Asuinkerrostalon lämmöntuottojärjestelmän optimointi elinkaarikustannusten perusteella hyödynnettäessä lämpöpumpulla useita lämmönlähteitä

The basis of this thesis was to optimize heat pump that uses multiple heat sources to get competitive heating system for residential building when life cycle costs are considered. The objectives were to compile necessary information to calculate life cycle costs for heating system of residential building and start to compose of designing program for heat pump based heating systems. Examinations were made for the purchase energy need of residential building. Features of heat pump, considered refrigerant and potential heat sources were examined to find out heat production potential of heat pumps. Necessary information for life cycle cost calculation was also examined. Collected data was used in two case analyses to design selected heat production systems and calculate their life cycle costs. On the basis of case analyses heat pump based hybrid heat production systems are very competitive on life cycle cost comparison against district heating when residential building uses a lot of energy. New buildings use considerably less energy and achieved energy cost savings with heat pump systems may not be enough to cover the relatively high investment cost in reasonable time period compared to district heating system. The calculation method was found to require further development to at least include the cooling energy need of the building. Cooling demand will continue to grow in the future, which improves the heat pump based heat production systems competitiveness compared to other systems.

Cardiac Troponin Specific Autoantibodies: Analytical Tools for Exploring Their Impact on Cardiac Troponin I Testing

Cardiac troponin (cTn) I and T are the recommended biomarkers for the diagnosis and risk stratification of patients with suspected acute coronary syndrome (ACS), a major cause of cardiovascular death and disability worldwide. It has recently been demonstrated that cTn-specific autoantibodies (cTnAAb) can negatively interfere with cTnI detection by immunoassays to the extent that cTnAAb-positive patients may be falsely designated as cTnI-negative. The aim of this thesis was to develop and optimize immunoassays for the detection of both cTnI and cTnAAb, which would eventually enable exploring the clinical impact of these autoantibodies on cTnI testing and subsequent patient management. The extent of cTnAAb interference in different cTnI assay configurations and the molecular characteristics of cTnAAbs were investigated in publications I and II, respectively. The findings showed that cTnI midfragment targeting immunoassays used predominantly in clinical practice are affected by cTnAAb interference which can be circumvented by using a novel 3+1-type assay design with three capture antibodies against the N-terminus, midfragment and C-terminus and one tracer antibody against the C-terminus. The use of this assay configuration was further supported by the epitope specificity study, which showed that although the midfragment is most commonly targeted by cTnAAbs, the interference basically encompasses the whole molecule, and there may be remarkable individual variation at the affected sites. In publications III and IV, all the data obtained in previous studies were utilized to develop an improved version of an existing cTnAAb assay and a sensitive cTnI assay free of this specific analytical interference. The results of the thesis showed that approximately one in 10 patients with suspected ACS have detectable amounts of cTnAAbs in their circulation and that cTnAAbs can inhibit cTnI determination when targeted against the binding sites of assay antibodies used in its immunological detection. In the light of these observations, the risk of clinical misclassification caused by the presence of cTnAAbs remains a valid and reasonable concern. Because the titers, affinities and epitope specificities of cTnAAbs and the concentration of endogenous cTnI determine the final effect of circulating cTnAAbs, appropriately sized studies on their clinical significance are warranted. The new cTnI and cTnAAb assays could serve as analytical tools for establishing the impact of cTnAAbs on cTnI testing and also for unraveling the etiology of cTn-related autoimmune responses.

