Knowledge pipeline in freight pipeline industry: competence- based model for open innovation

There is growing concern over the challenges for innovation in Freight Pipeline industry. Since the early works of Chesbrough a decade ago, we have learned a lot about the content, context and process of open innovation. However, much more research is needed in Freight Pipeline Industry. The reality is that few corporations have institutionalized open innovation practices in ways that have enabled substantial growth or industry leadership. Based on this, we pursue the following question: How does a firm’s integration into knowledge networks depend on its ability to manage knowledge? A competence-based model for freight pipeline organizations is analysed, this model should be understood by any organization in order to be successful in motivating professionals who carry out innovations and play a main role in collaborative knowledge creation processes. This paper aims to explain how can open innovation achieve its potential in most Freight Pipeline Industries.

State Convergence Theory Applied to a Delayed Teleoperation System

State convergence is a control strategy that was proposed in the early 2000s to ensure stability and transparency in a teleoperation system under specific control gains values. This control strategy has been implemented for a linear system with or without time delay. This paper represents the first attempt at demonstrating, theoretically and experimentantally, that this control strategy can also be applied to a nonlinear teleoperation system with n degrees of freedom and delay in the communication channel. It is assumed that the human operator applies a constant force on the local manipulator during the teleoperation. In addition, the interaction between the remote manipulator and the environment is considered passive. Communication between the local and remote sites is made by means of a communication channel with variable time delay. In this article the theory of Lyapunov-Krasovskii was used to demonstrate that the local-remote teleoperation system is asymptotically stable.

