Characteristics of sulfide corrosion products on 316L stainless steel surfaces in the presence of sulfate-reducing bacteria

It has been found that microbial communities play a significant role in the corrosion process of steels exposed in aquatic and soil environments. Biomineralization influenced by microorganisms is believed to be responsible for the formation of corrosion products via complicated pathways of electron transfer between microbial cells and the metal. In this study, sulfide corrosion products were investigated for 316L stainless steel exposed to media with sulfate-reducing bacteria media for 7 weeks. The species of inorganic and organic sulfides in the passive film on the stainless steel were observed by epifluorescence microscope, environmental scanning electron microscope combined with energy dispersive spectroscopy and X-ray photoelectron spectroscopy. The transformation from metal oxides to metal sulfides influenced by sulfate-reducing bacteria is emphasized in this paper. (c) 2005 Elsevier B.V. All rights reserved.

Which of the three action-oriented corporate social responsibility (CSR) types is the most effective in improving the public attitude toward tobacco companies?

Dissertação apresentada à Universidade Fernando Pessoa como parte dos requisitos para a obtenção do grau de Mestre em Ciências da Comunicação, ramo de Marketing e Publicidade

The empirical analysis of cigarette tax avoidance and illicit trade in Vietnam, 1998-2010.

Illicit trade carries the potential to magnify existing tobacco-related health care costs through increased availability of untaxed and inexpensive cigarettes. What is known with respect to the magnitude of illicit trade for Vietnam is produced primarily by the industry, and methodologies are typically opaque. Independent assessment of the illicit cigarette trade in Vietnam is vital to tobacco control policy. This paper measures the magnitude of illicit cigarette trade for Vietnam between 1998 and 2010 using two methods, discrepancies between legitimate domestic cigarette sales and domestic tobacco consumption estimated from surveys, and trade discrepancies as recorded by Vietnam and trade partners. The results indicate that Vietnam likely experienced net smuggling in during the period studied. With the inclusion of adjustments for survey respondent under-reporting, inward illicit trade likely occurred in three of the four years for which surveys were available. Discrepancies in trade records indicate that the value of smuggled cigarettes into Vietnam ranges from $100 million to $300 million between 2000 and 2010 and that these cigarettes primarily originate in Singapore, Hong Kong, Macao, Malaysia, and Australia. Notable differences in trends over time exist between the two methods, but by comparison, the industry estimates consistently place the magnitude of illicit trade at the upper bounds of what this study shows. The unavailability of annual, survey-based estimates of consumption may obscure the true, annual trend over time. Second, as surveys changed over time, estimates relying on them may be inconsistent with one another. Finally, these two methods measure different components of illicit trade, specifically consumption of illicit cigarettes regardless of origin and smuggling of cigarettes into a particular market. However, absent a gold standard, comparisons of different approaches to illicit trade measurement serve efforts to refine and improve measurement approaches and estimates.

Study of the rheological behaviour of Sn-Ag-Cu solder pastes and their correlation with printing performance

Solder paste plays an important role in the electronic assembly process by providing electrical, mechanical and thermal bonding between the components and the substrate. The rheological characterisation of pastes is an important step in the design and development of new paste formulations. With the ever increasing trend of miniaturisation of electronic products, the study of the rheological properties of solder pastes is becoming an integral part in the R&D of new paste formulations and in the quality monitoring and control during paste manufacture and electronic assembly process. This research work outlines some of the novel techniques which can be successfully used to investigate the rheology of leadfree solder pastes. The report also presents the results of the correlation of rheological properties with solder paste printing performance. Four different solder paste samples (namely paste P1, P2, P3 and P4) with different flux vehicle systems and particle size distributions were investigated in the study. As expected, all the paste samples showed shear thinning behaviour. Although the samples displayed similar flow behaviour at high shear rates, differences were observed at low shear rates. In the stencil printing trials, round deposits showed better results than rectangular deposits in terms of paste heights and aperture filling. Our results demonstrate a good correlation between higher paste viscosity and good printing performance. The results of the oscillatory and thixotropy tests were also successfully correlated to the printing behaviour of solder paste.

