Respuesta pulpar a materiales de restauración tipo resina

Las resinas compuestas y adhesivos dentales se utilizan ampliamente para la restauración de dientes con pulpas vitales. La preferencia en el uso de estas resinas compuestas podría estar atribuida a que son materiales con buenos resultados estéticos y se consideran materiales de restauración estables. Sin embargo se ha demostrado que son susceptibles a la degradación y liberación de la fracción de sus componentes y que cierta cantidad de los monómeros de su composición permanecen sin polimerizar por un largo periodo de tiempo, pudiendo estos filtrarse hacia el tejido pulpar y causar alteraciones de la actividad fisiológica de las células de la pulpa (DPCs) (1). Además, estudios in vitro han demostrado que los componentes de las resinas compuestas tienen potenciales tóxicos, generando respuestas inmediatas y a largo plazo luego de su aplicación. Identificar el potencial tóxico y deletéreo de los materiales de restauración sobre el tejido pulpar es de gran interés y relevancia clínica, por ello este estudio comprende en una revisión de la literatura acerca de la respuesta pulpar a los materiales de restauración tipo resina.

Síntese e análise fotofísica de híbridos de cumarinas-chalconas

Dissertação (mestrado)—Universidade de Brasília, Instituto de Química, Programa de Pós-Graduação em Tecnologia Química e Biológica, 2016.

Métodos no convencionales para la preparación de polímeros de coordinación porosos. Una aproximación económica, medioambientalmente amigable y escalable

293 p. El contenido del capítulo 5 está sujeto a confidencialidad

O tratamento convencional coagulação/floculação na remoção de nanopartículas metálicas

Dissertação de Mestrado, Engenharia do Ambiente, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Nanofiltração na produção de vinhos: redução de acidez volátil e de compostos fenólicos indesejados

Dissertação de Mestrado, Engenharia Biológica, Faculdade de Ciências e Tecnologias, Universidade do Algarve, 2014

Compósitos poliméricos a base de fibras de licuri: efeitos da hibridização e do envelhecimento ambiental acelerado

The gradual replacement of conventional materials by the ones called composite materials is becoming a concern about the response of these composites against adverse environmental conditions, such as ultraviolet radiation, high temperature and moist. Also the search for new composite using natural fibers or a blend of it with synthetic fibers as reinforcement has been studied. In this sense, this research begins with a thorough study of microstructural characterization of licuri fiber, as a proposal of alternative reinforcement to polymeric composites. Thus, a study about the development of two composite laminates was done. The first one, involving only the fiber of licuri and the second comprising a hybrid composite based of fiber glass E and the fiber of licuri, in order to know the performance of the fiber when of fiber across the hybridization process. The laminates were made in the form of plates using the tereftálica ortho-polyester resin as matrix. The composite laminate made only by licuri fiber had two reinforcing fabric layers of unidirectional licuri and the hybrid composite had two reinforcing layers of unidirectional licuri fabric and three layers of fiber short glass-E mat. Finally, both laminates was exposed to aging acceleration in order to study the influence of environmental degradation involving the mechanical properties and fracture characteristics thereof. Regarding the mechanical properties of composites, these were determined through uniaxial tensile tests, uniaxial compression and three bending points for both laminates in original state, and uniaxial tensile tests and three bending points after accelerated aging. As regards the study of structural degradation due to aging of the laminates, it was carried out based on microscopic analysis and microstructure, as well as measuring weight loss. The characteristics of the fracture was performed by macroscopic and microscopic (optical and SEM) analysis. In general, the laminated composites based on fiber licuri showed some advantages in their responses to environmental aging. These advantages are observed in the behavior related to stiffness as well as the microstructural degradation and photo-oxidation processes. However, the structural integrity of this laminate was more affected in case the action of uniaxial tensile loads, where it was noted a lower rate of withholding his last resistance property

Design and synthesis of novel quinolones directed to the Plasmodium falciparum bc1 protein complex

Tese de Doutoramento, Química, Especialização em Química Orgânica, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2016

Aditivação de pastas geopoliméricas com tetraborato de sódio e látex não iônico para cimentação de Poços de Petróleo

The development of activities in the oil and gas sector has been promoting the search for materials more adequate to oilwell cementing operation. In the state of Rio Grande do Norte, the cement sheath integrity tend to fail during steam injection operation which is necessary to increase oil recovery in reservoir with heavy oil. Geopolymer is a material that can be used as alternative cement. It has been used in manufacturing of fireproof compounds, construction of structures and for controlling of toxic or radioactive waste. Latex is widely used in Portland cement slurries and its characteristic is the increase of compressive strength of cement slurries. Sodium Tetraborate is used in dental cement as a retarder. The addition of this additive aim to improve the geopolymeric slurries properties for oilwell cementing operation. The slurries studied are constituted of metakaolinite, potassium silicate, potassium hydroxide, non-ionic latex and sodium tetraborate. The properties evaluated were: viscosity, compressive strength, thickening time, density, fluid loss control, at ambient temperature (27 ºC) and at cement specification temperature. The tests were carried out in accordance to the practical recommendations of the norm API RP 10B. The slurries with sodium tetraborate did not change either their rheological properties or their mechanical properties or their density in relation the slurry with no additive. The increase of the concentration of sodium tetraborate increased the water loss at both temperatures studied. The best result obtained with the addition of sodium tetraborate was thickening time, which was tripled. The addition of latex in the slurries studied diminished their rheological properties and their density, however, at ambient temperature, it increased their compressive strength and it functioned as an accelerator. The increase of latex concentration increased the presence of water and then diminished the density of the slurries and increased the water loss. From the results obtained, it was concluded that sodium tetraborate and non-ionic latex are promising additives for geopolymer slurries to be used in oilwell cementing operation