Idas y venidas. Los viajes de arquitectura en España entre 1920 y 1960

Esta tesis se propone indagar en las vias por las que la arquitectura española cambió en el periodo comprendido entre 1920 y 1960 y el papel que los viajes tuvieron en dicho cambio. La investigación busca demostrar que, junto a otros factores como la llegada de revistas y libros y las conferencias de arquitectos de la talla de Le Corbusier, Gropius, Mendelsohn, Neutra o Aalto, los viajes tuvieron un papel clave en el proceso de apertura de miras y que provocó que, bien a traves de lo publicado en las revistas por los “arquitectos viajeros” o por el reflejo que tuvo lo conocido fuera de nuestras fronteras en proyectos y obras concretas, un buen numero de arquitectos, que no tuvieron la posibilidad de viajar, pudieron conocer que existía una realidad muy distinta a la que los profesores en la Escuela les habían enseñado o a la que estaban acostumbrados a ver en otros arquitectos de generaciones anteriores basada, en buena medida, en la recuperación de un estilo propio nacional centrandose en los historicismos. A lo largo de la investigación trataremos de ver que efecto produjo la apertura de fronteras y que papel tuvieron los viajes en dicho proceso. También nos centraremos en comprobar hasta qué punto cambió la manera de ver la arquitectura de los protagonistas del viaje y de aquellos que recibieron la información por ellos encontrada. Veremos cómo dicha información es cuantificable, clasificable y demostrable en propuestas concretas. Será importante ver que motivó su salida, que buscaban y que encontraron así como, entre las influencias recibidas, cuales tuvieron un mayor calado: las propuestas europeas o las americanas, y dentro de las primeras, las holandesas, las alemanas o las francesas. Los objetivos que se persigue conseguir son: contribuir a un mayor conocimiento de la arquitectura entre 1920 y 1960 a través de las conexiones internacionales y el ensanchamiento de horizontes, recopilar, clasificar y analizar todo el material obtenido relacionando los viajes con las biografías de los arquitectos protagonistas, estudiar qué interesa a los arquitectos españoles cuando van fuera y porqué (será importante ver quiénes de entre los arquitectos son más abiertos a las corrientes europeas y que motivó su salida en busca de nuevos lenguajes), ordenar las reflexiones que exponen los arquitectos a la vuelta de sus viajes y ver en que propuestas y de qué forma los arquitectos plasman lo encontrado en su búsqueda en el extranjero. Para conseguir estos objetivos estructuraremos la investigación en tres bloques: En el primero de ellos nos centraremos en profundizar como era la arquitectura española a principios del siglo XX. Para poder entender mejor las transformaciones que los viajes provocaron será necesario conocer cuál era la arquitectura predominante en estos años que, como veremos, consistía en la búsqueda de un estilo nacional propio dirigiendo su mirada al pasado. También veremos cómo un grupo de arquitectos (Palacios, Flórez, Torres Balbás o Anasagasti) fueron pioneros en el deseo de mirar fuera de nuestras fronteras así como dedicaremos especial atención a cómo era la formación en la Escuela. El segundo capítulo, que abarca desde principios de los años 20 hasta la Guerra Civil, tratará de demostrar la importancia que tuvo en el proceso de permeabilidad frente a las corrientes extranjeras los viajes que los arquitectos realizaron y que, sumados a la llegada de revistas y las visitas de los principales arquitectos modernos, provocaron una primera apertura como respuesta a los historicismos predominantes. Entre los arquitectos viajeros destacaremos las figuras de Fernando García Mercadal (incidiendo en su importancia como difusor de la arquitectura moderna), Rafael Bergamín, Ramón Sánchez Arcas y Luis Lacasa. También nos detendremos en ver la importancia que tuvieron las exposiciones (con especial atención a la de Artes Decorativas de París de 1925 y la de la Deutscher Werkbund en Stuttgart en 1927) que se realizaron estos años y como llegó la información a nuestro país. El tercer y último capítulo arranca con el periodo de posguerra, una época de transición pues los viajes que se realizaron fueron escasos y en la mayoría de las ocasiones no se llevaron a cabo en busca de nuevos caminos. Veremos cómo tras la Guerra y de la mano de la dictadura se produce, de la misma forma que en la Alemania nazi, una vuelta al interés por los historicismos de principios de siglo. Para entender mejor este periodo haremos un repaso a la obra de Luis Gutiérrez Soto por ser explicativa de lo cambiante de las corrientes arquitectónicas de estos años. Tras el análisis de los sucedido en posguerra nos dedicaremos a analizar, de la misma forma que en el primer periodo, la manera en que se produjo el rechazo al estilo nacional de nuevo gracias a la llegada de libros y revistas, lo publicado por las revistas españolas, las visitas de arquitectos de prestigio así como los viajes de un grupo de arquitectos que, de manera individual, salieron al extranjero en busca de apoyo, de referencias en los que cimentar su arquitectura. De este grupo, por la importancia que los propios protagonistas dieron al hecho de viajar como complemento a su formación y por la manera en la que reflejaron lo aprendido en proyectos concretos destacamos a Francisco de Asís Cabrero, Miguel Fisac, Ramón Vázquez Molezún y Francisco Javier Sáenz de Oiza. De nuevo, igual que en el primer capítulo finalizaremos la investigación dedicando un apartado a las exposiciones (fundamentalmente la Interbau de Berlín de 1957) celebradas en estos años. Para finalizar estableceremos las conclusiones que nos llevarán a comprobar hasta qué punto la arquitectura española en los periodos previo y posterior a la guerra cambió y en qué medida tuvieron importancia los viajes que los arquitectos españoles realizaron al extranjero en dicho cambio… ABSTRACT This thesis aims to look at the ways which Spanish architecture changed in the period between 1920 and 1960, and the way it was effected by travelling . The research will demonstrate that, together with other factors, such as the arrival of magazines, books, conferences and architects like Le Corbusier, Gropius, Mendelsohn, Neutra or Aalto, travelling played a key role in architecture. Also, it changed the way we look at architecture. Travelling, thanks to the published journals by "travelling architects” and the influence that they had - known beyond our borders in projects and concrete works, caused the arrival of a new type of architects. Even those who were not able to travel, knew that there was a very different reality than the reality the teachers at the school had taught them. Also, the “new reality” was different from the one that they were used to seeing in other architects of earlier generations, based mainly on the recovery of a national style focused on historicism. Throughout the investigation I will try to show the effect that the opening of borders and travelling had on this process. We will also focus on checking how it changed the way we see the architecture, from the point of view of the protagonists of the travels and those who received the information . We will see how that information is quantifiable and demonstrably classifiable into concrete proposals. It will be important to see which led to their departure. They sought and found among the influences, which had a major impact: the proposed European or American, and within the first, Dutch, German or French. The objectives to be achieved are: To contribute to a better understanding of architecture between 1920 to 1960 by the international connections, and widening the horizon. To collect, classify and analyze all obtained materials related to travelling with biographies of architects protagonists. To study what the interests of the Spanish architects were when they went abroad and why ( it will be important to see who among those architects were more open to European trends and prompted their departures for new languages). To order reflections exhibited by architects around his travels and to see what proposals and how architects reflected what they found in their search abroad. To achieve these objectives we will structure this research in three areas: In the first one, we will focus on how the Spanish architecture in the early twentieth century was. To better understand the changes that travelling caused it is necessary to understand that the predominant architecture in these years was in pursuit of its own national style, directing its gaze to the past, like we shall see. We will also see how a group of architects (Palacios, Flórez, Torres Balbás or Anasagasti) pioneered by looking beyond our borders and devote special attention to how the training was in the School. The second chapter, ranging from early 20s to the Civil War, will try to demonstrate the importance that travelling had in the process of diffusion currents. That, together with the arrival of magazines and visits by leading modern architects, led to a first opening in architecture, in response to the prevailing historicism. Among the travelers we highlight architects like Fernando García Mercadal (stressing his importance as a disseminator of modern architecture), Rafael Bergamín, Ramón Sánchez Arcas and Luis Lacasa. We will also stop to see the importance of exhibitions (with special attention to the Decorative Arts in Paris in 1925 and the Deutscher Werkbund in Stuttgart in 1927) that were held over the years and how the information came to our country . The third and final chapter starts with the post war period, a time of transition for the travels, which were scarce and in most cases were not conducted on new roads. We will see that after the war and with the dictatorship, a return to interest in historicism of the century occurred, just as in Nazi Germany. For better understanding of this period we will review the work of Luis Gutiérrez Soto. His work is explanatory of the changing of architectural trends over these years. After analyzing the case in post war, we turn to analyze, in the same way as in the first period, the manner in which rejection occurred in national style again with the arrival of books and magazines. Visits by prestigious architects and group travels of architects who, individually, went abroad in search of support, references on which to base their architecture. In this group of architects, due to the importance that the protagonists gave to the act of traveling to improve their training and the way in which they reflected what they learned in practical projects, I include Francisco de Asís Cabrero, Miguel Fisac, Ramon Vazquez Molezún and Francisco Javier Saenz de Oiza. Again, as in the first chapter, we will conclude the investigation dedicating a section to the exhibitions held in these years (mainly Interbau Berlin, 1957). Finally establishing conclusions lead us to see how far the Spanish architecture in the pre- and post -war periods changed and how much the trips were important to Spanish architects who performed abroad on the change...

