Evaluation of the efficacy of commercial sanitizers against adhered and planktonic cells of Listeria monocytogenes and Salmonella spp.

Antimicrobial activities of two commercial disinfectants, alone or combined with heat, against three Salmonella strains and three Listeria monocytogenes strains were studied. The efficacy of disinfectants against planktonic bacteria and bacteria attached to three food contact industrial surfaces (stainless steel, polytetraflourethylene, and rubber) was investigated. The tests were conducted using the sanitizer (quaternary ammonium compounds, and alquyldiethylenediamineglycine and di-alquyldiamineethylglycine) concentrations recommended by the manufacturers, and concentrations twice and four times higher than those values. The recommended concentrations were not effective to kill bacteria, especially when they were attached to surfaces. Concentrations of disinfectants twice and four times higher than those recommended were needed to fully eliminate planktonic bacteria. These same sanitizer concentrations were not sufficient to remove attached bacteria. To remove them from the surfaces, a treatment with recommended concentrations in combination with heat was needed. Our results indicate that these two pathogenic bacteria could survive common sanitation programs used in the food industry.

Postharvest technologies for mangosteen (Garcinia mangostana L.) conservation

The application of technologies to extend the postharvest life of mangosteen fruit was studied and compared to storage at 25 °C/70-75%R.H (25 °C control treatment). The fruits were packed in expanded polystyrene (EPS) trays (5 fruits/tray). Five treatments were carried out at 13 °C/ 90-95% RH: application of carnauba wax coating, lecithin + CMC (carboxymethyl cellulose) coating, 50 µm LDPE (low density polyethylene) film coating, 13 µm PVC (Polyvinyl chloride), and non-coated sample (13 °C control treatment). Physicochemical analyses were performed twice a week. A statistical design was completely randomized with 8 repetitions for each treatment plus the control treatment. The results were submitted to variance analysis, and the averages compared by the Tukey test at 5% probability. Among the quality parameters analyzed, more significant differences were observed for weight loss, texture, and peel moisture content. The results showed that the maximum storage period for mangosteen at 25 °C is two weeks; while storage at13 °C can guarantee the conservation of this fruit for 25 days. Therefore, the treatment at 13 °C/90-95% RH without the use of coatings and films was more effective and economical.

Physicochemical and microbiological characteristics of minimally processed 'Champagne' oranges (Citrus reticulata × Citrus sinensis) in different packgings

The objective of this study was to investigate the influence of the level of minimal processing and modified atmosphere on the quality of 'Champagne' orange stored under refrigeration. The fruits were subjected to the following processing: a) whole fruit without flavedo; b) whole fruit without flavedo and albedo; and c) segmented into wedges and packed as follows: uncoated packaging (control); polyethylene film; PVC film; gelatin-based edible films (3%); and polyesthyrene translucent plastic container with a lid. The minimally processed oranges were stored at 5 ± 1°C for 8 days and were subjected to physicochemical and microbiological analyses every two days. Greater weight loss occurred in fruits without flavedo and segmented, uncoated, and coated with the edible gelatin film During storage, there was a slight increase in Total Soluble Solids (TSS) for the treatments with greater weight loss and reduction in acidity and ascorbic acid, regardless of the packaging type. The microbial counts did not exceed the acceptable limits in the treatments; however, higher counts were observed at the end of storage. The minimally processed fruit packed in lidded polystyrene containers and polyethylene and PVC films kept their overall fresh visual appearance with a few physicochemical and microbiological changes up to the 8th day of storage.

Phisicochemical, sensory, and microbiological evaluation and development of symbiotic fermented drink

The goal of this study was to develop a symbiotic lacteous drink, evaluate its physicochemical and sensory characteristics, and verify the viability of Lactobacillus acidophilus in the drink. The milk serum-based drink consisted of 50% milk serum containing 10% saccharose, 25% powdered milk, 15% yacon pulp, and cultures of Lactobacillus acidophilus-La 5E and Bifidobacterium bifidum BB12. It was stored for up to 21 days under refrigeration. The milk serum-based drink was analyzed for protein, ether extract, total dietary fiber, total frutans, carbohydrate content, color, pH, acidity, and contamination by coliforms, and Salmonella sp. Coliforms and Salmonella sp were not detected, and L. acidophilus and B. bifidum provided satisfactory probiotic counts up to 21 days of storage under refrigeration. Lactobacillus acidophilus resistance to gastric acids and bile salts was detected only up to seven days of storage when evaluated in vitro. Sensory analysis and purchase viability were evaluated by consumers at 0, 7, 14, and 21 days of storage. Based on the analytical results and consumer evaluation, the drink was acceptable up to seven days of storage.

