Anisotropic characterization of crack growth in the tertiary flow of asphalt mixtures in compression

Asphalt mixtures exhibit primary, secondary, and tertiary stages in sequence during a rutting deterioration. Many field asphalt pavements are still in service even when the asphalt layer is in the tertiary stage, and rehabilitation is not performed until a significant amount of rutting accompanied by numerous macrocracks is observed. The objective of this study was to provide a mechanistic method to model the anisotropic cracking of the asphalt mixtures in compression during the tertiary stage of rutting. Laboratory tests including nondestructive and destructive tests were performed to obtain the viscoelastic and viscofracture properties of the asphalt mixtures. Each of the measured axial and radial total strains in the destructive tests were decomposed into elastic, plastic, viscoelastic, viscoplastic, and viscofracture strains using the pseudostrain method in an extended elastic-viscoelastic correspondence principle. The viscofracture strains are caused by the crack growth, which is primarily signaled by the increase of phase angle in the tertiary flow. The viscofracture properties are characterized using the anisotropic damage densities (i.e., the ratio of the lost area caused by cracks to the original total area in orthogonal directions). Using the decomposed axial and radial viscofracture strains, the axial and radial damage densities were determined by using a dissipated pseudostrain energy balance principle and a geometric analysis of the cracks, respectively. Anisotropic pseudo J-integral Paris' laws in terms of damage densities were used to characterize the evolution of the cracks in compression. The material constants in the Paris' law are determined and found to be highly correlated. These tests, analysis, and modeling were performed on different asphalt mixtures with two binders, two air void contents, and three aging periods. Consistent results were obtained; for instance, a stiffer asphalt mixture is demonstrated to have a higher modulus, a lower phase angle, a greater flow number, and a larger n1 value (exponent of Paris' law). The calculation of the orientation of cracks demonstrates that the asphalt mixture with 4% air voids has a brittle fracture and a splitting crack mode, whereas the asphalt mixture with 7% air voids tends to have a ductile fracture and a diagonal sliding crack mode. Cracks of the asphalt mixtures in compression are inclined to propagate along the direction of the external compressive load. © 2014 American Society of Civil Engineers.

Ethics in the provision of removable partial dentures

Aim: To investigate the construction of cobalt-chromium removable partial dentures by commercial private dental laboratories. Methods: Ninety master casts for fabrication of cobalt-chromium removable partial dentures were obtained from three commercial laboratories randomly selected. Casts were assessed for dental arch treated, Kennedy classification, cast surveying, denture design information provided by the dentist, and mouth preparation (rest seat, guiding plane and retentive area). Dental technicians answered a questionnaire regarding qualification of assisted dentists, monthly number of framework castings, and use of dental surveyor. Mouth preparation was compared among laboratories using Kruskal-Wallis test (α=0.05). Results: The percentage of Kennedy class I was 16%, class II 19%, class III 56%, and class IV 9%. The majority of master cats (51%) examined was sent to dental laboratories without any design information and did not comply with ethical guidelines in the provision of RPD. Approximately half of the casts were considered “inappropriate” for guiding planes and retentive areas. One of the laboratories presented all casts “inappropriate” for rest seat distribution (p<0.001). Conclusions: Mouth preparation frequently failed for guiding planes, retentive areas and distribution of rest seats. It is necessary to provide students with adequate clinical experience at the dental school environment, which will actually be carried into the practice of dentistry.