A supervised cooperative learning system for early detection of language disorders

The Quality of Life of a person may depend on early attention to his neurodevel-opment disorders in childhood. Identification of language disorders under the age of six years old can speed up required diagnosis and/or treatment processes. This paper details the enhancement of a Clinical Decision Support System (CDSS) aimed to assist pediatricians and language therapists at early identification and re-ferral of language disorders. The system helps to fine tune the Knowledge Base of Language Delays (KBLD) that was already developed and validated in clinical routine with 146 children. Medical experts supported the construction of Gades CDSS by getting scientific consensus from literature and fifteen years of regis-tered use cases of children with language disorders. The current research focuses on an innovative cooperative model that allows the evolution of the KBLD of Gades through the supervised evaluation of the CDSS learnings with experts¿ feedback. The deployment of the resulting system is being assessed under a mul-tidisciplinary team of seven experts from the fields of speech therapist, neonatol-ogy, pediatrics, and neurology.

The Use of Patents to Assess National Innovation Systems: Evidences from Spanish Biotechnology

Spain’s economy recorded a high rate of growth from the mid-1990s onwards. At the same time, the resources allocated to Research and Development (R&D) grew at a much faster pace than in other European Union (EU) countries. Spain’s growth recorded an average rate of 2.93% from the early 1990s to 2004. Over the same period, the average growth in the EU was 0.46%. This circumstance, together with several sound policy decisions implemented between 2004 and 2009, ushered in a “golden age of Spanish biotechnology”. In terms of the national patent licenses issued by the Spanish Patent and Trademark Office (SPTO) between 2004 and 2009, the number in biotechnology grew from 84 to 151. However, the current economic situation in Spain, along with a series of political decisions taken over the past two or three years to cut spending on R&D, predicts a sharp downturn in the performance of Spanish biotechnology. This scenario makes Spain one of the best places to study the successes and failures of the management of science and allows transfer this experience to the other international regions. We need to analyze the influence of political decisions as a major factor with a bearing on the quality of science. Using patents as an indicator of scientific development, this paper analyzes the evolution of the biotechnology sector in Spain and its relationship with scientific policy and the management of R&D.

La arquitectura religiosa de Luis Cubillo de Arteaga (1954-1974)

Esta Tesis Doctoral viene a cubrir el vacío existente referido a la arquitectura religiosa de Luis Cubillo de Arteaga, arquitecto conocido fundamentalmente por su aportación a la vivienda social madrileña en los años 50 y 60, pero con una abundante obra sacra. Para ello se ha estudiado la totalidad de su producción, que abarca desde 1954 hasta 1974. La Tesis analiza su arquitectura religiosa desde varios puntos de vista, que incluyen la implantación de los edificios y sus aspectos formales, constructivos y tipológicos, estos últimos especialmente destacados tras las directrices emanadas del Concilio Vaticano II. Previamente se analizan cuatro ámbitos relevantes en la arquitectura religiosa de Cubillo. En primer lugar se estudia la labor de la Dirección General de Asuntos Eclesiásticos, a la que estaba adscrito el arquitecto y para la que realizó sus primeros trabajos. Dentro de ella se expone la evolución del modelo de Seminario entre los años 40 y 60, para analizar la relevancia de la propuesta de Cubillo para el Seminario de Castellón. A continuación se trata la participación de Cubillo en la construcción de la periferia de Madrid, aunque no referida a sus conocidos trabajos sobre vivienda social, sino a los edificios dotacionales. Así mismo se expone una iniciativa hasta ahora inédita de la Comisaría de Ordenación Urbana de Madrid para dotar de centros parroquiales a los nuevos barrios. Un tercer bloque estudia un tema recurrente a finales de los años 50, la integración de las artes en la nueva arquitectura religiosa, propiciada principalmente por José Luis Fernández del Amo. En el caso de Cubillo, las colaboraciones más notables y objeto de estudio en esta Tesis, fueron las realizadas con los artistas Arcadio Blasco y José Luis Sánchez. Por último se describe la situación de la iglesia madrileña posconciliar y su plan de construcción de nuevos templos, en el que jugó un papel muy destacado Cubillo, convertido en arquitecto de confianza de la Oficina Técnica del Arzobispado-------------------------ABSTRACT------------------------------ This Doctoral Thesis fills the emptiness of knowledge about the religious architecture of Luis Cubillo de Arteaga, architect mainly known for his contribution to Madrid's social housing in the 50s and 60s, but with a wide sacred work. To this end it have been studied his entire production, ranging from 1954 to 1974. The thesis discusses his religious architecture from several points of view, including the implementation of the buildings and their formal, constructive and typological aspects, the latter especially important by following the guidelines issued by Vatican II. Previously, four relevant areas in Cubillo’s religious architecture are analyzed. First of all, it’s studied the work of the Department of Ecclesiastical Affairs, to which the architect was assigned and for whom he made his early works. As a part of it, is exposed the evolution of Seminar model between 40s and 60s, to discuss the relevance of Cubillo’s design for the Seminar of Castellón. Next, it´s studied the participation of Cubillo in the construction of the outskirts of Madrid, although not referring to his well known work on social housing, but to the design of the comunitary buildings. It’s also explained an unpublished initiative from Commissariat for Urban Planning of Madrid to provide parish centers to new neighborhoods. A third section examines a recurring theme in the late 50s, the integration of the arts in the new religious architecture, mainly leaded by José Luis Fernández del Amo. For Cubillo, the most notable collaborations, studied in this thesis, were with the artists Arcadio Blasco and José Luis Sánchez. Finally, it´s described the situation of the post-conciliar church in Madrid and its plan to build new temples, with a prominent role of Cubillo, that became in trusted architect of the Technical Office of the Archbishop.

