Rapid synthesis of Mn3O4 powder from pyro-synthesis of ethylene glycol-metal nitrate precursor assisted by nitric acid

The rapid synthesis of Mn3O4 powders by a two-step process of pyro-synthesis of ethylene glycol-metal nitrate precursor assisted by nitric acid is reported. A new strategy that accelerates the synthesis and allows obtaining highly pure crystalline Mn3O4 is discussed. The structural and morphological characteristics of the Mn3O4 powders are presented and discussed. The mechanism of formation of the Mn3O4 is also discussed. In comparison with other synthesis methods, the present method shows that the proposed route of synthesis has the main advantage of high production of the powder material in a very short time.

Perception of brazilian citizens about Darwinism and the (Non) Influence of God in the evolutionary process

The current context is unique in relation to the teaching of evolution in Brazil and the population's perception of evolution. On the one hand, it is said often about Darwinism in various media, especially due to the relatively recent commemoration of the two hundred years of the birth of Charles Darwin and one hundred and fifty years of the launch of the book The Origin of Species. On the other hand, it is clear, in recent years, a timid movement, more worryingly, in favor of equitable approach of creationist and evolutionist theories in the classroom. This article is a part of a research whose goal is to raise the design that Brazilian respondents have about the Darwinian view (which disregards the divine influence in the evolution of the species). The instrument used for data collection is a questionnaire, type Likert scale, which consists of a series of statements in which respondents must express their degree of agreement or disagreement with each statement. In this study, we present the results of the statement. "The thought of Darwin, which does not consider God as a participant in the process of evolution, is...". Analysis correlated with data on religion and education of the respondents are also held. The results point to a tendency of respondents not to accept the Darwinian view that disregards God's interference in the evolutionary process. The data also show that respondents' choices are influenced by religion and education. The frequency of responses that tend to accept the Darwinian view (which disregards the divine participation in the evolution of the species) is higher among respondents with higher levels of education. Adherents to religions "evangelical" tend to deny this view more often than followers of other religions. Given the potential risks of inserting creationist approaches in school education, it is necessary a discussion of the possible impacts of this rejection of Darwin's thinking (which does not consider God as a participant in the evolutionary process), indicated here, in the teaching of evolution. This work was supported by FAPEMIG.

A label-free impedimetric immunosensor for direct determination of the textile dye Disperse Orange 1

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biossorção & biodegradação de azo corante: desenvolvimento de processos utilizando resíduos como fonte de microorganismos = Azo dye biosorption & biodegradation : process development with residues as source of microorganisms

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Bio-hydrogen production based on catalytic reforming of volatiles generated by cellulose pyrolysis: an integrated process for ZnO reduction and zinc nanostructures fabrication

The paper presents a process of cellulose thermal degradation with bio-hydrogen generation and zinc nanostructures synthesis. Production of zinc nanowires and zinc nanoflowers was performed by a novel processes based on cellulose pyrolysis, volatiles reforming and direct reduction of ZnO. The bio-hydrogen generated in situ promoted the ZnO reduction with Zn nanostructures formation by vapor–solid (VS) route. The cellulose and cellulose/ZnO samples were characterized by thermal analyses (TG/DTG/DTA) and the gases evolved were analyzed by FTIR spectroscopy (TG/FTIR). The hydrogen was detected by TPR (Temperature Programmed Reaction) tests. The results showed that in the presence of ZnO the cellulose thermal degradation produced larger amounts of H2 when compared to pure cellulose. The process was also carried out in a tubular furnace with N2 atmosphere, at temperatures up to 900 °C, and different heating rates. The nanostructures growth was catalyst-free, without pressure reduction, at temperatures lower than those required in the carbothermal reduction of ZnO with fossil carbon. The nanostructures were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and transmission electron microscopy (TEM). The optical properties were investigated by photoluminescence (PL). One mechanism was presented in an attempt to explain the synthesis of zinc nanostructures that are crystalline, were obtained without significant re-oxidation and whose morphologies are dependent on the heating rates of the process. This route presents a potential use as an industrial process taking into account the simple operational conditions, the low costs of cellulose and the importance of bio-hydrogen and nanostructured zinc.

The Benefits of Sugarcane Chain Development in Africa

As consumers continue to be concerned about the future of sustainable agriculture and the scarcity of natural resources, biofuels can be an important component of the "people" solution through job creation, development and interiorizing economic activities of a country through moving money from cities into rural areas. The Brazilian sugarcane industry is well developed in terms of corporate social responsibility and can serve as an example for other countries such as Africa. The objective of this article is to show how sugar cane can contribute to the development of Africa by producing renewable fuel for use in booming African cities. A supply of sugar can be developed for use in local markets and exports. Other opportunities exist to produce bioelectricity from the process of burning the bagasse and other new products such as plastic and diesel. In the case of Ethanol, this fuel has proven to be the most efficient in competing with gasoline in the last 40 years, and Africa may gain with a strategic plan on ethanol.

