclear and modern 129I deposition densities.

Benthic foraminiferal stable isotope record from ODP Site 138-849 on the East Pacific Rise

Benthic foraminifer and delta13C data from Site 849, on the west flank of the East Pacific Rise (0°11 'N, 110°31'W; 3851 m), give relatively continuous records of deep Pacific Ocean stable isotope variations between 0 and 5 Ma. The mean sample spacing is 4 k.y. Most analyses are from Cibicides wuellerstorfi, but isotopic offsets relative to Uvigerina peregrina appear roughly constant. Because of its location west of the East Pacific Rise, Site 849 yields a suitable record of mean Pacific Ocean delta13C, which approximates a global oceanic signal. The ~100-k.y.-period climate cycle, which is prevalent in delta18O does not dominate the long-term delta13C record. For delta13C, variations in the ~400- and 41-k.y. periods are more important. Phase lags of delta13C relative to ice volume in the 41- and 23-k.y. bands are consistent with delta13C as a measure of organic biomass. A model-calculated exponential response time of 1-2 k.y. is appropriate for carbon stored in soils and shallow sediments responding to glacial-interglacial climate change. Oceanic delta13C leads ice volume slightly in the 100-k.y. band, and this suggests another process such as changes in continental weathering to modulate mean river delta13C at long periods. The delta13C record from Site 849 diverges from that of Site 677 in the Panama Basin mostly because of decay of 13C-depleted organic carbon in the relatively isolated Panama Basin. North Atlantic to Pacific delta13C differences calculated using published data from Sites 607 and 849 reveal variations in Pliocene deep water within the range of those of the late Quaternary. Maximum delta13C contrast between these sites, which presumably reflects maximum influx of high-delta13C northern source water into the deep North Atlantic Ocean, occurred between 1.3 and 2.1 Ma, well after the initiation of Northern Hemisphere glaciation. Export of high-delta13C North Atlantic Deep Water from the Atlantic to the circumpolar Antarctic, as recorded by published delta13C data from Subantarctic Site 704, appears unrelated to the North Atlantic-Pacific delta13C contrast. To account for this observation, we suggest that deep-water formation in the North Atlantic reflects northern source characteristics, whereas export of this water into the circumpolar Antarctic reflects Southern Hemisphere wind forcing. Neither process appears directly linked to ice-volume variations.

Contaminación microbiológica en ajos y suelos regados con efluentes domésticos tratados : Mendoza (Argentina)

Se presentan los resultados obtenidos de un ensayo a campo que se llevó a cabo en la Provincia de Mendoza, Argentina. El objetivo fue evaluar: a) la calidad microbiológica de los ajos regados con efluentes domésticos tratados en zanjas de oxidación y su aceptabilidad para consumo fresco y b) la contaminación residual en suelos. El ajo se cultivó en una parcela experimental regada con efluente y con agua limpia (testigo) mediante riego superficial. A partir de la cosecha se realizaron determinaciones de Escherichia coli y de Salmonella en los ajos, en tres oportunidades de muestreo, y en el suelo, en dos oportunidades. Los resultados fueron comparados con aquellos obtenidos en un estudio previo conducido en similares condiciones. Siguiendo los planes de muestreo de la Comisión Internacional para la Especificación Microbiológica de Alimentos para vegetales que se consumen crudos, se concluyó que los ajos estuvieron aptos para el consumo a los 20 días después de la cosecha y 26 días desde el último riego. No se detectó Salmonella ni en los ajos ni en los suelos.

Evaluación del rendimiento y calidad de cultivares de ajo colorado fertirrigados con nitrógeno