Biochemical changes and color properties of fresh-cut green bean (Phaseolus vulgaris L. cv.gina) treated with calcium chloride during storage

Calcium chloride is widely used in industries as a firming agent, and also to extend shelf-life of vegetables. The aim of this study was to determine, the effect of different doses of calcium chloride on biochemical and color properties of fresh-cut green bean. Fresh-cut green beans were dipped for 90 seconds in 0.5%, 1%, 2% and 3% solution of calcium chloride at 25°C. The fresh-cut green bean samples were packaged in polystyrene foam dishes, wrapped with stretch film and stored in a cold room at 5±1°C temperature and 85-90% RH. Calcium chloride treatments did not retain the green color of samples. Whiteness index, browning index and total color difference (ΔE) values of CaCl2 treated samples were high. Saturation index and hue angle were low compared to the control, especially at higher doses of CaCl2. Polyphenol oxidase (PPO) enzyme activity in samples treated with CaCl2 at 3% doses, was low at the 7th days of storage than with other treatments. Fructose and sucrose content of samples increased in all treatment groups whereas glucose level decreased during the first 4th days of storage.

Post-harvest conservation of camu–camu fruits (Myrciaria dubia (Kunth) Mc Vaugh) using different temperatures and packages

Abstract The camu-camu tree (Myrciaria dubia (Kunth) Mc Vaugh) is fruit-bearing tree belonging to the family Myrtaceae. This work was conducted with the purpose of evaluating the type of storage temperature and package which allow better conservation of the quality attributes of camu-camu. The experimental design utilized was the completely randomized with three replications in a factorial arrangement (3x3x8), constituted of three different storage temperatures (laboratory ambiente or 25 ± 2 °C, 15 °C and 20 °C), three types of packages (no package, PET and PVC) and fourteen days’ storage, the fruits being analyzed every two days. The fruits were evaluated as to fresh mass loss, pH, soluble solids contents, titrable acidity, ascorbic acid, carotenoids, anthocyanins, chlorophylls A and B and maturation index (SS/AT). According to the results obtained, the quality attributes and ascorbic acid content were conserved for longer time in the fruits stored on PVC-film covered expanded polystyrene trays at 15 °C. It follows that the best temperature for the storage of camu-camu is 15 °C and the package that best keeps its quality attributes is the PVC-film covered expanded polystyrene tray.

Characterization of amine-based CO2 adsorbent for Direct Air Capture

Direct air capture technologies extract CO2 from air at a concentration of as low as 400ppm. The captured CO2 can be used for the production of synthetic methane or liquid fuels. In the literature survey of this thesis, results related to direct air capture by using solid sorbents are presented and critically discussed. In the experimental part, a proprietary amine functionalized resin is characterized for direct air capture. Structural comparison is also made to a commercial resin of similar type. Based on the literature survey, the most important parameters in direct air capture process are low adsorption and desorption temperatures, good cyclic stability in dry and humid conditions, high CO2 outlet purity and a high working capacity. Primary amine functionalized solid sorbents are found to often have good qualities for direct air capture, but overall process performance is rarely studied exhaustively. Based on FTIR spectra, both resin adsorbents are found to be consisted of polystyrene functionalized with primary amine, and capture CO2 by forming carbamate. The commercial resin is more porous, has a slightly higher particle size and contains fewer impurities. Important physical parameters are gained of the proprietary resin, such as internal porosity and median particle size. The resin’s amine group is found to endure thermal treatment reasonably well. CO2 adsorption capacity gained by thermal gravimetry from 400ppm CO2 is highest at 25oC, and is found to be reasonable compared to values presented in literature. Thus, the resin is stated to exhibit promising qualities for direct air capture.

