On the modulation of the effects of some 5 - HT - related agents in axiety models

The results of an investigation into how stressors interact with the action of serotonergic agents in animal models of anxiety are presented. Water deprivation and restraint both increased plasma corticosterone concentrations and elevated 5-HT turnover. In the elevated X-maze, water deprivation had a duration-dependent "anxiolytic" effect. The effect of restraint was dependent on the duration of restraint and was to inhibit maze exploration. Water-deprivation did not influence the action of diazepam or any 5-HT1A ligand in the X-maze. Restraint switched the "anxiogenic" effect of 8-0H-DPAT to either "anxiolytic" or inactive, depending on the time after the restraint when testing was performed. The Vogel conflict test detected an "anxiolytic" "anxiolytic"V"anxiolytic""anxiolytic" effect of buspirone which was additive with "anxiolytic" effects of pindolol and propranolol. Diazepam and fluoxetine were also active, but 8-0H-DPAT, ipsapirone, gepirone and yohimbine were inactive. In the elevated X-maze, "anxiogenic" responses to picrotoxin, flumazenil, RU 24969, CGS 12066B, fluoxetine and 8-0H-DPAT were detected. Other 5-HT1A ligands were inactive. Diazepam and corticosterone had "anxiolytic" effects. Increasing light intensity did not change behaviour on the elevated X-maze, but was able to reverse the effect of 8- OH-DPAT to an "anxiolytic" action. This effect was attributed to a presynaptic mechanism, because it was abolished by pCPA. The occurence of different behaviours in different reglons of the maze was shown to be susceptible to modulation by "anxiolytic" and "anxiogenic" drugs. These results are discussed in the context of there being at least two separate 5-HT mechanisms which are involved in the control of anxiety.

Elastic-plastic analysis of complete building structures

In this Thesis, details of a proposed method for the elastic-plastic failure load analysis of complete building structures are given. In order to handle the problem, a computer programme in Atlas Autocode is produced. The structures consist of a number of parallel shear walls and intermediate frames connected by floor slabs. The results of an experimental investigation are given to verify the theoretical results and to demonstrate various factors that may influence the behaviour of these structures. Large full scale practical structures are also analysed by the proposed method and suggestions are made for achieving design economy as well as for extending research in various aspects of this field. The existing programme for elastic-plastic analysis of large frames is modified to allow for the effect of composite action of structural members, i.e. reinforced concrete floor slabs and the supporting steel beams. This modified programme is used to analyse some framed type structures with composite action as well as those which incorporate plates and shear walls. The results obtained are studied to ascertain the influence of composite action and other factors on the load carrying capacity of both bare frames and complete building structures. The theoretical failure load presented in this thesis does not predict the overall failure load of the structure nor does it predict the partial failure load of the shear walls and slabs but it merely predicts the partial failure load of a single frame and assumes that the loss of stiffess of such a frame renders the overall structure unusable. For most structures the analysis proposed in this thesis is likely to break down prematurely due to the failure of the slab and shear wall system and this factor must be taken into account in any future work on such structures. The experimental work reported in this thesis is acknowledged to be unsatisfactory as a verification of the limited theory proposed. In particular perspex was not found to be a suitable material for testing at high loads, micro-concrete may be more suitable.

Human resource development for inclusive procurement by intermediation:a situated learning theory application

This paper fills an important gap in the human resource development (HRD) literature by considering the role that NGO intermediation initiatives can play in bringing together and developing corporate procurement officials (CPOs) and ethnic minority business owner-managers (EMBOs) supplying goods and services. It has been suggested that such initiatives hold great promise in helping ethnic minority businesses escape from their disadvantageous sectoral concentration in the UK. Using situated learning theory as an application lens, the main aim of this paper is to demonstrate how nurturing communities of practice of CPOs and EMBOs and facilitating their interaction can help their professional development and their approaches to procuring and supplying, respectively. The paper reports on the authors' experience with an action research programme encompassing two intermediation initiatives of this kind. The lessons drawn from this study are useful for all those concerned with HRD for inclusive procurement; intermediaries promoting inclusive procurement, large procurers who are willing to engage with supplier diversity and ethnic minority suppliers who wish to access corporate procurement systems and 'break-out'. © 2013 Taylor & Francis.