Optimización de la agitación de un digestor anaerobio mediante mecánica de fluidos computacional

Debido al gran interés existente en el ahorro y recuperación de energía, y en el deseo de obtener productos que permitan usos beneficiosos del fango procedente de la depuración del agua residual, la digestión anaerobia es el proceso de estabilización de uso más extendido. El tiempo de retención de sólidos es un factor clave en el proceso de digestión anaerobia. En base al tiempo de retención de sólidos, se dimensiona el volumen de los digestores anaerobios para así obtener la reducción de materia orgánica deseada, con la correspondiente producción de biogás. La geometría del digestor y su sistema de agitación deben ser adecuados para alcanzar el tiempo de retención de sólidos de diseño. Los primeros trabajos sobre la agitación de los digestores realizaban únicamente experimentos con trazadores y otros métodos de medición. En otros casos, la mezcla era evaluada mediante la producción de biogás. Estas técnicas tenían el gran hándicap de no conocer lo que sucedía realmente dentro del digestor y sólo daban una idea aproximada de su funcionamiento. Mediante aplicación de la mecánica de fluidos computacional (CFD) es posible conocer con detalle las características del fluido objeto de estudio y, por lo tanto, simular perfectamente el movimiento del fango de un digestor anaerobio. En esta tesis se han simulado mediante CFD diferentes digestores a escala real (unos 2000 m3 de volumen) agitados con bomba/s de recirculación para alcanzar los siguientes objetivos: establecer la influencia de la relación entre el diámetro y la altura, de la pendiente de la solera, del número de bombas y del caudal de recirculación en dichos digestores, definir el campo de velocidades en la masa de fango y realizar un análisis energético y económico. Así, es posible conocer mejor cómo funciona el sistema de agitación de un digestor anaerobio a escala real equipado con bomba/s de recirculación. Los resultados obtenidos muestran que una relación diámetro/altura del digestor por encima de 1 empeora la agitación del mismo y que la pendiente en la solera del digestor favorece que la masa de fango esté mejor mezclada, siendo más determinante la esbeltez del tanque que la pendiente de su solera. No obstante, también es necesario elegir adecuadamente los parámetros de diseño del sistema de agitación, en este caso el caudal de recirculación de fango, para obtener una agitación completa sin apenas zonas muertas. En el caso de un digestor con una geometría inadecuada es posible mejorar su agitación aumentando el número de bombas de recirculación y el caudal de las mismas, pero no se llegará a alcanzar una agitación total de la masa de fango debido a su mal diseño original. Anaerobic digestion is the process for waste water treatment sludge stabilization of more widespread use due to the huge interest in saving and recovering energy and the wish to obtain products that allow beneficial uses for the sludge. The solids retention time is a key factor in the anaerobic digestion. Based on the solids retention time, volume anaerobic digester is sized to obtain the desired reduction in organic matter, with the corresponding production of biogas. The geometry of the digester and the stirring system should be adequate to achieve the design solid retention time. Early works on digesters stirring just performed tracer experiments and other measurement methods. In other cases, mixing was evaluated by biogas production. These techniques had the great handicap of not knowing what really happened inside the digester and they only gave a rough idea of its operation. By application of computational fluid dynamics (CFD), it is possible to know in detail the characteristics of the fluid under study and, therefore, simulate perfectly the sludge movement of an anaerobic digester. Different full-scale digesters (about 2000 m3 of volume) agitated with pump/s recirculation have been simulated by CFD in this thesis to achieve the following objectives: to establish the influence of the relationship between the diameter and height, the slope of the bottom, the number of pumps and the recirculation flow in such digesters, to define the velocity field in the mass of sludge and carry out an energy and economic analysis. Thus, it is possible to understand better how the agitation system of a full-scale anaerobic digester equipped with pump/s recirculation works. The results achieved show that a diameter/height ratio of the digester above 1 worsens its stirring and that the slope of the digester bottom favors that the mass of sludge is better mixed, being more decisive the tank slenderness than the slope of its bottom. However, it is also necessary to select properly the design parameters of the agitation system, in this case the sludge recirculation flow rate, for a complete agitation with little dead zones. In the case of a digester with inadequate geometry, its agitation can be improved by increasing the number of recirculation pumps and flow of them, but it will not reach a full agitation of the mass of sludge because of the poor original design.

