Seawater carbonate chemistry and calcification during tropical reef studies at Moorea (French Polynesia), 1997

Community metabolism and air-sea carbon dioxide (CO2) fluxes were investigated in July 1992 on a fringing reef at Moorea (French Polynesia). The benthic community was dominated by macroalgae (85% substratum cover) and comprised of Phaeophyceae Padina tenuis (Bory), Turbinaria ornata (Turner) J. Agardh, and Hydroclathrus clathratus Bory (Howe); Chlorophyta Halimeda incrassata f. ovata J. Agardh (Howe); and Ventricaria ventricosa J. Agardh (Olsen et West), as well as several Rhodophyta (Actinotrichia fragilis Forskál (Børgesen) and several species of encrusting coralline algae). Algal biomass was 171 g dry weight/m**2. Community gross production (Pg), respiration (R), and net calcification (G) were measured in an open-top enclosure. Pg and R were respectively 248 and 240 mmol Co2/m**2/d, and there was a slight net dissolution of CaCO3 (0.8 mmol/m**2/d). This site was a sink for atmospheric CO2 (10 ± 4 mmol CO2/m**2/d), and the analysis of data from the literature suggests that this is a general feature of algal-dominated reefs. Measurement of air-sea CO2 fluxes in open water close to the enclosure demonstrated that changes in small-scale hydrodynamics can lead to misleading conclusions. Net CO2 evasion to the atmosphere was measured on the fringing reef due to changes in the current pattern that drove water from the barrier reef (a C02 source) to the study site.

Seawater carbonate chemistry and calcification during a study of barrier reef flat in Moorea, French Polynesia, 1998

The relative contribution of soft bottoms to the community metabolism (primary production, respiration and net calcification) of a barrier reef flat has been investigated at Moorea (French Polynesia). Community metabolism of the sedimentary area was estimated using in situ incubations in perspex chambers, and compared with estimates of community metabolism of the whole reef flat obtained using a Lagrangian technique (Gattuso et al., 1996. Carbon flux in coral reefs. 1. Lagrangian measurement of community metabolism and resulting air-sea CO2 disequilibrium. Mar. Ecol. Prog. Ser. 145, 109-121). Net organic carbon production (E), respiration (R) and net calcification (G) of sediments were measured by seven incubations performed in triplicate at different irradiance. Respiration and environmental parameters were also measured at four randomly selected additional stations. A model of Photosynthesis-irradiance allowed to calculate oxygen (O2), organic carbon (CO2) and calcium carbonate (CaCO3) evolution from surface irradiance during a diel cycle. As chlorophyll a content of the sediment was not significantly different between stations, primary production of the sediment was considered as homogeneous for the whole lagoon. Thus, carbon production at the test station can be modelled from surface light irradiance. The modelled respiration was two times higher at the test station than the mean respiration of the barrier reef, and thus underestimated sediment contribution to excess production. Sediments cover 40-60% of the surface and accounted for 2.8-4.1% of organic carbon excess production estimated with the modelled R and 21-32% when mean R value was considered. The sedimentary CaCO3 budget was a very minor component of the whole reef budget.

In Situ effects of low pH and elevated HCO3 on juvenile massive Porites spp. in Moorea, French Polynesia

Juvenile colonies of massive Porites spp. were exposed to manipulated pH and bicarbonate ([HCO3-]) in situ to test the hypothesis that ocean acidification (OA) does not affect respiration and calcification. Incubations lasted 28 h and exposed corals to ambient temperature and light with ecologically relevant water motion. Three treatments were applied: (1) ambient conditions of pH 8.04 and 1751 µmol HCO3- kg(-1) (Treatment 1), (2) pCO2-induced ocean acidification of pH 7.73 and 2011 µmol HCO3- kg(-1) (Treatment 2), and (3) pCO2 and HCO3--enriched seawater of pH 7.69 and 2730 µmol HCO3- kg(-1) (Treatment 3). The third treatment providing elevated [HCO3-] was used to test for stimulatory effects of dissolved inorganic carbon on calcification under low pH and low saturation of aragonite (Omega arag), but it does not reflect conditions expected to occur under CO2-driven OA. Calcification of juvenile massive Porites spp. was affected by treatments, with an 81% elevation in Treatment 3 versus Treatment 1, but no difference between Treatments 1 and 2; respiration and the metabolic expenditure concurrent with calcification remained unaffected. These findings indicate that juvenile massive Porites spp. are resistant to short exposures to OA in situ, and separately, that they can increase calcification at low pH and low Omega arag if [HCO3-] is elevated. Juvenile Porites spp. may therefore be limited by dissolved inorganic carbon under ambient pCO2 conditions

An overview of the ciao multiparadigm language and program development environment and its design philosophy

We describe some of the novel aspects and motivations behind the design and implementation of the Ciao multiparadigm programming system. An important aspect of Ciao is that it provides the programmer with a large number of useful features from different programming paradigms and styles, and that the use of each of these features can be turned on and off at will for each program module. Thus, a given module may be using e.g. higher order functions and constraints, while another module may be using objects, predicates, and concurrency. Furthermore, the language is designed to be extensible in a simple and modular way. Another important aspect of Ciao is its programming environment, which provides a powerful preprocessor (with an associated assertion language) capable of statically finding non-trivial bugs, verifying that programs comply with specifications, and performing many types of program optimizations. Such optimizations produce code that is highly competitive with other dynamic languages or, when the highest levéis of optimization are used, even that of static languages, all while retaining the interactive development environment of a dynamic language. The environment also includes a powerful auto-documenter. The paper provides an informal overview of the language and program development environment. It aims at illustrating the design philosophy rather than at being exhaustive, which would be impossible in the format of a paper, pointing instead to the existing literature on the system.

An overview of ciao and its design philosophy

We provide an overall description of the Ciao multiparadigm programming system emphasizing some of the novel aspects and motivations behind its design and implementation. An important aspect of Ciao is that, in addition to supporting logic programming (and, in particular, Prolog), it provides the programmer with a large number of useful features from different programming paradigms and styles and that the use of each of these features (including those of Prolog) can be turned on and off at will for each program module. Thus, a given module may be using, e.g., higher order functions and constraints, while another module may be using assignment, predicates, Prolog meta-programming, and concurrency. Furthermore, the language is designed to be extensible in a simple and modular way. Another important aspect of Ciao is its programming environment, which provides a powerful preprocessor (with an associated assertion language) capable of statically finding non-trivial bugs, verifying that programs comply with specifications, and performing many types of optimizations (including automatic parallelization). Such optimizations produce code that is highly competitive with other dynamic languages or, with the (experimental) optimizing compiler, even that of static languages, all while retaining the flexibility and interactive development of a dynamic language. This compilation architecture supports modularity and separate compilation throughout. The environment also includes a powerful autodocumenter and a unit testing framework, both closely integrated with the assertion system. The paper provides an informal overview of the language and program development environment. It aims at illustrating the design philosophy rather than at being exhaustive, which would be impossible in a single journal paper, pointing instead to previous Ciao literature.

Why Ciao? An overview of the ciao system's design philosophy

Our intention in this note is not to provide a listing of the many features of the Ciao system: this can be found in part for example in the brochures announcing upcoming versions, in the Ciao website, or in more feature-oriented descriptions such as. Instead in this document we would like to describe the objectives and reasoning followed in our design as well as the fundamental characteristics that in our opinion make Ciao quite unique and hopefully really useful to you as a Ciao user.

