Swiss Alps Jungfrau Aletsch UNESCO World Heritage Site - The state of this World Heritage region as a starting point for regional monitoring

The UNESCO listing as World Heritage Site confirms the outstanding qualities of the high-mountain region around the Great Aletsch Glacier. The region of the World Heritage Site now faces the responsibility to make these qualities visible and to preserve them for future generations. Consequently the qualities of the site must not be regarded in isolation but in the context of the entire region with its dynamics and developments. Regional monitoring is the observation and evaluation of temporal changes in target variables. It is thus an obligation towards UNESCO, who demands regular reports about the state of the listed World Heritage assets. It also allows statements about sustainable regional development and can be the basis for early recognition of threats to the outstanding qualities. Monitoring programmes face three major challenges: first, great care must be taken in defining the target qualities to be monitored or the monitoring would remain vague. Secondly, the selection of ideal indicators to describe these qualities is impeded by inadequate data quality and availability, compromises are inevitable. Thirdly, there is always an element of insecurity in the interpretation of the results as to what influences and determines the changes in the target qualities. The first survey of the monitoring programme confirmed the exceptional qualities of the region and also highlighted problematic issues.

Identification of the bovine Arachnomelia mutation by massively parallel sequencing implicates sulfite oxidase (SUOX) in bone development

Arachnomelia is a monogenic recessive defect of skeletal development in cattle. The causative mutation was previously mapped to a approximately 7 Mb interval on chromosome 5. Here we show that array-based sequence capture and massively parallel sequencing technology, combined with the typical family structure in livestock populations, facilitates the identification of the causative mutation. We re-sequenced the entire critical interval in a healthy partially inbred cow carrying one copy of the critical chromosome segment in its ancestral state and one copy of the same segment with the arachnomelia mutation, and we detected a single heterozygous position. The genetic makeup of several partially inbred cattle provides extremely strong support for the causality of this mutation. The mutation represents a single base insertion leading to a premature stop codon in the coding sequence of the SUOX gene and is perfectly associated with the arachnomelia phenotype. Our findings suggest an important role for sulfite oxidase in bone development.

The psychosis high-risk state: a comprehensive state-of-the-art review

Context During the past 2 decades, a major transition in the clinical characterization of psychotic disorders has occurred. The construct of a clinical high-risk (HR) state for psychosis has evolved to capture the prepsychotic phase, describing people presenting with potentially prodromal symptoms. The importance of this HR state has been increasingly recognized to such an extent that a new syndrome is being considered as a diagnostic category in the DSM-5. Objective To reframe the HR state in a comprehensive state-of-the-art review on the progress that has been made while also recognizing the challenges that remain. Data Sources Available HR research of the past 20 years from PubMed, books, meetings, abstracts, and international conferences. Study Selection and Data Extraction Critical review of HR studies addressing historical development, inclusion criteria, epidemiologic research, transition criteria, outcomes, clinical and functional characteristics, neurocognition, neuroimaging, predictors of psychosis development, treatment trials, socioeconomic aspects, nosography, and future challenges in the field. Data Synthesis Relevant articles retrieved in the literature search were discussed by a large group of leading worldwide experts in the field. The core results are presented after consensus and are summarized in illustrative tables and figures. Conclusions The relatively new field of HR research in psychosis is exciting. It has the potential to shed light on the development of major psychotic disorders and to alter their course. It also provides a rationale for service provision to those in need of help who could not previously access it and the possibility of changing trajectories for those with vulnerability to psychotic illnesses.

Solid-State Compatibilization of Immiscible Polymer Blends: Cryogenic Milling and Solid-State Shear Pulverization