Jalometallien pelkistyskemikaalit

Tässä työssä esitellään kirjallisuudesta löytyneitä vaihtoehtoja jalometallien (Au, Ag, Pt, Pd, Is, Os, Rh, Ru, Re) homogeeniseen pelkistämiseen ja tekijöitä, jotka vaikuttavat pelkistimen valintaan. Jalometallien korkea hinta tekee niiden talteenoton pienistäkin pitoisuuksista kiinnostavaksi. Pelkistäminen on talteenoton viimeinen vaihe, jota voidaan käyttää myös puhdistusaskeleena. Pelkistimen valinnalla on suuri merkitys pelkistystulokseen. Myös pH:lla ja lämpötilalla on merkittävä vaikutus pelkistykseen. Ideaalinen pelkistyskemikaali on edullinen, selektiivinen, sillä on kohtuullinen pelkistysaika, se ei ole haitallinen, ei muodosta haitallisia sivutuotteita ja tarvittava prosessi on yksinkertainen. Lupaavia pelkistyskemikaaleja ovat esimerkiksi askorbiinihappo, vetyperoksidi ja muurahaishappo.

Study of the embryofeto-toxicity of Crown-of-Thorns (Euphorbia milii) latex, a natural molluscicide

The crude latex of Crown-of-Thorns (Euphorbia milii var. hislopii) is a potent plant molluscicide and a promising alternative to the synthetic molluscicides used in schistosomiasis control. The present study was undertaken to investigate the embryofeto-toxic potential of E. milii latex. The study is part of a comprehensive safety evaluation of this plant molluscicide. Lyophilized latex (0, 125, 250 and 500 mg/kg body weight) in corn oil was given by gavage to Wistar rats (N = 100) from days 6 to 15 of pregnancy and cesarean sections were performed on day 21 of pregnancy. The numbers of implantation sites, living and dead fetuses, resorptions and corpora lutea were recorded. Fetuses were weighed, examined for external malformations, and fixed for visceral examination, or cleared and stained with Alizarin red S for skeleton evaluation. A reduction of body weight minus uterine weight at term indicated that E. milii latex was maternally toxic over the dose range tested. No latex-induced embryolethality was noted at the lowest dose (125 mg/kg) but the resorption rate was markedly increased at 250 mg/kg (62.5%) and 500 mg/kg (93.4%). A higher frequency of fetuses showing signs of delayed ossification (control: 17.4%; 125 mg/kg: 27.4% and 250 mg/kg: 62.8%; P<0.05 vs control) indicated that fetal growth was retarded at doses ³ 125 mg latex/kg body weight. No increase in the proportion of fetuses with skeletal anomalies was observed at the lowest dose but the incidence of minor skeletal malformations was higher at 250 mg/kg body weight (control: 13.7%; 125 mg/kg: 14.8%; 250 mg/kg: 45.7%; P<0.05 vs control). Since a higher frequency of minor malformations was noted only at very high doses of latex which are embryolethal and maternally toxic, it is reasonable to conclude that this plant molluscicide poses no teratogenic hazard or, at least, that this possibility is of a considerably low order of magnitude

Carbon monoxide: from toxin to endogenous modulator of cardiovascular functions

Carbon monoxide (CO) is a pollutant commonly recognized for its toxicological attributes, including CNS and cardiovascular effects. But CO is also formed endogenously in mammalian tissues. Endogenously formed CO normally arises from heme degradation in a reaction catalyzed by heme oxygenase. While inhibitors of endogenous CO production can raise arterial pressure, heme loading can enhance CO production and lead to vasodepression. Both central and peripheral tissues possess heme oxygenases and generate CO from heme, but the inability of heme substrate to cross the blood brain barrier suggests the CNS heme-heme oxygenase-CO system may be independent of the periphery. In the CNS, CO apparently acts in the nucleus tractus solitarii (NTS) promoting changes in glutamatergic neurotransmission and lowering blood pressure. At the periphery, the heme-heme oxygenase-CO system can affect cardiovascular functions in a two-fold manner; specifically: 1) heme-derived CO generated within vascular smooth muscle (VSM) can promote vasodilation, but 2) its actions on the endothelium apparently can promote vasoconstriction. Thus, it seems reasonable that the CNS-, VSM- and endothelial-dependent actions of the heme-heme oxygenase-CO system may all affect cardiac output and vascular resistance, and subsequently blood pressure.