Ethics in the provision of removable partial dentures

Aim: To investigate the construction of cobalt-chromium removable partial dentures by commercial private dental laboratories. Methods: Ninety master casts for fabrication of cobalt-chromium removable partial dentures were obtained from three commercial laboratories randomly selected. Casts were assessed for dental arch treated, Kennedy classification, cast surveying, denture design information provided by the dentist, and mouth preparation (rest seat, guiding plane and retentive area). Dental technicians answered a questionnaire regarding qualification of assisted dentists, monthly number of framework castings, and use of dental surveyor. Mouth preparation was compared among laboratories using Kruskal-Wallis test (α=0.05). Results: The percentage of Kennedy class I was 16%, class II 19%, class III 56%, and class IV 9%. The majority of master cats (51%) examined was sent to dental laboratories without any design information and did not comply with ethical guidelines in the provision of RPD. Approximately half of the casts were considered “inappropriate” for guiding planes and retentive areas. One of the laboratories presented all casts “inappropriate” for rest seat distribution (p<0.001). Conclusions: Mouth preparation frequently failed for guiding planes, retentive areas and distribution of rest seats. It is necessary to provide students with adequate clinical experience at the dental school environment, which will actually be carried into the practice of dentistry.

Table 2 & Appendix A. Properties of operations injecting CO2 into saline aquifers

The experience from CO2 injection at pilot projects (Frio, Ketzin, Nagaoka, US Regional Partnerships) and existing commercial operations (Sleipner, Snøhvit, In Salah, acid-gas injection) demonstrates that CO2 geological storage in saline aquifers is technologically feasible. Monitoring and verification technologies have been tested and demonstrated to detect and track the CO2 plume in different subsurface geological environments. By the end of 2008, approximately 20 Mt of CO2 had been successfully injected into saline aquifers by existing operations. Currently, the highest injection rate and total storage volume for a single storage operation are approximately 1 Mt CO2/year and 25 Mt, respectively. If carbon capture and storage (CCS) is to be an effective option for decreasing greenhouse gas emissions, commercial-scale storage operations will require orders of magnitude larger storage capacity than accessed by the existing sites. As a result, new demonstration projects will need to develop and test injection strategies that consider multiple injection wells and the optimisation of the usage of storage space. To accelerate large-scale CCS deployment, demonstration projects should be selected that can be readily employed for commercial use; i.e. projects that fully integrate the capture, transport and storage processes at an industrial emissions source.

Toledo, locus terribilis. Iglesia y milagro en el De viris illustribus de Ildefonso de Toledo

A mediados del siglo VII, el obispo Ildefonso de Toledo (657-667) elaboró su propio catálogo de hombres ilustres, continuando una tradición cuyos orígenes cristianos se remontaban a Jerónimo en el siglo IV. Sin embargo, en lugar de reproducir los modelos de sus antecesores cristianos, entre los que se incluyen además a Genadio de Marsella e Isidoro de Sevilla, el De viris illustribus de Ildefonso incorporaba cambios significativos en el género. Este artículo estudia el tópico del milagro en el opúsculo toledano con el objetivo de indagar qué tipo de relación estableció la Iglesia visigoda de la segunda mitad del siglo VII con este tipo de fenómenos y qué estrategias elaboró en función de él.

Rotary moulding of ceramic hollow wares

A novel processing method for the fast and economic production of hollow ceramic components has been developed by combining in situ coagulation moulding with a modified version of the technique of rotary moulding[Binner, J. G. P., Al-Dawery, I. A., Tari, G. and Yan, Y., Rotary casting technique. UK Patent application No. 0506349.0, March 2005], the latter being adapted from the polymer industry. The process was found to require a high solids content suspension, hence development work was performed in this direction though in the end a new, commercial suspension was utilised. Of the three forming routes of gel casting, direct coagulation casting and in situ coagulation moulding, the latter was found to be the most promising for the new process of rotary moulding of ceramics. Due to the low value of clay-based ceramics, a new low cost coagulant was identified and the effect of lactone concentration and temperature on setting time determined. Following substantial optimisation work, it was found that a two-speed approach to multi-axial rotation was the most successful; medium sized cream jugs could be produced in just 7 min. With respect to mould materials, the porous resin normally used for pressure casting of sanitary ware was found to be the best option, though since this is quite expensive conventional plaster-of-paris moulds were found to be a suitable material to enable companies, particularly SMEs, to become familiar with the technology whilst avoiding high costs for trials. The processed articles could be successfully fired and glazed using gas-fired kilns with no sign of any black cores. Major advantages of the process include the ability to precisely calculate the amount of ceramic slip required, eliminating either slip wastage or the need to pour used slip back into the virgin material as currently happens with slip casting. In addition, since the precursor suspension has a very high solids content, the time and energy required to dry the green product and associated moulds has been considerably reduced. © 2008 Elsevier Ltd. All rights reserved.