The blending of common polymers allows for the rapid and facile synthesis of new materials with highly tunable properties at a fraction of the costs of new monomer development and synthesis. Most blends of polymers, however, are completely immiscible and separate into distinct phases with minimal phase interaction, severelydegrading the performance of the material. Cross-phase interactions and property enhancement can be achieved with these blends through reactive processing or compatibilizer addition. A new class of blend compatibilization relies on the mechanochemical reactions between polymer chains via solid-state, high energy processing. Two contrasting mechanochemical processing techniques are explored in this thesis: cryogenic milling and solid-state shear pulverization (SSSP). Cryogenic milling is a batch process where a milling rod rapidly impacts the blend sample while submerged within a bath of liquid nitrogen. In contrast, SSSP is a continuous process where blend components are subjected to high shear and compressive forces while progressing down a chilled twin-screw barrel. In the cryogenic milling study, through the application of a synthesized labeledpolymer, in situ formation of copolymers was observed for the first time. The microstructures of polystyrene/high-density polyethylene (PS/HDPE) blends fabricated via cryomilling followed by intimate melt-state mixing and static annealing were found to be morphologically stable over time. PS/HDPE blends fabricated via SSSP also showed compatibilization by way of ideal blend morphology through growth mechanisms with slightly different behavior compared to the cryomilled blends. The new Bucknell University SSSP instrument was carefully analyzed and optimized to produce compatibilized polymer blends through a full-factorial experiment. Finally, blends of varying levels of compatibilization were subjected to common material tests to determine alternative means of measuring and quantifying compatibilization,

The Crystallization Kinetics of Polylactic Acid (Pla) Processed Through Solid-State/Melt Extrusion

Polylactic acid (PLA) is a bio-derived, biodegradable polymer with a number of similar mechanical properties to commodity plastics like polyethylene (PE) and polyethylene terephthalate (PETE). There has recently been a great interest in using PLA to replace these typical petroleum-derived polymers because of the developing trend to use more sustainable materials and technologies. However, PLA¿s inherent slow crystallization behavior is not compatible with prototypical polymer processing techniques such as molding and extrusion, and in turn inhibits its widespread use in industrial applications. In order to make PLA into a commercially-viable material, there is a need to process the material in such a way that its tendency to form crystals is enhanced. The industry standard for producing PLA products is via twin screw extrusion (TSE), where polymer pellets are fed into a heated extruder, mixed at a temperature above its melting temperature, and molded into a desired shape. A relatively novel processing technique called solid-state shear pulverization (SSSP) processes the polymer in the solid state so that nucleation sites can develop and fast crystallization can occur. SSSP has also been found to enhance the mechanical properties of a material, but its powder output form is undesirable in industry. A new process called solid-state/melt extrusion (SSME), developed at Bucknell University, combines the TSE and SSSP processes in one instrument. This technique has proven to produce moldable polymer products with increased mechanical strength. This thesis first investigated the effects of the TSE, SSSP, and SSME polymer processing techniques on PLA. The study seeks to determine the process that yields products with the most enhanced thermal and mechanical properties. For characterization, percent crystallinity, crystallization half time, storage modulus, softening temperature, degradation temperature and molecular weight were analyzed for all samples. Through these characterization techniques, it was observed that SSME-processed PLA had enhanced properties relative to TSE- and SSSP-processed PLA. Because of the previous findings, an optimization study for SSME-processed PLA was conducted where throughput and screw design were varied. The optimization study determined PLA processed with a low flow rate and a moderate screw design in an SSME process produced a polymer product with the largest increase in thermal properties and a high retention of polymer structure relative to TSE-, SSSP-, and all other SSME-processed PLA. It was concluded that the SSSP part of processing scissions polymer chains, creating defects within the material, while the TSE part of processing allows these defects to be mixed thoroughly throughout the sample. The study showed that a proper SSME setup allows for both the increase in nucleation sites within the polymer and sufficient mixing, which in turn leads to the development of a large amount of crystals in a short period of time.

State-Level Pharmaceutical Assistance Programs for the Elderly: A national survey.

In order to put Pennsylvania's Pharmaceutical Assistance Contract for the Elderly (PACE) Program in a national context, a nationwide mail survey and telephone follow-up to each of the 58 State Unit Directors on Aging in the United States and its territories identified 10 programs. The results reported in this article are specific to the seven state-level pharmaceutical assistance programs which were in operation during the fiscal year 1984-85. In general, the programs varied on select program characteristics and on their efforts to address major policy issues. Data from the non-program states indicated support, legislative efforts, and a high interest in fiscal concerns. The findings reflect a lack of program uniformity and have implications for program development and implementation. Suggestions on how to identify the "optimum" or best combination of program and policy options are discussed.

