River Bovey (main Teign tributary) fisheries survey 1978

This is the River Bovey (main Teign tributary) fisheries survey 1978 report produced by South West Water Authority in 1978. The aim of this report is to confirm or disprove the presence of alien coarse fish species thought present in the Bovey system. A chosen site was electro fished using D.C. methods wading upstream. All fish taken were measured and identified. Since it was not possible to distinguish between the young parr stages of migratory and non migratory trout, all parr taken have been included under the heading of Brown trout whereas in fact some of these parr may become migratory later in their life cycle.

Estimating long-term growth-rate changes of southern bluefin tuna (Thunnus maccoyii) from two periods of tag-return data

Southern bluefin tuna (SBT) (Thunnus maccoyii) growth rates are estimated from tag-return data associated with two time periods, the 1960s and 1980s. The traditional von Bertalanffy growth model (VBG) and a two-phase VBG model were fitted to the data by maximum likelihood. The traditional VBG model did not provide an adequate representation of growth in SBT, and the two-phase VBG yielded a significantly better fit. The results indicated that significant change occurs in the pattern of growth in relation to a VBG curve during the juvenile stages of the SBT life cycle, which may be related to the transition from a tightly schooling fish that spends substantial time in near and surface shore waters to one that is found primarily in more offshore and deeper waters. The results suggest that more complex growth models should be considered for other tunas and for other species that show a marked change in habitat use with age. The likelihood surface for the two-phase VBG model was found to be bimodal and some implications of this are investigated. Significant and substantial differences were found in the growth for fish spawned in the 1960s and in the 1980s, such that after age four there is a difference of about one year in the expected age of a fish of similar length which persists over the size range for which meaningful recapture data are available. This difference may be a density-dependent response as a consequence of the marked reduction in the SBT population. Given the key role that estimates of growth have in most stock assessments, the results indicate that there is a need both for the regular monitoring of growth rates and for provisions for changes in growth over time (possibly related to changes in abundance) in the stock assessment models used for SBT and other species.

Growth, osmoregulation and ion accumulation in the coastal halophyte Arthrocnemum indicum under field conditions

Life cycle and population biology of a perennial halophyte Arthrocnemum indicum Willd, was studied from February 1992 to January 1993. During the 12 months, the population was exposed to great variations in soil salinity from 35 to 58 ms/cm2 and soil moisture ranging from flood to drought levels. Seasonal changes in dry weight are directly related to soil salinity stress. When salinity levels become low, the dry matter production increases. A little increase in dry weight from April to July indicates that more negative soil water potentials were limiting plant growth. Proline content increased considerably during the dry season with a corresponding increase in salinity. Water soluble oxalate did not vary much with changes in salinity.

Distribuçāo e biologia das espécies de camarāo de águas pouco profundas

This study investigates the life cycle of the two major commercial species of prawns in Mozambique - Penaeus indicus and Metapenaeus monoceros - and their prime nursery microhabitats in the mangrove swamps.

A study on growth of Metapenaeus monoceros (Fabricius) of Maputo Bay

Biological data on Metapenaeus monoceros has been regularly collected in Maputo Bay since 1968. The main objective of this report is to study growth as a function of the size, since this is one of the basic parameters for population dynamics. As the possibility of studying shrimp growth by modal progression analysis depends very much on the space-time configuration of sampling, the years 1968 and 1969 were chosen to study growth of the population available to the bottom trawl used by the fishing industry. In those years sampling was very frequent (twice a week) and the samples were collected from a rather small fishing area. Complementary data on the spawning, juvenile phase and recruitment to the fishery was used to establish the relationship between the different stages of the life cycle and to obtain an age/length key. Data on juveniles in estuaries was only available for 1969 and 1973.

Prognosis of underground structures deterioration based on in-situ measurements

The stability of the underground structure is very important not only from the point of view of the structure itself, but also from the point of view of other structures. Therefore, the evaluation of the process of deterioration can help us very much. In the first part of the paper the ageing of the structures in the scope of their life cycle will be described. The whole process of deterioration is important but limited to certain time intervals and is able to give signals about changes in macro-scale. The second part of the paper is focused on the adaptation of new methods: micro technology of monitoring - such as MEMS (Micro Electrical Mechanical Systems) and wireless technologies for data transfer. It is obvious that such new technologies have to be assessed for the ability to deliver data continuously and for their safety and solidity. At the end of the paper the application of the measurements on the Prague metro's lining is mentioned. © 2007 Taylor & Francis Group.