Age and gender influences on sensory perceptions of novel low cost nutrient-rich food products developed using traditional Ghanaian food ingredients

Background: A number of factors are known to influence food preferences and acceptability of new products. These include their sensory characteristics and strong, innate neural influences. In designing foods for any target group, it is important to consider intrinsic and extrinsic characteristics which may contribute to palatability, and acceptability of foods. Objective: To assess age and gender influences on sensory perceptions of novel low cost nutrient-rich food products developed using traditional Ghanaian food ingredients. Materials and Methods: In this study, a range of food products were developed from Ghanaian traditional food sources using the Food Multimix (FMM) concept. These products were subjected to sensory evaluation to assess the role of sensory perception on their acceptability among different target age groups across the life cycle (aged 11-68 years olds) and to ascertain any possible influences of gender on preference and choice. Variables including taste, odour, texture, flavour and appearance were tested and the results captured on a Likert scale and scores of likeness and acceptability analysed. Multivariate analyses were used to develop prediction models for targeted recipe development for different target groups. Multiple factor analysis of variance (ANOVA) and logistic linear regression were employed to test the strength of acceptability and to ascertain age and gender influences on product preference. Results: The results showed a positive trend in acceptability (r = 0.602) which tended towards statistical significance (p = 0.065) with very high product favourability rating (91% acceptability; P=0.005). However, age [odds ratios=1.44 (11-15 years old) odds ratios=2.01 (18-68 years old) and gender (P=0.000)] were major influences on product preference with children and females (irrespective of age) showing clear preferences or dislike of products containing certain particular ingredients. Conclusion: These findings are potentially useful in planning recipes for feeding interventions involving different vulnerable and target groups.

Investigation of wall-slip effect on paste release characteristic in flip-chip stencil printing process

As the trend toward further miniaturisation of pocket and handheld consumer electronic products continues apace, the requirements for even smaller solder joints will continue. With further reductions in the size of solder joints, the reliability of solder joints will become more and more critical to the long-term performance of electronic products. Solder joints play an important role in electronics packaging, serving both as electrical interconnections between the components and the board, and as mechanical support for components. With world-wide legislation for the removal/reduction of lead and other hazardous materials from electrical and electronic products, the electronics manufacturing industry has been faced with an urgent search for new lead-free solder alloy systems and other solder alternatives. In order to achieve high volume, low cost production, the stencil printing process and subsequent wafer bumping of solder paste has become indispensable. There is wide agreement in industry that the paste printing process accounts for the majority of assembly defects, and most defects originate from poor understanding of the effect of printing process parameters on printing performance. The printing of ICAs and lead-free solder pastes through the very small stencil apertures required for flip chip applications was expected to result in increased stencil clogging and incomplete transfer of paste to the printed circuit pads. Paste release from the stencil apertures is dependent on the interaction between the solder paste, surface pad and aperture wall; including its shape. At these very narrow aperture sizes the paste rheology becomes crucial for consistent paste withdrawal because for smaller paste volumes surface tension effects become dominant over viscous flow. Successful aperture filling and release will greatly depend on the rheology of the paste material. Wall-slip plays an important role in characterising the flow behaviour of solder paste materials. The wall- slip arises due to the various attractive and repulsive forces acting between the solder particles and the walls of the measuring geometry. These interactions could lead to the presence of a thin solvent layer adjacent to the wall, which gives rise to slippage. The wall slip effect can play an important role in ensuring successful paste release after the printing process. The aim of this study was to investigate the influence of the paste microstructure on slip formation for the paste materials (lead-free solder paste and isotropic conductive adhesives). The effect of surface roughness on the paste viscosity was investigated. It was also found that altering the surface roughness of the parallel plate measuring geometry did not significantly eliminate wall slip as was expected. But results indicate that the use of a relatively rough surface helps to increase paste adhesion to the plates, inducing structural breakdown of the paste. Most importantly, the study also demonstrated on how the wall slip formation in the paste material could be utilised for understanding of the paste microstructure and its flow behaviour

