Modelo petrofísico 3D do Arenito Namorado no Campo de Namorado - Bacia de Campos, RJ

The Namorado Oil Field represents the beginning of the oil exploration in Brazil, in the 70s, and it is still a subject of researches because the importance of this turbidite sandstone in the brazilian oil production. The Namorado’s production level was denominated “Namorado sandstone”, it is composed by turbidite sandstone deposited during the Albian-Cenomanian. In order to define the structural geometry of the main reservoir, geological and geophysical tools like RECON and Geographix (Prizm – Seisvision) softwares were used, and its application was focused on geological facies analysis, for that propose well logs, seismic interpretation and petrophysical calculations were applied. Along this work 15 vertical wells were used and the facies reservoirs were mapped of along the oil field; it is important to mentioned that the all the facies were calibrated by the correlation rock vs log profile, and 12 reservoir-levels (NA-1, NA-2, NA-3, NA-4, NA-5, NA-6, NA-7, NA-8, NA-9, NA-10, NA-11 e NA-12) were recognized and interpreted. Stratigraphic sections (NE-SW and NW-SE) were also built based on stratigraphic well correlation of each interpreted level, and seismic interpretation (pseudo-3D seismic data) on the southeastern portion of the oil field. As results it was interpreted on two- and three-dimensional maps that the deposition reservoir’s levels are hight controlled by normal faults systems. This research also shows attribute maps interpretation and its relationship with the selection of the reservoir attribute represented on it. Finally the data integration of stratigraphic, geophysical and petrophysical calculations lets us the possibility of obtain a detail geological/petrophysical 3D model of the main reservoir levels of “Namorado sandstone” inside the oil/gás field

Comprimidos de HPMC contendo nimesulida: preparação, caracterização e estudo dos mecanismos que regem a liberação do fármaco

The pharmaceutical innovations, such as the use of polymers to control drug release, create possibilities for a better action of the drug in the body, which causes a a more effective therapeutic effect and a safer treatment for the patient. In this work, were prepared and characterized matrix tablets of hydroxypropylmethylcellulose (HPMC) containing nimesulide as model drug to evaluate the performance as a controlled release system. HPMC, a cellulose ester, is a hydrophilic polymer that undergoes swelling, i.e., absorbs water and forms a gel layer controlling drug release. The characterization of powders was performed by analysis of particle size and morphology, density, compressibility index determination, flow properties and determination of swelling profile. The tablets were evaluated according to their physical parameters of quality and to the in vitro release of nimesulide, as well as the analysis of the mechanisms of drug release by appropriate mathematical models. The set of results showed that the HPMC/Nimesulide mixture exhibited satisfactory physical characteristics (size, shape, density and flow). The release profile demonstrated an effective control upon drug release in enteric environment and presented more correlation with Korsmeyer-Peppas’ and Weibull’s mathematical models, indicating that the release of nimesulide occurs through the relaxation of the polymer chains

Influência do uso de malhas de sombreamento azul, vermelha e preta no desenvolvimento inicial do pepino Taiko

Cucumber (Cucumis sativus L.) is a plant of the Cucurbitaceae family of great commercial importance and their culture is widespread throughout the country. The production of vegetables, high-quality care begins with training ranging from seedlings and shading techniques have an important role in creating environments more conducive to the production of seedlings and many researchers and producers of seedlings have opted for the use of color shading screens, making this way, the wavelength and the amount of incident energy are changed in favor of the plants. Work will be performed at the Department of Forest Sciences, Faculty of Agricultural Sciences, Universidade Estadual Paulista (UNESP), Botucatu campus. The statistical design will be in three blocks, each containing 100 plots of each treatment (seedlings covered with blue screen, red and black). Evaluations of dry mass and height will be made at 7, 14, 21 and 28 days after emergence, and 5 will be selected seedlings of each treatment. At 14 and 28 DAE was measured, and SPAD chlorophyll content at 30 DAE, was evaluated by measuring gas exchange in the second pair of leaves, fully expanded for each plant, which was put in a chamber controlled with infrared gas analyzer (IRGA LI 6400, Licor) to perform measurements of photosynthesis. Treatment with black shading showed statistically better results for total dry matter, plant height, SPAD chlorophyll content and net assimilation of CO2, showing a better quality seedlings and its use is recommended in the cultivation of cucumber Taiko

Crescimeno de apatita na superfície da liga Ti-7, 5Mo empregando tratamento higrotérmico

