Superactivation of metal electrode surfaces and its relevance to COads oxidation at fuel cell anodes

The inhibiting effect of COads on platinum-based anodes is a major problem in the development of ambient temperature, polyelectrolyte membrane-type fuel cells. One of the unusual features of the response for the oxidative removal of the species in question is that the response observed for this reaction in the positive sweep is highly dependent on the CO admission potential, for example, when the COads is formed in the Hads region it undergoes oxidation at unusually low potentials. Such behaviour is attributed here to hydrogen activation of the platinum surface, with the result that oxide mediators (and COads oxidation) occurs at an earlier stage of the positive sweep. It is also demonstrated, for both platinum and gold in acid solution, that dramatic premonolayer oxidation responses may be observed following suitable preactivation of the electrode surfaces. It is suggested that the defect state of a solid electrode surface is an important variable whose investigation may yield improved fuel cell anode performance.

The active site behaviour of electrochemically synthesised gold nanomaterials

Even though gold is the noblest of metals, a weak chemisorber and is regarded as being quite inert, it demonstrates significant electrocatalytic activity in its nanostructured form. It is demonstrated here that nanostructured and even evaporated thin films of gold are covered with active sites which are responsible for such activity. The identification of these sites is demonstrated with conventional electrochemical techniques such as cyclic voltammetry as well as a large amplitude Fourier transformed alternating current (FT-ac) method under acidic and alkaline conditions. The latter technique is beneficial in determining if an electrode process is either Faradaic or capacitive in nature. The observed behaviour is analogous to that observed for activated gold electrodes whose surfaces have been severely disrupted by cathodic polarisation in the hydrogen evolution region. It is shown that significant electrochemical oxidation responses occur at discrete potential values well below that for the formation of the compact monolayer oxide of bulk gold and are attributed to the facile oxidation of surface active sites. Several electrocatalytic reactions are explored in which the onset potential is determined by the presence of such sites on the surface. Significantly, the facile oxidation of active sites is used to drive the electroless deposition of metals such as platinum, palladium and silver from their aqueous salts on the surface of gold nanostructures. The resultant surface decoration of gold with secondary metal nanoparticles not only indicates regions on the surface which are rich in active sites but also provides a method to form interesting bimetallic surfaces.

The electrochemical corrosion behaviour of quaternary gold alloys when exposed to 3.5% NaCl solution

Lower carat gold alloys, specifically 9 carat gold alloys, containing less than 40 % gold, and alloying additions of silver, copper and zinc, are commonly used in many jewellery applications, to offset high costs and poor mechanical properties associated with pure gold. While gold is considered to be chemically inert, the presence of active alloying additions raises concerns about certain forms of corrosion, particularly selective dissolution of these alloys. The purpose of this study was to systematically study the corrosion behaviour of a series of quaternary gold–silver–copper–zinc alloys using dc potentiodynamic scanning in saline (3.5 % NaCl) environment. Full anodic/cathodic scans were conducted to determine the overall corrosion characteristics of the alloy, followed by selective anodic scans and subsequent morphological and compositional analysis of the alloy surface and corroding media to determine the extent of selective dissolution. Varying degrees of selective dissolution and associated corrosion rates were observed after anodic polarisation in 3.5 % NaCl, depending on the alloy composition. The corrosion behaviour of the alloys was determined by the extent of anodic reactions which induce (1) formation of oxide scales on the alloy surface and or (2) dissolution of Zn and Cu species. In general, the improved corrosion characteristics of alloy #3 was attributed to the composition of Zn/Cu in the alloy and thus favourable microstructure promoting the formation of protective oxide/chloride scales and reducing the extent of Cu and Zn dissolution.

The buckling behaviour of hollow flange beams

A new cold formed structural section known as the hollow flange beam is currently under development in Australia. This section will have many applications, particularly in portal frame buildings. This paper discusses the lateral distortional buckling behaviour of the hollow flange beam.

Computer simulation of the fatigue behaviour of roof cladding during the passage of a tropical cyclone

This paper describes the development of an analytical model used to simulate the fatigue behaviour of roof cladding during the passage of a tropical cyclone. The model incorporated into a computer program uses wind pressure data from wind tunnel tests in combination with time history information on wind speed and direction during a tropical cyclone, and experimental fatigue characteristics data of roof claddings. The wind pressure data is analysed using a rainflow form of analysis, and a fatigue damage index calculated using a modified form of Miner's rule. Some of the results obtained to date and their significance in relation to the review of current fatigue tests are presented. The model appears to be reasonable for comparative estimation of fatigue life, but an improvement of Miner's rule is required for the prediction of actual fatigue life.

Behaviour and design of crest-fixed profiled steel roof claddings under wind uplift

Profiled steel roof claddings in Australia are commonly made of very thin high tensile steel and are crest-fixed with screw fasteners. At present the design of these claddings is entirely based on testing. In order to improve the understanding of the behaviour of these claddings under wind uplift, and thus the design methods, a detailed investigation consisting of a finite element analysis and laboratory experiments was carried out on two-span roofing assemblies of three common roofing profiles. It was found that the failure of the roof cladding system was due to a local failure (dimpling of crests/pull-through) at the fasteners. This paper presents the details of the investigation, the results and then proposes a design method based on the strength of the screwed connections, for which testing of small-scale roofing models and/or using a simple design formula is recommended.

