Estresse, depressão e suporte familiar em pacientes em diálise peritoneal e hemodiálise

Pós-graduação em Psicologia do Desenvolvimento e Aprendizagem - FC

Da coordenação modular à construção modular: estudos de caso

The presented work aimed to present the Modular Construction scenario, relating it to the fundamentals assumptions on the Modular Coordination Theory. The presentation of this theory, its historical development, its scope and tools, were conceived to further, show how the applicability on the conceptual and design phases is done. Also, studies cases are shown, in order to illustrate didactically how this process occurs. Basing on these studies, considerations are made about the use of modulation in projects in Brazil, at the expense of what happens on the international scenario, to highlight the importance of Modular Coordination for raising the standards of construction quality and rationality in the country

Avaliação de lubrificantes para aplicação em componentes mecânicos pelo método de compressão do anel

The current lubricants are getting better with advancing technology and more specific to each case of application. Its use is directly linked to the level of waste by friction generated between objects in direct contact and it is essential to promote greater durability of mechanical components. This study refers to behavioral assessment of some types of lubricants and rank among them which one presents the lowest friction between metal components. For this work, will be used the method of ring compression test (RCT), after performed tests and analyzed the results, will be possible to report which lubricant will bring the best reduction in friction. The need for this work was given initially by the observation that some mechanical projects developed at FEG does not conduct in-depth studies the lubricants used. Therefore this study aims to provide better support to these projects. In this work were used five different lubricants, three oils and two greases.

O ensino de geografia e a educação ambiental: um estudo de caso com resíduos sólidos urbanos em Bauru (SP)

Pós-graduação em Geografia - IGCE

Fatores críticos de sucesso em projetos colaborativos na indústria de máquinas agrícolas

Os projetos colaborativos de novos produtos são fundamentais para que empresas aumentem o grau de inovação em seus produtos. Bons resultados dependem da identificação de fatores críticos de sucesso (FCS) e não há tais estudos na Indústria de Máquinas Agrícolas (IMA). O artigo verifica se os FCS identificados na literatura poderiam ser utilizados em levantamentos do setor e se há outros a considerar. Apresenta revisão bibliográfica e levantamento em empresa com elevado nível de maturidade em PDP frente às empresas da IMA. Empregou-se o método de estudo de caso único, do tipo incorporado. A unidade de análise são projetos do tipo colaborativo e de sucesso: dois deles no total. Identificam-se fatores que podem não ser críticos, apesar de apontados pela literatura; indica-se a existência de novos FCS e reforça-se a importância dos fatores ligados à garantia de igualdade e fatores universais de sucesso.

A representação gráfica na Revista Projeto & Design.

Esta pesquisa inicia-se pelo estudo das diferentes maneiras de representação de um projeto arquitetônico: desenhos analógicos e digitais, desenhos naturais e técnicos, desenhos auxiliados por computador, maquetes físicas e modelos digitais. Teve como objetivo analisar a representação gráfica utilizada nas publicações de obras arquitetônicas em mídias impressas especializadas, tendo sido selecionada a Revista Projeto & Design como estudo de caso. Com este estudo foi possível, por meio de bibliometria gráfica, verificar as contribuições das representações na compreensão e leitura dos projetos arquitetônicos, elencando-se e exemplificando-se as tipologias de imagens utilizadas nas últimas décadas, bem como relacionar os resultados com o momento histórico em que foram projetadas ou publicadas.

Integrated analisis of building and users: a way to reduce energy consuption

In many countries buildings are responsible for a substantial part of the energy consumption, nd it varies according to their energetic and environmental performances. The potential for major reductions in buildings consumption have bee well documented in Brazil. Opportunities have been identified throughout the life cycle of the buildings, due of projects in diverse locations without the proper adjustments. This article offers a reflection about project processes and how its understanding can be conducted in an integrated way, favoring the use of natural resources and lowering energy consumption. It concludes by indicating that the longest phase in the life cycle of a building is also the phase responsible for its largest energy consumption, not only because of its duration but also for the interaction with the end user. Therefore, in order to harvest the energy cost reduction potential from future buildings designers need a holistic view of the surrounding, end users, materials and methodologies.