Proyectando entre ruinas : lógicas de intervención continua en la arquitectura contemporánea

Los cambios percibidos hacia finales del siglo XX y a principios del nuevo milenio, nos ha mostrado que la crisis cultural de la que somos participes refleja también una crisis de los modelos universales. Nuestra situación contemporánea, parece indicar que ya no es posible formular un sistema estético para atribuirle una vigencia universal e intemporal más allá de su estricta eficacia puntual. La referencia organizada, delimitada, invariable y específica que ofrecía cualquier emplazamiento, en tanto preexistencia, reflejaba una jerarquía del sistema formal basado en lo extensivo: la medida, las normas, el movimiento, el tiempo, la modulación, los códigos y las reglas. Sin embargo, actualmente, algunos aspectos que permanecían latentes sobre lo construido, emergen bajo connotaciones intensivas, transgrediendo la simple manifestación visual y expresiva, para centrase en las propiedades del comportamiento de la materia y la energía como determinantes de un proceso de adaptación en el entorno. A lo largo del todo el siglo XX, el desarrollo de la relación del proyecto sobre lo construido ha sido abordado, casi en exclusiva, entre acciones de preservación o intervención. Ambas perspectivas, manifestaban esfuerzos por articular un pensamiento que diera una consistencia teórica, como soporte para la producción de la acción aditiva. No obstante, en las últimas décadas de finales de siglo, la teoría arquitectónica terminó por incluir pensamientos de otros campos que parecen contaminar la visión sesgada que nos refería lo construido. Todo este entramado conceptual previo, aglomeraba valiosos intentos por dar contenido a una teoría que pudiese ser entendida desde una sola posición argumental. Es así, que en 1979 Ignasi Solá-Morales integró todas las imprecisiones que referían una actuación sobre una arquitectura existente, bajo el termino de “intervención”, el cual fue argumentado en dos sentidos: El primero referido a cualquier tipo de actuación que se puede hacer en un edificio, desde la defensa, preservación, conservación, reutilización, y demás acciones. Se trata de un ámbito donde permanece latente el sentido de intensidad, como factor común de entendimiento de una misma acción. En segundo lugar, más restringido, la idea de intervención se erige como el acto crítico a las ideas anteriores. Ambos representan en definitiva, formas de interpretación de un nuevo discurso. “Una intervención, es tanto como intentar que el edificio vuelva a decir algo o lo diga en una determinada dirección”. A mediados de 1985, motivado por la corriente de revisión historiográfica y la preocupación del deterioro de los centros históricos que recorría toda Europa, Solá-Morales se propone reflexionar sobre “la relación” entre una intervención de nueva arquitectura y la arquitectura previamente existente. Relación condicionada estrictamente bajo consideraciones lingüísticas, a su entender, en sintonía con toda la producción arquitectónica de todo el siglo XX. Del Contraste a la Analogía, resumirá las transformaciones en la concepción discursiva de la intervención arquitectónica, como un fenómeno cambiante en función de los valores culturales, pero a su vez, mostrando una clara tendencia dialógica entres dos categorías formales: El Contraste, enfatizando las posibilidades de la novedad y la diferencia; y por otro lado la emergente Analogía, como una nueva sensibilidad de interpretación del edificio antiguo, donde la semejanza y la diversidad se manifiestan simultáneamente. El aporte reflexivo de los escritos de Solá-Morales podría ser definitivo, si en las últimas décadas antes del fin de siglo, no se hubiesen percibido ciertos cambios sobre la continuidad de la expresión lingüística que fomentaba la arquitectura, hacia una especie de hipertrofia figurativa. Entre muchos argumentos: La disolución de la consistencia compositiva y el estilo unitario, la incorporación volumétrica del proyecto como dispositivo reactivo, y el cambio de visión desde lo retrospectivo hacia lo prospectivo que sugiere la nueva conservación. En este contexto de desintegración, el proyecto, en tanto incorporación o añadido sobre un edificio construido, deja de ser considerado como un apéndice volumétrico subordinado por la reglas compositivas y formales de lo antiguo, para ser considerado como un organismo de orden reactivo, que produce en el soporte existente una alteración en su conformación estructural y sistémica. La extensión, antes espacial, se considera ahora una extensión sensorial y morfológica con la implementación de la tecnología y la hiper-información, pero a su vez, marcados por una fuerte tendencia de optimización energética en su rol operativo, ante el surgimiento del factor ecológico en la producción contemporánea. En una sociedad, como la nuestra, que se está modernizando intensamente, es difícil compartir una adecuada sintonía con las formas del pasado. Desde 1790, fecha de la primera convención francesa para la conservación de monumentos, la escala de lo que se pretende preservar es cada vez más ambiciosa, tanto es así, que al día de hoy el repertorio de lo que se conserva incluye prácticamente todas las tipologías del entorno construido. Para Koolhaas, el intervalo entre el objeto y el momento en el cual se decide su conservación se ha reducido, desde dos milenios en 1882 a unas décadas hoy en día. En breve este lapso desaparecerá, demostrando un cambio radical desde lo retrospectivo hacia lo prospectivo, es decir, que dentro de poco habrá que decidir que es lo que se conserva antes de construir. Solá-Morales, en su momento, distinguió la relación entre lo nuevo y lo antiguo, entre el contraste y la analogía. Hoy casi tres décadas después, el objetivo consiste en evaluar si el modelo de intervención arquitectónica sobre lo construido se ha mantenido desde entonces o si han aparecido nuevas formas de posicionamiento del proyecto sobre lo construido. Nuestro trabajo pretende demostrar el cambio de enfoque proyectual con la preexistencia y que éste tiene estrecha relación con la incorporación de nuevos conceptos, técnicas, herramientas y necesidades que imprimen el contexto cultural, producido por el cambio de siglo. Esta suposición nos orienta a establecer un paralelismo arquitectónico entre los modos de relación en que se manifiesta lo nuevo, entre una posición comúnmente asumida (Tópica), genérica y ortodoxa, fundamentada en lo visual y expresivo de las últimas décadas del siglo XX, y una realidad emergente (Heterotópica), extraordinaria y heterodoxa que estimula lo inmaterial y que parece emerger con creciente intensidad en el siglo XXI. Si a lo largo de todo el siglo XX, el proyecto de intervención arquitectónico, se debatía entre la continuidad y discontinuidad de las categorías formales marcadas por la expresión del edificio preexistente, la nueva intervención contemporánea, como dispositivo reactivo en el paisaje y en el territorio, demanda una absoluta continuidad, ya no visual, expresiva, ni funcional, sino una continuidad fisiológica de adaptación y cambio con la propia dinámica del territorio, bajo nuevas reglas de juego y desplegando planes y estrategias operativas (proyectivas) desde su propia lógica y contingencia. El objeto de esta investigación es determinar los nuevos modos de continuidad y las posibles lógicas de producción que se manifiestan dentro de la Intervención Arquitectónica, intentando superar lo aparente de su relación física y visual, como resultado de la incorporación del factor operativo desplegado por el nuevo dispositivo contemporáneo. Creemos que es acertado mantener la senda connotativa que marca la denominación intervención arquitectónica, por aglutinar conceptos y acercamientos teóricos previos que han ido evolucionando en el tiempo. Si bien el término adolece de mayor alcance operativo desde su formulación, una cualidad que infieren nuestras lógicas contemporáneas, podría ser la reformulación y consolidación de un concepto de intervención más idóneo con nuestros tiempos, anteponiendo un procedimiento lógico desde su propia necesidad y contingencia. Finalmente, nuestro planteamiento inicial aspira a constituir un nueva forma de reflexión que nos permita comprender las complejas implicaciones que infiere la nueva arquitectura sobre la preexistencia, motivada por las incorporación de factores externos al simple juicio formal y expresivo preponderante a finales del siglo XX. Del mismo modo, nuestro camino propuesto, como alternativa, permite proyectar posibles sendas de prospección, al considerar lo preexistente como un ámbito que abarca la totalidad del territorio con dinámicas emergentes de cambio, y con ellas, sus lógicas de intervención.Abstract The perceived changes towards the end of the XXth century and at the beginning of the new milennium have shown us that the cultural crisis in which we participate also reflects a crisis of the universal models. The difference between our contemporary situation and the typical situations of modern orthodoxy and post-modernistic fragmentation, seems to indicate that it is no longer possible to formulate a valid esthetic system, to assign a universal and eternal validity to it beyond its strictly punctual effectiveness; which is even subject to questioning because of the continuous transformations that take place in time and in the sensibility of the subject itself every time it takes over the place. The organised reference that any location offered, limited, invariable and specific, while pre-existing, reflected a hierarchy of the formal system based on the applicable: measure, standards, movement, time, modulation, codes and rules. Authors like Marshall Mc Luhan, Paul Virilio, or Marc Augé anticipated a reality where the conventional system already did not seem to respond to the new architectural requests in which information, speed, disappearance and the virtual had blurred the traditional limits of place; pre-existence did no longer possess a specific delimitation and, on the contrary, they expect to reach a global scale. Currently, some aspects that stayed latent relating to the constructed, surface from intensive connotations, transgressing the simple visual and expressive manifestation in order to focus on the traits of the behaviour of material and energy as determinants of a process of adaptation to the surroundings. Throughout the entire Century, the development of the relation of the project relating to the constructed has been addressed, almost exclusively, in preservational