Serum cytokine levels in autoimmune and non-autoimmune hyperthyroid states

Although the role of interleukin-2 (IL-2) and interferon gamma (gIFN) is still poorly understood in hyperthyroid diseases, it is reasonable to assume that these cytokines may be present at higher levels in Graves' disease (GD) than in other primarily non-autoimmune thyroid diseases. In order to look for an easy method to distinguish GD from primarily non-autoimmune causes of hyperthyroidism, we compared 13 healthy individuals with 21 treated and untreated hyperthyroid GD patients and with 19 patients with hyperthyroidism due to other etiologies: 7 cases of multinodular goiter, 5 cases of excessive hormone replacement and 7 cases of amiodarone-associated hyperthyroidism. All patients presented low TSH levels and a dubious clinical thyroid state. We found a good correlation between TSH and serum IL-2 levels (r = 0.56; P<0.01). Serum IL-2 (P<0.01) and gIFN (P<0.01) levels were lower in the hyperthyroid group of patients than in control subjects, suggesting a depressed TH1 pattern in the T-cell subset of hyperthyroid patients. GD had normal IL-2 levels, while patients with other forms of thyrotoxicosis presented decreased IL-2 levels (P<0.05). There was no difference between treated and untreated GD patients. We suggest that the direct measurement of serum IL-2 level may help to confirm hyperthyroidism caused by GD.

Minimizing Circulating Current in Parallel-Connected Photovoltaic Inverters

Parallel-connected photovoltaic inverters are required in large solar plants where it is not economically or technically reasonable to use a single inverter. Currently, parallel inverters require individual isolating transformers to cut the path for the circulating current. In this doctoral dissertation, the problem is approached by attempting to minimize the generated circulating current. The circulating current is a function of the generated common-mode voltages of the parallel inverters and can be minimized by synchronizing the inverters. The synchronization has previously been achieved by a communication link. However, in photovoltaic systems the inverters may be located far apart from each other. Thus, a control free of communication is desired. It is shown in this doctoral dissertation that the circulating current can also be obtained by a common-mode voltage measurement. A control method based on a short-time switching frequency transition is developed and tested with an actual photovoltaic environment of two parallel inverters connected to two 5 kW solar arrays. Controls based on the measurement of the circulating current and the common-mode voltage are generated and tested. A communication-free method of controlling the circulating current between parallelconnected inverters is developed and verified.

Comparison of AutoSetä and polysomnography for the detection of apnea-hypopnea events

The use of the flow vs time relationship obtained with the nasal prongs of the AutoSetä (AS) system (diagnosis mode) has been proposed to detect apneas and hypopneas in patients with reasonable nasal patency. Our aim was to compare the accuracy of AS to that of a computerized polysomnographic (PSG) system. The study was conducted on 56 individuals (45 men) with clinical characteristics of obstructive sleep apnea (OSA). Their mean (± SD) age was 44.6 ± 12 years and their body mass index was 31.3 ± 7 kg/m2. Data were submitted to parametric analysis to determine the agreement between methods and the intraclass correlation coefficient was calculated. The Student t-test and Bland and Altman plots were also used. Twelve patients had an apnea-hypopnea index (AHI) <10 in bed and 20 had values >40. The mean (± SD) AHI PSG index of 37.6 (28.8) was significantly lower (P = 0.0003) than AHI AS (41.8 (25.3)), but there was a high intraclass correlation coefficient (0.93), with 0.016 variance. For a threshold of AHI of 20, AS showed 73.0% accuracy, 97% sensitivity and 60% specificity, with positive and negative predictive values of 78% and 93%, respectively. Sensitivity, specificity and negative predictive values increased in parallel to the increase in AHI threshold for detecting OSA. However, when the differences of AHI PSG-AS were plotted against their means, the limits of agreement between the methods (95% of the differences) were +13 and -22, showing the discrepancy between the AHI values obtained with PSG and AS. Finally, cubic regression analysis was used to better predict the result of AHI PSG as a function of the method proposed, i.e., AHI AS. We conclude that, despite these differences, AHI measured by AutoSetä can be useful for the assessment of patients with high pre-test clinical probability of OSA, for whom standard PSG is not possible as an initial step in diagnosis.