Upregulation of Oxidative Stress Markers in Human Microvascular Endothelial Cells by Complexes of Serum Albumin and Digestion Products of Glycated Casein

The extent of absorption of dietary advanced glycation end products (AGEs) is not fully known. The possible physiological impact of these absorbed components on inflammatory processes has been studied little and was the aim of this investigation. Aqueous solutions of bovine casein and glucose were heated at 95 degrees C for 5 h to give AGE-casein (AGE-Cas). Simulated stomach and small intestine digestion of AGE-Cas and dialysis (molecular mass cutoff of membrane = 1 kDa) resulted in a low molecular mass (LMM) fraction of digestion products, which was used to prepare bovine serum albumin (BSA)-LMM-AGE-Cas complexes. Stimulation of human microvascular endothelial cells with BSA-LMM-AGE-Cas complexes significantly increased mRNA expression of the receptor of AGE (RAGE), galectin-3 (AGE-113), tumor necrosis factor alpha, and a marker of the mitogen-activated protein kinase pathway (MAPK-1), as well as p65NF-kappa B activation. Cells treated with LMM digestion products of AGE-Cas significantly increased AGE-R3 mRNA expression. Intracellular reactive oxygen species production increased significantly in cells challenged with BSA-LMM-AGE-Cas and LMM-AGE-Cas. In conclusion, in an in vitro cell system, digested dietary AGEs complexed with serum albumin play a role in the regulation of RAGE and down-stream inflammatory pathways. AGE-R3 may protect against these effects.

Experiences with mephedrone pre- and post-legislative controls: Perceptions of safety and sources of supply

Background: Drug scenes within several countries have changed in recent years to incorporate a range of licit psychoactive products, collectively known as “legal highs.” Hundreds of different legal high products have been described in the literature. Many of these products contain synthetic stimulants that allegedly
“mirror” the effects of some illicit drugs. In 2009–2010, growing concern by the UK and Irish governments focused on mephedrone, a synthetic stimulant that had become embedded within several drug scenes in Britain and Ireland. In April 2010, mephedrone and related cathinone derivatives were banned under
the UK’s Misuse of Drugs Act 1971. Setting aside “worse case scenarios” that have been portrayed by UK and Irish media, little is known about mephedrone use from the consumer’s perspective. The purpose of this paper was to (1) explore respondents’ experiences with mephedrone, (2) examine users’ perceptions
about the safety of mephedrone, and primarily to (3) examine sources of mephedrone supply during the pre- and post-ban periods.
Methods: Semi-structured interviews were conducted with 23 adults who had used mephedrone during 2009–2010. Data collection occurred in May and June 2010, following the ban on mephedrone. A total of 20/23 respondents had used mephedrone during the post-ban period, and the vast majority had prior
experience with ecstasy or cocaine. Respondents’ ages ranged from 19 to 51, approximately half of the sample were female and the majority (19 of 23) were employed in full- or part-time work.
Results: Most respondents reported positive experiences with mephedrone, and for some, the substance emerged as a drug of choice. None of the respondents reported that the once-legal status of mephedrone implied that it was safe to use. Very few respondents reported purchasing mephedrone from street-based
or on-line headshops during the pre-ban period, and these decisions were guided in part by respondents’ attempts to avoid “drug user” identities. Most respondents purchased or obtained mephedrone from friends or dealers, and mephedrone was widely available during the 10-week period following the ban. Respondents reported a greater reliance on dealers and a change in mephedrone packaging following the criminalisation of mephedrone.
Conclusion: The findings are discussed in the context of what appears to be a rapidly changing mephedrone market. We discuss the possible implications of criminalising mephedrone, including the potential displacement effects and the development of an illicit market.

