Tribological Testing of Some Potential PVD and CVD Coatings for Steel Wire Drawing Dies

Cemented carbide is today the most frequently used drawing die material in steel wire drawing applications. This is mainly due to the possibility to obtain a broad combination of hardness and toughness thus meeting the requirements concerning strength, crack resistance and wear resistance set by the wire drawing process. However, the increasing cost of cemented carbide in combination with the possibility to increase the wear resistance of steel through the deposition of wear resistant CVD and PVD coatings have enhanced the interest to replace cemented carbide drawing dies with CVD and PVD coated steel wire drawing dies. In the present study, the possibility to replace cemented carbide wire drawing dies with CVD and PVD coated steel drawing dies have been investigated by tribological characterisation, i.e. pin-on-disc and scratch testing, in combination with post-test observations of the tribo surfaces using scanning electron microscopy, energy dispersive X-ray spectroscopy and 3D surface profilometry. Based on the results obtained, CVD and PVD coatings aimed to provide improved tribological performance of steel wire drawing dies should display a smooth surface topography, a high wear resistance, a high fracture toughness (i.e. a high cracking and chipping resistance) and intrinsic low friction properties in contact with the wire material. Also, the steel substrate used must display a sufficient load carrying capacity and resistance to thermal softening. Of the CVD and PVD coatings evaluated in the tribological tests, a CVD TiC and a PVD CrC/C coating displayed the most promising results.

Radiation properties of coil-coated steel in building envelope surfaces and the influence on building thermal performance

Recent studies have shown that the optical properties of building exterior surfaces are important in terms of energy use and thermal comfort. While the majority of the studies are related to exterior surfaces, the radiation properties of interior surfaces are less thoroughly investigated. Development in the coil-coating industries has now made it possible to allocate different optical properties for both exterior and interior surfaces of steel-clad buildings. The aim of this thesis is to investigate the influence of surface radiation properties with the focus on the thermal emittance of the interior surfaces, the modeling approaches and their consequences in the context of the building energy performance and indoor thermal environment. The study consists of both numerical and experimental investigations. The experimental investigations include parallel field measurements on three similar test cabins with different interior and exterior surface radiation properties in Borlänge, Sweden, and two ice rink arenas with normal and low emissive ceiling in Luleå, Sweden. The numerical methods include comparative simulations by the use of dynamic heat flux models, Building Energy Simulation (BES), Computational Fluid Dynamics (CFD) and a coupled model for BES and CFD. Several parametric studies and thermal performance analyses were carried out in combination with the different numerical methods. The parallel field measurements on the test cabins include the air, surface and radiation temperatures and energy use during passive and active (heating and cooling) measurements. Both measurement and comparative simulation results indicate an improvement in the indoor thermal environment when the interior surfaces have low emittance. In the ice rink arenas, surface and radiation temperature measurements indicate a considerable reduction in the ceiling-to-ice radiation by the use of low emittance surfaces, in agreement with a ceiling-toice radiation model using schematic dynamic heat flux calculations. The measurements in the test cabins indicate that the use of low emittance surfaces can increase the vertical indoor air temperature gradients depending on the time of day and outdoor conditions. This is in agreement with the transient CFD simulations having the boundary condition assigned on the exterior surfaces. The sensitivity analyses have been performed under different outdoor conditions and surface thermal radiation properties. The spatially resolved simulations indicate an increase in the air and surface temperature gradients by the use of low emittance coatings. This can allow for lower air temperature at the occupied zone during the summer. The combined effect of interior and exterior reflective coatings in terms of energy use has been investigated by the use of building energy simulation for different climates and internal heat loads. The results indicate possible energy savings by the smart choice of optical properties on interior and exterior surfaces of the building. Overall, it is concluded that the interior reflective coatings can contribute to building energy savings and improvement of the indoor thermal environment. This can be numerically investigated by the choice of appropriate models with respect to the level of detail and computational load. This thesis includes comparative simulations at different levels of detail.