Potential for Greenhouse Gas Emission Reductions by Using Biomethane as a Road Transportation Fuel

The aim of this thesis is to study whether the use of biomethane as a transportation fuel is reasonable from climate change perspective. In order to identify potentials and challenges for the reduction of greenhouse gas (GHG) emissions, this dissertation focuses on GHG emission comparisons, on feasibility studies and on the effects of various calculation methodologies. The GHG emissions calculations are carried out by using life cycle assessment (LCA) methodologies. The aim of these LCA studies is to figure out the key parameters affecting the GHG emission saving potential of biomethane production and use and to give recommendations related to methodological choices. The feasibility studies are also carried out from the life cycle perspective by dividing the biomethane production chain for various operators along the life cycle of biomethane in order to recognize economic bottlenecks. Biomethane use in the transportation sector leads to GHG emission reductions compared to fossil transportation fuels in most cases. In addition, electricity and heat production from landfill gas, biogas or biomethane leads to GHG reductions as well. Electricity production for electric vehicles is also a potential route to direct biogas or biomethane energy to transportation sector. However, various factors along the life cycle of biomethane affect the GHG reduction potentials. Furthermore, the methodological selections have significant effects on the results. From economic perspective, there are factors related to different operators along the life cycle of biomethane, which are not encouraging biomethane use in the transportation sector. To minimize the greenhouse gas emissions from the life cycle of biomethane, waste feedstock should be preferred. In addition, energy consumption, methane leakages, digestate utilization and the current use of feedstock or biogas are also key factors. To increase the use of biomethane in the transportation sector, political steering is needed to improve the feasibility for the operators. From methodological perspective, it is important to recognize the aim of the life cycle assessment study. The life cycle assessment studies can be divided into two categories: 1.) To produce average GHG information of biomethane to evaluate the acceptability of biomethane use compared to fossil transportation fuels. 2.) To produce GHG information of biomethane related to actual decision-making situations. This helps to figure out the actual GHG emission changes in cases when feedstock, biogas or biomethane are already in other use. For example directing biogas from electricity production to transportation use does not necessarily lead to additional GHG emission reductions. The use of biomethane seems to have a lot of potential for the reduction of greenhouse gas emissions as a transportation fuel. However, there are various aspects related to production processes, to the current use of feedstock or biogas and to the feasibility that have to be taken into account.

Application and development of numerical methods for the modelling of innovative gas cooled fission reactors