Epigrafía digital: tecnología 3D de bajo coste para la digitalización de inscripciones y su acceso desde ordenadores y dispositivos móviles

[ES] Se analizan las posibilidades del Image based modeling (IBM), como técnica de escaneado 3D de bajo coste para la modelización de inscripciones romanas, a partir del trabajo realizado en el Museo Arqueológico Nacional de Madrid sobre una amplia tipología de soportes epigráficos (piedra, bronce, arcilla), con resultados óptimos para la catalogación, estudio y difusión de este tipo de documentación histórica. Los resultados obtenidos permiten obtener inscripciones romanas en 3D que se pueden incorporar a los proyectos de epigrafía digital en curso, permitiendo su acceso a través de ordenadores y dispositivos móviles, sin coste añadido para los investigadores.

TouCAN : mejora y ampliación de funcionalidades

[ES]

TouCAN es una librería creada en su primera versión (v1) como Trabajos de Fin de Grado en Ingeniería Informática por John Wu Wu y Jose Lareo Domínguez bajo la tutorización de los profesores Antonio C. Domínguez Brito y Jorge Cabrera Gámez. Define un protocolo de comunicación para la interconexión de una red de microcontroladores basados en la plataforma de prototipado electrónico Arduino. Trabaja sobre el protocolo de comunicación CAN Bus (Controller Area Network), ampliamente utilizado por la industria desde la década de los 80. TouCAN destaca por ser una librería ligera, potente y amigable. El objetivo principal de este Trabajo Final de Grado en Ingeniería Informática consiste en proporcionar robustez a la librería incorporando mejoras y nuevas funcionalidades. Entre las principales mejoras destacar el control frente a fallos de comunicación, reinicio o reset de los microcontroladores, así como la caída de los mismos. Otra característica incluida en esta revisión consiste en la asignación dinámica deidentificadores de dispositivos que conforman un sistema empotrado distribuido. Permitiendo la posibilidad de “conexión en caliente” de nuevos nodos microcontroladores a la red de forma dinámica. A estos cambios, también se han añadido mejoras en la interfaz de la API que simplifica el uso y aprendizaje de la misma. Así como una nueva herramienta denominada TouCANSniffer que permite capturar y analizar todo el tráfico generado en la red. Las nuevas características y funcionalidades añadidas en TouCAN v2 proporcionan el potencial necesario para ser considerada seriamente como base de cualquier nuevo proyecto que integre una red distribuida de microcontroladores.

Multi-parameter observations from coastal waters to the deepest trenche: challenges studying the carbón system with optode technology

[EN]This presentation will give examples on how multi-parameter platforms have been used in a variety of applications ranging from shallow coastal on-line observatories down to measuring in the deepest Ocean trenches. Focus will be on projects in which optode technology (primarily for CO2 and O2) has served to study different aspects of the carbon system including primary production/consumption, air-sea exchange, leakage detection from underwater storage of CO2 and measurements from moving platforms like gliders and ferries. The performance of recently developed pH optodes will als

Genetica molecolare dell'autismo: studi di associazione ed analisi di geni candidati