Pond production of Artemia in Pakistan

Currently our government and the private sectors are very much interested in the establishment of marine aquaculture. For the successful operation in aquaculture of finfishes and shellfishes, the basic requirement is the suitable diet, apart from proper environment. For the larvae, juveniles and adult stages of the culturing organisms the live Artemia is the ideal food. The aquaculturists the worldover are using live food for their culturing organisms, as the live food played an important role in the dietary management of aquaculture of finfishes and shellfishes (Sorgeloos and Kulasekarapandian, 1984), particularly during larval stages. The live nauplii of Artemia are used in aquaculture of finfishes and shellfishes due to being nutritionally balanced, non polluting, economically bearable, viable and readily acceptable to the culturing species. The adult Artemia is also used for feeding the aquarium fishes particularly so when there is a clear abundance of this resource which is cheaper and can economically compete with alternative artificial diet. By the use of Artemia the aquaculturists may obtain optimum growth and survival rate of the organisms. The life cycle of Artemia is very short, which is completed within two weeks especially during dry season in highly saline waters, the two weeks old Artemia starts producing cysts. These cysts become ready to harvest within a week.

D77, one benzoic acid derivative, functions as a novel anti-HIV-1 inhibitor targeting the interaction between integrase and cellular LEDGF/p75

Integration of viral-DNA into host chromosome mediated by the viral protein HIV-1 integrase (IN) is an essential step in the HIV-1 life cycle. In this process, Lens epithelium-derived growth factor (LEDGF/p75) is discovered to function as a cellular co-fa

Investigation on biodiversity and population structure of Penaeus sernisulcatus [sic] in northern waters of Persian Gulf

Green tiger prawn, Penaeus sentisulcatus is one of the commercial species of Persian Gulf, which is distributed from north to Strait of I Iormoze. Concerning its role in fisheries economic, various research projects on stock assessment, biology and aquaculture has been conducted. This research is targeted the identification of various populations of green tiger prawn in northern waters of Persian Gulf. The area has been divided to five regions from north to south named; Bahrakan, Boushehr, Tangestan, Motaaf and Strait of Hormoz. In each region, numbers of sampling stations trawled, and live shrimp species carried in containers equipped with air pump, to coastal laboratories in Boushehr and Bandar Abbass Fisheries Research Centers. Biometeric, morphometeric and merestic measures for 45 factars done, and peices of muscles, eye and ovary tissues dissected, and stored in liquid nitrogen. Protein extraction, and polyacrylamid gel electrophoresis by SDS-PAGE technique for tissues samples conducted. Data of 45 morphometeric and merestic characteristics analyzed by principal component analysis (PCA), and clustering analysis methods. The results of analysis showed that, the populations of Bahrakan and Mota.af regions are differentiated, while population of Boushehr and Tangestan regions were mixed, and named as a single population. The analysis of electrophoretic data also confirmed this result, and showed a distinct population in Strait of Hormoz. Therefore, this research illustrated four distinct populations for P. semisulcatus in northern area of Persian Gulf, named Bahrakan (north of Boushehr), Boushehr and Tangesta.n (adjacent), Motaaf and it's south, and Strait of Hormoz. Study of morphometeric characteristics of carapace factors, genital organs, antenna and life cycle of samples of different regions resulting identification of a subspecies, which is named Penaeus seinisuleatus persicus.

A Comparative Review of Existing Data and Methodologies for Calculating Embodied Energy and Carbon of Buildings

In the Climate Change Act of 2008 the UK Government pledged to reduce carbon emissions by 80% by 2050. As one step towards this, regulations are being introduced requiring all new buildings to be ‘zero carbon’ by 2019. These are defined as buildings which emit net zero carbon during their operational lifetime. However, in order to meet the 80% target it is necessary to reduce the carbon emitted during the whole life-cycle of buildings, including that emitted during the processes of construction. These elements make up the ‘embodied carbon’ of the building. While there are no regulations yet in place to restrict embodied carbon, a number of different approaches have been made. There are several existing databases of embodied carbon and embodied energy. Most provide data for the material extraction and manufacturing only, the ‘cradle to factory gate’ phase. In addition to the databases, various software tools have been developed to calculate embodied energy and carbon of individual buildings. A third source of data comes from the research literature, in which individual life cycle analyses of buildings are reported. This paper provides a comprehensive review, comparing and assessing data sources, boundaries and methodologies. The paper concludes that the wide variations in these aspects produce incomparable results. It highlights the areas where existing data is reliable, and where new data and more precise methods are needed. This comprehensive review will guide the future development of a consistent and transparent database and software tool to calculate the embodied energy and carbon of buildings.