Innovative gas cooled reactors, such as the pebble bed reactor (PBR) and the gas cooled fast reactor (GFR) offer higher efficiency and new application areas for nuclear energy. Numerical methods were applied and developed to analyse the specific features of these reactor types with fully three dimensional calculation models. In the first part of this thesis, discrete element method (DEM) was used for a physically realistic modelling of the packing of fuel pebbles in PBR geometries and methods were developed for utilising the DEM results in subsequent reactor physics and thermal-hydraulics calculations. In the second part, the flow and heat transfer for a single gas cooled fuel rod of a GFR were investigated with computational fluid dynamics (CFD) methods. An in-house DEM implementation was validated and used for packing simulations, in which the effect of several parameters on the resulting average packing density was investigated. The restitution coefficient was found out to have the most significant effect. The results can be utilised in further work to obtain a pebble bed with a specific packing density. The packing structures of selected pebble beds were also analysed in detail and local variations in the packing density were observed, which should be taken into account especially in the reactor core thermal-hydraulic analyses. Two open source DEM codes were used to produce stochastic pebble bed configurations to add realism and improve the accuracy of criticality calculations performed with the Monte Carlo reactor physics code Serpent. Russian ASTRA criticality experiments were calculated. Pebble beds corresponding to the experimental specifications within measurement uncertainties were produced in DEM simulations and successfully exported into the subsequent reactor physics analysis. With the developed approach, two typical issues in Monte Carlo reactor physics calculations of pebble bed geometries were avoided. A novel method was developed and implemented as a MATLAB code to calculate porosities in the cells of a CFD calculation mesh constructed over a pebble bed obtained from DEM simulations. The code was further developed to distribute power and temperature data accurately between discrete based reactor physics and continuum based thermal-hydraulics models to enable coupled reactor core calculations. The developed method was also found useful for analysing sphere packings in general. CFD calculations were performed to investigate the pressure losses and heat transfer in three dimensional air cooled smooth and rib roughened rod geometries, housed inside a hexagonal flow channel representing a sub-channel of a single fuel rod of a GFR. The CFD geometry represented the test section of the L-STAR experimental facility at Karlsruhe Institute of Technology and the calculation results were compared to the corresponding experimental results. Knowledge was gained of the adequacy of various turbulence models and of the modelling requirements and issues related to the specific application. The obtained pressure loss results were in a relatively good agreement with the experimental data. Heat transfer in the smooth rod geometry was somewhat under predicted, which can partly be explained by unaccounted heat losses and uncertainties. In the rib roughened geometry heat transfer was severely under predicted by the used realisable k − epsilon turbulence model. An additional calculation with a v2 − f turbulence model showed significant improvement in the heat transfer results, which is most likely due to the better performance of the model in separated flow problems. Further investigations are suggested before using CFD to make conclusions of the heat transfer performance of rib roughened GFR fuel rod geometries. It is suggested that the viewpoints of numerical modelling are included in the planning of experiments to ease the challenging model construction and simulations and to avoid introducing additional sources of uncertainties. To facilitate the use of advanced calculation approaches, multi-physical aspects in experiments should also be considered and documented in a reasonable detail.

From emerging opportunities to successful business networks – evidence from bioenergy

Increasing renewable energy utilization is a challenge that is tried to be solved in different ways. One of the most promising options for renewable energy is different biomasses, and the bioenergy field offers numerous emerging business opportunities. The actors in the field have rarely all the needed know-how and resources for exploiting these opportunities, and thus it is reasonable to seize them in cooperation. Networking is not an easy task to carry out, however, and in addition to its advantages for the firms engaged, it sets numerous challenges as well. The development of a network is a result of several steps firms need to take. In order to gain optimal advantage of their networks, firms need to weigh out with whom, why and how they should cooperate. In addition, everything does not depend on the firms themselves, as several factors in the external environment set their own enablers and barriers for cooperation. The formation of a network around a business opportunity is thus a multiphase process. The objective of this thesis is to depict this process via a step-by-step analysis and thus increase understanding on the whole development path from an entrepreneurial opportunity to a successful business network. The empirical evidence has been gathered by discussing the opportunities of animal manure refinement to biogas and forest biomass utilization for heating in Finland. The thesis comprises two parts. The first part provides an overview of the study, and the second part includes five research publications. The results reveal that it is essential to identify and analyze all the steps in the development process of a network, and several frameworks are used in the thesis to analyze these steps. The frameworks combine the views of theory and practical experiences of empirical study, and thus give new multifaceted views for the discussion on SME networking. The results indicate that the ground for cooperation should be investigated adequately by taking account of the preconditions in all the three contexts in which the actors operate: the social context, the region and the institutional environment. In case the project advances to exploitation, the assets and objectives of the actors should be paired off, which sets a need for relationships and sub-networks differing in breadth and depth. Different relationships and networks require different kinds of maintenance and management. Moreover, the actors should have the capability to change the formality or strategy of the relationships if needed. The drivers for these changes come along with the changing environment, which causes changes in the objectives of the actors and this way in the whole network. Bioenergy as the empirical field of the study represents well an industrial field with many emerging opportunities, a motley group of actors, and sensitivity for fast changes.