The objective of the present work was to evaluate surface of experimental alloy Ti-7.5Mo after hydrothermal treatment. Ingots were obtained in arc melting furnace under an argon atmosphere and then homogenized under vacuum at 1100ºC for 86.4 ks to eliminate chemical segregation and after cold worked discs were cutting and grinding. For surface treatment, samples were immersed in a container with NaOH aqueous solution 5M, autoclaved, washed with distilled water. Followed, samples were heat treated and they were soaking in 5xSBF to form an apatite layer on the surface. Surfaces were investigated by, scanning electron microscopy, X-Rays powder diffraction, atomic force microscopy and contact angle, in order to evaluate the wettability of the alloy surface. The results were compared with our previous studies using the group of chemical surface treatments and results shows better condition is 120 minutes in the autoclave

Efeitos do treinamento físico sobre o perfil metabólico, ósseo, endócrino e leucocitário de ratos recém-desmamados

As influências do exercício físico crônico sobre o tecido ósseo e hematológico de ratos Wistar têm sido investigados na literatura, porém são raros os trabalhos que abordam tais aspectos numa faixa etária mais precoce, na qual os efeitos podem ser benéficos ou até prejudiciais ao desenvolvimento. Assim, os principais objetivos deste estudo foram investigar os efeitos do treinamento físico regular e predominantemente aeróbio sobre aspectos endócrinos e metabólicos, sobre o tecido ósseo e sistema imunológico. Foram utilizados ratos machos, da linhagem Wistar, recém-desmamados (30 dias), mantidos no Biotério do Laboratório de Biodinâmica do Departamento de Educação Física, sob condições controladas (temperatura ambiente controlada de 25ºC e fotoperíodo de 12h claro/12h escuro). Os animais foram distribuídos em dois grupos experimentais: grupo sedentário (GS) e grupo treinado (GT). Os animais treinados foram submetidos a um protocolo de natação, 5 vezes/semana, 1 hora/dia, com carga de 5% em relação ao peso corporal, durante 6 semanas consecutivas, em água com temperatura controlada (32±2ºC). Ao final do período experimental, foram coletadas amostras de sangue para contagem total e diferencial de leucócitos e hematócrito. Após o sacrifício, foram coletadas amostras de soro para dosagem de glicose, proteínas totais, triglicérides, colesterol e amostras do fígado e músculo para a determinação dos teores de glicogênio, e tíbia para determinação do comprimento e área ósseas. Os dados foram apresentados como média ± desvio padrão. Para identificar diferenças estatísticas entre os grupos utilizou-se teste-t de Student para amostras independentes. O nível de significância foi pré-estabelecido em 5%. Pôde-se constatar que o treinamento físico regular realizado ...(Resumo completo clicar acesso eletrônico abaixo)

Desenvolvimento de filmes finos de Bi3NbO7 pelo método dos precursores poliméricos em diferentes eletrodos óxidos

Technology always advances and thus the device miniaturization and improved performance, besides multifunctionality, they become extremely necessary. A wave of research on the area tends to grow in number and importance in today's market, it is necessary to search for new materials, new applicability of the existing ones and new processes for increasingly cheaper costs. Dielectric materials are considered a key element in this sector being the main electrical properties its high dielectric constant and low dielectric loss. The Polymeric Precursor Method appears as a good alternative because is a low cost, simple process with controlled stoichiometry. In this method, two steps were performed. In a first step, the precursor solution was decomposed into powders and in a second step the precursor solution was converted in thin films. In this work, was used the polymeric precursor methods to get thin films where they were heat treated and characterized by XRD, SEM and AFM. We have obtained Bi3NbO7 thin films with good homogeneity and uniform distribution of grains were noted. We observed that the best condition to obtain the tetragonal phase is annealing the film at high temperatures for a longer soaking time and with excess of bismuth. Several oxides electrodes were evaluated aiming to obtain textured dielectric thin films

Achados clínicos, hemodinâmicos e hemogasométricos da infusão contínua de propofol associado ou não ao tramadol em ovelhas submetidas à videolaparoscopia

Pós-graduação em Cirurgia Veterinária - FCAV

Processamento do alho negro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Microencapsulação de óleo de palma por coacervação complexa em matrizes de gelatina/goma arábica e gelatina/alginato

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Controlador PID utilizando microcontrolador PIC

This monograph proposes the implementation of a low cost PID controller utilizing a PIC microcontroller, and its application in a positioning system previously controlled by a dedicated integrated circuit for a positioning system. Applying the closed-loop PID control, the system instability was reduced, and its response was smoother, eliminating vibrations and mechanical wear compared to its response with the dedicated integrated circuit, which has a very limited control action. The actuator of the system is a DC motor, whose speed is controlled by the Pulse Width Modulation (PWM) technique, using a Full-Bridge circuit, allowing the shift of direction of rotation. The utilized microcontroller was the PIC16F684, which has an enhanced PWM module, with its analog converters used as reference and position feedback. The positioning sensor is a multiturn potentiometer coupled to the motor axis by gears. The possibility of programming the PID coefficients in the microcontroller, as well as the adjustment of the sampling rate, allows the implemented system achieving high level of versatility