A property rights approach to strategy

This article is about how resources can be conceptualized as bundles of attributes for which one can assign economic property rights. Strategic considerations are deliberately incorporated into the analysis through the assessment of the activities of capture and protection of property rights, along with the examination of the institutional environment. These basic elements combine in order to design an approach to strategy. In developing this approach, the authors identify four key questions for structuring the strategy formulation process of the firm. The analytical framework is illustrated through a particular case: the collection of royalties on the genetically modified (GM) technology in soybean seeds.

Thermal decomposition kinetics of Brazilian limestones: effect of CO2 partial pressure

The influence of the partial pressure of carbon dioxide (CO2) on the thermal decomposition process of a calcite (CI) and a dolomite (DP) is investigated in this paper using a thermogravimetric analyser. The tests were non-isothermal at five different heating rates in dynamic atmosphere of air with 0% and 15% carbon dioxide (CO2). In the atmosphere without CO2, the average activation energies (E-alpha) were 197.4 kJ mol(-1) and 188.1 kJ mol(-1) for CI and DP, respectively. For the DP with 15% CO2, two decomposition steps were observed, indicating a change of mechanism. The values of E-alpha for 15% CO2 were 378.7 kJ mol(-1) for the CI, and 299.8 kJ mol(-1) (first decomposition) and 453.4 kJ mol(-1) (second decomposition) for the DP, showing that the determination of E-alpha for DP should in this case be considered separately in those two distinct regions. The results obtained in this study are relevant to understanding the behaviour changes in the thermal decomposition of limestones with CO2 partial pressure when applied to technologies, such as carbon capture and storage (CCS), in which carbon dioxide is present in high concentrations.

Impact of the Level of Disclosure of Financial Information on the Pricing of Shares in the Context of Adverse Selection: an experimental research

Managers know more about the performance of the organization than investors, which makes the disclosure of information a possible strategy for competitive differentiation, minimizing adverse selection. This paper's main goal is to analyze whether or not an entity's level of diclosure may affect the risk perception of individuals and the process of evaluating their shares. The survey was carried out in an experimental study with 456 subjects. In a stock market simulation, we investigated the pricing of the stocks of two companies with different levels of information disclosure at four separate stages. The results showed that, when other variables are constant, the level of disclosure of an entity can affect the expectations of individuals and the process of evaluating their shares. A higher level of disclosure by an entity affected the value of its share and the other company's.

Xylanase and beta-Xylosidase Production by Aspergillus ochraceus: New Perspectives for the Application of Wheat Straw Autohydrolysis Liquor

The xylanase biosynthesis is induced by its substrate-xylan. The high xylan content in some wastes such as wheat residues (wheat bran and wheat straw) makes them accessible and cheap sources of inducers to be mainly applied in great volumes of fermentation, such as those of industrial bioreactors. Thus, in this work, the main proposal was incorporated in the nutrient medium wheat straw particles decomposed to soluble compounds (liquor) through treatment of lignocellulosic materials in autohydrolysis process, as a strategy to increase and undervalue xylanase production by Aspergillus ochraceus. The wheat straw autohydrolysis liquor produced in several conditions was used as a sole carbon source or with wheat bran. The best conditions for xylanase and beta-xylosidase production were observed when A. ochraceus was cultivated with 1% wheat bran added of 10% wheat straw liquor (produced after 15 min of hydrothermal treatment) as carbon source. This substrate was more favorable when compared with xylan, wheat bran, and wheat straw autohydrolysis liquor used separately. The application of this substrate mixture in a stirred tank bioreactor indicated the possibility of scaling up the process to commercial production.

Investigation of the pore blockage of a Brazilian dolomite during the sulfation reaction

The influence of the temperature and reaction time on the sulfation process of a dolomite is investigated in this paper. The sulfation effectiveness was evaluated and correlated with changes in the physical characteristics of a Brazilian dolomite during the reactive process. Calcination and sulfation experiments were performed under isothermal conditions for dolomite samples with average particle sizes of 545 mu m at temperatures of 750 degrees C, 850 degrees C and 950 degrees C at different times of sulfation. Thermogravimetric tests were applied to establish the reactivity variation of the dolomite in function of the time in the sulfation reaction and evaluate the methodology of the samples preparation. Porosimetry tests were performed to study the pore blockage of dolomite during the sulfation reaction. The highest values of BET surface area were 25.55 m(2)/g, 29.55 m(2)/g and 12.62 m(2)/g for calcined samples and after their sulfation processes, conversions of 51.5%, 61.9% and 42.8% were obtained at 750 degrees C, 850 degrees C and 950 degrees C, respectively. Considering the process as a whole, the best fit was provided by a first-order exponential decay equation. Moreover, the results have shown that it is possible to quantify the decreasing in the dolomite reactivity for sulfur dioxide sorption and understand the changes in the behavior of the sulfation process of limestones when applied to technologies, as fluidized bed combustor, in which sulfur dioxide is present. (C) 2011 Elsevier B. V. All rights reserved.