or interventianal actions. Both perspectives showed efforts in order to express a thought that would give a theoretical consistency as a base for the production of the additive action. Nevertheless, the last decades of the Century, architectural theory ended up including thoughts from other fields that seem to contaminate the biased vision 15 which the constructed related us. Ecology, planning, philosophy, global economy, etc, suggest new approaches to the construction of the contemporary city; but this time with a determined idea of change and continuous transformation, that enriches the panorama of thought and architectural practice, at the same time, according to some, it puts disciplinary specification at risk, given that there is no architecture without destruction, the constructed organism requires mutation in order to adjust to the change of shape. All of this previous conceptual framework gathered valuable intents to give importance to a theory that could be understood solely from an argumental position. Thusly, in 1979 Ignasi Solá-Morales integrated all of the imprecisions that referred to an action in existing architecture under the term of “Intervention”, which was explained in two ways: The first referring to any type of intervention that can be carried out in a building, regarding protection, conservation, reuse, etc. It is about a scope where the meaning of intensity stays latent as a common factor of the understanding of a single action. Secondly, more limitedly, the idea of intervention is established as the critical act to the other previous ideas such as restauration, conservation, reuse, etc. Both ultimately represent ways of interpretation of a new speech. “An intervention, is as much as trying to make the building say something again or that it be said in a certain direction”. Mid 1985, motivated by the current of historiographical revision and the concerns regarding the deterioration of historical centres that traversed Europe, Solá-Morales decides to reflect on “the relationship” between an intervention of the new architecture and the previously existing architecture. A relationship determined strictly by linguistic considerations, to his understanding, in harmony with all of the architectural production of the XXth century. From Contrast to Analogy would summarise transformations in the discursive perception of architectural intervention, as a changing phenomenon depending on cultural values, but at the same time, showing a clear dialogical tendency between two formal categories: Contrast, emphasising the possibilities of novelty and difference; and on the other hand the emerging Analogy, as a new awareness of interpretation of the ancient building, where the similarity and diversity are manifested simultaneously. For Solá-Morales the analogical procedure is not based on the visible simultaneity of formal orders, but on associations that the subject establishes throughout time. Through analogy it is tried to overcome the simple visual relationship with the antique, to focus on its spacial, physical and geographical nature. If the analogical attempt guides an opening towards a new continuity; it still persists in the connection of dimensional, typological and figurative factors, subordinate to the formal hierarchy of the preexisting subjects. 16 The reflexive contribution of Solá-Morales’ works could be final, if in the last decades before the end of the century there had not been certain changes regarding linguistic expression, encouraged by architecture, towards a kind of figurative hypertrophy, amongst many arguments we are in this case interested in three moments: The dissolution of the compositional consistency and the united style, the volumetric incorporation of the project as a reactive mechanism, and the change of the vision from retrospective towards prospective that the new conservation suggests. The recurrence to the history of architecture and its recognisable forms, as a way of perpetuating memory and establishing a reference, dissolved any instinct of compositive unity and style, provoking permanent relationships to tend to disappear. The composition and coherence lead to suppose a type of discontinuity of isolated objects in which only possible relationships could appear; no longer as an order of certain formal and compositive rules, but as a special way of setting elements in a specific work. The new globalised field required new forms of consistency between the project and the pre-existent subject, motivated amongst others by the higher pace of market evolution, increase of consumer tax and the level of information and competence between different locations; aspects which finally made stylistic consistence inefficient. In this context of disintegration, the project, in incorporation as well as added to a constructed building, stops being considered as a volumetric appendix subordinate to compositive and formal rules of old, to be considered as an organism of reactive order, that causes a change in the structural and systematic configuration of the existing foundation. The extension, previsouly spatial, is now considered a sensorial and morphological extension, with the implementation of technology and hyper-information, but at the same time, marked by a strong tendency of energetic optimization in its operational role, facing the emergence of the ecological factor in contemporary production. The technological world turns into a new nature, a nature that should be analysed from ecological terms; in other words, as an event of transition in the continuous redistribution of energy. In this area, effectiveness is not only determined by the capacity of adaptation to changing conditions, but also by its transforming capacity “expressly” in order to change an environment. In a society, like ours, that is modernising intensively, it is difficult to share an adecuate agreement with the forms of the past. From 1790, the date of the first French convention for the conservation of monuments, the scale of what is expexted to be preserved is more and more ambitious, so much so that nowadays the repertoire of that what is conserved includes practically all typologies of the constructed surroundings. For Koolhaas, the ínterval between the object and the moment when its conservation is decided has been reduced, from two 17 milennia in 1882 to a few decades nowadays. Shortly this lapse will disappear, showing a radical change of retrospective towards prospective, that is to say, that soon it will be necessary to decide what to conserve before constructing. The shapes of cities are the result of the continuous incorporation of architecture, and perhaps that only through architecture the response to the universe can be understood, the continuity of what has already been constructed. Our work is understood also within that system, modifying the field of action and leaving the road ready for the next movement of those that will follow after us. Continuity does not mean conservatism, continuity means being conscient of the transitory value of our answers to specific needs, accepting the change that we have received. That what has been constructed to remain and last, should cause future interventions to be integrated in it. It is necessary to accept continuity as a rule. Solá-Morales, in his time, distinguished between the relationship with new and old, between contrast and analogy. Today, almost three decades later, the objective consists of evaluating whether the model of architectural intervention in the constructed has been maintained since then or if new ways of positioning the project regarding the constructed have appeared. Our work claims to show the change of the approach of projects with pre-existing subjects and that this has got a close relation to the incorporation of new concepts, techniques, tools and necessities that impress the cultural context, caused by the change of centuries. This assumption guides us to establish a parallelism between the forms of connection where that what is new is manifested between a commonly assumed (topical), generic and orthodox position, based on that what is visual and expressive in the last decades of the XXth century, and an emerging (heterotopical), extraordinary and heterodox reality that stimulates the immaterial and that seems to emerge with growing intensity in the XXIst century. If throughout the XXth century the project of architectural intervention was considered from the continuity and discontinuity of formal categories, marked by the expression of the pre-existing building, the new contemporary intervention, as a reactive device in the landscape and territory, demands an absolute continuity. No longer a visual, expressive or functional one but a morphological continuity of adaptation and change with its own territorial dynamics, under new game rules and unfolding new operative (projective) strategies from its own logic and contingency. 18 The aim of this research is to determine new forms of continuity and the possible logic of production that are expressed in the Architectural Intervention, trying to overcome the obviousness of its physical and visual relationship, at the beginning of this new century, as a result of the incorporation of the operative factor that the new architectural device unfolds. We think it is correct to maintain the connotative path that marks the name architectural intervention by bringing previous concepts and theorical approaches that have been evolving through time together. If the name suffers from a wider operational range because of its formulation, a quality that our contemporary logic provokes, the reformulation and consolidation of an interventional concept could be more suitable for our times, giving preference to a logical method from its own necessity and contingency. It seems that now time shapes the topics, it is no longer about materialising a certain time but about expressing the changes that its new temporality generates. Finally, our initial approach aspires to form a new way of reflection that permits us to understand the complex implications that the new architecture submits the pre-existing subject to, motivated by the incorporation of factors external to simple formal and expressive judgement, prevailing at the end of the XXth century. In the same way, our set road, as an alternative, permits the contemplation of possible research paths, considering that what is pre-existing as an area that spans the whole territory with emerging changing dynamics and, with them, their interventional logics.