Randomised controlled trial comparing effectiveness and acceptability of an early discharge, hospital at home scheme with acute hospital care

Objective: To compare effectiveness and acceptability of early discharge to a hospital at home scheme with that of routine discharge from acute hospital.

Rab4 and cellubrevin define different early endosome populations on the pathway of transferrin receptor recycling.

During receptor mediated endocytosis, at least a fraction of recycling cargo typically accumulates in a pericentriolar cluster of tubules and vesicles. However, it is not clear if these endosomal structures are biochemically distinct from the early endosomes from which they are derived. To better characterize this pericentriolar endosome population, we determined the distribution of two endogenous proteins known to be functionally involved in receptor recycling [Rab4, cellubrevin (Cbvn)] relative to the distribution of a recycling ligand [transferrin (Tfn)] as it traversed the endocytic pathway. Shortly after internalization, Tfn entered a population of early endosomes that contained both Rab4 and Cbvn, demonstrated by triple label immunofluorescence confocal microscopy. Tfn then accumulated in the pericentriolar cluster of recycling vesicles (RVs). However, although these pericentriolar endosomes contained Cbvn, they were strikingly depleted of Rab4. The ability of internalized Tfn to reach the Rab4-negative population was not blocked by nocodazole, although the characteristic pericentriolar location of the population was not maintained in the absence of microtubules. Similarly, Rab4-positive and -negative populations remained distinct in cells treated with brefeldin A, with only Rab4-positive elements exhibiting the extended tubular morphology induced by the drug. Thus, at least with respect to Rab4 distribution, the pathway of Tfn receptor recycling consists of at least two biochemically and functionally distinct populations of endosomes, a Rab4-positive population of early endosomes to which incoming Tfn is initially delivered and a Rab4-negative population of recycling vesicles that transiently accumulates Tfn on its route back to the plasma membrane.

Development of Valpha4+ NK T cells in the early stages of embryogenesis.

The majority of T lymphocytes start to develop at around day 15 of gestation (d15)-d17 in the thymus and comprise the peripheral repertoire characterized by the expression of polymorphic T-cell antigen receptors (TCRs). Contrary to these conventional T cells, a subset of T cells, called natural killer (NK) T cells (most of them expressing an invariant TCR encoded by the Valpha14Jalpha281 gene with a 1-nt N-region), preferentially differentiates extrathymically and dominates the peripheral T-cell population at a high frequency (5% in splenic T cells and 40% in bone marrow T cells). Here, we investigated the development of NK T cells and found that the invariant Valpha14+ TCR transcripts and the circular DNA created by Valpha14 and Jalpha281 gene rearrangements can be detected in the embryo body at d9.5 of gestation and in the yolk sac and the fetal liver at d11.5-d13.5 of gestation, but not in the thymus, whereas T cells with Valpha1+ TCR expression, a major population in the thymus, were not observed at these early stages of gestation. Fluorescence-activated cell sorter analysis also demonstrated that there exist CD3+ alpha beta+ T cells, almost all of which are Valpha14/Vbeta8+ NK+ T cells, during early embryogenesis. To our knowledge, this demonstrates for the first time that a T lymphocyte subset develops in extrathymic tissues during the early stages of embryogenesis.

Applying Positive Psychology in Early Childhood.