Development of quantitative methods for sustainability assessment in process industry

The increasing aversion to technological risks of the society requires the development of inherently safer and environmentally friendlier processes, besides assuring the economic competitiveness of the industrial activities. The different forms of impact (e.g. environmental, economic and societal) are frequently characterized by conflicting reduction strategies and must be holistically taken into account in order to identify the optimal solutions in process design. Though the literature reports an extensive discussion of strategies and specific principles, quantitative assessment tools are required to identify the marginal improvements in alternative design options, to allow the trade-off among contradictory aspects and to prevent the “risk shift”. In the present work a set of integrated quantitative tools for design assessment (i.e. design support system) was developed. The tools were specifically dedicated to the implementation of sustainability and inherent safety in process and plant design activities, with respect to chemical and industrial processes in which substances dangerous for humans and environment are used or stored. The tools were mainly devoted to the application in the stages of “conceptual” and “basic design”, when the project is still open to changes (due to the large number of degrees of freedom) which may comprise of strategies to improve sustainability and inherent safety. The set of developed tools includes different phases of the design activities, all through the lifecycle of a project (inventories, process flow diagrams, preliminary plant lay-out plans). The development of such tools gives a substantial contribution to fill the present gap in the availability of sound supports for implementing safety and sustainability in early phases of process design. The proposed decision support system was based on the development of a set of leading key performance indicators (KPIs), which ensure the assessment of economic, societal and environmental impacts of a process (i.e. sustainability profile). The KPIs were based on impact models (also complex), but are easy and swift in the practical application. Their full evaluation is possible also starting from the limited data available during early process design. Innovative reference criteria were developed to compare and aggregate the KPIs on the basis of the actual sitespecific impact burden and the sustainability policy. Particular attention was devoted to the development of reliable criteria and tools for the assessment of inherent safety in different stages of the project lifecycle. The assessment follows an innovative approach in the analysis of inherent safety, based on both the calculation of the expected consequences of potential accidents and the evaluation of the hazards related to equipment. The methodology overrides several problems present in the previous methods proposed for quantitative inherent safety assessment (use of arbitrary indexes, subjective judgement, build-in assumptions, etc.). A specific procedure was defined for the assessment of the hazards related to the formations of undesired substances in chemical systems undergoing “out of control” conditions. In the assessment of layout plans, “ad hoc” tools were developed to account for the hazard of domino escalations and the safety economics. The effectiveness and value of the tools were demonstrated by the application to a large number of case studies concerning different kinds of design activities (choice of materials, design of the process, of the plant, of the layout) and different types of processes/plants (chemical industry, storage facilities, waste disposal). An experimental survey (analysis of the thermal stability of isomers of nitrobenzaldehyde) provided the input data necessary to demonstrate the method for inherent safety assessment of materials.