The theory of electrostatic probes in strong magnetic fields : Thesis submitted to the Faculty of The Graduate School of the University of Colorado for the Degree Doctor of Philosophy Department of Aerospace Engineering Science

A theory is developed of an electrostatic probe in a fully-ionized plasma in the presence of a strong magnetic field. The ratio of electron Larmor radius to probe transverse dimension is assumed to be small. Poisson's equation, together with kinetic equations for ions and electrons are considered. An asymptotic perturbation method of multiple scales is used by considering the characteristic lengths appearing in the problem. The leading behavior of the solution is found. The results obtained appear to apply to weaker fields also, agreeing with the solutions known in the limit of no magnetic field. The range of potentials for wich results are presented is limited. The basic effects produced by the field are a depletion of the plasma near the probe and a non-monotonic potential surrounding the probe. The ion saturation current is not changed but changes appear in both the floating potential Vf and the slope of the current-voltage diagram at Vf. The transition region extends beyond the space potential Vs,at wich point the current is largely reduced. The diagram does not have an exponential form in this region as commonly assumed. There exists saturation in electron collection. The extent to which the plasma is disturbed is determined. A cylindrical probe has no solution because of a logarithmic singularity at infinity. Extensions of the theory are considered.

High-speed trains and tourists: what is the link? Evidence from the French and Spanish capitals

The objective of this paper is to analyse the factors influencing tourists? choice of a destination and the role of High Speed Rail (HSR) systems in this choice. The methodology proposed consists in analysing two capitals in Europe, i.e. Paris and Madrid where HSR services are important, to investigate the factors influencing holidaymakers in choosing these cities, and the role of HSR in this choice. The main outcome of this paper is to show that several factors influence the choice of a tourist, like the presence of architectural sites, the quality of promotion of the destination itself, the presence of events, and also HSR services. However we found that the HSR system has affected the choice of Paris and Madrid in a different way. Concerning the French case study, HSR is considered a real transport mode alternative among tourists, therefore HSR is chosen to reach Paris as well as for revisiting it. On the other hand, Madrid is chosen by tourists irrespective on the presence of HSR, while HSR is chosen for reaching cities close to Madrid. Data collected from the two surveys have been used for a further quantitative analysis. Models have been specified and calibrated to identify the factors influencing holidaymakers to revisit Paris and Madrid and the role of HSR in this choice has been highlighted.

Trans arquitectura : imaginación, invención e individuación del objeto técnico arquitectónico : transferencia tecnológica desde la industria del transporte al proyecto arquitectónico (1900-1973)