The Isolation and Characterization of Multiply Antibiotic Resistant Strains of Fish Pathogenic Flavobacterium Species

Since the development of the first antibiotics in the 1940’s, there has been widespread overuse in both clinical and agricultural applications. Antibiotic resistance has become a significant problem as a result of subsequent dissemination of antibiotics into the environment, and multiply-resistant strains of bacteria are now a major pathogenic threat. In this study eight separate strains of Flavobacterium responsible for recent disease outbreaks in fish hatcheries throughout Maine were collected and analyzed. All eight strains were found to be resistant to high levels of a number of different antibiotics, including those used for aquaculture as well as human chemotherapeutic applications. Flavobacterium isolates were also shown phenotypically to transfer antibiotic resistance determinants using a conjugation mating system in which Flavobacterium was the donor and Escherichia coli DH5- alpha was the recipient. This experiment suggests that it may be possible for Flavobacterium strains to transfer their multiple antibiotic resistance determinants to human pathogenic bacterial strains. Importantly, none of the hatcheries from which the Flavobacterium isolates were obtained had ever used antibiotics to treat their fish stock. It is possible that there is another selective agent responsible for the development of antibiotic resistance in the absence of antibiotic pressure. Mercury is one possible candidate, as all of the strains tested were resistant to mercuric chloride and it is known that genes encoding antibiotic resistance can be carried on the same mobile genetic elements that encode for mercury resistance. Preliminary data also suggest that the majority of the Flavobacterium isolates contain genes for mercuric ion reduction, which would confirm the mercury resistance genotype.

Impervious Surfaces of Maine

http://digitalcommons.colby.edu/atlasofmaine2008/1009/thumbnail.jpg

A SPATIAL ANALYSIS OF IMPERVIOUS SURFACES AT COLBY COLLEGE IN 1965 AND 2006

http://digitalcommons.colby.edu/atlasofmaine2006/1019/thumbnail.jpg

A Broad-spectrum mer Operon in a Multi-drug Resistant Strain of the Fish Pathogen, Aeromonas salmonicida.

Aeromonas salmonicida AS03, a potential fish pathogen, was isolated from Atlantic salmon, Salmo salar, in 2003. This strain was found to be resistant to ≥1000 mM HgCl2 and ≥32 mM phenylmercuric acetate as well as multiple antimicrobials. Mercury (Hg) and antibiotic resistance genes are often located on the same mobile genetic elements, so the genetic determinants of both resistances and the possibility of horizontal gene transfer were examined. Specific PCR primers were used to amplify and sequence distinctive regions of the mer operon. A. salmonicida AS03 was found to have a pDU1358-like broad-spectrum mer operon, containing merB as well as merA, merD, merP, merR and merT, most similar to Klebsiella pneumonaie plasmid pRMH760. To our knowledge, the mer operon has never before been documented in Aeromonas spp. PCR and gene sequencing were used to identify class 1 integron associated antibiotic resistance determinants and the Tet A tetracycline resistance gene. The transposase and resolvase genes of Tn1696 were identified through PCR and sequencing with Tn21 specific PCR primers. We provide phenotypic and genotypic evidence that the mer operon, the aforementioned antibiotic resistances, and the Tn1696 transposition module are located on a single plasmid or conjugative transposon that can be transferred to E. coli DH5α through conjugation in the presence of low level Hg and absence of any antibiotic selective pressure. Additionally, the presence of low-level Hg or chloramphenicol in the mating media was found to stimulate conjugation, significantly increasing the transfer frequency of conjugation above the transfer frequency measured with mating media lacking both antibiotics and Hg. This research demonstrates that mercury indirectly selects for the dissemination of the antibiotic resistance genes of A. salmonicida AS03.

A broad-spectrum mer operon in a multi-drug resistant strain of the fish pathogen, Aeromonas salmonicida

Aeromonas salmonicida AS03, a potential fish pathogen, was isolated from Atlantic salmon, Salmo salar, in 2003. This strain was found to be resistant to ≥1000 mM HgCl2 and ≥32 mM phenylmercuric acetate as well as multiple antimicrobials. Mercury (Hg) and antibiotic resistance genes are often located on the same mobile genetic elements, so the genetic determinants of both resistances and the possibility of horizontal gene transfer were examined. Specific PCR primers were used to amplify and sequence distinctive regions of the mer operon. A. salmonicida AS03 was found to have a pDU1358-like broad-spectrum mer operon, containing merB as well as merA, merD, merP, merR and merT, most similar to Klebsiella pneumonaie plasmid pRMH760. To our knowledge, the mer operon has never before been documented in Aeromonas spp. PCR and gene sequencing were used to identify class 1 integron associated antibiotic resistance determinants and the Tet A tetracycline resistance gene. The transposase and resolvase genes of Tn1696 were identified through PCR and sequencing with Tn21 specific PCR primers. We provide phenotypic and genotypic evidence that the mer operon, the aforementioned antibiotic resistances, and the Tn1696 transposition module are located on a single plasmid or conjugative transposon that can be transferred to E. coli DH5α through conjugation in the presence of low level Hg and absence of any antibiotic selective pressure. Additionally, the presence of low-level Hg or chloramphenicol in the mating media was found to stimulate conjugation, significantly increasing the transfer frequency of conjugation above the transfer frequency measured with mating media lacking both antibiotics and Hg. This research demonstrates that mercury indirectly selects for the dissemination of the antibiotic resistance genes of A. salmonicida AS03.