Local buckling behaviour of steel plate elements supported by a plastic foam material

Sandwich panels comprising steel facings and a polystyrene foam core are increasingly used as roof and wall claddings in buildings in Australia. When they are subjected to loads causing bending and/or axial compression, the steel plate elements of their profiled facing are susceptible to local buckling. However, when compared to panels with no foam core, they demonstrate significantly improved local buckling behaviour because they are supported by foam. In order to quantify such improvements and to validate the use of available design buckling stress formulae, an investigation using finite element analyses and laboratory experiments was carried out on steel plates that are commonly used in Australia of varying yield stress and thickness supported by a polystyrene foam core. This paper presents the details of this investigation, the buckling results and their comparison with available design buckling formulae.

Young women’s experiences as consumers of maternity care in Queensland

Background: Young motherhood is commonly associated with vulnerabilities, stereotyping of young women’s behaviour and poor outcomes for them and their children. The objective was to understand how maternity care is experienced for this group in the transition to parenthood. Methods: Data from a large-scale 2010 survey of women’s experience of maternity care were analysed using qualitative methods with open text responses. Results: 7,193 women responded to the survey: 237 were aged 20 years or less. Most (83%) of these young women provided open text responses. The main themes were: ‘being a consumer’, ‘the quality of care’, ‘needing support’ and ‘pride in parenthood’ while subthemes included ‘being young’ and ‘how staff made me feel’, ‘testimonials for staff’, ‘not being left’ and ‘it’s all worthwhile’. Conclusion: Many young women responding described a positive experience. For many first time mothers this marked a positive change in their identity. Nevertheless staff perceptions and attitudes affected how they saw themselves and what they took away from their experience of maternity care. A key message for other women supported and reinforced their role as active and involved consumers who, in engaging with services, have to stand up for themselves and make their needs and wishes known.

A Bayesian network approach to modelling temporal behaviour of Lyngbya majuscula bloom initiation

Lyngbya majuscula is a cyanobacterium (blue-green algae) occurring naturally in tropical and subtropical coastal areas worldwide. Deception Bay, in Northern Moreton Bay, Queensland, has a history of Lyngbya blooms, and forms a case study for this investigation. The South East Queensland (SEQ) Healthy Waterways Partnership, collaboration between government, industry, research and the community, was formed to address issues affecting the health of the river catchments and waterways of South East Queensland. The Partnership coordinated the Lyngbya Research and Management Program (2005-2007) which culminated in a Coastal Algal Blooms (CAB) Action Plan for harmful and nuisance algal blooms, such as Lyngbya majuscula. This first phase of the project was predominantly of a scientific nature and also facilitated the collection of additional data to better understand Lyngbya blooms. The second phase of this project, SEQ Healthy Waterways Strategy 2007-2012, is now underway to implement the CAB Action Plan and as such is more management focussed. As part of the first phase of the project, a Science model for the initiation of a Lyngbya bloom was built using Bayesian Networks (BN). The structure of the Science Bayesian Network was built by the Lyngbya Science Working Group (LSWG) which was drawn from diverse disciplines. The BN was then quantified with annual data and expert knowledge. Scenario testing confirmed the expected temporal nature of bloom initiation and it was recommended that the next version of the BN be extended to take this into account. Elicitation for this BN thus occurred at three levels: design, quantification and verification. The first level involved construction of the conceptual model itself, definition of the nodes within the model and identification of sources of information to quantify the nodes. The second level included elicitation of expert opinion and representation of this information in a form suitable for inclusion in the BN. The third and final level concerned the specification of scenarios used to verify the model. The second phase of the project provides the opportunity to update the network with the newly collected detailed data obtained during the previous phase of the project. Specifically the temporal nature of Lyngbya blooms is of interest. Management efforts need to be directed to the most vulnerable periods to bloom initiation in the Bay. To model the temporal aspects of Lyngbya we are using Object Oriented Bayesian networks (OOBN) to create ‘time slices’ for each of the periods of interest during the summer. OOBNs provide a framework to simplify knowledge representation and facilitate reuse of nodes and network fragments. An OOBN is more hierarchical than a traditional BN with any sub-network able to contain other sub-networks. Connectivity between OOBNs is an important feature and allows information flow between the time slices. This study demonstrates more sophisticated use of expert information within Bayesian networks, which combine expert knowledge with data (categorized using expert-defined thresholds) within an expert-defined model structure. Based on the results from the verification process the experts are able to target areas requiring greater precision and those exhibiting temporal behaviour. The time slices incorporate the data for that time period for each of the temporal nodes (instead of using the annual data from the previous static Science BN) and include lag effects to allow the effect from one time slice to flow to the next time slice. We demonstrate a concurrent steady increase in the probability of initiation of a Lyngbya bloom and conclude that the inclusion of temporal aspects in the BN model is consistent with the perceptions of Lyngbya behaviour held by the stakeholders. This extended model provides a more accurate representation of the increased risk of algal blooms in the summer months and show that the opinions elicited to inform a static BN can be readily extended to a dynamic OOBN, providing more comprehensive information for decision makers.