Se presenta la tesis doctoral, titulada ‘TRANS Arquitectura. Imaginación, Invención e individuación del objeto tecnico arquitectónico. Transferencia tecnológica desde la Industria del Transporte al Proyecto de Arquitectura [1900-1973]'’, que aborda la relación entre la Arquitectura y el Objeto Técnico durante la Modernidad.1 La temática de la tesis gravita en torno a la cultura técnica, la cultura material y la historia de la Tecnología del siglo XX. Hipótesis Se sostiene aquí la existencia de unas arquitecturas que se definen como Objetos Técnicos. Para demostrarlo se estudia si éstas comparten las mismas propiedades ontológicas de los objetos técnicos. Industria y Arquitectura La historia de la Arquitectura Moderna es la historia de la Industria Moderna y sus instalaciones industriales, sus productos y artefactos o sus procedimientos y procesos productivos. Fábricas, talleres, acerías, astilleros, minas, refinerías, laboratorios, automóviles, veleros, aviones, dirigibles, transbordadores, estaciones espaciales, electrodomésticos, ordenadores personales, teléfonos móviles, motores, baterías, turbinas, aparejos, cascos, chassis, carrocerías, fuselajes, composites, materiales sintéticos, la cadena de montaje, la fabricación modular, la cadena de suministros, la ingeniería de procesos, la obsolescencia programada… Todos estos objetos técnicos evolucionan constantemente gracias al inconformismo de la imaginación humana, y como intermediarios que son, cambian nuestra manera de relacionarnos con el mundo. La Arquitectura, al igual que otros objetos técnicos, media entre el hombre y el mundo. Con el objetivo de reducir el ámbito tan vasto de la investigación, éste se ha filtrado a partir de varios parámetros y cualidades de la Industria, estableciendo un marco temporal, vinculado con un determinado modo de hacer, basado en la ciencia. El inicio del desarrollo industrial basado en el conocimiento científico se da desde la Segunda Revolución Industrial, por consenso en el último tercio del siglo XIX. Este marco centra el foco de la tesis en el proceso de industrialización experimentado por la Arquitectura desde entonces, y durante aproximadamente un siglo, recorriendo la Modernidad durante los 75 primeros años del siglo XX. Durante este tiempo, los arquitectos han realizado transferencias de imágenes, técnicas, procesos y materiales desde la Industria, que ha servido como fuente de conocimiento para la Arquitectura, y ha evolucionado como disciplina. Para poder abordar más razonablemente un periodo tan amplio, se ha elegido el sector industrial del transporte, que históricamente ha sido, no sólo fuente de inspiración para los Arquitectos, sino también fuente de transferencia tecnológica para la Arquitectura. Conjuntos técnicos como los astilleros, fábricas de automóviles o hangares de aviones, individuos técnicos como barcos, coches o aviones, y elementos técnicos como las estructuras que les dan forma y soporte, son todos ellos objetos técnicos que comparten propiedades con las arquitecturas que aquí se presentan. La puesta en marcha de la cadena móvil de montaje en 1913, se toma instrumentalmente como primer foco temporal desde el que relatar la evolución de numerosos objetos técnicos en la Primera Era de la Máquina; un segundo foco se sitúa en 19582, año de la creación de la Agencia Espacial norteamericana (NASA), que sirve de referencia para situar la Segunda Era de la Máquina. La mayoría de los objetos técnicos arquitectónicos utilizados para probar la hipótesis planteada, gravitan en torno a estas fechas, con un rango de más menos 25 años, con una clara intención de sincronizar el tiempo de la acción y el tiempo del pensamiento. Arquitectura y objeto técnico Los objetos técnicos han estado siempre relacionados con la Arquitectura. En el pasado, el mismo técnico que proyectaba y supervisaba una estructura, se ocupaba de inventar los ingenios y máquinas para llevarlas a cabo. Los maestros de obra, eran verdaderos ‘agentes de transferencia tecnológica’ de la Industria y su conocimiento relacionaba técnicas de fabricación de diferentes objetos técnicos. Brunelleschi inventó varia grúas para construir la cúpula de Santa Maria dei Fiori (ca.1461), seguramente inspirado por la reedición del tratado de Vitruvio, De Architectura (15 A.C.), cuyo último capítulo estaba dedicado a las máquinas de la arquitectura clásica romana, y citaba a inventores como Archimedes. El arquitecto florentino fue el primero en patentar un invento en 1421: una embarcación anfibia que serviría para transportar mármol de Carrara por el río Arno, para su obra en Florencia. J. Paxton. Crystal Palace. London 1851. Viga-columna. Robert McCormick. Cosechadora 1831. 2ª patente, 1845. La Segunda Revolución Industrial nos dejó un primitivo ejemplo moderno de la relación entre la Arquitectura y el objeto técnico. El mayor edificio industrializado hasta la fecha, el Crystal Palace de Londres, obra de Joseph Paxton, fue montado en Londres con motivo de la Gran Exposición sobre la Industria Mundial de 1851, y siempre estará asociado a la cosechadora McCormick, merecedora del Gran Premio del Jurado. De ambos objetos técnicos, podrían destacarse características similares, como su origen industrial, y ser el complejo resultado de un ensamblaje simple de elementos técnicos. Desde la entonces, el desarrollo tecnológico ha experimentado una aceleración continuada, dando lugar a una creciente especialización y separación del conocimiento sobre las técnicas antes naturalmente unidas. Este proceso se ha dado a expensas del conocimiento integrador y en detrimento de la promiscuidad entre la Industria y la Arquitectura. Este es, sin lugar a dudas, un signo consustancial a nuestro tiempo, que provoca un natural interés de los arquitectos y otros tecnólogos, por las transferencias, trans e inter-disciplinareidades que tratan de re-establecer los canales de relación entre los diferentes campos del conocimiento. La emergencia de objetos técnicos como los vehículos modernos a principios del siglo XX (el automóvil, el trasatlántico, el dirigible o el aeroplano) está relacionada directamente con la Arquitectura de la Primera Era de la Máquina. La fascinación de los arquitectos modernos por aquellas nuevas estructuras habitables, se ha mantenido durante más de un siglo, con diferente intensidad y prestando atención a unos objetos técnicos u otros, oscilando entre el dominio del valor simbólico de los vehículos como objetosimágenes, durante el periodo heroico de la Primera Era de la Máquina, y la mirada más inquisitiva durante la Segunda, que perseguía un conocimiento más profundo de la organización de los mismos y del sistema técnico en el que estaban incluidos. La relación homóloga que existe entre arquitecturas y vehículos, por su condición de estructuras habitables, es algo de sobra conocido desde que Le Corbusier utilizara aquellas imágenes de barcos, coches y aviones para ilustrar su manifiesto Vers une architecture, de 1923. Los vehículos modernos han sido los medios con los que transmitir los conceptos que ansiaban transformar las propiedades tradicionales de la Arquitectura, relativas a su factura, su habitabilidad, su duración, su funcionalidad o su estética. Destaca particularmente el caso del automóvil en las décadas de los años 30 y 50, y los vehículos del programa espacial en las décadas de los 60 y 70. El conocimiento y la documentación previa de estos hechos, fueron un buen indicio para identificar y confirmar que el sector industrial del transporte, era un especialmente trascendente y fértil proveedor de casos de transferencia tecnológica para la Arquitectura. La tradición Moderna inaugurada por Le Corbusier en los años 20, ha sido mantenida y defendida por una multitud de arquitectos modernos como Albert Frey, Richard Neutra, Ralph Soriano, Charles Eames o Craig Ellwood, cuyo trabajo, animado por el legado de anteriores tecnólogos como Bucky Fuller o Jean Prouvé, fue fundamental y referencia obligada para la siguiente generación de arquitectos como Cedric Price, Archigram, Norman Foster, Richard Rogers, Renzo Piano, Jean Kaplicky o Richard Horden, entre otros. Todos ellos han contribuido a engrosar el imaginario del objeto técnico, aportando sus obras arquitectónicas. Estos arquitectos que aparecen repetidamente en el discurrir de la tesis, pertenecen a un mismo linaje, y son agrupados según una estructura ‘genealógica’, que se ha denominado ‘Estirpe Técnica’. Unidos por intereses comunes y similares enfoques o actitudes ante el proyecto de arquitectura, entendida como objeto Técnico, han operado mediante la práctica de la transferencia tecnológica, sin limitarse a las técnicas compositivas propias de la disciplina arquitectónica. Durante la investigación, se ha recopilado una selección de menciones explícitas -hechas por arquitectos- sobre otros objetos técnicos para referirse a la Arquitectura, mostrando las constantes y las variaciones de sus intereses a lo largo del siglo, lo que nos ha llevado a conclusiones como por ejemplo, que los conjuntos técnicos (fábricas de zepelines, aviones, automóviles o trasatlánticos) eran tomados por los arquitectos de la primera Modernidad, como un modelo imaginario, formal y compositivo, mientras que los de la Segunda Era de la Máquina los tomaban como modelo espacial y organizativo para la arquitectura. La mencionada estirpe de tecnólogos incluye líneas de descendencia conocidas, como: EiffelSuchovBehrens GropiusMiesLeCorbusierLodsProuve, en la Europa continental, o una rama británica como: LoudonPaxtonWilliamsStirlingGowan SmithsonsPriceArchigramFosterRogersPiano KaplickyHorden. También podemos encontrar conexiones intercontinentales como Fuller EamesRudolphFosterRogers, o ramificaciones menos previsibles como: LeRicolaisKahn PianoKaplicky, o LeCorbusierFreyLacaton Vassal… Seguramente muchos más merecerían incluirse en esta lista, y de hecho, la tesis asume la imposibilidad de incluirlo todo (por motivos prácticos) aunque contempla la posibilidad de ser ampliada en un futuro. Con lo aquí incluido, se pretende mostrar la continuidad en los enfoques, planteamientos y técnicas de proyectos aplicadas, de los que podemos deducir algunas conclusiones, como por ejemplo, que en los periodos inmediatamente posteriores a las dos Guerras Mundiales, aumentó la intensidad de aportaciones de nuevas imágenes de vehículos, al imaginario del objeto técnico utilizado por los arquitectos, a través de publicaciones y exposiciones. Hoy, cien años después de que Ford pusiera en marcha la cadena móvil de montaje, aún encontramos viva esta tradición en las palabras de un arquitecto, Richard Horden, cuyo trabajo porta consigo –como la información embebida en los elementos técnicos- toda una cultura técnica de una tradición moderna. Horden representa uno de los exponentes de la que he denominado estirpe de tecnólogos. Es por ello que he querido concluir la tesis con una entrevista, realizada en Mayo de 2015, en su estudio de Berkeley Square en Londres (ver Apéndices). Guías Para el desarrollo de la presente tesis, se ha tomado, como principal obra de referencia, otra tesis, titulada El modo de existencia de los objetos técnicos, leída y publicada en 1958 por el filósofo francés Gilbert Simondon [1924-89], dedicada a la ontología del objeto técnico. Esta obra enmarca el enfoque intelectual de la tesis, que entronca con la fenomenología, para movilizar una visión particular de la Arquitectura, a la que sirve como modelo de análisis ontológico para estudiar sus procesos