Autism is a neurodevelpmental disorder characterized by impaired verbal communication, limited reciprocal social interaction, restricted interests and repetitive behaviours. Twin and family studies indicate a large genetic contribution to ASDs (Autism Spectrum Disorders). During my Ph.D. I have been involved in several projects in which I used different genetic approaches in order to identify susceptibility genes in autism on chromosomes 2, 7 and X: 1)High-density SNP association and CNV analysis of two Autism Susceptibility Loci. The International Molecular Genetic Study of Autism Consortium (IMGSAC) previously identified linkage loci on chromosomes 7 and 2, termed AUTS1 and AUTS5, respectively. In this study, we evaluated the patterns of linkage disequilibrium (LD) and the distribution of haplotype blocks, utilising data from the HapMap project, across the two strongest peaks of linkage on chromosome 2 and 7. More than 3000 SNPs have been selected in each locus in all known genes, as well as SNPs in non-genic highly conserved sequences. All markers have been genotyped to perform a high-density association analysis and to explore copy number variation within these regions. The study sample consisted of 127 and 126 multiplex families, showing linkage to the AUTS1 and AUTS5 regions, respectively, and 188 gender-matched controls. Association and CNV analysis implicated several new genes, including IMMP2L and DOCK4 on chromosome 7 and ZNF533 and NOSTRIN on the chromosome 2. Particularly, my contribution to this project focused on the characterization of the best candidate gene in each locus: On the AUTS5 locus I carried out a transcript study of ZNF533 in different human tissues to verify which isoforms and start exons were expressed. High transcript variability and a new exon, never described before, has been identified in this analysis. Furthermore, I selected 31 probands for the risk haplotype and performed a mutation screen of all known exons in order to identify novel coding variants associated to autism. On the AUTS1 locus a duplication was detected in one multiplex family that was transmitted from father to an affected son. This duplication interrupts two genes: IMMP2L and DOCK4 and warranted further analysis. Thus, I performed a screening of the cohort of IMGSAC collection (285 multiplex families), using a QMPSF assay (Quantitative Multiplex PCR of Short fluorescent Fragments) to analyse if CNVs in this genic region segregate with autism phenotype and compare their frequency with a sample of 475 UK controls. Evidence for a role of DOCK4 in autism susceptibility was supported by independent replication of association at rs2217262 and the finding of a deletion segregating in a sib-pair family. 2)Analysis of X chromosome inactivation. Skewed X chromosome inactivation (XCI) is observed in females carrying gene mutations involved in several X-linked syndromes. We aimed to estimate the role of X-linked genes in ASD susceptibility by ascertaining the XCI pattern in a sample of 543 informative mothers of children with ASD and in a sample of 164 affected girls. The study sample included families from different european consortia. I analysed the XCI inactivation pattern in a sample of italian mothers from singletons families with ASD and also a control groups (144 adult females and 40 young females). We observed no significant excess of skewed XCI in families with ASD. Interestingly, two mothers and one girl carrying known mutations in X-linked genes (NLGN3, ATRX, MECP2) showed highly skewed XCI, suggesting that ascertainment of XCI could reveal families with X-linked mutations. Linkage analysis was carried out in the subgroup of multiplex families with skewed XCI (≥80:20) and a modest increased allele sharing was obtained in the Xq27-Xq28 region, with a peak Z score of 1.75 close to rs719489. In this region FMR1 and MECP2 have been associated in some cases with austim and therefore represent candidates for the disorder. I performed a mutation screen of MECP2 in 33 unrelated probands from IMGSAC and italian families, showing XCI skewness. Recently, Xq28 duplications including MECP2, have been identified in families with MR, with asymptomatic carrier females showing extreme (>85%) skewing of XCI. For these reason I used the sample of probands from X-skewed families to perform CNV analysis by Real-time quantitative PCR. No duplications have been found in our sample. I have also confirmed all data using as alternative method the MLPA assay (Multiplex Ligation dependent Probe Amplification). 3)ASMT as functional candidate gene for autism. Recently, a possible involvement of the acetylserotonin O-methyltransferase (ASMT) gene in susceptibility to ASDs has been reported: mutation screening of the ASMT gene in 250 individuals from the PARIS collection revealed several rare variants with a likely functional role; Moreover, significant association was reported for two SNPs (rs4446909 and rs5989681) located in one of the two alternative promoters of the gene. To further investigate these findings, I carried out a replication study using a sample of 263 affected individuals from the IMGSAC collection and 390 control individuals. Several rare mutations were identified, including the splice site mutation IVS5+2T>C and the L326F substitution previously reported by Melke et al (2007), but the same rare variants have been found also in control individuals in our study. Interestingly, a new R319X stop mutation was found in a single autism proband of Italian origin and is absent from the entire control sample. Furthermore, no replication has been found in our case-control study typing the SNPs on the ASMT promoter B.