Sähkönmyyntiyhtiön riskienhallinnan kehittäminen

Sähkönmyyntiyhtiön liiketoimintaan liittyy muiden yritysten toiminnan tavoin erilaisia riskejä. Riskit jaetaan operationaalisiin ja markkinariskeihin. Operationaalisia riskejä ovat esimerkiksi erilaiset henkilöstöön, tietojärjestelmiin tai operatiiviseen toimintaan liittyvät riskit. Sähkönmyyntiyhtiön liiketoimintaan kohdistuu myös erilaisia markkinariskejä, joihin tyypillisesti liittyy sekä voiton että tappion mahdollisuus. Sähkönmyyntiyhtiön liiketoimintaan liittyviä markkinariskejä ovat esimerkiksi volyymiriski, profiiliriski, hintariski ja johdannaisriski. Työssä käydään läpi myös muita markkinariskejä sekä pohditaan riskien suojautumiskeinoja. Markkinariskejä voidaan hallita useiden eri keinojen avulla. Tavallisimpia näistä ovat esimerkiksi johdannaisten ja peak- sekä profiilituotteiden hankkiminen, joiden avulla hallitaan markkinahintojen muutosten vaikutuksia liiketoiminnan tulokseen. Lisäksi yritys voi käyttää riskienhallintakeinoina monipuolista jälkilaskentaa sekä raportointia liiketoiminnan keskeisiltä osilta. Erityisesti riskienhallintakeinona käytetään erilaisia riskimittareita, joista Profit at Risk-riskimittarin katsottiin soveltuvan parhaiten sähkönmyyntiyhtiön riskienhallinnan tueksi. Riskienhallinnan kehityksen näkökulmasta yrityksen on syytä miettiä sopimusten hinnoitteluaan sekä suojausstrategiaansa.

Family ownership – a source of sustainable success in listed companies

Extant research on exchange-listed firms has acknowledged that the concentration of ownership and the identity of owners make a difference. In addition, studies indicate that firms with a dominant owner outperform firms with dispersed ownership. During the last few years, scholars have identified one group of owners, in particular, whose ownership stake in publicly listed firm is positively related to performance: the business family. While acknowledging that family firms represent a unique organizational form, scholars have identified various concepts and theories in order to understand how the family influences organizational processes and firm performance. Despite multitude of research, scholars have not been able to present clear results on how firm performance is actually impacted by the family. In other words, studies comparing the performance of listed family and other types of firms have remained descriptive in nature since they lack empirical data and confirmation from the family business representatives. What seems to be missing is a convincing theory that links the involvement and behavioral consequences. Accordingly, scholars have not yet come to a mutual understanding of what precisely constitutes a family business. The variety of different definitions and theories has made comparability of different results difficult for instance. These two issues have hampered the development of a rigorous theory of family business. The overall objective of this study is to describe and understand how the family as a dominant owner can enhance firm performance, and can act a source of sustainable success in listed companies. In more detail, in order to develop understanding of the unique factors that can act as competitive advantages for listed family firms, this study is based on a qualitative approach and aims at theory development, not theory verification. The data in this study consist of 16 thematic interviews with CEOs, members of the board, supervisory board chairs, and founders of Finnish listed-family firms. The study consists of two parts. The first part introduces the research topic, research paradigm, methods, and publications, and also discusses the overall outcomes and contributions of the publications. The second part consists of four publications that address the research questions from different viewpoints. The analyses of this study indicate that family ownership in listed companies represents a structure that differs from the traditional views of agency and stewardship, as well as from resource-based and stakeholder views. As opposed to these theories and shareholder capitalism which consider humans as individualistic, opportunistic, and self-serving, and assume that the behaviors of an investor are based on the incentives and motivations to maximize private profits, the family owners form a collective social unit that is motivated to act together toward their mutual purpose or benefit. In addition, socio-emotional and psychological elements of ownership define the family members as owners, rather than the legal and financial dimensions of ownership. That is, collective psychological ownership of family over the business (F-CPO) can be seen as a construct that comprehensively captures the fusion between the family and the business. Moreover, it captures the realized, rather than merely potential, family influence on and interaction with the business, and thereby brings more theoretical clarity of the nature of the fusion between the family and the business, and offers a solution to the problem of family business definition. This doctoral dissertation provides academics, policy-makers, family business practitioners, and the society at large with many implications considering family and business relationships.