de génesis, invención e individuación. Para el desarrollo de éstos, se ha utilizado como complemento bibliográfico, otra obra del mismo autor, titulada Imaginación e invención 1965-66. En cuanto a las fuentes historiográficas disciplinares, se ha elegido utilizar a Reyner P. Banham [1922-1988] y a Martin E. Pawley [1938-2008] como guías a través de la arquitectura del siglo XX. Sus crónicas sobre la Primera y Segunda Era de la Máquina3 y su obra crítica, han servido como índices desde los que reconstruir el imaginario del objeto técnico moderno, y del que aprovisionarse de proyectos y obras de Arquitectura como casos de estudio para la tesis. Estas obras han servido además como índices de otra bibliografía, que ha sido complementaria a la de éstos. Objetivos de la Tesis El principal objetivo de la tesis es demostrar la hipótesis: si una obra de arquitectura puede ser considerada un objeto técnico y bajo qué condiciones, construyendo un criterio que permita reconocer cuándo una obra de Arquitectura responde a la definición de objeto técnico. Otro objetivo es demostrar la importancia y potencia de la Transferencia tecnológica en el proceso evolutivo de la Arquitectura, y para ello se presentan ejemplos de una metodología de proyecto por ensamblaje, que Martin Pawley denominaba ‘Design by Assembly’. También es un objetivo el de reconstruir un Atlas del Imaginario del objeto técnico moderno, con el fin de conocer mejor las causas, razones y finalidades que llevaron a los arquitectos modernos a perseguir una arquitectura como objeto técnico. Este Atlas permite relacionar panópticamente los distintos objetos técnicos entre sí, revelando la verdadera importancia y trascendencia de aquéllos y las arquitecturas con las que se relacionan. En él, las arquitecturas vuelven a situarse en el contexto más extenso y complejo de la industria y la historia de la tecnología, al que siempre pertenecieron. De este modo, éstas son capaces de desvelar todo el conocimiento -en forma de información- que portan en su propio código ‘genético’, desplegando capítulos completos de cultura tecnológica, tan antigua como la Humanidad y en constante y creciente evolución. Estructura de la tesis Tras una Introducción en la que se presentan algunos de los conceptos principales que se instrumentalizan en la tesis sobre la ontología Simondoniana del objeto técnico y sobre la transferencia tecnológica aplicada al proyecto de Arquitectura, el texto principal de la tesis consta de tres partes: La primera se dedica a la Imaginación, una segunda parte a la Invención y una tercera a Individuación o evolución del objeto técnico. Se termina con una Discusión de la tesis y un apartado de Conclusiones. En la Introducción al objeto técnico, éste se define ontológicamente y se distinguen sus diferentes categorías (conjuntos técnicos, individuos técnicos y elementos técnicos). Se explica el proceso de génesis del objeto técnico y sus fases de imaginación, invención e individuación. También se presentan los conceptos de transducción, tecnicidad y sistema técnico, fundamentales para entender el concepto de transferencia tecnológica que se desarrollará después. La concretización, explica el modo particular de individuación y evolución de los objetos técnicos, un proceso por el que las diferentes partes de un objeto técnico, se integran y tienden hacia la propia convergencia. Aquí se comprueba la efectividad del concepto simondoniano de Transducción, como señal o información transmitida y transformada, y se relaciona con la Transferencia Tecnológica - un proceso sinergético, por el que un sector industrial se beneficia del desarrollo de otro sector- a la que se han referido explícitamente arquitectos e historiadores para explicar sus obras, durante la Segunda Era de la Máquina, y que es determinante para el desarrollo de la Industria. La transferencia tecnológica sería la transmisión del conjunto de conocimientos sobre la técnica, que incluyen su esfera fáctica, pero también la esfera sensible de la experiencia. En su aplicación a la arquitectura, las transferencias se han clasificado según tres tipos: Eidéticas, Tectónicas, Orgánicas. En la primera parte dedicada a la Imaginación del objeto técnico arquitectónico se realiza una reconstrucción ‘arqueológica’ –y parcial- del imaginario del objeto técnico moderno, con la intención de conocer mejor su génesis y la relación con otros objetos técnicos. Las fuentes de ese imaginario se buscan en las instalaciones de la Industria de principios de siglo XX, en particular en las fábricas de vehículos, con la finalidad de comprobar hasta qué punto, esos objetos técnicos fueron importantes para imaginar la Arquitectura moderna. La reconstrucción se continúa hasta la Segunda Era de la Máquina, cuando una nueva mirada más inquisitiva y precisa, se dirige a otras fábricas, vehículos y componentes, interesándose por sus cualidades materiales y organizativas. Transferencias Eidéticas, que operan desde un conocimiento intuitivo y son útiles para transmitir información sobre la esencia de un objeto técnico que sirve de fuente. Conceptos abstractos se transmiten por medio de las imágenes—objeto, para producir una transformación en su equivalente arquitectónico. Fruto de la investigación, se han detectado un grupo de conceptos que han sido objeto de transferencias tecnológicas de naturaleza eidética, provenientes del imaginario del objeto técnico moderno: FABRICADO, HABITABLE, FUNCIONAL, EFICIENTE, OBSOLESCENTE y BELLO. En la segunda parte dedicada a la Invención del objeto técnico arquitectónico, las transferencias también pueden ser Tectónicas, cuando lo que se transmite es una técnica constructiva o estructural aplicada mediante MATERIALES artificiales (como los metales, los composites como el ferrocemento, y el plywood, o las aleaciones como el aluminio) o mediante el ensamblaje de ESTRUCTURAS o partes componentes de otro objeto técnico, (como cascos, fuselajes, carrocerías o aparejos) y tiene como resultado la invención de un nuevo objeto técnico arquitectónico. En la tercera parte dedicada a la individuación, se abordan las transferencias ORGÁNICAS, lo que se transfiere es una técnica organizativa, aplicada a través de PROCEDIMIENTOS que definen la actividad del arquitecto como tecnólogo e inventor de objetos técnicos. Estos procedimientos tienen un efecto transformador en tres instituciones tradicionales para la Arquitectura: la Escuela, el Estudio y la Obra, y sus resultados se resumen en nuevos modelos de organización de la Educación de la Arquitectura, con la aparición de los Talleres de proyectos; nuevos modelos de organización del ejercicio de arquitecto: la Oficina técnica; nuevos modelos de organización del espacio, basados en la organización espacial de la Industria, que da lugar a patrones o Matrices espaciales; un nuevo modelo de organización del proyecto, que utiliza las herramientas gráficas de la industria y el ensamblaje como metodología; y un nuevo modelo de producción arquitectónica, basado en la Industrialización. Tras explicar los conceptos y la génesis del ensamblaje y el montaje, se presenta el proyecto por ensamblaje (Design by assembly) como un método que promueve la invención arquitectónica. Se demuestra utilizando algunos casos analizados en la tesis, en los que se ha realizado alguna transferencia conceptual, constructiva u organizativa. Tras analizar las arquitecturas estudiadas en la tesis, se ha utilizado el método genético propuesto por Simondon para comprender cada evolución particular, reconstruyendo las líneas genealógicas hasta sus ancestros, e identificando una serie de linajes genéticos, que corresponderían con los conjuntos técnicos estudiados en la tesis: el astillero, la fábrica de coches, y la fábrica de aeronaves: los Ancestros de la Modernidad. Los sistemas de organización espacial de estos conjuntos técnicos, están directamente relacionados con el objeto técnico que se produce en él. A partir de ellos se definen una serie de matrices operativas (MILL, SHOP, SHED), que sirven para hacer una taxonomía del objeto técnico arquitectónico. Esto se ejemplifica con algunos proyectos de Norman Foster, Richard Rogers, Renzo Piano, Nicholas Grimshaw, Jean Kaplicky y Richard Horden. Tesis: Comprobación de la hipótesis Simondon definía ontológicamente el Objeto técnico como aquello de lo que existe génesis y que desarrolla una tendencia hacia la solidaridad y unidad. Para que una Arquitectura pueda ser reconocida como un Objeto técnico, se deben dar una serie de condiciones, en las sucesivas fases que intervienen en su modo de existencia: Imaginación. Estas arquitecturas remiten a un imaginario protagonizado por imágenes-objeto de otros objetos técnicos (conjuntos técnicos, individuos técnicos y elementos técnicos). Esas imágenes-objeto vehiculizan una transferencia eidética de los objetos técnicos que simbolizan. Invención. Estas arquitecturas son el resultado de transferencias tectónicas, que se producen durante el proceso de proyecto, mediante el ensamblaje de materiales, componentes o procedimientos, utilizados en la industria para la producción de otros objetos técnicos. Individuación. Estas arquitecturas evolucionan y se individualizan por concretización, un proceso por el que los objetos técnicos se organizan para seguir su tendencia hacia la integración de sus partes, con el fin de alcanzar la convergencia de funciones en una única estructura. Esta integración tiende hacia la naturalización del objeto técnico, mediante la inclusión simbiótica de sus medios naturales asociados. En este caso, veremos cómo se ha producido transferencias orgánicas, o lo que es lo mismo, cómo los objetos técnicos –en el nivel de los conjuntos técnicos- se han tomado como modelo de organización por la arquitectura. Tras comprobar que de ellas existe una génesis, que evoluciona por las fases de imaginación e invención y concretización, se analiza su imaginario, su materialidad, sus estructuras y su organización, con el fin de detectar patrones y principios organizativos comunes a otros objetos técnicos. Interés de la tesis Desde el comienzo del nuevo siglo, diversos autores han demostrado un renovado interés por definir qué es el proyecto, qué lo constituye para qué sirve. Las aproximaciones al tema provienen de la filosofía analítica (Galle, 2008) o de la filosofía de la tecnología (Verbeek, 2005; Vermaas, 2009) y a menudo versan sobre la relación entre diseño y la cultura material (Dorschel 2003, Boradkar 2010 o Preston 2012). Es importante indicar el reciente y también creciente interés suscitado por la obra del filósofo francés, Gilbert Simondon [1924-1989], reconocida por su importante contribución a la filosofía de la técnica y la fenomenología, y por la influencia en el pensamiento de filósofos como Gilles Deleuze, autor presente en multitud de tesis doctorales e investigaciones teóricas llevadas a cabo en las principales escuelas de Arquitectura de todo el mundo desde los años 90 hasta el presente. La reedición y traducción de la obra de Simondon (ing. 1980, esp. 2008) ha recibido la atención de filósofos actuales como Paolo Virno, Bruno Latour o Bernard Stiegler, que siguen recurriendo a su estudio y análisis para avanzar en su pensamiento, estando por tanto presente en el debate contemporáneo sobre la técnica. Tras su reciente traducción al español, el pensamiento de Simondon ha despertado un gran interés en América Latina, como demuestra la organización de varios congresos y simposios, así como la proliferación de publicaciones