The move to servitization (from a product service system point of view)

Product Service Systems (PSSs) emphasize the substitution of products with services. The term “Servitisation” was introduced by Sandra Vendermerwe in the 80s to represent the addition of services to increase a company’s competitive edge. Key to PSS, and Servitisation more generally, is the “informated product”. The informated product enables health monitoring of the product in use and can be key to a workable PSS. This paper reviews the evolution of servitisation and the associated business benefit. It also then reviews the concept of informated product reconfiguration techniques and remote services that enables PSS to be delivered.

Caking behaviour of spray-dried milk powders:using scanning probe microscopy to study nanoscale surface properties and material composition

Spray drying is widely used to manufacture many powdered products, with the drying process parameters having significant influence over the final powder's surface properties and propensity for unwanted caking. In most cases caking experiments are performed on bulk powders, but especially in multi-component powders, it is often difficult to interpret these results, where interaction effects between particles can be complex. Here the technique of scanning probe microscopy is used to characterize the nanoscale properties of spray dried model milk powders in order to investigate the surface properties of the powders.

Institutional work at field-configuring events:shaping industry change within sustainable transitions

Adopting an institutional approach from organization studies, this paper explores the role of key actors on “purposeful governance for sustainability” (Smith, Voss et al. 2010: 444) through the case of smart metering in the UK. Institutions are enduring patterns in social life, reflected in identities, routines, rules, shared meanings and social relations, which enable, and constrain, the beliefs and behaviours of individual and collective actors within a field (Thornton and Ocasio 2008). Large-scale external initiatives designed to drive regime-level change prompt ‘institutional entrepreneurs’ to perform ‘institutional work’ – “purposive action aimed at creating, maintaining and disrupting institutions” (Lawrence and Suddaby, 2006). Organization scholars are giving increasing attention to ‘field-configuring events’ (FCEs) which provide social spaces for diverse organizational actors to come together to collectively shape socio-technical pathways (Lampel and Meyer 2008). Our starting point for this exploratory study is that FCEs can offer important insights to the dynamics, politics and governance of sustainability transitions. Methodologically, FCEs allow us to observe and “link field evolution at the macro-level with individual action at the micro-level” (Lampel and Meyer, 2008: 1025). We examine the work of actors during a series of smart metering industry forums over a three-year period (industry presentations [n= 77] and panel discussions [n= 16]). The findings reveal new insights about how institutional change unfolds, alongside technological transitions, in ways that are partial and aligned with the interests of powerful incumbents whose voices are frequently heard at FCEs. The paper offers three contributions. First, the study responds to calls for more research examining FCEs and the role they play in transforming institutional fields. Second, the emergent findings extend research on institutional work by advancing our understanding of a specific site of institutional work, namely a face-to-face inter-organizational arena. Finally, in line with the research agenda for innovation studies and sustainability transitions elaborated by Smith et al (2010), the paper illustrates how actors in a social system respond to, translate, and enact interventions designed to promote industrial transformation, ultimately shaping the sustainability transition pathway.

Intermediate pyrolysis and product identification by TGA and Py-GC/MS of green microalgae and their extracted protein and lipid components