Development of a tool for rapidly assessing the implementation difficulty and emissions benefits of innovations

Consumer goods manufacturers aiming to reduce the environmental impact associated with their products commonly pursue incremental change strategies, but more radical approaches may be required if we are to address the challenges of sustainable consumption. One strategy to realize step change reductions is to prepare a portfolio of innovations providing different levels of impact reduction in exchange for different levels of organizational resource commitment. In this research a tool is developed to support this strategy, starting with the assumption that through brainstorming or other eco-innovation approaches, a long-list of candidate innovations has been created. The tool assesses the potential greenhouse gas benefit of an innovative option against the difficulty of its implementation. A simple greenhouse gas benefit assessment method based on streamlined LCA was used to analyze impact reduction potential, and a novel measure of implementation difficulty was developed. The predictions of implementation difficulty were compared against expert opinion, and showed similar results indicating the measure can be used sensibly to predict implementation difficulty. The assessment of the environmental gain versus implementation difficulty is visualized in a matrix, showing the trade-offs of several options. The tool is deliberately simple with scalar measures of CO 2 emissions benefits and implementation difficulty so tool users must remain aware of other potential environmental burdens besides greenhouse gases (e.g. water, waste). In addition, although relative life cycle emissions benefits of an option may be low, the absolute impact of an option can be high and there may be other co-benefits, which could justify higher levels of implementation difficulty. Different types of consumer products (e.g. household, personal care, foods) have been evaluated using the tool. Initial trials of the tool within Unilever demonstrate that the tool facilitates rapid evaluation of low-carbon innovations. © 2011 Elsevier Ltd. All rights reserved.

Strategies for designing and developing services for manufacturing firms

Product/service-systems (PSS) are in effect an approach to designing integrated products and services with a focus on both customer and product life cycle activities. A range of service-oriented design strategies can be found in current literature, from product-oriented DfX approaches to more customer-oriented approaches, such as integrated solutions. In this article, design strategies related to different types of services are mapped. Case studies from two industrial companies are used to confront the existing literature in order to improve the understanding of how manufacturing companies may align their product and service development activities with their business strategies. © 2010.

Influencing factors of successful transitions towards product-service systems: A simulation approach

Product-Service Systems (PSS) are new business strategies moving and extending the product value towards its functional usage and related required services. From a theoretical point of view the PSS concept is known since a decade and many Authors reported reasonable possible success factors: higher profits over the entire life-cycle, diminished environmental burden, and localization of required services. Nevertheless the PSS promises remain quantitatively unproven relaying on a simple theory that involves a few constructs with some empirical grounding, but that is limited by weak conceptualization, few propositions, and/or rough underlying theoretical logic. A plausible interpretation to analyze the possible evolution of a PSS strategy could be considering it as a new business proposition competing on a traditional Product-Oriented (PO) market, assumed at its own equilibrium state at a given time. The analysis of the dynamics associated to a possible transition from a traditional PO to a PSS strategy allows investigating the main parameters and variables influencing an eventual successful adoption. This research is worthwhile because organizations undergoing fundamental PSS strategy are concerned about change and inertia key processes which, despite equilibrium theory and because of negative feedback loops, could undermine, economically, the return of their PSS proposition. In this paper Authors propose a qualitative System Dynamics (SD) approach by considering the PSS as a perturbation of an existing PO market featured by a set of known parameters. The proposed model incorporates several PSS factors able to influence the success of a PSS proposition under a set of given and justified assumptions, attempting to place this business strategy in a dynamic framework.

Industrialization as a key element of sustainable product-service solutions

Product-service systems are seen by many authors to offer potential for significant sustainability benefit. Manufacturing companies are said to be essential to such a change through their influence over product performance and over the use and end-of-life stages. Yet linking these stages such that the producer is incentivized to improve the performance of later stages is still a challenge. This paper argues for placing the producer at the centre of a new arrangement: by seeking to utilize the producer's knowledge of designing and the knowledge of volume production, through creation of platforms, while cooperating closely with other actors. The paper describes three case studies that have used such an approach to design and implement new food production systems. Based on 12 months of action research observations, 10 participating organizations from the cases were studied, and the implemented solutions assessed for environmental, economic and social performance. The results demonstrate a high level of sustainability benefit is achievable using platforms and partners to design product-service systems, while highlighting that changes to production arrangements are necessary but not sufficient to improve whole life-cycle environmental performance of product-service systems, and that producers need to cooperate closely with other actors to achieve the claimed benefits.

A microfluidic device for high density hydrodynamic cell trapping, growth and super-resolution imaging

Super-Resolution imaging techniques such as Fluorescent Photo-Activation Localisation Microscopy (FPALM) have created a powerful new toolkit for investigating living cells, however a simple platform for growing, trapping, holding and controlling the cells is needed before the approach can become truly widespread. We present a microfluidic device formed in polydimethylsiloxane (PDMS) with a fluidic design which traps cells in a high-density array of wells and holds them very still throughout the life cycle, using hydrodynamic forces only. The device meets or exceeds all the necessary criteria for FPALM imaging of Schizosaccharomyces pombe and is designed to remain flexible, robust and easy to use. © 2011 IEEE.