en torno a su obra y pensamiento. Las futuras traducciones del resto de sus principales obras, asegurarán una introducción cada vez mayor en la comunidad académica. Se ha procurado presentar una mirada alternativa de la Historia de la Arquitectura Moderna, utilizando como guía a un cronista como Reyner Banham. La Era de la Máquina se ha cruzado con la Mecanología y el “vitalismo técnico” de Simondon, obteniendo como resultado una interpretación fresca, renovada y optimista de algunas de las más importantes obras de Arquitectura del siglo XX, que seguro contribuirán al desarrollo de la del siglo XXI, inmerso ya en el cambio de paradigma hacia la sostenibilidad y la ecología. ABSTRACT 'TRANS architecture. Imagination, invention and technical individuation of the architectural technical object. Technology transfer from the Transport Industry to Architectural Design [1900- 1973]' is a thesis dealing with the relationship between Architecture and the Technical Object during Modernity5. The theme of the thesis revolves around the technical culture, material culture and the history of twentieth-century technology. Hypothesis Held here is the existence of some architectures defined as technical objects. A study has been developed to prove if those architectures share the ontological properties of a technical object. Industry and Architecture The history of Modern Architecture is also the history of modern industry and its facilities, its products and devices, its procedures and production processes. Factories, workshops, steel mills, shipyards, mines, refineries, laboratories, cars, yachts, airplanes, airships, shuttles, space stations, home appliances, personal computers, mobile phones, motors, batteries, turbines, rigs, hulls, chassis, bodies, fuselages , composites and synthetic materials, the assembly line, modular manufacturing, the supply chain, process engineering, the planned obsolescence ... All these technical objects are constantly evolving thanks to the inconsistency of the human imagination and, as our intermediates, keep changing our way of relating and being in the world. Architecture, alike other technical objects, mediates between man and the World. In order to frame the vast field of the research, it has been filtered according to various parameters and qualities of Industry, establishing also a time frame which is related to a particular science-based way of making. The start of an industrial development, based on scientific knowledge is given from the Second Industrial Revolution -by consensus on the last third of the nineteenth century. This frame puts the focus of the thesis in the process of industrialization experienced by the Architecture of at least one century, and tours through Modernity during the first 75 years of the twenieth century. During this time, architects have made transfers of images, techniques, processes and materials from Industry, serving as a source of knowledge and thus allowing Architecture to evolve as a discipline. To reasonably address the enormous scope of the thesis, the industrial sector of transportation has ben chosen. It is not only a historical source of inspiration for architects, but also a traditional source of technology transfer for Modern Architecture. Technical sets such as shipyards, automobile factories or aircraft hangars, technical individuals as boats, cars or planes, and technical elements like the structures shaping and supporting them, are all technical objects which share properties with the architectures here presented. The launch of the moving assembly line in 1913, is instrumentally taken as a first time focus, from which to describe the evolution of many technical objects in the First Machine Age; a second focus could be found in 19586, year of the creation of the North American Space Agency (NASA), serving as a reference to the Second Machine Age. Most architectural technical objects used to test the hypothesis, gravitate around this second focus, in a range of plus or minus 25 years, with a clear intention to synchronize the time for action and time of thought. Architecture and Technical Object Technical objects have always been related to Architecture. In the past, the same technician who planned and oversaw a building structure, invented the devices and machines to carry them out. The foremen were the true 'technology transfer agents' from Industry. Their knowledge naturally related different manufacturing techniques to make diverse technical objects. Brunelleschi invented various cranes to build the dome of Santa Maria dei Fiori in Florence (ca.1461). Probably inspired by the reedition of Vitruvius’ treaty De Architectura (15 BC), whose last chapter was dedicated to the machines of classical Roman architecture and quoted inventors as Archimedes, the florentine architect was the first to patent an invention in 1421: an amphibious craft serving as a means of transportation for Carrara marble along the Arno river. At the daw of the Second Industrial Revolution, whose development was based on the scientific knowledge, we find a primitive modern example of the relationship between Architecture and a Technical Object: The Crystal Palace, built in London for the Great Exhibition of 1851 World Industry and designed by Joseph Paxton, was the largest to date industrialized building, and it will be always associated with the McCormick Reaper, worthy of the Grand Jury’s Prize. Similar characteristics could be emphasized of both technical objects, such as their industrial origin and for being be the complex result of a simple assembly of technical elements. Since then, technological development has experienced a continued acceleration, resulting in an increasing specialization and separation of knowledge about techniques which were naturally attached in the past. This process has happened at the expense of an integrative knowledge and against promiscuity between Industry and Architecture. This is, undoubtedly, an inherent sign of our time, which causes the natural and interest of architects and other technicians about transfers, trans-disciplinarity and inter-disciplinarity, as a reaction to reestablish channels of relationships between these different fields of knowledge. The emergence of technical objects as modern vehicles in the early twentieth century (the car, the Ocean liner, the airship or the airplane) is directly related to the Architecture of the First Machine Age. Modern architects’ fascination for those new ‘inhabitable’ structures has been maintained for over a century, with different intensity and paying attention to one and other technical objets, ranging from the domain of the symbolic value of the vehicles as objectsimages, during heroic period of the First Machine Age, to the more inquisitive glance characterizing the Second Machine Age, which sought a deeper understanding of the organization of such objects and the technical system to which they belonged. The periods immediately following both World Wars, showed a concentrated effort to bring new images of vehicles to the imaginary of architects, by means of publications and exhibitions. The homologous relationship between architectures and vehicles, in their capacity as living structures, is something well known since Le Corbusier used the images of cars, boats and airplanes to illustrate his manifesto, Towards an architecture in 1923. Modern vehicles have been the means by which to convey the concepts eager to transform the traditional attributes of Architecture: those relating to its manufacture, habitability, duration, functionality or aesthetics. The automobile stands out during the 30s and 50s, and the new vehicles of the Space Program satnd in the 60s and 70s. The prior knowledge and documentation of these events were a good indication to identify the industrial sector of Transportation as one of especial importance and as a fertile provider of technology transfer cases for Architecture. The Modern tradition, inaugurated by Le Corbusier in the 20s, has been maintained and defended by a host of modern architects like Albert Frey, Richard Neutra, Ralph Soriano, Charles Eames and Craig Ellwood, whose work - inspired by the legacy of previous technologists as Bucky Fuller or Jean Prouvé- was fundamental and a mandatory reference for the next generation of architects like Cedric Price, Archigram, Norman Foster, Richard Rogers, Renzo Piano, Jean and Richard Horden Kaplicky, among others. They have all contributed to increase the imaginary of the technical object, adding to it their architectural works. In the passage of the thesis, we repeatedly find a number of architects, who have been grouped according to a 'genealogical' structure, which has been called 'Technical Lineage'. Gathered by common interests and similar views or attitudes to the architectural design, understood as a technical object, they have operated through the practice of technology transfer, without limiting itself to specific compositional techniques of the architectural discipline. During the investigation, a selection of explicit references made by those architects, about other technical objects referring to their Architecture, has been compiled, showing constants and variations in their interests throughout the century, which has led to conclusions such as, having technicians sets (zeppelins factories, airships factories, car factories and shipyards) been taken by the architects of the first Modernity, as their main formal, compositional and imaginary models, while the Second Machine Age had taken them as a spatial and organizational model for their architecture. The above mentioned lineage of technologists includes weel-known ‘seed lines’ as: Eiffel- Suchov-Behrens, Gropius-Mies-LeCorbusier- Lods-Prouve, in continental Europe; British branches as Loudon-Paxton-Williams-Stirling- Gowan-Smithsons-Price-Archigram-Foster- Rogers-Piano-Kaplicky-Horden. And we could also find intercontinental connections as Fuller- Eames-Rudolph-Foster-Rogers, or other less predictable ramifications as LeRicolais-Kahn Piano-Kaplicky, or LeCorbusier-Frey-Lacaton & Vassal... Many more would surely deserve to be included in this list, and indeed, the thesis assumes the impossibility of including them all (for practical reasons) and even contemplates possible future extensions. The material included herein is to demonstrate the continuity in the approaches, statements and in the applied architectural design techniques, from which we can draw some conclusions. Today, one hundred years after Ford put up the moving assembly line, we still find this tradition alive in the words of the architect Richard Horden, whose work carries with it –as with the information embedded in every technical element- the whole techncial culture of a modern tradition. Horden is represented here as one of the exponents of what I have called the lineage of technologists. That is why I wanted to conclude the thesis with an interview to Richard Horden, held in May 2015 in his studio in London's Berkeley Square (see Appendices). Guides For the development of this thesis, another thesis, entitled: The mode of existence of technical objects, is taken as the main reference work. Read and published in 1958 by the French philosopher Gilbert Simondon [1924- 1989], it was dedicated to the ontology of the technical object. This work frames the intellectual approach of the thesis, which connects with phenomenology to mobilize a particular vision of Architecture. It is used as a model of