The thermo-chemical conversion of green microalgae Chlamydomonas reinhardtii wild type (CCAP 11/32C), its cell wall deficient mutant C. reinhardtii CW15 (CCAP 11/32CW15) and Chlorella vulgaris (CCAP 211/11B) as well as their proteins and lipids was studied under conditions of intermediate pyrolysis. The microalgae were characterised for ultimate and gross chemical composition, lipid composition and extracted products were analysed by Thermogravimetric analysis (TG/DTG) and Pyrolysis-gaschromatography/mass-spectrometry (Py-GC/MS). Proteins accounted for almost 50% and lipids 16-22 % of dry weight of cells with little difference in the lipid compositions between the C. reinhardtii wild type and the cell wall mutant. During TGA analysis, each biomass exhibited three stages of decomposition, namely dehydration, devolatilization and decomposition of carbonaceous solids. Py-GC/MS analysis revealed significant protein derived compounds from all algae including toluene, phenol, 4-methylphenol, 1H-indole, 1H-indole-3methyl. Lipid pyrolysis products derived from C. reinhardtii wild type and C. reinhardtii CW15 were almost identical and reflected the close similarity of the fatty acid profiles of both strains. Major products identified were phytol and phytol derivatives formed from the terpenoid chain of chlorophyll, benzoic acid alkyl ester derivative, benzenedicarboxylic acid alkyl ester derivative and squalene. In addition, octadecanoic acid octyl ester, hexadecanoic acid methyl ester and hydrocarbons including heptadecane, 1-nonadecene and heneicosane were detected from C. vulgaris pyrolysed lipids. These results contrast sharply with the types of pyrolytic products obtained from terrestrial lignocellulosic feedstocks and reveal that intermediate pyrolysis of algal biomass generates a range of useful products with wide ranging applications including bio fuels.

Rosemary : a raw material for a new genre of bio-based antioxidants for sustainable applications

The potential replacement, partially or fully, of synthetic additives by bio-based alternatives derived from indigenous renewable non-food crop resources offers a market opportunity for a green supply of raw materials for different industrial and health products, with greater involvement of the farming community in crop production while addressing the ever more stringent environmental and pollution laws that now require the use of less potentially toxic/harmful ingredients, even if they are present in relatively small quantities. The work presented here relates to developing a new genre of environmentally-sustainable bio-based antioxidants (AO) for industrial uses that are obtained from extracts of UK-grown rosemary (Rosmarinus officinalis) plant. The performance of these AOs was tested, and their efficacy compared with some common and benchmark synthetic AOs from the same chemical class, in different products including polymers especially for packaging, as well as lubricants, cosmetics and health products. One of the main active ingredients in rosemary is Rosmarinic acid which is a water-soluble compound. This was chemically transformed into a number of ester derivatives, Rosmarinates, targeted for different applications. The parent and the modified antioxidants (the rosmarinates) were characterised and their antioxidancy were examined and tested in linear low-density polyethylene (LLDPE) and in polypropylene (PP) and compared with compounds of similar structure and with other well known synthetic antioxidants used commercially in polyolefins. The results show that antioxidants sourced from rosemary have the added benefit of being highly efficient and intrinsically more active than many synthetic and bio-based alternatives.

Cancer cachexia

Causative factors: Nutritional supplementation or pharmacological manipulation of appetite are unable to control the muscle atrophy seen in cancer cachexia. This suggests that tumour and/or host factors might be responsible for the depression in protein synthesis and the increase in protein degradation. An increased expression of the ubiquitin-proteasome proteolytic pathway is responsible for the increased degradation of myofibrillar proteins in skeletal muscle, and this may be due to tumour factors, such as proteolysis-inducing factor (PIF), or host factors such as tumour necrosis factor-α (TNF-α). In humans loss of adipose tissue is due to an increase in lipolysis rather than a decrease in synthesis, and this may be due to tumour factors such as lipid-mobilising factor (LMF) or TNF-α, both of which can increase cyclic AMP in adipocytes, leading to activation of hormone-sensitive lipase (HSL). Levels of mRNA for HSL are elevated twofold in adipose tissue of cancer patients, while there are no changes in lipoprotein lipase (LPL), involved in extraction of fatty acids from plasma lipoproteins for storage. Treatment for cachexia: This has concentrated on increasing food intake, although that alone is unable to reverse the metabolic changes. Agents interfering with TNF-α have not been very successful to date, although more research is required in that area. The only agent tested clinically that is able to interfere with the action of PIF is eicosapentaenoic acid (EPA). EPA attenuates protein degradation in skeletal muscle by preventing the increased expression of the ubiquitin-proteasome pathway, but has no effect on protein synthesis. When used alone EPA prevents further wasting in cachectic patients, and, when it is combined with an energy- and protein-dense nutritional supplement, weight gain is seen, which is totally lean body mass. These results suggest that mechanistic studies into the causes of cancer cachexia will allow appropriate therapeutic intervention.