El objetivo de este trabajo fue diferenciar cultivares monoclonales de ajos colorados argentinos por sus características productivas, de calidad y respuesta a la fertilización nitrogenada en la región de Cuyo. Durante la campaña 2003 se realizó un ensayo en La Consulta, San Carlos, Mendoza, Argentina (950 msnm; 33° 42' S y 69° 04' W). El diseño experimental fue en franjas con parcelas divididas dispuestas en un diseño de bloques completos al azar de tres repeticiones en el cual las dosis de nitrógeno (75, 150, 225 y 300 kg de N·ha-1) incorporadas como SolUAN (30 % N) se asignaron a las parcelas principales y las subparcelas correspondieron a cinco clones de ajo: Fuego INTA, Sureño INTA, Gostoso INTA, Inco 30 y Rubí INTA. Se adicionó además un tratamiento control sin nitrógeno. En el análisis estadístico de los rendimientos (r2 = 0,81; cv%: 8,48 y p < 0,0001) se detectaron efectos significativos de las variables cultivares y dosis de fertilización nitrogenada pero no de la interacción de ambas. Se determinó que en suelos con contenidos medios de nitrógeno total (800 mg·kg-1), la dosis que maximiza los rendimientos es de 150 kg N·ha-1 en todas las cultivares salvo Gostoso cuyo valor crítico resultó mayor que el resto. El incremento de rendimiento atribuible a la fertirrigación con 150 kg N·ha-1 respecto del testigo fue: 45 % en Rubí (17,7 t· ha-1), 31 % en Fuego (15,3 t·ha-1), 19 % en Inco (15,4 t·ha-1) y 23 % en Sureño (13 t·ha-1). Gostoso aumentó un 21 % (13,8 t·ha-1) su rendimiento respecto del testigo con la dosis de 300 kg N·ha-1. El análisis de clasificación jerárquica permitió agrupar los genotipos según su potencial productivo, de mayor a menor, en tres clases: I: cv. Rubí ; II: cv. Inco 30 y cv. Fuego; III: cv. Sureño y Gostoso. La fertilización nitrogenada incrementó la manifestación de malformaciones en todas las cultivares respecto del testigo sin fertilización, excepto Sureño que presentó mayores anormalidades en el tratamiento testigo sin fertilizar.

Determinación de la relación de expansión en suelos de Mendoza (Argentina)

El objetivo fue lograr Índices de Corte ajustados a los suelos de las regiones en estudio y relacionar los mismos con determinaciones sencillas de laboratorio como volumen de sedimentación. Se observó en la región una gran disparidad de métodos para calcular el plano proyecto a obtener y la aplicación de valores de relación corte/relleno sin validación local. El trabajo se realizó en la provincia de Mendoza. Se relevaron 22 parcelas en las zonas irrigadas por los ríos Mendoza y Tunuyán. Los valores promedio de relación de expansión obtenidos, de acuerdo con el tipo de suelo, fueron: arenoso 1,04; franco 1,4; arcilloso 1,71; franco-arenoso 1,29; francoarcillo- limoso 1,71; franco-arcilloso 1,64 y franco-limoso 1,34, respectivamente.

Evaluación de metales pesados en suelos de los oasis irrigados de la Provincia de Mendoza : concentraciones totales de Zn, Pb, Cd y Cu

En Mendoza, Argentina, no existen antecedentes respecto de la presencia de elementos trazas, totales y disponibles, relacionados con el uso de los suelos en los oasis irrigados. El objetivo del trabajo, en esta etapa, fue determinar los contenidos totales de plomo (Pb), cadmio (Cd), cinc (Zn) y cobre (Cu) en la capa superficial de suelos (0-25 cm), diferenciados en siete tipos según una clasificación utilitaria: suelos vírgenes (SV); suelos de banquina (SB); suelos vecinos a banquina (SVB); suelos de agricultura intensiva (SAI); suelos de agricultura protegidos por lucha antigranizo (SLAG); suelos afectados por actividad industrial (SI) y suelos urbanos (SU). Sobre un total de 200 muestras se efectuó una digestión ácida en caliente y en los extractos se determinaron los metales en su fracción total, mediante espectrofotometría de absorción atómica (AAS). El análisis estadístico de los datos muestra que los niveles más elevados de Cu y Cd se detectan en SAI, con medias de 39,3 y 2,5 mg kg-1 respectivamente. En SI se observan los mayores valores de Pb, con una media de 80,6 mg kg-1 y en SU los mayores tenores de Zn, con un valor medio de 740 mg kg-1. La Ciudad de Mendoza, con mayor densidad poblacional, presentó los mayores contenidos de Zn, Pb y Cd. Las concentraciones encontradas se ubican por debajo de las exigencias de la legislación argentina y la mayoría de los suelos pueden clasificarse como no contaminados (SNC) o ligeramente contaminados (SLC). Se prevé completar este estudio con la determinación de las fracciones disponibles de los elementos estudiados, correlacionándolos con variables edáficas físico-químicas como textura, pH y materia orgánica.