ontological analysis to study its genesis, invention and evolutionary processes. To develop these, another work by the same author, titled Imagination and Invention (1965- 1966) has been used as a bibliographical complement. As for the disciplinary historical sources, Reyner P. Banham [1922-1988] and Martin E. Pawley [1938-2008] have been chosen as guides through the modern Architecture of the twentieth century. Their cronical reports on the First and Second Machine Age and their critical works have served as an index from which to reconstruct the imaginary of the modern technical object in the Machine Age7, and to stock up on projects and works of architecture, used as case studies for the thesis. These works have also been used as triggers for other literatures, which has been complementary to the former. Objectives of the Thesis The main objective of the thesis is to prove its hypothesis: if a work of architecture can be considered a technical object and under what conditions, building then a criterion for recognizing when a work of architecture meets the definition of a technical object. Another aim is to demonstrate the importance and power of Technology Transfer in the evolutionary process of Architecture, and to do it, some examples of a methodology for architectural design that Martin Pawley called 'Design by Assembly' are presented. It is also an objective to reconstruct an Atlas of the imaginary of the modern technical object, in order to better understand the causes, reasons and purposes that led modern architects to pursue architecture as a technical object. This Atlas allows to panoptically relate the various technical objects, revealing the true importance and significance of those and the architecture with whom they interact. Architectures are again at the largest and most complex industrial context and the history of technology, which always belonged. Thus, they are able to reveal all the knowledge-in the shape of information-carried in their own 'genetic' code, displaying full chapters of technological culture as old as mankind and constantly growing and evolving. Thesis: Proving the Hypothesis Simondon ontologically defined the technical object as ‘that of which genesis exists’ and that develops ‘a tendency towards solidarity and unity’. For an architecture to be recognized as a technical object, a number of conditions should be given, in the successive phases involved in their mode of existence: Imagination. These architectures refer to an imaginary featuring images-object other technical objects (technical sets, technical individuals and technical elements). These images are the means to an eidetic transfer of the technical objects which they symbolize. Invention. These architectures are the result of tectonic transfers, which occur during the architectural design process, by assembling materials, components or procedures used in industry for the production of other technical objects. Individuation. These architectures evolve and are individualized by ‘concretization’, a process leading to the full integration of its parts and aiming the full convergence of its functions into a single structure. This integration tends towards the naturalization of the technical object, by means of a symbiotic incorporation of their associated milieus. After checking if there is a genesis of them, which evolves through the phases of imagination and invention and concretization, their imaginary, materiality, structure and organization are analyzed in order to detect patterns and common organizational principles to other technical objects counterparts. Structure The main text of the thesis consists of three parts. Before there is an Introduction to the main concepts that are exploited in the thesis on ontology Simondonian technical object, and technology transfer applied to Architecture. Then a first part covers the Imaginary of the modern technical object, a second part is dedicated to the Invention and a third part to the individuation process The thesis ends with a section for the Discussion and the Conclusions. The Introduction to the technical object, this is ontologically defined and its different categories are distinguished. The process of genesis of the technical object and the phases of imagination, invention and indivuation are explained. Concepts as Transduction, Technicality and Technical system are presented for being fundamental to understand the concept of Technology Transfer that will take place later. The concretization is explained as the particular mode of individuation and evolution of technical objects, a process by which the different parts of a technical object, are integrated and begin a tendency towards a convergence in itself. The first part, dedicated to the Imagination of the architectural technical object presents a parcial "archaeological" reconstruction the imaginary of the modern technical object, intended to better understand its genesis and the relationship with other technical objects. The imaginary sources are searched in the premises of the Industry of the early twentieth century, and particularly in the factories of modern vehicles, in order to see, to what extent these technical objects were important to imagine modern architecture. The reconstruction is continued until the Second Machine Age, when a new, more inquisitive and precise gaze turns to other factories, other vehicles and other components and materials, inquiring now about their organizational qualities. The second part is devoted to the Invention of the architectural technical object. The effectiveness of the simondonian concept of Transduction is checked: a transmitted and transformed sign or information, which relates to Technology Transfer, a synergetic process by which an industrial sector benefits from the development of another sector, to which some architects and historians have explicitly referred to explain their works during Machine Age, and which is crucial for the development of the industry. Technology transfer would be the transmission of a set of information or knowledge about technique, including the factual sphere of technique, but also the sensitive sphere of experience. In their application to Architecture, these transfers have been classified according to three types: Eidetic, Tectonic and Organic. Eidetic Transfers operate from an intuitive knowledge and are useful for transmitting information about the essence of the technical object serving as a source. Abstract concepts are transmitted through the object-images to produce an equivalent transformation in Architecture. A group of concepts that have been the subject of technology transfers of eidetic nature, and have been originated in the imaginary of the modern technical object, have been detected as a result of the research: FABRICATED, INHABITABLE, FUNCTIONAL, EFFICIENT, OBSOLESCENT, and BEAUTIFUL. The transfers can also be Tectonic when, that which is transferred is a constructive or structural technique, applied through artificial MATERIALS such as metals, composites as the ferrocement, or plywood, or alloys such as aluminum; or by means of the assembly of STRUCTURES or parts of other technical objects such as hulls, fuselages, car bodies or rigs, resulting in the invention of a new architectural technical object. In the case of ORGANIC transfers, what is transferred is an organizational technique, applied by means of a set of PROCEDURES defining the activity of the architect as a technologist and inventor of technical objects. These procedures have a transformative effect on three traditional institutions for Architecture: the School, the Atelier and the Work, and the results are summarized in new models of organization of the Education of Architecture, with the onset of the Architectural Design Studios or workshops; new models of organization of the practice of architect: the technical office; and new models of space organization, based on the spatial organization of the industry, resulting in spatial patterns or spatial matrices; a new model of organization of the project, which uses graphical tools and industrail protocols as the assembly as a methodology; a new model of architectural production based on the industrialization. After explaining the concepts and the genesis of assembly and montage, Design by assembly is presented as a method that promotes architectural invention, and is shown using some case studies analyzed in the thesis, in which there has been made some conceptual, constructive or organizational transfer. After analyzing the architectures studied in the thesis, genetic method proposed by Simondon was used to understand every particular evolution, reconstructing their genealogical lines up to their ancestors, identifying a series of genetic lineages, which correspond to the technical sets studied in the thesis : the shipyard, the car factory, and aircraft factory. The real ancestors of Modernity. The spatial organization systems of these technical sets are directly related to the technical object that is fabricated within them. From that point, a number of operational matrices are defined (MILL, SHOP, SHED) and used to make a taxonomy of the architectural technical object. This is exemplified by some projects by architects as Norman Foster, Richard Rogers, Renzo Piano, Nicholas Grimshaw, Jean and Richard Horden Kaplicky. Interest of the thesis Since the beginning of the new century, several authors have shown a renewed interest in defining what a project is, how it is constituted and what it is for. The approaches to the subject are brought from analytic philosophy (Galle, 2008) or from the philosophy of technology (Verbeek, 2005; Vermaas, 2009) and they often speak about the relationship between design and material culture (Dorschel 2003, 2010 or Preston Boradkar 2012). It is also important to note the recent and growing interest in the work of French philosopher Gilbert Simondon [1924-1989], mainly known for its important contribution to the philosophy of technology and phenomenology of the technical object, and the influence on the thinking of contemporary philosophers as Paolo Virno, Bruno Latour or Gilles Deleuze, being the latter a author present in many doctoral theses and theoretical research conducted at major architecture schools around the world since the 90s to the present. The republication and translation of the work of Simondon (eng. 1980, spn. 2008) has received the attention from current philosophers such as Bernard Stiegler who continues to use its study and analysis to advance his thinking, thus being present in the contemporary debate about the technique. After its recent translation into Spanish, the thought of Simondon has aroused great interest in Latin America, as evidenced by the organization of various conferences and symposia, as well as the proliferation of publications about his work and thought8. Future translations of the rest of his major works, will ensure increased introduction in the academic community. Efforts have been made to present an alternative view of the History of Modern Architecture, using a reporter as Reyner P.Banham as a guide. The Machine Age intersects Simondon’s mechanology and his "technical vitalism", resulting in a fresh, renewed and optimistic interpretation of some of the most important works of Architecture of the twentieth century, which will surely contribute to the development of this century’s Architecture, already immersed in the paradigm shift towards sustainability and ecology.