Sonic Places: In Conversation with Peter Cusack

In this interview, Recomposing the City co-directors Sarah Lappin and Gascia Ouzounian talk with Peter Cusack about his recent work, reflecting in particular on relationships between sound, sound art, planning processes and urban communities. Cusack, a field recordist and sound artist, has been a leading figure in acoustic ecology and soundscape studies for more than two decades

Status of the extinct giant lacertid lizard Gallotia simonyi simonyi (Reptilia: Lacertidae) assessed using mtDNA sequences from museum specimens

[EN] Gallotia simonyi (Steindachner, 1889) is a member of an endemic Canary Island genus and is among the largest of the approximately 250 recent species of lacertid lizards. Although Steindachner gave the locality of the types as the Roques de Salmor, off El Hierro island, previous workers (Urusaustegui, 1983; Manrique & Saavedra, 1873; Viera & Clavijo, 1983) and subsequent ones (Machado, 1985) regard the more western of the two rocks in the group, the Roque Chico de Salmor, as the actual source of material. The Roque Chico is 37 m high with a surface area of less than 10,000 m2 and lies 830 m from the northern coast of El Hierro (Machado, 1985).

God and War: the Church of England and Armed Conflict in the Twentieth Century

Despite narratives of secularization, it appears that the British public persistently pay attention to clerical opinion and continually resort to popular expressions of religious faith, not least in time of war. From the throngs of men who gathered to hear the Bishop of London preach recruiting sermons during the First World War, to the attention paid to Archbishop Williams' words of conscience on Iraq, clerical rhetoric remains resonant. For the countless numbers who attended National Days of Prayer during the Second World War, and for the many who continue to find the Remembrance Day service a meaningful ritual, civil religious events provide a source of meaningful ceremony and a focus of national unity. War and religion have been linked throughout the twentieth century and this book explores these links: taking the perspective of the 'home front' rather than the battlefield. Exploring the views and accounts of Anglican clerics on the issue of warfare and international conflict across the century, the authors explore the church's stance on the causes, morality and conduct of warfare; issues of pacifism, obliteration bombing, nuclear possession and deterrence, retribution, forgiveness and reconciliation, and the spiritual opportunities presented by conflict. This book offers invaluable insights into how far the Church influenced public appraisal of war whilst illuminating the changing role of the Church across the twentieth century.

Age and nature of 560–520 Ma calc-alkaline granitoids of Biarjmand, northeast Iran: insights into Cadomian arc magmatism in northern Gondwana

The Biarjmand granitoids and granitic gneisses in northeast Iran are part of the Torud–Biarjmand metamorphic complex, where previous zircon U–Pb geochronology show ages of ca. 554–530 Ma for orthogneissic rocks. Our new U–Pb zircon ages confirm a Cadomian age and show that the granitic gneiss is ~30 million years older (561.3 ± 4.7 Ma) than intruding granitoids(522.3 ± 4.2 Ma; 537.7 ± 4.7 Ma). Cadomian magmatism in Iran was part of an approximately 100-million-year-long episode of subduction-related arc and back-arc magmatism, which dominated the whole northern Gondwana margin, from Iberia to Turkey and Iran. Major REE and trace element data show that these granitoids have calc-alkaline signatures. Their zircon O (δ18O = 6.2–8.9‰) and Hf (–7.9 to +5.5; one point with εHf ~ –17.4) as well as bulk rock Nd isotopes (εNd(t)= –3 to –6.2) show that these magmas were generated via mixing of juvenile magmas with an older crust and/or melting of middle continental crust. Whole-rock Nd and zircon Hf model ages (1.3–1.6 Ga) suggest that this older continental crust was likely to have been Mesoproterozoic or even older. Our results, including variable zircon εHf(t) values, inheritance of old zircons and lack of evidence for juvenile Cadomian igneous rocks anywhere in Iran, suggest that the geotectonic setting during late Ediacaran and early Cambrian time was a continental magmatic arc rather than back-arc for the evolution of northeast Iran Cadomian igneous rocks.