A Spatial Analysis of Impervious Surfaces at Colby College in 1965 and 2006

Roads, parking lots, buildings, and other impervious surfaces do not allow rainwater to infiltrate the ground. As a result, they can lead to an increase in runoff to nearby ditches and streams, as well as a greater influx of pollutants such as motor oil that can often be found on paved surfaces. For this project, GIS was used to find the total area covered by impervious surfaces on the Colby campus, and to show how this area has grown in the past 40 years. It was found that new development on the campus has lead to a 56% increase in impervious surfaces at Colby since 1965.

Multidrug-resistant Shiga toxin-producing Escherichia coli in dogs with diarrhea

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Prevalence and antimicrobial resistance patterns of methicillin-resistant staphylococci (MRS) isolated in a Veterinary Teaching Hospital in Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Anthelmintic efficacy of oral trichlorfon solution against ivermectin resistant nematode strains in cattle

Infected calves from two different rural estates in Brazil were studied to assess the anthelmintic efficacy of oral trichlorfon against naturally occurring ivermectin resistant parasitic nematode strains. In experiment 1, infected animals were from a region where ivermectin resistant populations of Haemoncus placei, Cooperia punctata,Cooperia spatulata and Trichuris discolor have recently been identified. Six calves with natural gastrointestinal nematode infections were treated with 48.5 mg/kg aqueous trichlorfon administered orally and six calves acted as a non-treated control group. In experiment 11 24 naturally infected calves were selected to enter one of four treatment groups, six animals each received: 48.5 mg/kg oral trichlorfon; 200 mu g/kg subcutaneous 1% ivermectin; 630 mu g/kg subcutaneous 3.15% ivermectin; or no treatment (control group). Gastrointestinal helminths were counted and identified post-mortem at 7 days (trichlorfon and 1% ivermectin treated and untreated animals) or 14 days (3.15% ivermectin treated and untreated animals) after administration of the test agents. Experiment I identified a high level efficacy for oral trichlorfon against four helminth species that have previously been shown to be ivermectin resistant in this geographical region: percentage efficacy was 99.82% against adult H. placei, 99.18% against C. punctata, 99.33% against C. spatulata, 81.06% against T. axei, 98.46% against Oesophagostomum radiatum and 100% against T. discolor. Trichlorfon also showed activity against the ivermectin (1% and 3.15%) resistant helminth species identified in experiment 11, attaining efficacy levels of 99.17% against H. placei, 98.46% against C punctata and 100.00% against T. discolor. These findings indicate that oral trichlorfon is an effective treatment option in the management of cattle infected with ivermectin resistant helminths. (C) 2009 Elsevier B.V. All rights reserved.

Prevalence of Methicillin-Resistant Staphylococci on a Farm: Staff can Harbour MRS When Animals do Not

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Weak phenotypic reversion of ivermectin resistance in a field resistant isolate of Haemonchus contortus by verapamil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Secretory process of salivary glands of female Amblyomma cajennense (Acari: Ixodidae) ticks fed on resistant rabbits

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Validation of microsatellite markers for assisted selection of soybean genotypes resistant to powdery mildew

Powdery mildew is one of the most serious diseases of soybean and is found in all producing countries. The purpose of this study was to validate microsatellite markers previously identified as associated with resistance to powdery mildew in soybean. The study was conducted in two F, parent populations with contrasting resistance to powdery mildew, In the analysis 10 SSR primers were used for the populations. and tour polymorphic markers were identified for cross I (MGBR95-20937 x IAC-Foscarin 31) and three for cross 2 (MGBR-46 x Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) 48). The Chi-square analysis of the phenotypic evaluation confirmed the expected segregation (3: 1) of a dominant gene related to resistance. The polymorphic markers also segregated as expected (1:2:1). The markers Sat 366 and Sat 393 in the crosses 1 and 2. respectively, located at 9.41 and 12.45 cM from the gene. were considered promising for marker-assisted selection for resistance to powdery mildew in soybean. at a selection efficiency of 92.7% and 60.3% respectively.