Servitization capabilities for advanced services:a multi-actor perspective

Servitization is the process by which manufacturers add services to their product offerings and even replace products with services. The capabilities necessary to develop and deliver advanced services as part of servitization are often discussed in the literature from the manufacturer’s perspective, e.g., having a service-focused culture or the ability to sell solutions. Recent research has acknowledged the important role of customers and, to a lesser extent, other actors (e.g., intermediaries) in bringing about successful servitization, particularly for use-oriented and results-oriented advanced services. The objective of this study is to identify the capabilities required to successful develop advanced services as part of servitization by considering the perspective of manufacturers, intermediaries and customers. This study involved interviews with 33 managers in 28 large UK-based companies from these three groups, about servitization capabilities. The findings suggest that there are eight broad capabilities that are important for advanced services; 1) personnel with expertise and deep technical product knowledge, 2) methodologies for improving operational processes, helping to manage risk and reduce costs, 3) the evolution from being a product- focused manufacturer to embracing a services culture, 4) developing trusting relationships with other actors in the network to support the delivery of advanced services, 5) new innovation activities focused on financing contracts (e.g., ‘gain share’) and technology implementation (e.g., Web-based applications), 6) customer intimacy through understanding their business challenges in order to develop suitable solutions, 7) extensive infrastructure (e.g., personnel, service centres) to deliver a local service, and 8) the ability to tailor service offerings to each customer’s requirements and deliver these responsively to changing needs. The capabilities required to develop and deliver advanced services align to a need to enhance the operational performance of supplied products throughout their lifecycles and as such require greater investment than the capabilities for base and intermediate services.

Heterogeneous catalysts for clean technology:spectroscopy, design, and monitoring

Reactive, but not a reactant. Heterogeneous catalysts play an unseen role in many of today's processes and products. With the increasing emphasis on sustainability in both products and processes, this handbook is the first to combine the hot topics of heterogeneous catalysis and clean technology. It focuses on the development of heterogeneous catalysts for use in clean chemical synthesis, dealing with how modern spectroscopic techniques can aid the design of catalysts for use in liquid phase reactions, their application in industrially important chemistries - including selective oxidation, hydrogenation, solid acid- and base-catalyzed processes - as well as the role of process intensification and use of renewable resources in improving the sustainability of chemical processes. With its emphasis on applications, this book is of high interest to those working in the industry.

Comparison of the measurement performance of high precision multi-axis metal cutting machine tools

High precision manufacturers continuously seek out disruptive technologies to improve the quality, cost, and delivery of their products. With the advancement of machine tool and measurement technology many companies are ready to capitalise on the opportunity of on-machine measurement (OMM). Coupled with business case, manufacturing engineers are now questioning whether OMM can soon eliminate the need for post-process inspection systems. Metrologists will however argue that the machining environment is too hostile and that there are numerous process variables which need consideration before traceable measurement on-the-machine can be achieved. In this paper we test the measurement capability of five new multi-axis machine tools enabled as OMM systems via on-machine probing. All systems are tested under various operating conditions in order to better understand the effects of potentially significant variables. This investigation has found that key process variables such as machine tool warm-up and tool-change cycles can have an effect on machine tool measurement repeatability. New data presented here is important to many manufacturers whom are considering utilising their high precision multi-axis machine tools for both the creation and verification of their products.

