A- and B-modes echobiometry in cataractous and noncataractous eyes of English Cocker Spaniel dogs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Experimental visceral leishmaniasis in high and low antibody - producer mice (selection IV-A)

A leishmaniose é uma infecção parasitária cuja imunidade protetora envolve a ativação de macrófagos. Neste trabalho avaliamos a susceptibilidade de camundongos H e L (bons e maus produtores de anticorpos, respectivamente) da seleção IV-A, à infecção com o protozoário L. donovani. Camundongos H infectados com 10(7) amastigotas por via intravenosa foram mais suscetíveis, apresentando maior carga parasitária tanto no fígado quanto no baço. Após 60 dias de infecção ambas as linhagens apresentaram um aumento no índice esplênico. Esta esplenomegalia foi conseqüência, pelo menos parcialmente, de um aumento no número de células esplênicas. Os resultados indicam que a seleção IV-A é susceptível à infecção com L. donovani e que dentro desta seleção a linhagem H apresenta maior suscetibilidade do que a linhagem L.

The failure analyses on ZnO varistors used in high tension devices

The main purpose of this work is to evaluate the failure caused by electrical discharge on commercial ZnO varistor doped with oxide of Bi, Sb, Si, Cr, Co utilized in electric transmission systems. In order to observe the effect of electrical discharge over the microstructure and electrical properties of the varistors, two kinds of pulses were applied: long pulse (2000 ms) and short pulse (8/20 mu s). In both cases, a decrease in grain size and increase in micropores and leakage current were observed. The degraded samples present oxygen defficiency mainly in the grain boundary and phase tranformation from the bismuth oxide phase. (c) 2005 Springer Science+ Business Media, Inc.

Modelling of the influence of the layer pollution thickness in high voltage polluted insulators

An experimental model and a mathematical model with the introduction of a ramp in the channel of Obenaus model are presented. The aim is to present a better reproduction of the real layer pollution deposited on the HV insulators. This better reproduction is obtained from two types of thickness variation: the introduction of a ramp (soft variation) and the introduction of a step (sudden variation). The computational simulations and the experimental data suggest that the introduction of the ramp is the better reproduction of the layer pollution. The ramp approximates to the real layer pollution more than the step.

Inelasticity distributions in high-energy p-nucleus collisions

Inelasticity distributions in high-energy p-nucleus collisions are computed in the framework of the interacting gluon model, with the impact-parameter fluctuation included. A proper account of the peripheral events by this fluctuation has shown to be vital for the overall agreement with several reported data. The energy dependence is found to be weak.

Temporal variation in C, N and P of the periphyton on the tropical aquatic macrophyte echinochloa polystachya (H.B.K.) hitch. In Jurumirim Reservoir (São Paulo, Brazil)

The temporal variations in C, N and P concentrations of the periphyton on the natural substratum (Echinochloa polystachya) and its relationships to the water's climatological (air temperature and precipitation), hydrodynamic (water discharge and water level), physical (temperature, transparency) and chemical variables (conductivity, total suspended solids, nitrate, nitrite, ammonia, silica, total phosphorus and orthophosphate) were evaluated in a lagoon at the Paranapanema River mouth into the Jurumirim Reservoir (São Paulo, Brazil) from August 1993 to July 1994. An amplitude variation of 2.0 m in water level was observed. Depending on to the hydrologic conditions, the lagoon presents intermediate conditions of lentic and lotic environments. The amplitude variations in C, N and P were 14.5-52.1% C DW-1, 0.5-3.2% N DW-1, and 0.03-0.4% P DW-1, respectively. The periphyton presented a decreased protein content. The environmental trophic degree appears to be decisive in chemical periphyton composition.