The purpose of this paper is to introduce a framework for applying positive psychology in elementary classrooms. The target age group is children in grades K-3 (ages 5 to 8) because this age group can benefit the most from an early introduction to strategies that promote positive development (Cowne & Hightower, 1989; White, 1996). The following sections will: (a) introduce constructs of positive psychology; (b) present developmental data on how these constructs can be applied to children ages 5 to 8 years; (c) present ideas for incorporating positive psychology practice into K-3 classrooms; (d) present strategies for incorporating positive psychology with multicultural considerations; and (e) present ideas on how to implement strategies based on positive psychology that are compatible with grade level standards and sociopolitical teaching expectations.

Conversion of a digital camera into a non-contact colorimeter for use in stone cultural heritage: The application case to Spanish granites

In this study, a digital CMOS camera was calibrated for use as a non-contact colorimeter for measuring the color of granite artworks. The low chroma values of the granite, which yield similar stimulation of the three color channels of the camera, proved to be the most challenging aspect of the task. The appropriate parameters for converting the device-dependent RGB color space into a device-independent color space were established. For this purpose, the color of a large number of Munsell samples (corresponding to the previously defined color gamut of granite) was measured with a digital camera and with a spectrophotometer (reference instrument). The color data were then compared using the CIELAB color formulae. The best correlations between measurements were obtained when the camera works to 10-bits and the spectrophotometric measures in SCI mode. Finally, the calibrated instrument was used successfully to measure the color of six commercial varieties of Spanish granite.

Population synthesis of isolated neutron stars with magneto-rotational evolution – II. From radio-pulsars to magnetars

Population synthesis studies constitute a powerful method to reconstruct the birth distribution of periods and magnetic fields of the pulsar population. When this method is applied to populations in different wavelengths, it can break the degeneracy in the inferred properties of initial distributions that arises from single-band studies. In this context, we extend previous works to include X-ray thermal emitting pulsars within the same evolutionary model as radio-pulsars. We find that the cumulative distribution of the number of X-ray pulsars can be well reproduced by several models that, simultaneously, reproduce the characteristics of the radio-pulsar distribution. However, even considering the most favourable magneto-thermal evolution models with fast field decay, lognormal distributions of the initial magnetic field overpredict the number of visible sources with periods longer than 12 s. We then show that the problem can be solved with different distributions of magnetic field, such as a truncated lognormal distribution, or a binormal distribution with two distinct populations. We use the observational lack of isolated neutron stars (NSs) with spin periods P > 12 s to establish an upper limit to the fraction of magnetars born with B > 1015 G (less than 1 per cent). As future detections keep increasing the magnetar and high-B pulsar statistics, our approach can be used to establish a severe constraint on the maximum magnetic field at birth of NSs.

Phrase-based statistical machine translation: explanation of its processes and statistical models and evaluation of the English to Spanish translations produced

Statistical machine translation (SMT) is an approach to Machine Translation (MT) that uses statistical models whose parameter estimation is based on the analysis of existing human translations (contained in bilingual corpora). From a translation student’s standpoint, this dissertation aims to explain how a phrase-based SMT system works, to determine the role of the statistical models it uses in the translation process and to assess the quality of the translations provided that system is trained with in-domain goodquality corpora. To that end, a phrase-based SMT system based on Moses has been trained and subsequently used for the English to Spanish translation of two texts related in topic to the training data. Finally, the quality of this output texts produced by the system has been assessed through a quantitative evaluation carried out with three different automatic evaluation measures and a qualitative evaluation based on the Multidimensional Quality Metrics (MQM).

Barnstable, Massachusetts 15 Minute Digital Raster Graphic

This layer is a digital raster graphic of the historic 15-minute USGS topographic quadrangle map of Barnstable, Massachusetts. The edition date is 1893 and the map was reprinted in 1907. A digital raster graphic (DRG) is a scanned image of a U.S. Geological Survey (USGS) standard series topographic map, including all map collar information. The image inside the map neatline is geo-referenced to the surface of the earth and fit to the Universal Transverse Mercator projection. The horizontal positional accuracy and datum of the DRG matches the accuracy and datum of the source map. The names of quadrangles which border this one appear on the map collar in their respective positions (N,S,E,W) in relation to this map.