Sensitivity and specificity of parallel or serial serological testing for detection of canine Leishmania infection

In Brazil, human and canine visceral leishmaniasis (CVL) caused by Leishmania infantum has undergone urbanisation since 1980, constituting a public health problem, and serological tests are tools of choice for identifying infected dogs. Until recently, the Brazilian zoonoses control program recommended enzyme-linked immunosorbent assays (ELISA) and indirect immunofluorescence assays (IFA) as the screening and confirmatory methods, respectively, for the detection of canine infection. The purpose of this study was to estimate the accuracy of ELISA and IFA in parallel or serial combinations. The reference standard comprised the results of direct visualisation of parasites in histological sections, immunohistochemical test, or isolation of the parasite in culture. Samples from 98 cases and 1,327 noncases were included. Individually, both tests presented sensitivity of 91.8% and 90.8%, and specificity of 83.4 and 53.4%, for the ELISA and IFA, respectively. When tests were used in parallel combination, sensitivity attained 99.2%, while specificity dropped to 44.8%. When used in serial combination (ELISA followed by IFA), decreased sensitivity (83.3%) and increased specificity (92.5%) were observed. Serial testing approach improved specificity with moderate loss in sensitivity. This strategy could partially fulfill the needs of public health and dog owners for a more accurate diagnosis of CVL.

Algoritmo paralelo para determinação de autovalores de matrizes hermitianas

Dissertação (mestrado)–Universidade de Brasília, Universidade UnB de Planaltina, Programa de Pós-Graduação em Ciência de Materiais, 2015.

Cambios corticales en los dientes anteriores superiores e inferiores con Brackets convencionales, Damon y biofuncional QR en pacientes de trece a veinte y cuatro años

En el mercado existen varios sistemas de tratamiento en ortodoncia, los cuales deben ser estudiados para evitar que causen alteraciones en el periodonto, especialmente en los procesos alveolares corticales, por lo que el objetivo de este estudio fue conocer los cambios óseos alveolares, sean reabsorciones, aposiciones o ningún cambio óseo. Para realizar el estudio, se tomó como muestra tres sistemas de tratamiento: Sistema de Autoligado Damon, Sistema Biofuncional QR y Sistemas Convencionales Roth y MBT, estos brackets se aplicaron en 18 pacientes (seis de cada sistema), los cuales fueron sometidos a una tomografía antes del tratamiento y otra después de finalizada la etapa de alineación y nivelación. En los estudios tomográficos se realizaron trazados para medir en milímetros las corticales alveolares vestibulares, palatina y lingual, de los seis dientes anteriores superiores e inferiores, siendo la muestra total de 216 dientes. Para obtener los resultados del estudio, se ingresaron los datos recolectados en una hoja de cálculo Excel y procesados estadísticamente mediante el software SPSS versión 22, con las pruebas ANOVA y Tukey, obteniendo como resultados en el promedio de reabsorción ósea total p= 0,05 y con el Sistema Biofuncional QR una significancia de p= 0,025, en este último se demostró la presencia de aposición en la cortical lingual mandibular. Se concluyó que todos los sistemas de tratamiento causan reabsorciones óseas, siendo el Sistema Damon el de mayor reabsorción, seguido del Sistema convencional y luego el Sistema Biofuncional QR, produciendo este último una aposición estadísticamente significante. En los dientes anterosuperiores no existieron cambios óseos significativos y en los dientes anteroinferiores las mayores reabsorciones fueron en las piezas 42 y 32 y aposición en la pieza 41

QR-VEY: Una piattaforma software per la creazione di sondaggi basata sulla tecnologia del QR-Code

Le metodologie per la raccolta delle idee e delle opinioni si sono evolute a pari passo con il progresso tecnologico: dalla semplice comunicazione orale si è passati alla diffusione cartacea, fino a che l'introduzione e l'evoluzione di internet non hanno portato alla digitalizzazione e informatizzazione del processo. Tale progresso ha reso possibile l'abbattimento di ogni barriera fisica: se in precedenza la diffusione di un sondaggio era limitata dall'effettiva possibilità di distribuzione del sondaggio stesso, lo sviluppo della rete globale ha esteso tale possibilità (virtualmente) a tutto il mondo. Nonostante sia un miglioramento non indifferente, è importante notare come la valorizzazione della diffusione di un sondaggio abbia inevitabilmente portato a trascurarne le proprietà e i vantaggi intrinsechi legati alla sua diffusione prettamente locale. Ad esempio, un sondaggio che mira a valutare la soddisfazione degli utenti riguardo alla recente introduzione di una nuova linea di laptop ottiene un guadagno enorme dall'informatizzazione, e dunque delocalizzazione, del processo di raccolta dati; dall'altro lato, un sondaggio che ha come scopo la valutazione dell'impatto sui cittadini di un recente rinnovamento degli impianti di illuminazione stradale ha un guadagno pressoché nullo. L'idea alla base di QR-VEY è la ricerca di un ponte tra le metodologie classiche e quelle moderne, in modo da poter sfruttare le proprietà di entrambe le soluzioni. Tale ponte è stato identificato nella tecnologia del QR-Code: è possibile utilizzare un generico supporto che presenti proprietà di localizzazione, come un foglio cartaceo, ma anche un proiettore di una conferenza, come base per la visualizzazione di tale codice, ed associare alla scansione dello stesso funzionalità automatizzate di raccolta di dati e opinioni.