Technology acquisition through licensing. Implications for firm strategy

Nowadays licensing practices have increased in importance and relevance driving the widespread diffusion of markets for technologies. Firms are shifting from a tactical to a strategic attitude towards licensing, addressing both business and corporate level objectives. The Open Innovation Paradigm has been embraced. Firms rely more and more on collaboration and external sourcing of knowledge. This new model of innovation requires firms to leverage on external technologies to unlock the potential of firms’ internal innovative efforts. In this context, firms’ competitive advantage depends both on their ability to recognize available opportunities inside and outside their boundaries and on their readiness to exploit them in order to fuel their innovation process dynamically. Licensing is one of the ways available to firm to ripe the advantages associated to an open attitude in technology strategy. From the licensee’s point view this implies challenging the so-called not-invented-here syndrome, affecting the more traditional firms that emphasize the myth of internal research and development supremacy. This also entails understanding the so-called cognitive constraints affecting the perfect functioning of markets for technologies that are associated to the costs for the assimilation, integration and exploitation of external knowledge by recipient firms. My thesis aimed at shedding light on new interesting issues associated to in-licensing activities that have been neglected by the literature on licensing and markets for technologies. The reason for this gap is associated to the “perspective bias” affecting the works within this stream of research. With very few notable exceptions, they have been generally concerned with the investigation of the so-called licensing dilemma of the licensor – whether to license out or to internally exploit the in-house developed technologies, while neglecting the licensee’s perspective. In my opinion, this has left rooms for improving the understanding of the determinants and conditions affecting licensing-in practices. From the licensee’s viewpoint, the licensing strategy deals with the search, integration, assimilation, exploitation of external technologies. As such it lies at the very hearth of firm’s technology strategy. Improving our understanding of this strategy is thus required to assess the full implications of in-licensing decisions as they shape firms’ innovation patterns and technological capabilities evolution. It also allow for understanding the so-called cognitive constraints associated to the not-invented-here syndrome. In recognition of that, the aim of my work is to contribute to the theoretical and empirical literature explaining the determinants of the licensee’s behavior, by providing a comprehensive theoretical framework as well as ad-hoc conceptual tools to understand and overcome frictions and to ease the achievement of satisfactory technology transfer agreements in the marketplace. Aiming at this, I investigate licensing-in in three different fashions developed in three research papers. In the first work, I investigate the links between licensing and the patterns of firms’ technological search diversification according to the framework of references of the Search literature, Resource-based Theory and the theory of general purpose technologies. In the second paper - that continues where the first one left off – I analyze the new concept of learning-bylicensing, in terms of development of new knowledge inside the licensee firms (e.g. new patents) some years after the acquisition of the license, according to the Dynamic Capabilities perspective. Finally, in the third study, Ideal with the determinants of the remuneration structure of patent licenses (form and amount), and in particular on the role of the upfront fee from the licensee’s perspective. Aiming at this, I combine the insights of two theoretical approaches: agency and real options theory.

The informal market of education in Egypt: Private tutoring and its implications /// Arbeitspapiere / Institut für Ethnologie und Afrikastudien ; 88

Education is generally perceived as a public good which should be provided by the state. In Egypt, free and equal access to education has been guaranteed to all citizens since President Nasser’s socialist reforms in the 1950s. However, due to high population growth rates and a lack of financial resources, the public education system has been struggling to accommodate rapidly increasing numbers of students. While enrolment rates have risen steadily, the quality of state-provided services has deteriorated. Teachers and students have to cope with high class densities, insufficient facilities, a rigid syllabus and a centralized examination system. Today, teaching is among the lowest-paying occupations in the public sector. One strategy to cope with this situation is the widespread practice of private tutoring, which usually takes place at students’ homes or in commercial tutoring centers. Based on research carried out in Cairo in 2004/05 and 2006, I use an actor-centered approach to analyze the motivations of Egyptian teachers and students for participating in private tutoring and the impact that this practice has on the relationship between teachers and students. Students of all socio-economic backgrounds resort to tutoring in order to succeed in a highly competitive and exam-oriented education system. However, the form and quality of tutoring that can be accessed depends on the financial means of the family. For teachers, tutoring provides a good opportunity not only to supplement their income, but also, in the case of renowned “star teachers”, to improve their professional status and autonomy. On the informal “market of education” that has developed in Egypt during the last decades, the educational responsibilities of the state are increasingly being taken over by private actors, i.e. the process of teaching and learning is dissociated from the direct control of the state and from school as an institution. At the same time, education is turned into a marketable commodity. Despite the government’s efforts to provide free education to all citizens, the quality of social services that can be accessed in Egypt, thus, depends mainly on the financial means of the individual or the family.

Tissue engineering strategies for biomaterial-based anticancer drug delivery and enhancement of angiogenesis in tumor-resected bone