Packet Level Coding for Mobile Broadcasting

The thesis deals with channel coding theory applied to upper layers in the protocol stack of a communication link and it is the outcome of four year research activity. A specific aspect of this activity has been the continuous interaction between the natural curiosity related to the academic blue-sky research and the system oriented design deriving from the collaboration with European industry in the framework of European funded research projects. In this dissertation, the classical channel coding techniques, that are traditionally applied at physical layer, find their application at upper layers where the encoding units (symbols) are packets of bits and not just single bits, thus explaining why such upper layer coding techniques are usually referred to as packet layer coding. The rationale behind the adoption of packet layer techniques is in that physical layer channel coding is a suitable countermeasure to cope with small-scale fading, while it is less efficient against large-scale fading. This is mainly due to the limitation of the time diversity inherent in the necessity of adopting a physical layer interleaver of a reasonable size so as to avoid increasing the modem complexity and the latency of all services. Packet layer techniques, thanks to the longer codeword duration (each codeword is composed of several packets of bits), have an intrinsic longer protection against long fading events. Furthermore, being they are implemented at upper layer, Packet layer techniques have the indisputable advantages of simpler implementations (very close to software implementation) and of a selective applicability to different services, thus enabling a better matching with the service requirements (e.g. latency constraints). Packet coding technique improvement has been largely recognized in the recent communication standards as a viable and efficient coding solution: Digital Video Broadcasting standards, like DVB-H, DVB-SH, and DVB-RCS mobile, and 3GPP standards (MBMS) employ packet coding techniques working at layers higher than the physical one. In this framework, the aim of the research work has been the study of the state-of-the-art coding techniques working at upper layer, the performance evaluation of these techniques in realistic propagation scenario, and the design of new coding schemes for upper layer applications. After a review of the most important packet layer codes, i.e. Reed Solomon, LDPC and Fountain codes, in the thesis focus our attention on the performance evaluation of ideal codes (i.e. Maximum Distance Separable codes) working at UL. In particular, we analyze the performance of UL-FEC techniques in Land Mobile Satellite channels. We derive an analytical framework which is a useful tool for system design allowing to foresee the performance of the upper layer decoder. We also analyze a system in which upper layer and physical layer codes work together, and we derive the optimal splitting of redundancy when a frequency non-selective slowly varying fading channel is taken into account. The whole analysis is supported and validated through computer simulation. In the last part of the dissertation, we propose LDPC Convolutional Codes (LDPCCC) as possible coding scheme for future UL-FEC application. Since one of the main drawbacks related to the adoption of packet layer codes is the large decoding latency, we introduce a latency-constrained decoder for LDPCCC (called windowed erasure decoder). We analyze the performance of the state-of-the-art LDPCCC when our decoder is adopted. Finally, we propose a design rule which allows to trade-off performance and latency.

Il rapporto architettura – suolo nell’opera di Aldo Rossi

La ricerca muove dal presupposto che l’opera di Aldo Rossi sia stata analizzata finora secondo un criterio tipologico. Tale approccio è una tra le possibili chiavi di lettura del lavoro dell’architetto. Nel tentativo di individuare un’interpretazione dell’opera di Rossi legata a sistemi immutabili nel tempo si è ritenuto necessario approfondire la relazione che si stabilisce tra la sua opera e il suolo. Attraverso la definizione di due categorie di lettura dei progetti dell’autore, che si basano su continuità o discontinuità fisica del progetto rispetto al suolo, si comprende come il rapporto tra area e progetto produca nel tempo soluzioni ricorrenti. In base a questa interpretazione muro e pilastro costituiscono due elementi fondamentali del linguaggio di Rossi. Essi a loro volta si allacciano ad un sistema di riferimento più ampio di cui tettonica e arte muraria sono i capisaldi. La ricerca si articola in tre parti, all’interno delle quali sono sviluppati specifici capitoli. La prima parte, sistema di riferimento, è necessaria a delineare un vocabolario utile per isolare il tema trattato. Essa è fondamentale per comprendere la posizione occupata da Rossi rispetto alle esperienze verificatesi nel corso della storia, relativamente al rapporto spazio - architettura - suolo. La seconda parte, arte muraria, serve a mettere in luce l’influenza che la componente massiva e plastica del terreno ha determinato nella definizione di specifiche soluzioni progettuali. La terza parte, tettonica, delinea invece un approccio opposto al precedente, individuando quei progetti in cui il rapporto col suolo è stato sminuito o addirittura negato, aumentando il senso di sospensione dei volumi nello spazio. In definitiva, l’influenza che il rapporto col suolo ha determinato sulle scelte progettuali di Rossi rappresenta l’interrogativo principale di questa ricerca.