Uso de argilominerais e diatomita como adsorvente de fenóis em águas produzidas na indústria de petróleo

The oil production in Brazil has been increasing each year. Consequently, increasing volumes of water produced are generated with large quantities of contaminants, which brings many problems in disposing of these waters. The concern that the concentrations of contaminants in water produced meet existing laws for disposal of effluents, has been extremely important for the development of different techniques for treatment of water produced. The study of clay minerals as adsorbents of organic contaminants has grown considerably so in order to combine the low cost with the efficiency of environmental preservation and health issues. Thus, this study aims to understand the characteristics of vermiculite clay, sodium bentonite, calcium bentonite and diatomite and evaluate their performance as adsorbents for phenol in the water produced. Through adsorption isotherms it was possible to observe the behavior of these adsorptive clay and diatomite for adsorption of phenol, the main phenolic compound found in water produced. Different concentrations of synthetic solutions of phenol were put in touch with these adsorbents under same conditions of agitation and temperature. The adsorbents were composted adsorptive favorable, but the vermiculite and diatomite showed little capacity for absorption, being suggested for absorbs small concentrations of phenol in the balance isothermal

Degradacao termica e catalitica da borra oleosa de Petroleo com materiais nanoestruturados al-mcm-41 e AL-SBA-15

Aiming to reduce and reuse waste oil from oily sludge generated in large volumes by the oil industry, types of nanostructured materials Al-MCM-41 and Al-SBA-15, with ratios of Si / Al = 50, were synthesized , and calcined solids used as catalysts in the degradation of oily sludge thermocatalytic oil from oilfield Canto do Amaro, in the state of Rio Grande do Norte. Samples of nanostructured materials were characterized by thermogravimetric analysis (TG / DTG), X-ray diffraction (XRD), scanning electron microscopy (SEM), absorption spectroscopy in the infrared Fourier transform (FT-IR) and adsorption nitrogen (BET). The characterization showed that the synthesized materials resulted in a catalyst nanostructure, and ordered pore diameter and surface area according to existing literature. The oily sludge sample was characterized by determining the API gravity and sulfur content and SARA analysis (saturates, aromatics, resins and asphaltenes). The results showed a material equivalent to the average oil with API gravity of 26.1, a low sulfur content and considerable amount of resins and asphaltenes, presented above in the literature. The thermal and catalytic degradation of the oily sludge oil was performed from room temperature to 870 ° C in the ratios of heating of 5, 10 and 20 ° C min-1. The curves generated by TG / DTG showed a more accelerated degradation of oily sludge when it introduced the nanostructured materials. These results were confirmed by activation energy calculated by the method of Flynn-Wall, in the presence of catalysts reduced energy, in particular in the range of cracking, showing the process efficiency, mainly for extraction of lightweight materials of composition of oily sludge, such as diesel and gasoline

Perfil conductual de las drogas de diseño MBDB, MDEA y PMA en modelos animales de agresión y ansiedad