Asiakkuudenhallinnan kehittäminen

Opinnäytetyön toimeksiantaja on suomalainen maatalouskonekaupan moniosaaja, jonka pääasiallisiin liiketoimiin kuuluu maatalouskoneiden maahantuonti, niiden myynti edelleen Suomessa sekä kannattavan rehuntekoketjun tarjoaminen asiakkailleen periaatteella ”nurmesta maitolasiin”. Työn tavoitteena oli avustaa perheyritystä sen asiakashallintaohjelmiston käyttöön ottamisessa. Työn ensimmäinen tavoite oli määrittää yrityksen asiakkuudenhallintaohjelmiston vaatimukset. Toinen tavoite oli selvittää yrityksen asiakashallinnan tämänhetkinen tila. Kolmas tavoite oli selvittää jo nykyisin käytössä olevan ohjelmiston taipuisuutta ja sen soveltuvuutta asiakkuudenhallintaohjelmistona. Työ on toteutettu kvalitatiivista tutkimusta apuna käyttäen, ja analyysiaineisto on kerätty sekundaarisista lähteistä, lähinnä kirjallisista teoksista sekä internetistä. Yrityksen henkilöstö on ollut sisäisen tiedon lähteenä. Opinnäytetyö auttaa toimeksiantajayritystä CRM – projektin tavoitteiden, mahdollisuuksien sekä mahdollisten hidasteiden selvittämisessä. Työn tuloksien avulla projektijohto voi määrittää ohjelmiston CRM – osuuden käyttöönottoon sekä aikatauluun vaadittavat resurssit.

The calcium-dependent protease of Loxosceles gaucho venom acts preferentially upon red cell band 3 transmembrane protein

Eighty micrograms red blood cell (RBC) ghosts from patients who had previously exhibited the cutaneous form of loxoscelism (presenting localized dermonecrosis) and the viscerocutaneous form of loxoscelism (presenting dermonecrosis, hemoglobinuria, hematuria, and jaundice) and from controls were incubated with 2.5 µg crude Loxosceles gaucho venom in 5 mM phosphate buffer, pH 7.4, at 37ºC. Among all membrane proteins, quantitative proteolysis of the important integral transmembrane protein 3 increased with venom dose and with incubation time from 30 to 120 min, as demonstrated by gel densitometry. Similar quantitative data were obtained for RBC ghosts from patients and from control subjects, a fact that argues against the possibility of genetic factors favoring the hemolytic viscerocutaneous form. These data suggest that the clinical forms may be different types of the same disease, with the viscerocutaneous form being the result of large amounts of intravascularly injected venom and the superficial form being the result of in situ venom action. Since protein 3 is a housekeeping integral membrane protein, whose genetic deficiency leads to hemolytic anemia, it is reasonable to relate it to the hemolysis which occurs in the viscerocutaneous form of loxoscelism. The venom protease responsible for the process was not inhibited after 120-min incubation by 0.2 mM paramethylsulfonyl fluoride or by 0.2 mM N-ethylmaleimide but was inhibited by 25 mM ethylenediaminetetraacetic acid (a calcium-chelating agent) in 5 mM phosphate buffer at pH 7.4, which suggests that the enzyme is a calcium-dependent metalloprotease.