State Pharmaceutical Assisstance for the Elderly and Disabled: Planning Issues for Program and Non-Program States

The Medicare Catastrophic Coverage Act (MCCA) would have mandated federal assistance for Medicare beneficiaries who have high annual prescription medication costs, High national expenditures for such drugs have encouraged the development of private and state insurance programs to help with these costs. Ten state pharmaceutical assistance programs (SPAPs), designed to help certain elderly, low income, or disabled people, exist for those ineligible for Medicaid or unable to purchase coverage privately. Coordination of state and federal benefits was a consideration for established programs, and programs being planned needed to determine the feasibity of integration of federal assistance. But the enactment and subsequent appeal of the Act affected both planning and policy implications for these SPAPs. All U.S. states and territories were surveyed before the bill's repeal to collect data on the effects of MCCA for those with prescription drug programs and those without. The repeal of the federal program places pressure on the nonprogram states to proceed, perhaps more cautiously, to initiate program; for their own residents, given increasing out-of-pocket and insurance costs, and no federal program.

Lake Ladoga: Water Resources for the Sustainable Development of North-Western Russia and Finland

The aim of this project was to evaluate the present state and possible changes of water resources in Lake Ladoga and its drainage basin for the purposes of the sustainable development of North-Western Russia and Finland. The group assessed the state of the water resources in quantitative and qualitative terms, taking the system of sustainable development indicators suggested by the International Commission on Sustainable Development as a basis for assessment. These include pressure indicators (annual withdrawals of ground and surface water, domestic consumption of water per capita), state indicators (ground water reserves, concentration of faecalcoliform in fresh water, biochemical oxygen demand), and response indicators (waste-water treatment coverage, density of hydrological networks). The group proposed the following additional indicators and indices for the complex evaluation of the qualitative and quantitative state of the region's water resources: * Pressure indicators (external load, coefficient of anthropogenic pressure) * State indicators and indices (concentrations of chemicals in water, concentrations of chemicals in sediments, index of water pollution, critical load, critical limit, internal load, load/critical load, concentration/critical limit, internal load/external load, trophic state, biotic indicators and indices) * Response indicators (discharges of pure water, polluted water, partly treated water and the ratio between these, trans-boundary fluxes of pollutants, state expenditure on environmental protection, human life span) The assessment considered both temporal and spatial aspects and produced a regional classification of the area according to the index of water pollution. Mathematical models were developed to describe and forecast the processes under way in the lake and can be used to estimate the influence of climatic changes on the hydrological regime, as well as the influence of anthropogenic load on the trophic state of Lake Ladoga and to assess the consequences of accidental discharges of polluting admixtures of different kinds into the lake. The results of this mathematical modelling may be of use to decision-makers responsible for the management of water resources.

Opportunities for Local Development in Jiului Valley"

This was an exploratory study that aimed to gain a rough understanding of the possible ways of implementing community development. The study was carried out between October 1998 and August 1999 in Lupeni, in the Jiu Valley, which is a mining area facing major decline following the government's decision to restructure the mining industry. Against a background of the history of sociology and its insights into the development of the community concept and its theoretical, methodological and practical significance, an analysis was carried out on four levels relevant to the community development approach: social participation, citizens' level of dependency on the state, and membership and the sense of belonging to the local and national community. A needs analysis approach using questionnaires, in-depth interviews and the Delphi approach took into consideration all those actors who could play important roles in local development: local authorities, representatives of local organisations (schools, trade unions, local associations, churches), and local residents.

Global Change and the World's Mountains-Research Needs and Emerging Themes for Sustainable Development A Synthesis From the 2010 Perth II Conference