Tensor products of operator systems

The purpose of the present paper is to lay the foundations for a systematic study of tensor products of operator systems. After giving an axiomatic definition of tensor products in this category, we examine in detail several particular examples of tensor products, including a minimal, maximal, maximal commuting, maximal injective and some asymmetric tensor products. We characterize these tensor products in terms of their universal properties and give descriptions of their positive cones. We also characterize the corresponding tensor products of operator spaces induced by a certain canonical inclusion of an operator space into an operator system. We examine notions of nuclearity for our tensor products which, on the category of C*-algebras, reduce to the classical notion. We exhibit an operator system S which is not completely order isomorphic to a C*-algebra yet has the property that for every C*-algebra A, the minimal and maximal tensor product of S and A are equal.

Survey of arsenic and its speciation in rice products such as breakfast cereals, rice crackers and Japanese rice condiments

Rice has been demonstrated to be one of the major contributors to arsenic (As) in human diets in addition to drinking water, but little is known about rice products as an additional source of As exposure. Rice products were analyzed for total As and a subset of samples were measured for arsenic speciation using high performance liquid chromatography interfaced with inductively coupled plasma-mass spectrometry (HPLC-ICP-MS). A wide range of rice products had total and inorganic arsenic levels that typified those found in rice grain including, crisped rice, puffed rice, rice crackers, rice noodles and a range of Japanese rice condiments as well as rice products targeted at the macrobiotic, vegan, lactose intolerant and gluten intolerance food market. Most As in rice products are inorganic As (75.2-90.1%). This study provides a wider appreciation of how inorganic arsenic derived from rice products enters the human diet. (C) 2008 Elsevier Ltd. All rights reserved.

Patterns of use of natural health products by Ontario seniors

A random dialing telephone survey of 1,071 60+ year-olds in 4 Ontario communities identified 553 (52%) users of natural health products. Mean age was 72 yrs (min-max:60-95); 76% were female. The most frequently reported natural health products were: echinacea (27%), glucosamine (26%), garlic (20%), ginkgo biloba (10%), St. John's wort (5%), ginseng (5%), flax seed oil (3%), evening primrose oil (2%), devil's claw (2%), saw palmetto (2%). Natural source vitamin use was reported by 24% of users, and 6% reporting using herbal teas. 51% of users used 2 or more herbal products and 8% used 5 or more products. 19% of herbal users also used a conventional prescription drug to manage the same health problem as the herbal product. The reported range of monthly expenditures for these products varied from a few cents (grew their own) to $288 (CAN). Thirty-five percent of users did not know the price of at least one of their natural products. Of the 75% of respondents willing to disclose their annual household income ($CAN), 20 had an income of $46,000. The widespread use and potential for significant expenditure of limited resources would suggest that more study is required into the efficacy, safety and value of these products.

The use of natural health products (NHP) by Ontario seniors

A random dialing telephone survey in 4 Ontario communities obtained data on the use of natural health products (NHP) from 1,071 persons 60 years and older. 553 (52%) respondents were users of NHP. Prevalence of use was similar for females (53%) and males (48%). In this population modal users were of European descent, high school graduates and employed at least part-time. Half the users received recommendations about NHP from friends or relatives; another 22% learned about NHP through self-experimentation. Most users (81 %) decided by themselves whether they would buy an NHP rather than rely on input from another source (herbalist, physician, store owner/employee). 38% of NHP users had not informed their physician that they were using an NHP. When users had discussed NHP with their physician, less than 5% of physicians responded negatively. Some users felt natural health products were safer (15%) and less expensive (4%) than prescription drugs. 30% used NHP as a last resort for the treatment of a chronic disease. Nearly half (49%) of the users believed that if the government pays for prescription drugs, it should also pay for herbal remedies; 36% said the consumer should pay. In light of the extensive use of NHP by seniors, there is a need for clinical pharmacology studies of these products.

Communicating the benefits of wholegrain and functional grain products to European consumers

In order to increase the consumption of wholegrain products or grain products with functional properties, it is important to understand consumer beliefs about such products and the impact of health claims. In a series of consumer studies several differences were found between countries. While consumers in Finland, Italy and the UK saw wholegrain products as having positive attributes, those in Finland had more negative beliefs about refined grain products. Health claims and wholegrain labels increased perceived healthiness but had a less positive impact on likelihood of buying, and in Italy both health claims and wholegrain labels even decreased the likelihood of buying.