Physiological potential of Brachiaria brizantha cv. Marandu seeds kept in contact with phosphatic fertilizers

The effect of mixture of seeds of Brachiaria brizantha, cv. Marandu, with different sources, granulometry, and phosphatic fertilizer doses during various periods of exposure on the physiological potential of the seeds has been assessed. The treatments consisted in seed exposure during periods of 0, 3, 6, 12, 24, 36, 48, 72, 96, and 120 h to the following fertilizers: ground granulated single superphosphate (SS), and powdered (SSp); and ground granulated ammonium monophosphate (AMP), at doses of 40 and 80 kg P2O5 ha-1. Tests of germination, tetrazolium, moisture content, and vigor (first count, electrical conductivity, emergence, emergence speed, and fresh mass of seedlings) were performed. It has been concluded that seed physiological potential of B. brizantha cv. Marandu is reduced with increase on the exposure period to phosphatic fertilizer. Such effect, however, is dependent on the product source, granulometry, and dose. SSp was the most harmful to seeds, followed by SSp and AMP, respectively. Moreover, considering a 60% germination rate as acceptable, it may be inferred that seeds can be kept in contact with AMP and SSp, in dose of 80 kg of P2O5 ha-1, respectively, for periods of 71.2 and 16.2 hours.

Biotransformations of water insoluble substrates in aqueous, two-phase and encapsulated systems /

The biotransformation of water insoluble substrates by mammalian and bacterial cells has been problematic, since these whole cell reactions are primarily performed in an aqueous environment The implementation of a twophase or encapsulated system has the advantages of providing a low water system along with the physiological environment the cells require to sustain themselves. Encapsulation of mammalian cells by formation of polyamide capsules via interfacial polymerization illustrated that the cells could not survive this type of encapsulation process. Biotransformation of the steroid spironolactone [3] by human kidney carcinoma cells was performed in a substrate-encapsulated system, yielding canrenone [4] in 70% yield. Encapsulation of nitrile-metabolizing Rhodococcus rhodochrous cells using a polyamide membrane yielded leaky capsules, but biotransformation of 2-(4- chlorophenyl)-3-methylbutyronitrile (CPIN) [6] in a free cell system yielded CPIN amide [7] in 40% yield and 94% ee. A two-phase biotransformation of CPIN consisting of a 5:1 ratio of tris buffer, pH 7.2 to octane respectively, gave CPIN acid [8] in 30% yield and 97% ee. It was concluded that Rhodococcus rhodochrous ATCC 17895 contained a nonselective nitrile hydratase and a highly selective amidase enzyme.

Investigations into phosphorus removal by constructed wetlands : root bed media modifications /

A study has been conducted focusing on how the phosphorus renrx)val efficiency of a constructed wetland (CW) can be optimized through the selective enrichment of the substratum. Activated alumina and powdered iron were examined as possible enrichment compounds. Using packed glass column trials it was found that alumina was not suitable for the renx)val of ortho-phosphate from solution, while mixtures of powdered iron and quartz sand proved to be very efficient. The evaluation of iron/sand mixtures in CWs planted with cattails was performed in three stages; first using an indoor lab scale wetland, then an outdoor lab scale wetland, and finally in a small scale pilot project. For the lab scale tests, three basic configurations were evaluated: using the iron/sand as a pre-filter, in the root bed. and as a post filter. Primary lagoon effluent was applied to the test cells to simulate actual CW conditions, and the total phosphorus and iron concentrations of the influent and effluent were nfK)nitored. The pilot scale trials were limited to using only a post filter design, due to in-progress research at the pilot site. The lab scale tests achieved average renrK>val efficiencies greater than 91% for all indoor configurations, and greater than 97% for all outdoor configurations. The pilot scale tests had an average renK)val efficiency of 60%. This relatively low efficiency in the pilot scale can be attributed to the post filters being only one tenth the size of the lab scale test in terms of hydraulic loading (6 cm/day vs. 60 cm/day).