Studio di alcuni tratti del temperamento nel cane

Il temperamento può essere definito come l’attitudine che un cane esprime verso le persone e verso altri animali, la combinazione di tratti fisici e mentali, acquisiti e non, che determinano il comportamento del cane. Tale parametro delinea perciò il carattere di un individuo, inclinazioni e tendenze, eccitabilità, tristezza, rabbia e il modo caratteristico di comportarsi di un individuo, con particolare riferimento alle interazioni sociali. La presente tesi di Dottorato rappresenta uno studio su alcuni tratti del temperamento nel cane domestico elaborato in 3 progetti sperimentali. Nei primi due progetti sono state analizzate le differenze attitudinali tra alcune razze canine attraverso l’applicazione di un test di temperamento in cuccioli di 60 giorni e in cani adulti, per valutare e confrontarne il temperamento, la socialità ed identificare profili tipici di razza. Nel terzo progetto un campione di cani morsicatori di canile e di proprietà è stato confrontato con due rispettivi gruppi di controllo. Analizzando i risultati è stato possibile mettere in evidenza caratteristiche di razza omogenee nell’interazione con stimoli inanimati, nelle interazioni sociali e in relazione alla possessività e sono stati delineati profili di razza sia nei cuccioli sia negli adulti. Si sono tuttavia, osservate variabilità individuali, intra-razza e intra-cucciolata, a testimonianza dell’influenza complessa e multifattoriale delle componenti genetica e ambientale sul comportamento dei cani. Il confronto tra cani morsicatori di canile e di proprietà ha messo in luce interessanti differenze tra i soggetti in termini di reattività, socievolezza, propensione all’interazione con il proprietario o con un estraneo, comportamenti di evitamento e velocità di reazione agli stimoli presentati. Il test applicato è risultato un valido strumento per valutare il temperamento di cani dichiarati aggressivi che sono stati sottoposti a situazioni nuove e a stimoli sconosciuti per poter ottenere una migliore visione d’insieme del temperamento del soggetto.

Sustainable processes using heterogeneous acid catalysts. Some examples of industrial interest.

In recent years the need for the design of more sustainable processes and the development of alternative reaction routes to reduce the environmental impact of the chemical industry has gained vital importance. Main objectives especially regard the use of renewable raw materials, the exploitation of alternative energy sources, the design of inherently safe processes and of integrated reaction/separation technologies (e.g. microreactors and membranes), the process intensification, the reduction of waste and the development of new catalytic pathways. The present PhD thesis reports results derived during a three years research period at the School of Chemical Sciences of Alma Mater Studiorum-University of Bologna, Dept. of Industrial Chemistry and Materials (now Dept. of Industrial Chemistry “Toso Montanari”), under the supervision of Prof. Fabrizio Cavani (Catalytic Processes Development Group). Three research projects in the field of heterogeneous acid catalysis focused on potential industrial applications were carried out. The main project, regarding the conversion of lignocellulosic materials to produce monosaccharides (important intermediates for production of biofuels and bioplatform molecules) was financed and carried out in collaboration with the Italian oil company eni S.p.A. (Istituto eni Donegani-Research Center for non-Conventional Energies, Novara, Italy) The second and third academic projects dealt with the development of green chemical processes for fine chemicals manufacturing. In particular, (a) the condensation reaction between acetone and ammonia to give triacetoneamine (TAA), and (b) the Friedel-Crafts acylation of phenol with benzoic acid were investigated.