The conference on Global Change and the World’s Mountains held in Perth, Scotland, in 2010 offered a unique opportunity to analyze the state and progress of mountain research and its contribution to sustainable mountain development, as well as to reflect on required reorientations of research agendas. In this paper we provide the results of a three-step assessment of the research presented by 450 researchers from around the world. First, we determined the state of the art of mountain research and categorized it based on the analytical structure of the Global Land Project (GLP 2005). Second, we identified emerging themes for future research. Finally, we assessed the contribution of mountain research to sustainable development along the lines of the Grand Challenges in Global Sustainability Research (International Council for Science 2010). Analysis revealed that despite the growing recognition of the importance of more integrative research (inter- and transdisciplinary), the research community gathered in Perth still focuses on environmental drivers of change and on interactions within ecological systems. Only a small percentage of current research seeks to enhance understanding of social systems and of interactions between social and ecological systems. From the ecological systems perspective, a greater effort is needed to disentangle and assess different drivers of change and to investigate impacts on the rendering of ecosystem services. From the social systems perspective, significant shortcomings remain in understanding the characteristics, trends, and impacts of human movements to, within, and out of mountain areas as a form of global change. Likewise, sociocultural drivers affecting collective behavior as well as incentive systems devised by policy and decision makers are little understood and require more in-depth investigation. Both the complexity of coupled social– ecological systems and incomplete data sets hinder integrated systems research. Increased understanding of linkages and feedbacks between social and ecological systems will help to identify nonlinearities and thresholds (tipping points) in both system types. This presupposes effective collaboration between ecological and social sciences. Reflections on the Grand Challenges in Sustainability Research put forth by the International Council for Science (2010) reveal the need to intensify research on effective responses and innovations. This will help to achieve sustainable development in mountain regions while maintaining the core competence of mountain research in forecasting and observation.

Structural aspects of postnatal lung development - alveolar formation and growth

The human lung is born with a fraction of the adult complement of alveoli. The postnatal stages of human lung development comprise an alveolar stage, a stage of microvascular maturation, and very likely a stage of late alveolarization. The characteristic structural features of the alveolar stage are well known; they are very alike in human and rat lungs. The bases for alveolar formation are represented by immature inter-airspace walls with two capillary layers with a central sheet of connective tissue. Interalveolar septa are formed by folding up of one of the two capillary layers. In the alveolar stage, alveolar formation occurs rapidly and is typically very conspicuous in both species; it has therefore been termed 'bulk alveolarization'. During and after alveolarization the septa with double capillary networks are restructured to the mature form with a single network. This happens in the stage of microvascular maturation. After these steps the lung proceeds to a phase of growth during which capillary growth by intussusception plays an important role in supporting gas exchange. In view of reports that alveoli are added after the stage of microvascular maturation, the question arises whether the present concept of alveolar formation needs revision. On the basis of morphological and experimental findings we can state that mature lungs contain all the features needed for 'late alveolarization' by the classical septation process. Because of the high plasticity of the lung tissues, late alveolarization or some forms of compensatory alveolar formation may be considered for the human lung.

Direct adipotropic actions of atorvastatin: differentiation state-dependent induction of apoptosis, modulation of endocrine function, and inhibition of glucose uptake

Statins exert anti-inflammatory, anti-atherogenic actions. The mechanisms responsible for these effects remain only partially elucidated. Diabetes and obesity are characterized by low-grade inflammation. Metabolic and endocrine adipocyte dysfunction is known to play a crucial role in the development of these disorders and the related cardiovascular complications. Thus, direct modulation of adipocyte function may represent a mechanism of pleiotropic statin actions. We investigated effects of atorvastatin on apoptosis, differentiation, endocrine, and metabolic functions in murine white and brown adipocyte lines. Direct exposure of differentiating preadipocytes to atorvastatin strongly reduced lipid accumulation and diminished protein expression of the differentiation marker CCAAT/enhancer binding protein-beta (CEBP-beta). In fully differentiated adipocytes, however, lipid accumulation remained unchanged after chronic atorvastatin treatment. Furthermore, cell viability was reduced in response to atorvastatin treatment in proliferating and differentiating preadipocytes, but not in differentiated cells. Moreover, atorvastatin induced apoptosis and inhibited protein kinase B (AKT) phosphorylation in proliferating and differentiating preadipocytes, but not in differentiated adipocytes. On the endocrine level, direct atorvastatin treatment of differentiated white adipocytes enhanced expression of the pro-inflammatory adipokine interleukin-6 (IL-6), and downregulated expression of the insulin-mimetic and anti-inflammatory adipokines visfatin and adiponectin. Finally, these direct adipotropic endocrine effects of atorvastatin were paralleled by the acute inhibition of insulin-induced glucose uptake in differentiated white adipocytes, while protein expression of the thermogenic uncoupling protein-1 (UCP-1) in brown adipocytes remained unchanged. Taken together, our data for the first time demonstrate direct differentiation state-dependent effects of atorvastatin including apoptosis, modulation of pro-inflammatory and glucostatic adipokine expression, and insulin resistance in adipose cells. These differential interactions may explain variable clinical observations.