What roles do team climate, roster control, and work life conflict play in shiftworkers’ fatigue longitudinally?

The study aimed to examine shiftworkers fatigue and the longitudinal relationships that impact on fatigue such as team climate, work life conflict, control of shifts and shift type in shift working nurses. We used a quantitative survey methodology and analysed data with a moderated hierarchical multiple regression. After matching across two time periods 18 months apart, the sample consisted of 166 nurses from one Australian hospital. Of these nurses, 61 worked two rotating day shifts (morning & afternoon/evening) and 105 were rotating shiftworkers who worked three shifts (morning afternoon/evening and nights). The findings suggest that control over shift scheduling can have significant effects on fatigue for both two-shift and three-shift workers. A significant negative relationship between positive team climate and fatigue was moderated by shift type. At both Time 1 and Time 2, work life conflict was the strongest predictor of concurrent fatigue, but over time it was not.

The effect of consumer education on unit price usage : an early exploratory study

Consumer awareness and usage of Unit Price (UP) information continues to hold academic interest. Originally designed as a device to enable shoppers to make comparisons between grocery products, it is argued consumers still lack a sufficient understanding of the device. Previous research has tended to focus on product choice, effect of time, and structural changes to price presentation. No studies have tested the effect of UP consumer education on grocery shopping expenditure. Supported by distributed learning theories, this is the first study to condition participants over a twenty week period, to comprehend and employ UP information while shopping. A 3x5 mixed factorial design was employed to collect data from 357 shoppers. A 3 (Control, Massed, Spaced) x 5 (Time Point: Week 0, 5, 10, 15 and 20) mixed factorial analysis of variance (ANOVA) was performed to analyse the data. Preliminary results revealed that the three groups differed in their average expenditure over the twenty weeks. The Control group remained stable across the five time points. Results indicated that both intensive (Massed) and less intensive (Spaced) exposure to UP information achieved similar results, with both group reducing average expenditure similarly by Week 5. These patterns held for twenty weeks, with conditioned groups reducing their grocery expenditure by over 10%. This research has academic value as a test of applied learning theories. We argue, retailers can attain considerable market advantages as efforts to enhance customers’ knowledge, through consumer education campaigns, can have a positive and strong impact on customer trust and goodwill toward the organisation. Hence, major practical implications for both regulators and retailers exist.

Give some, get some: investigating the relationship between conspicuous donation behaviour on social media and customer value in a blood donation context

Previous research has questioned the role of altruism in charitable donation and suggests that such behaviour is also motivated by self-interest, such as public recognition or emotional satisfaction. Recognising this, not-for-profit organisations have developed strategies that allow individuals to donate conspicuously, and are at an embryonic stage of turning to social media to provide such recognition. Under investigation in this paper, is the relationship between conspicuous donation behaviour (CDB) on social media and customer value, in blood donation. Online survey results, from a sample of 186 Australian blood donors, support the proposed framework. Significant relationships between self-orientated CDB and emotional value, and other-orientated CDB and social value are demonstrated. The findings provide valuable insights into the use of conspicuous donation strategies on social media as a means to add value to the donation experience, and contribute to our understanding into the under-researched areas of CDB and customer value.

Self-gifting guilt : an examination of self-gifting motivations and post-purchase regret

Purpose Self-gifting is a performative process in which consumers purchase products for themselves. The literature to date remains silent on a determination and connection between the extents of post-purchase regret resulting from self-gifting behavior. The purpose of this paper is to examine identification and connection of self-gifting antecedents, self-gifting and the effect on post purchase regret. Design/methodology/approach This study claims the two antecedents of hedonistic shopping and indulgence drive self-gifting behaviors and the attendant regret. A total of 307 shoppers responded to a series of statements concerning the relationships between antecedents of self-gifting behavior and the effect on post-purchase regret. Self-gifting is a multi-dimensional construct, consisting of therapeutic, celebratory, reward and hedonistic imports. Confirmatory factor analysis and AMOS path modeling enabled examination of relationships between the consumer traits of hedonistic shopping and indulgence and the four self-gifting concepts. Findings Hedonic and indulgent shoppers engage in self-gifting for different reasons. A strong and positive relationship was identified between hedonic shoppers and reward, hedonic, therapeutic and celebratory self-gift motivations. hedonic shoppers aligned with indulgent shoppers who also engaged the four self-gifting concepts. The only regret concerning purchase of self-gifts was evident in the therapeutic and celebratory self-gift motivations. Research limitations/implications A major limitation was the age range specification of 18 to 45 years which meant the omission of older generations of regular and experienced shoppers. This study emphasizes the importance of variations in self-gift behaviors and of post-purchase consumer regret. Originality/value This research is the first examination of an hedonic attitude to shopping and indulgent antecedents to self-gift purchasing, the concepts of self-gift motivations and their effect on post-purchase regret.