MBDB, MDEA y PMA son tres drogas de diseño, estructuralmente similares al MDMA (“éxtasis”), que se han identificado en la composición de pastillas distribuidas como “éxtasis” en entornos recreativos durante los últimos treinta años. Estas feniletilaminas sintéticas presentan un perfil psicotrópico de tipo entactógeno (con capacidad para facilitar la proximidad, el contacto y la comunicación empática), similar al del MDMA en el modelo de discriminación de drogas. El MDMA ha sido objeto de un creciente interés científico y es, hasta la fecha, la única sustancia con un perfil entactógeno de la que se han investigado sus efectos conductuales en modelos animales de agresión y ansiedad, si bien sus resultados no siempre coinciden. Aunque existen algunas evidencias de que el MDMA puede tener efectos ansiolíticos en animales de laboratorio (Lin, Burden, Christie, & Johnston, 1999; Morley & McGregor, 2000; Ho, Pawlak, Guo, & Schwarting, 2004), en otros estudios se han observado alteraciones conductuales y correlatos neuroquímicos que sugieren un efecto ansiogénico (Bhattacharya, Bhattacharya & Ghosal, 1998; Gurtman, Morley, Li, Hunt, & McGregor, 2002; Maldonado & Navarro, 2000;; Navarro & Maldonado, 2002). Asimismo, en otros trabajos se ha señalado que el MDMA induce efectos antiagresivos (reducción de las conductas de amenaza y ataque), que se acompañan de un marcado aumento de las conductas de evitación/huida y defensa/sumisión, así como de una reducción de las conductas de investigación social, sugiriendo también la existencia de un perfil ansiogénico en los encuentros agonísticos entre ratones machos (Maldonado & Navarro, 2001; Navarro & Maldonado, 1999). En contraste, hasta la fecha la información experimental de las drogas MBDB, MDEA y PMA se limita a la evaluación de sus efectos conductuales sobre la conducta motora, así como algunos estudios sobre su metabolismo y posible mecanismo de acción. El objetivo general de este trabajo de investigación ha sido estudiar el perfil conductual de MBDB, MDEA y PMA en modelos animales de agresión y ansiedad. Para ello, se han examinado los efectos del MBDB (2, 4 y 8 mg/kg), MDEA (5, 10 y 20 mg/kg) y PMA (2, 4, 8 y 12 mg/kg) utilizando el modelo de agresión inducida por aislamiento y el modelo de ansiedad del laberinto elevado en cruz en ratones machos. Los resultados indican que estas sustancias en general comparten un perfil antiagresivo inespecífico. Esta falta de especificidad se debe en unos casos al aumento de las conductas de inmovilidad (4-12 mg/kg PMA), pero también a la presencia de propiedades ansiogénicas durante la interacción social, en especial con dosis elevadas, mientras que solo las dosis más bajas parecen aumentar la proximidad social, en especial la dosis menor de MBDB. Además, estas drogas parecen alterar el patrón conductual agonístico ofensivo (MBDB y MDEA) y defensivo (MBDB, MDEA y PMA), produciendo cambios diádicos que resultan coherentes con un aumento del nivel de conflicto y de ansiedad. En consonancia, los resultados del modelo del laberinto elevado en cruz indican que el MBDB produce un aumento de la ansiedad de menor intensidad que el producido por el MDMA. Sin embargo, MDEA y PMA parecen generar un estado de hipoexploración, y solo en dosis determinadas (20 mg/kg de MDEA y 4 mg/kg de PMA) muestran alteraciones discretas que sugieren un efecto ansiogénico débil, un perfil que en conjunto podría sugerir cierta similitud con alteraciones conductuales propias de los compuestos alucinógenos. Debido a la diferencia del perfil conductual del MDEA y PMA hallados en ambos modelos, sería necesario evaluar la ansiedad y su posible relación con la dosis y/o con la presencia de un oponente en la prueba en otros modelos experimentales. Lin, H. Q., Burden, P. M., Christie, M. J., & Johnston, G. A. R. (1999). The anxiogenic-like and anxiolytic-like effects of MDMA on mice in the elevated plus-maze: A comparison with amphetamine. Pharmacology, Biochemistry and Behavior, 62(3), 403-408. Morley, K. C., & McGregor, I. S. (2000). (±)-3,4-methylenedioxymethamphetamine (MDMA, 'ecstasy') increases social interaction in rats. European Journal of Pharmacology, 408(1), 41-49. Bhattacharya, S. K., Bhattacharya, A., & Ghosal, S. (1998). Anxiogenic activity of methylenedioxymethamphetamine (Ecstasy): An experimental study. Biogenic Amines, 14(3), 217-237. Gurtman, C. G., Morley, K. C., Li, K. M., Hunt, G. E., & McGregor, I. S. (2002). Increased anxiety in rats after 3,4-methylenedioxymethamphetamine: Association with serotonin depletion. European Journal of Pharmacology, 446(1-3), 89-96. Ho, Y., Pawlak, C. R., Guo, L., & Schwarting, R. K. W. (2004). Acute and long-term consequences of single MDMA administration in relation to individual anxiety levels in the rat. Behavioural Brain Research, 149(2), 135-144. Maldonado, E., & Navarro, J. F. (2000). Effects of 3,4-methylenedioxy-methamphetamine (MDMA) on anxiety in mice tested in the light/dark box. Progress in Neuro-Psychopharmacology and Biological Psychiatry, 24(3), 463-472. Maldonado, E., & Navarro, J. F. (2001b). MDMA ('ecstasy') exhibits an anxiogenic-like activity in social encounters between male mice. Pharmacological Research, 44(1), 27-31. Navarro, J. F., & Maldonado, E. (1999). Behavioral profile of 3,4-methylenedioxy-methamphetamine (MDMA) in agonistic encounters between male mice. Progress in Neuro-Psychopharmacology and Biological Psychiatry, 23(2), 327-334. Navarro, J. F., & Maldonado, E. (2002). Acute and subchronic effects of MDMA ("ecstasy") on anxiety in male mice tested in the elevated plus-maze. Progress in Neuro-Psychopharmacology and Biological Psychiatry, 26(6), 1151-1154.