Imagens de satélite na análise da relação entre queimadas, aerossóis atmosféricos e precipitação

The direct and indirect effects of atmospheric aerossols in the amazonic climate have been focus of many published. This work aims to analyze a possible relation among Burns, atmospheric aerossols and precipitation above South America. It uses the avaluable data from the satellites AQUA/TERRA and TRMM and the images furnished by NOAA and GOES. These analysis can provide some explanations about the effects of emission of aerosols by burns on the composition of atmosphere and cloud formation, mainly in Amazon. We use the Aerosol Optical Depth (AOD) from MODIS/TERRA-AQUA, burns index from CPTEC and rain rate from TRMM. The data we use were obtained from 2000 until 2012. The study is divided in two parts. In the first one, it was performed a quantitative analysis between number of burns and aerosols emission. It was identified a great variability in space and time of the AOD on South America. On the north, northeast and center-west, the AOD is significant during the winter period, with peak on August and September. The southeast is affected by aerosols from center-west due to the dynamical transport. In the second part, it was evaluated the relation between AOD and precipitation in a 13-year period. The statistical analysis shows up a negative correlation of 0.72 between August and October, on Legal Amazon. These result indicate an inverse relation between AOD and rain rate. The other months present not significant correlation. These results are in a good agreement with the literature, in which in-situ methods were applied or combined with satellites data. The increasing of aerosols concentration in the atmosphere are reinforced during drier years. It can affect the increasing process of water drops, decreasing the precipitation. We also verified higher values of AOD (0.25 - 0.3) during years with El Niño, than the climatologically average (~0.15 - 0.2), ... (Complete abstract click electronic access below)

Crescimento de apatita na superfície da liga Ti-25Ta empregando dois tipos de tratamento de superfície: biomimético e deposição de polímero por eletrofiação

Titanium and its alloys has been widely used as materials for metallic biomaterials implants are usually employed to restore the hard tissue function, being used for artificial joints and bones, synthetic plates, crowns, dental implants and screws . Objective of this work was the surface modification of Ti-alloy 25Ta from biomimetic surface treatment of employment and deposition of polymer by electrospinning. The league was obtained from the fusion of the pure elements in the arc furnace with controlled atmosphere. The ingots were subjected to heat treatment, cold forged and sectioned discs with 13 mm diameter and 3 mm thick. Two surface treatments was evaluated, biomimetic and electrospinning with PCL fiber. The biomimetic treatment was performed involving alkaline treatment for three molarities 1.5M, 3M and 5M with immersion in SBF. The electrospinning was performed using PCL polymer alloy surface after the alkali treatment Ti25Ta 1M. For this group the polymer coated surfaces were immersed in calcium phosphate containing solution for immobilization of apatite. The results were compared with previous studies using surface treatment group to verify hydroxyapatite formation on the sample surface and it is concluded that the best condition is biomimetic treatment with 5M alkali treatment and heat treatment at 80 ° C for 72 hours

Influência do exercício físico no remodelamento cardíaco de ratos espontaneamente hipertensos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Screening of Conditions for the Preparation of Poly( -Caprolactone) Nanocapsules Containing the Local Anesthetic Articaine

The local anesthetic articaine (ATC) is widely used in dentistry; however, its side effects can include paresthesia and nerve injury. Polymeric nanocapsules (PN) can be used as carriers for drugs, and help to reduce undesirable symptoms. The objective of this study was to evaluate the influence of different factors on the average size, polydispersion, and encapsulation efficiency of PN containing ATC. Poly(ε-caprolactone) (PCL) nanocapsules containing ATC were prepared by the oil-in-water emulsion/solvent evaporation method. The final ATC concentration was 2%. The preparation conditions were optimized using a central composite blocked cube-star design to investigate the influence of two variables at five levels, with 22 factorial points (–1 and +1), two replicates of the central point, 2×2 axial points (–1.414 and +1.414), and an orthogonal distribution, resulting in 10 experiments. The factors varied were the PVA concentration and the sonication time. The nanocapsules showed a satisfactory size range, a polydispersivity index less than 0.2, and high encapsulation efficiency. The values of the factors had no significant influence on either average size or polydispersion, although the encapsulation efficiency was significantly influenced by the sonication time. Improved formulations were identified using the central composite design, which revealed that the main consideration in selecting a suitable formulation was the encapsulation efficiency. Two of the formulations showed both high encapsulation efficiency and colloidal characteristics appropriate for the route of administration.

Liberação de componentes do extrato de Casearia sylvestris Swartz empregando membranas de látex natural como suporte

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)