Histoire de l'empire de Russie, sous Pierre-le-Grand,

Mode of access: Internet.

Note additionnelle sur les espèces de Chlorodopsis (Brachyures)

The present paper completes the authors’ studies (1958) on the species of Chlorodopsis of Viet-Nam. It gives observations on the new specimens collected previously and of a new species. It exposes the results of the observations on specimens communicated to the authors by the Museum of Paris, the Indian Museum of Calcutta and the Bishop Museum of Honolulu. These specimens include the syntypes of Chl. melanochira and Chl. Woodmasoni and some samples of another species not yet recorded on the Viet-Nam seashores. The taxonomic position of various species is revised and species maintained by Balss (1938) in the genus Pilodius are included in the genus Chlorodopsis. The authors give a new key to separate all the species of the genus Chlorodopsis.

Status of Endangered and Threatened Sand Area Species of the Illinois Flora

This study was undertaken to determine the distribution and habitat requirements of many of the endangered and threatened plant species associated with the sand deposits of Illinois. Approximately 70 species of endangered and threatened plants are known to grow in these deposits. The habitat fidelity and natural community types were determined for 40 of these species that are restricted to these glacial drift sand habitats. Plant community types, associated species, moisture requirements, and other data concerning each of the plant species were determined by reviewing the pertinent literature, searching the Illinois Department of Natural Resources Natural Heritage Database, through discussions with botanists and natural heritage biologists, examination of herbarium specimens, and our studies of the vegetation of the Illinois sand deposits. Throughout the course of these studies, most of the nature preserves, state parks, and identified natural areas in the sand regions were visited on numerous occasions and vegetation surveys undertaken. The information presented in this paper could allow rare plant conservation in Illinois to become more proactive by encouraging the selection of sites where in situ conservation efforts could be conducted by state, local, and nongovernmental organizations.

Heterosis in locally adapted sorghum genotypes and potential of hybrids for increased productivity in contrasting environments in Ethiopia

Increased productivity in sorghum has been achieved in the developed world using hybrids. Despite their yield advantage, introduced hybrids have not been adopted in Ethiopia due to the lack of adaptive traits, their short plant stature and small grain size. This study was conducted to investigate hybrid performance and the magnitude of heterosis of locally adapted genotypes in addition to introduced hybrids in three contrasting environments in Ethiopia. In total, 139 hybrids, derived from introduced seed parents crossed with locally adapted genotypes and introduced R lines, were evaluated. Overall, the hybrids matured earlier than the adapted parents, but had higher grain yield, plant height, grain number and grain weight in all environments. The lowland adapted hybrids displayed a mean better parent heterosis (BPH) of 19%, equating to 1160 kg ha− 1 and a 29% mean increase in grain yield, in addition to increased plant height and grain weight, in comparison to the hybrids derived from the introduced R lines. The mean BPH for grain yield for the highland adapted hybrids was 16% in the highland and 52% in the intermediate environment equating to 698 kg ha− 1 and 2031 kg ha− 1, respectively, in addition to increased grain weight. The magnitude of heterosis observed for each hybrid group was related to the genetic distance between the parental lines. The majority of hybrids also showed superiority over the standard check varieties. In general, hybrids from locally adapted genotypes were superior in grain yield, plant height and grain weight compared to the high parents and introduced hybrids indicating the potential for hybrids to increase productivity while addressing farmers' required traits.