Water flow in high-speed handpieces

Objectives: This study measured the water flow commonly used in high-speed handpieces to evaluate the water flow's influence on temperature generation. Different flow speeds were evaluated between turbines that had different numbers of cooling apertures. Method and materials: Two water samples were collected from each high-speed handpiece at private practices and at the School of Dentistry at São José dos Campos. The first sample was collected at the customary flow and the second was collected with the terminal opened for maximum flow. The two samples were collected into weighed glass receptacles after 15 seconds of turbine operation. The glass receptacles were reweighed and the difference between weights was recorded to calculate the water flow in mL/min and for further statistical analysis. Results: The average water flow for 137 samples was 29.48 mL/min. The flow speeds obtained were 42.38 mL/min for turbines with one coolant aperture; 34.31 mL/min for turbines with two coolant apertures; and 30.44 mL/min for turbines with three coolant apertures. There were statistical differences between turbines with one and three coolant apertures (Tukey-Kramer multiple comparisons test with P < .05). Conclusion: Turbine handpieces with one cooling aperture distributed more water for the burs than high-speed handpieces with more than one aperture.

Detection of highways in high resolution images using Mathematical Morphology techniques

This paper seeks to apply a routine for highways detection through the mathematical morphology tools in high resolution image. The Mathematical Morphology theory consists of describing structures geometric presents quantitatively in the image (targets or features). This explains the use of the Mathematical Morphology in this work. As high resolution images will be used, the largest difficulty in the highways detection process is the presence of trees and automobiles in the borders tracks. Like this, for the obtaining of good results through the use of morphologic tools was necessary to choose the structuring element appropriately to be used in the functions. Through the appropriate choice of the morphologic operators and structuring elements it was possible to detect the highways tracks. The linear feature detection using mathematical morphology techniques, can contribute in cartographic applications, as cartographic products updating.

Search for neutral higgs bosons in Multi-b-Jet events in pp̄ collisions at s=1.96TeV

Data recorded by the D0 experiment at the Fermilab Tevatron Collider are analyzed to search for neutral Higgs bosons produced in association with b quarks. This production mode can be enhanced in the minimal supersymmetric standard model (MSSM). The search is performed in the three b quark channel using multijet triggered events corresponding to an integrated luminosity of 1fb-1. No statistically significant excess of events with respect to the predicted background is observed and limits are set in the MSSM parameter space. © 2008 The American Physical Society.

Microeconomic behavior in high uncertainty environments: the case of Argentina

Includes bibliography

The use of current transformers for noise detection due to sparking in insulators strings in high voltage transmission lines

In a general way, in an electric power utility the current transformers (CT) are used to measurement and protection of transmission lines (TL) 1 The Power Line Carriers systems (PLC) are used for communication between electrical substations and transmission line protection. However, with the increasing use of optical fiber to communication (due mainly to its high data transmission rate and low signal-noise relation) this application loses potentiality. Therefore, other functions must be defined to equipments that are still in using, one of them is detecting faults (short-circuits) and transmission lines insulator strings damages 2. The purpose of this paper is to verify the possibility of using the path to the ground offered by the CTs instead of capacitive couplings / capacitive potential transformers to detect damaged insulators, since the current transformers are always present in all transmission lines (TL's) bays. To this a comparison between this new proposal and the PLC previous proposed system 2 is shown, evaluating the economical and technical points of view. ©2010 IEEE.

Methodology for DSC calibration in high heating rates

Despite the large use of differential scanning calorimetry (DSC) technique in advanced polymer materials characterization, the new methodology called DSC in high heating rates was developed. The heating rate during conventional DSC experiments varying from 10 to 20°C.min-1, sample mass from 10 to 15mg and standard aluminum sample pan weighting, approximately, 27mg. In order to contribute to a better comprehension of DSC behavior in different heating rates, this work correlates as high heating rate influences to the thermal events in DSC experiments. Samples of metallic standard (In, Pb, Sn and Zn) with masses varying from 0.570mg to 20.9mg were analyzed in multiples sample heating rate from 4 to 324°C. min-1. In order to make properly all those experiments, a precise and careful temperature and enthalpy calibrations were performed and deeply discussed. Thus, this work shows a DSC methodology able to generate good and reliable results on experiments under any researcher choice heating rates to characterize the advanced materials used, for example, for aerospace industry. Also it helps the DSC users to find in their available instruments, already installed, a better and more accurate DSC test results, improving in just one shot the analysis sensitivity and resolution. Polypropylene melting and enthalpy thermal events are also studied using both the conventional DSC method and high heating rate method.