Sensitivities of Ontario isolates of Venturia inaequalis to metiram /

The effects of metiram (Polyram 80 DF) on the growth of Venturia inaequalis, cause of apple scab, and the degradation of metiram were examined in culture media. Samples of V. inaequalis conidia were collected from nine orchards in 1998 and six orchards in 1999 and tested for sensitivity. Samples were plated on water agar amended with metiram or mancozeb. Mean EC50 values (effective concentration of fungicide required to inhibit germination of half the conidia) for each population were calculated. The mean EC50 values for metiram ranged from 0.26 - 1.20 ^ig metiram a.i./ml, with differences (Student Newman Keul's Test (SNK), a=0.05) between populations. EC50 values for mancozeb ranged from 0.06 - 0.58 which were also different (SNK, a=0.05). Five of these populations were examined for mycelial growth sensitivity to metiram by testing 30 monoconidial isolates from each population on metiram amended potato dextrose agar. Mean EC50 values for populations were calculated and ranged from 3.44-5.94 |ig metiram/ml, and showed differences (Friedman Test, a=0.05). As the EC50 values obtained are far less than the concentrations applied in the field, results indicate that Ontario populations of V. inaequalis are still sensitive to metiram and mancozeb. The stability of metiram in PDA at 22°C was studied over a 10-day period. The initial concentration of metiram decreased by approximately 50% within the first day, and continued to decline slowly, to approximately 20% of the initial concentration. The factors possibly affecting initial metiram degradation, including agar, heat, and the use of glass or polystyrene Petri dish composition were examined. The effects from the polystyrene in the Petri dish composition were negligible, however more studies must be done to examine metiram degradation during the first 24 hours of preparation.

Hydrosilylation and hydroboration catalyzed by imido-hydride complexes of molybdenum (IV)

This thesis describes the synthesis, structural studies, stoichiometric and catalytic reactivity of novel Mo(IV) imido hydride complexes (Cp)(ArN)Mo(H)(PMe3) (1) and (Tp )(ArN)Mo(H)(PMe3) (2). Both 1 and 2 catalyze hydrosilylation of a variety of carbonyls. Detailed kinetic and DFT studies found that 1 reacts by an unexpected associative mechanism, which does not involve Si-H addition either to the imido group or the metal. Despite 1 being a d2 complex, its reaction with PhSiH3 proceeds via a a-bond metathesis mechanism giving the silyl derivative (Cp )(ArN)Mo(SiH2Ph)(PMe3). In the presence of BPh3 reaction of 1 with PhSiH3 results in formation of (Cp)(ArN)Mo(SiH2Ph)(H)2 and (Cp)(ArN)Mo(SiH2Ph)2(H), the first examples ofMo(VI) silyl hydrides. AI: 1 : 1 reaction between 2, PhSiD3 and carbonyl substrate established that hydrosilylation is not accompanied by deuterium incorporation into the hydride position of the catalyst, thus ruling out the conventional mechanism based on carbonyl insertion carbonyl. As 2 is nomeactive to both the silane and ketone, the only mechanistic alternative we are left with is that the metal center activates the carbonyl as a Lewis acid. The analogous nonhydride mechanism was observed for the catalysis by (ArN)Mo(H)(CI)(PMe3), (Ph3P)2(I)(O)Re(H)(OSiMe2Ph) and (PPh3CuH)6. Complex 2 also catalyzes hydroboration of carbonyls and nitriles. We report the first case of metal-catalyzed hydroboration of nitriles as well as hydroboration of carbonyls at very mild conditions. Conversion of carbonyl functions can be performed with high selectivities in the presence of nitrile groups. This thesis also reports the first case of the HlH exchange between H2 and Si-H of silanes mediated by Lewis acids such as Mo(IV) , Re(V) , Cu(I) , Zn(II) complexes, B(C6Fs)3 and BPh3.

Interlake Tissue Mills Fire Slides

The Interlake Tissue Mills storage location was at the intersection of Glendale and Merritt Street in Merritton. In the 1850s, the Beaver Cotton Mills (later Merritton Cotton Mills) was built. It was a frame building that burned down in 1881. A sandstone structure replaced the previous building. In 1906, the cotton mill closed and in 1912, the Independent Rubber Company took over the building. The mill was doubled in size. The rubber company remained there for ten years and then the building remained vacant until 1935. Interlake Tissue Mills acquired the building for storage purposes. A fire razed the larger of the plant’s buildings on Memorial Day weekend in 1961. After the fire, Domtar used the smaller building for storage for a short time. This is currently the site of the Keg Restaurant.