Vertical intra-industry trade and the EU accession: The case of Hungarian agri-food sector

The aim of this paper is to examine the relationship between the factor endowment and the pattern of intra-industry trade. Our empirical analysis relates to Hungary’s intra-industry trade in agri-food products with 26 member states of the EU over the period 1999-2010. Estimations reject the comparative advantage explanation of vertical intra-industry trade and provide partial support the prediction of Flam and Helpman model. Findings highlight that nature of factor endowments play also important role in explanation of vertical intra-industry trade. Other variables like market size and distance confirm the theoretical expectations. In addition, trade with new member states positively, whilst the EU accession ambigouosly influence the share of vertical IIT.

The European Patterns of "Homo Academicus“ and The Chances of Its Evolution In Current Hungarian Higher Education

In the recent four or five years, there have been abrupt and radical changes in the governance of Hungarian higher education. It can then be interesting to assess the state of “homo academicus“ as it looks currently in Hungary. The notion of “homo academicus“ is obvious: it concerns participants in the system of a country’s higher education. The paper as follows still comes back to the definition of “homo academicus“ by referring first to it as occupation, or rather as a profession that can be interpreted in terms of sociology. Secondly, some historic patterns can also be mobilised, based on the assumption that university is a very European institutions that is even rooted in the tradition of the Middle Ages. The elbow-room of seeking for identity and the role to be filled by academics are limited by the effective system of the governance of higher education. It is a key to the chances of academics of meeting the historically corroborated professional standards that they exercise academic freedom. As it cannot be done individually, but in cooperation (through a collegial system), academic freedom is always combined with collective action. The field where this freedom can be exercised can be specified through university autonomy, the lack of which makes a serious barrier to the full development of a character of “homo academicus“. This is now the case in Hungary, the paper suggests. The paper seeks to gain deeper understanding of the character of academics, their vocation and professional roles, and the governance of higher education, serving as the environment for academic activity, by creating a conceptual framework. The paper is established on the results of sociological research and the experience of legal management, although it remains to be of theoretical nature. It criticises the current Hungarian situation of the governance of higher education, arguing for the reconstruction of university autonomy and financial stability. It also emphasises the importance of predictable regulations.

Tíz év az Európai Unióban - az új tagországok agrárteljesítményei = A decade in the EU: the agricultural performances of the new member-states

Több mint tíz év telt el az Európai Unió 2004. évi kibővülése óta. A tízéves évforduló jó lehetőséget kínált a mérlegkészítésre, annak vizsgálatára, hogy a legfrissebb elérhető adatok tükrében milyen fejlődési pályát tudhatnak maguk mögött az új tagországok mezőgazdasági szektorai. Írásunk célja a tíz kelet- európai EU-tagállam agrárteljesítményének értékelése, illetve ez alapján a csatlakozás nyerteseinek, illetve veszteseinek azonosítása. A rendelkezésre álló adatokat a többdimenziós faktoranalízis módszerével feldolgozva arra az eredményre jutottunk, hogy Lengyelország, Észtország és Litvánia hármasa tekinthető az agrárcsatlakozás abszolút nyertesének, míg a többi új tagállam nem volt képes teljes mértékben kihasználni a csatlakozás adta lehetőségeket. Az eredményekből az is látható, hogy a magas hozzáadott értékű termékekre való szakosodás jó stratégiának bizonyult, mert gyorsabb fejlődést biztosított, mint a mezőgazdasági alaptermékekre való koncentrálás. ____ The period of over ten years since the 2004 round of EU accessions provides a good opportunity to assess and take stock of agricultural developments in the new member- States, in light of the latest available data. The paper sets out to assess their agricultural performances and to identify the winners and losers by accession in this regard. Ranking individual country performances using Parallel Factor Analysis (PARAFAC) suggests that Poland, Estonia and Lithuania can be considered as winners, whereas the other countries failed to use the potentials of membership to the full. The results also suggest that focusing on agri-food products with a high added value proved a good development strategy for the sector. Countries that concentrated on producing agri-food raw materials lagged behind.