Patienten, die an Osteosarkom leiden werden derzeit mit intravenös applizierten krebstherapeutischen Mitteln nach Tumorresektion behandelt, was oftmals mit schweren Nebenwirkungen und einem verzögerten Knochenheilungsprozess einhergeht. Darüber hinaus treten vermehrt Rezidive aufgrund von verbleibenden neoplastischen Zellen an der Tumorresektionsstelle auf. Erfolgreiche Knochenregeneration und die Kontrolle von den im Gewebe verbleibenden Krebszellen stellt eine Herausforderung für das Tissue Engineering nach Knochenverlust durch Tumorentfernung dar. In dieser Hinsicht scheint der Einsatz von Hydroxyapatit als Knochenersatzmaterial in Kombination mit Cyclodextrin als Medikamententräger, vielversprechend. Chemotherapeutika können an Biomaterial gebunden und direkt am Tumorbett über einen längeren Zeitraum freigesetzt werden, um verbliebene neoplastische Zellen zu eliminieren. Lokal applizierte Chemotherapie hat diverse Vorteile, einschließlich der direkten zytotoxischen Auswirkung auf lokale Zellen, sowie die Reduzierung schwerer Nebenwirkungen. Diese Studie wurde durchgeführt, um die Funktionsfähigkeit eines solchen Arzneimittelabgabesystems zu bewerten und um Strategien im Bereich des Tissue Engineerings zu entwickeln, die den Knochenheilungsprozess und im speziellen die Vaskularisierung fördern sollen. Die Ergebnisse zeigen, dass nicht nur Krebszellen von der chemotherapeutischen Behandlung betroffen sind. Primäre Endothelzellen wie zum Beispiel HUVEC zeigten eine hohe Sensibilität Cisplatin und Doxorubicin gegenüber. Beide Medikamente lösten in HUVEC ein tumor-unterdrückendes Signal durch die Hochregulation von p53 und p21 aus. Zudem scheint Hypoxie einen krebstherapeutischen Einfluss zu haben, da die Behandlung sensitiver HUVEC mit Hypoxie die Zellen vor Zytotoxizität schützte. Der chemo-protektive Effekt schien deutlich weniger auf Krebszelllinien zu wirken. Diese Resultate könnten eine mögliche chemotherapeutische Strategie darstellen, um den Effekt eines zielgerichteten Medikamenteneinsatzes auf Krebszellen zu verbessern unter gleichzeitiger Schonung gesunder Zellen. Eine erfolgreiche Integration eines Systems, das Arzneimittel abgibt, kombiniert mit einem Biomaterial zur Stabilisierung und Regeneration, könnte gesunden Endothelzellen die Möglichkeit bieten zu proliferieren und Blutgefäße zu bilden, während verbleibende Krebszellen eliminiert werden. Da der Prozess der Knochengeweberemodellierung mit einer starken Beeinträchtigung der Lebensqualität des Patienten einhergeht, ist die Beschleunigung des postoperativen Heilungsprozesses eines der Ziele des Tissue Engineerings. Die Bildung von Blutgefäßen ist unabdingbar für eine erfolgreiche Integration eines Knochentransplantats in das Gewebe. Daher ist ein umfangreich ausgebildetes Blutgefäßsystem für einen verbesserten Heilungsprozess während der klinischen Anwendung wünschenswert. Frühere Experimente zeigen, dass sich die Anwendung von Ko-Kulturen aus humanen primären Osteoblasten (pOB) und humanen outgrowth endothelial cells (OEC) im Hinblick auf die Bildung stabiler gefäßähnlicher Strukturen in vitro, die auch effizient in das mikrovaskuläre System in vivo integriert werden konnten, als erfolgreich erweisen. Dieser Ansatz könnte genutzt werden, um prä-vaskularisierte Konstrukte herzustellen, die den Knochenheilungsprozess nach der Implantation fördern. Zusätzlich repräsentiert das Ko-Kultursystem ein exzellentes in vitro Model, um Faktoren, welche stark in den Prozess der Knochenheilung und Angiogenese eingebunden sind, zu identifizieren und zu analysieren. Es ist bekannt, dass Makrophagen eine maßgebliche Rolle in der inflammatorisch-induzierten Angiogenese spielen. In diesem Zusammenhang hebt diese Studie den positiven Einfluss THP-1 abgeleiteter Makrophagen in Ko-Kultur mit pOB und OEC hervor. Die Ergebnisse zeigten, dass die Anwendung von Makrophagen als inflammatorischer Stimulus im bereits etablierten Ko-Kultursystem zu einer pro-angiogenen Aktivierung der OEC führte, was in einer signifikant erhöhten Bildung blutgefäßähnlicher Strukturen in vitro resultierte. Außerdem zeigte die Analyse von Faktoren, die in der durch Entzündung hervorgerufenen Angiogenese eine wichtige Rolle spielen, eine deutliche Hochregulation von VEGF, inflammatorischer Zytokine und Adhäsionsmoleküle, die letztlich zu einer verstärkten Vaskularisierung beitragen. Diese Resultate werden dem Einfluss von Makrophagen zugeschrieben und könnten zukünftig im Tissue Engineering eingesetzt werden, um den Heilungsprozess zu beschleunigen und damit die klinische Situation von Patienten zu verbessern. Darüber hinaus könnte die Kombination der auf Ko-Kulturen basierenden Ansätze für das Knochen Tissue Engineering mit einem biomaterial-basierenden Arzneimittelabgabesystem zum klinischen Einsatz kommen, der die Eliminierung verbliebener Krebszellen mit der Förderung der Knochenregeneration verbindet.