Canada Starch Company (CASCO) Fonds, 1980-1987, n.d.

CASCO (Canada Starch Company) began operations in 1982 and was officially opened in May of 1983. Premier William Davis was in attendance. CASCO is a company whose roots can be traced back to 1858 when it was founded by W.T. Benson in Cardinal, Ontario. The company grew as corn uses were developed. Corn derived products now include: corn oil, liquid sweetener and feed for dairy and cattle. Starch is used as a finish for fine papers, a component in dry cell batteries, pharmaceuticals, wallpaper, film, tires, surgical dressings, plastics and plywood. Corn syrup is used in beverages, canned fruit, frozen seafood, licorice, ice cream and baking products. Corn solubles are used in animal feed, rubber substitutes, soap, paint and varnish. There are more than 250 industrial and food uses for corn

Influence de l’agrégation érythrocytaire sur la migration axiale de microparticules simulant des plaquettes sanguines

Lors du phénomène d’hémostase primaire ou de thrombose vasculaire, les plaquettes sanguines doivent adhérer aux parois afin de remplir leur fonction réparatrice ou pathologique. Pour ce faire, certains facteurs rhéologiques et hémodynamiques tels que l’hématocrite, le taux de cisaillement local et les contraintes de cisaillement pariétal, entrent en jeu afin d’exclure les plaquettes sanguines de l’écoulement principal et de les transporter vers le site endommagé ou enflammé. Cette exclusion pourrait aussi être influencée par l’agrégation de globules rouges qui est un phénomène naturel présent dans tout le système cardiovasculaire selon les conditions d’écoulement. La dérive de ces agrégats de globules rouges vers le centre des vaisseaux provoque la formation de réseaux d’agrégats dont la taille et la complexité varient en fonction de l’hématocrite et des conditions de cisaillement présentes. Il en résulte un écoulement bi-phasique avec un écoulement central composé d’agrégats de globules rouges avoisinés par une région moins dense en particules où l’on peut trouver des globules rouges singuliers, des petits rouleaux de globules rouges et une importante concentration en plaquettes et globules blancs. De ce fait, il est raisonnable de penser que plus la taille des agrégats qui occupent le centre du vaisseau augmente, plus il y aura de plaquettes expulsées vers les parois vasculaires. L'objectif du projet est de quantifier, in vitro, la migration des plaquettes sanguines en fonction du niveau d’agrégation érythrocytaire présent, en faisant varier l’hématocrite, le taux de cisaillement et en promouvant l’agrégation par l’ajout d’agents tels que le dextran à poids moléculaire élevé. Cependant, le comportement non Newtonien du sang dans un écoulement tubulaire peut être vu comme un facteur confondant à cause de son impact sur l’organisation spatiale des agrégats de globules rouges. De ce fait, les études ont été réalisées dans un appareil permettant de moduler, de façon homogène, la taille et la structure de ces agrégats et de quantifier ainsi leur effet sur la migration axiale des plaquettes. Du sang de porc anti coagulé a été ajusté à différents taux d’hématocrite et insérer dans un appareil à écoulement de Couette, à température ambiante. Les plaquettes sanguines, difficilement isolables in vitro sans en activer certains ligands membranaires, ont été remplacées par des fantômes en polystyrène ayant un revêtement de biotine. La quantification de la migration de ces fantômes de plaquettes a été réalisée grâce à l’utilisation de membranes biologiques fixées sur les parois internes de l’entrefer du rhéomètre de Couette. Ces membranes ont un revêtement de streptavidine assurant une très forte affinité d’adhésion avec les microparticules biotynilées. À 40% d’hématocrite, à un cisaillement de 2 s-1, 566 ± 53 microparticules ont été comptées pour un protocole préétabli avec du sang non agrégeant, comparativement à 1077 ± 229 pour du sang normal et 1568 ± 131 pour du sang hyper agrégeant. Les résultats obtenus suggèrent une nette participation de l’agrégation érythrocytaire sur le transport des fantômes de plaquettes puisque l’adhésion de ces derniers à la paroi du rhéomètre de Couette augmente de façon quasi exponentielle selon le niveau d’agrégation présent.