A structure design method for compliant parallel manipulators with actuation isolation

Since precise linear actuators of a compliant parallel manipulator suffer from their inability to tolerate the transverse motion/load in the multi-axis motion, actuation isolation should be considered in the compliant manipulator design to eliminate the transverse motion at the point of actuation. This paper presents an effective design method for constructing compliant parallel manipulators with actuation isolation, by adding the same number of actuation legs as the number of the DOF (degree of freedom) of the original mechanism. The method is demonstrated by two design case studies, one of which is quantitatively studied by analytical modelling. The modelling results confirm possible inherent issues of the proposed structure design method such as increased primary stiffness, introduced extra parasitic motions and cross-axis coupling motions.

Drying of rye (Lolium miltiflorum l.) in fixed bed with parallel air flow.

This work aimed to study the drying of ryegrass seeds (Lolium multiflorum L.) in fixed bed dryer with parallel air flow.

Dynamics of undeactuated cable-driven parallel robots

This thesis focuses on the dynamics of underactuated cable-driven parallel robots (UACDPRs), including various aspects of robotic theory and practice, such as workspace computation, parameter identification, and trajectory planning. After a brief introduction to CDPRs, UACDPR kinematic and dynamic models are analyzed, under the relevant assumption of inextensible cables. The free oscillatory motion of the end-effector (EE), which is a unique feature of underactuated mechanisms, is studied in detail, from both a kinematic and a dynamic perspective. The free (small) oscillations of the EE around equilibria are proved to be harmonic and the corresponding natural oscillation frequencies are analytically computed. UACDPR workspace computation and analysis are then performed. A new performance index is proposed for the analysis of the influence of actuator errors on cable tensions around equilibrium configurations, and a new type of workspace, called tension-error-insensitive, is defined as the set of poses that a UACDPR EE can statically attain even in presence of actuation errors, while preserving tensions between assigned (positive) bounds. EE free oscillations are then employed to conceive a novel procedure aimed at identifying the EE inertial parameters. This approach does not require the use of force or torque measurements. Moreover, a self-calibration procedure for the experimental determination of UACDPR initial cable lengths is developed, which consequently enables the robot to automatically infer the EE initial pose at machine start-up. Lastly, trajectory planning of UACDPRs is investigated. Two alternative methods are proposed, which aim at (i) reducing EE oscillations even when model parameters are uncertain or (ii) eliminate EE oscillations in case model parameters are perfectly known. EE oscillations are reduced in real-time by dynamically scaling a nominal trajectory and filtering it with an input shaper, whereas they can be eliminated if an off-line trajectory is computed that accounts for the system internal dynamics.

Geometrico-static modelling of continuum parallel robots

In this thesis, we explore three methods for the geometrico-static modelling of continuum parallel robots. Inspired by biological trunks, tentacles and snakes, continuum robot designs can reach confined spaces, manipulate objects in complex environments and conform to curvilinear paths in space. In addition, parallel continuum manipulators have the potential to inherit some of the compactness and compliance of continuum robots while retaining some of the precision, stability and strength of rigid-links parallel robots. Subsequently, the foundation of our work is performed on slender beam by applying the Cosserat rod theory, appropriate to model continuum robots. After that, three different approaches are developed on a case study of a planar parallel continuum robot constituted of two connected flexible links. We solve the forward and inverse geometrico-static problem namely by using (a) shooting methods to obtain a numerical solution, (b) an elliptic method to find a quasi-analytical solution, and (c) the Corde model to perform further model analysis. The performances of each of the studied methods are evaluated and their limits are highlighted. This thesis is divided as follows. Chapter one gives the introduction on the field of the continuum robotics and introduce the parallel continuum robots that is studied in this work. Chapter two describe the geometrico-static problem and gives the mathematical description of this problem. Chapter three explains the numerical approach with the shooting method and chapter four introduce the quasi-analytical solution. Then, Chapter five introduce the analytic method inspired by the Corde model and chapter six gives the conclusions of this work.