Natural cone formation for fast ignition of laser fusion

We propose to utilize the leading pulse of a petawatt class laser to create a conic plasma channel in the dense plasmas. This plasma channel could serve as a natural cone to guide the main pulse to the cone tip, as behaves similarly to the physical Au cone. We estimate that the leading pulse of a petawatt laser could create a natural cone with cone tip only about 100 mu m away from the edge of compressed core plasma. The natural cone formation should be compatible for a good uniform compression and efficient fast heating of the imploded fuel.

The impact of liberalizing cost-saharing on basic models of network formation

This paper studies the impact of "liberalizing " the cost-sharing of links on some basic models of network formation. This is done in a setting where both doubly supported and singly supported links are possible, and which includes the two seminal models of network formation by Jackson and Wolinsky and Bala and Goyal as extreme cases. In this setting, the notion of pairwise stability is extended and it is proved that liberalizing cost-sharing for doubly supported links widens the range of values of the parameters where the efficient networks formed by such type of links are pairwise stable, while the range of values of the parameters where the efficient networks formed by singly supported links are pairwise stable shrinks, but the region where the latter are e¢ cient and pairwise stable remains the same.

Synthesis and formation mechanism of silver nanowires by a templateless and seedless method

Silver nanowires in large quantities can be obtained through a simple method in the absence of a surfactant or polymer and without addition of external seeding nanocrystallites. A plausible mechanism was proposed to elucidate the formation mechanism of silver nanowires based on TEM studies.

Formation and characterization of tin oxide aerogel derived from sol-gel process based on tetra(n-butoxy)tin(IV)

Transparent and translucent SnO2 aerogels with high specific surface area (>300m(2)/g) have been prepared by sol-gel process using tetra(n-butoxy)tin(IV) as a starting compound, and supercritical drying technique for solvent extraction. Light scattering measurements reveal that the polymeric cluster size distribution in sol system is gradually broadened during sol-gel transition. SEM images show that the aerogels are made up of the cottonlike oxide agglomerates with a large number of Pores. TEM images show that these aerogels seem to be self-similar at different magnifications. Their pore size distribution is pretty wide ranging, from mesopore to macropore especially for that of translucent aerogel. (C) 2004 Elsevier B.V. All rights reserved.

Transverse mode formation in longitudinally pumped miniature slab lasers

The formation of transverse modes in longitudinally pumped miniature slab lasers is investigated theoretically and experimentally. The longitudinally non-uniform gain-guiding is studied by expanding the electric field into the Hermite-Gaussian functions that satisfy boundary conditions of the resonator. Non-Gaussian transversal beam profiles in the near field are found and the beam diameter is reduced when the pump spot becomes smaller. The experimental observation agrees with the theoretical calculation.

Modular Multimodal Iron Oxide-Based Nanocarriers for Image-Guided dsRNA Immunostimulation and Platinum Anticancer Drug Design

237 p.

Self-formation of quasiperiodic void structure in CaF2 induced by femtosecond laser irradiation

We report the self-formation of quasiperiodic void structure with the length of several hundred micrometers inside the CaF2 crystal. The quasiperiodical voids along the propagation direction of the laser beam were formed spontaneously after the irradiation of a single femtosecond laser beam which was focused at a fixed point inside the crystal sample. The length of the void array varied with the focal depth beneath the sample surface. The possible mechanism of the self-formed void structure was discussed. (c) 2007 American Institute of Physics.

Formation, thermal, optical and physical properties of GeS2-Ga2S3-AgCl novel chalcohalide glasses

Novel GeS2-Ga2S3-AgCl chalcohalide glasses had been prepared by melt-quenching technique, and the glass-forming region was determined by XRD, which indicated that the maximum of dissolvable AgCl was up to 65 mol%. Thermal and optical properties of the glasses were studied by differential scanning calorimetry (DSC) and Visible-IR transmission, which showed that most of GeS2-Ga2S3-AgCl glasses had strong glass-forming ability and broad region of transmission (about 0.45-12.5 mu m). With the addition of AgCl, the glass transition temperature, Tg decreases distinctly, and the short-wavelength cut-off edge (lambda(vis)) of the glasses also shifts to the long wavelength gradually. However, the glass-forming ability of the glass has a complicated evolutional trend depended on the compositional change. In addition, the values of the Vickers microhardness, H (v) , which decrease with the addition of AgCl, are high enough for the practical applications. These excellent properties of GeS2-Ga2S3-AgCl glasses make them potentially applied in the optoelectronic field, such as all-optical switch, etc.

Formation of array microstructures on silicon by multibeam interfered ferntosecond laser pulses

We report on an optical interference method to fabricate array microstructures on the surface of silicon wafers by means of five-beam interference of femtosecond laser pulses. Optical microscope and scanning electron microscope observations revealed microstructures with micrometer-order were fabricated. The diffraction characteristics of the fabricated structures were evaluated. The present technique allows one-step realization of functional optoelectronic devices on silicon surface. (C) 2004 Elsevier B.V. All rights reserved.

Catalisadores para hidroisomerização de n-hexadecano

No processo de hidrocraqueamento para a produção de lubrificantes ocorre a formação de uma corrente rica em compostos parafínicos que possuem alto ponto de fluidez, apesar dos mesmos apresentarem excelentes desempenhos em termos de estabilidade térmica e oxidativa. A transformação das n-parafinas obtidas nestas correntes em isoparafinas e compostos naftênicos, os quais possuem menores pontos de fluidez, se faz necessária a fim de enquadrar esta propriedade. Uma das rotas catalíticas mais importantes neste sentido é a hidroisodesparafinação ou HIDW (hydroisodewaxing) que consiste na conversão de n-parafinas nas respectivas isoparafinas, onde são empregados catalisadores bifuncionais zeolíticos com a ocorrência de seletividade de forma. No caso dos catalisadores industriais, se faz necessária a dispersão da fase metálica e da zeólita em uma matriz amorfa para viabilizar sua conformação e melhorar a resistência mecânica do catalisador final. Neste cenário, o objetivo deste trabalho foi preparar e analisar o desempenho de uma série de catalisadores à base de zeólita beta inseridos numa matriz de alumina, variando-se o teor de zeólita e o tipo de precursor de Pt utilizado. Os catalisadores foram avaliados na reação de hidroisomerização de um composto modelo, no caso, n-hexadecano. Os testes realizados para avaliação da atividade e seletividade foram conduzidos em um reator de fluxo contínuo em alta pressão e fase líquida em unidade de laboratório. Os catalisadores foram testados em condições operacionais que proporcionassem uma ampla faixa de conversões do n-C16. Verificou-se que as atividades dos catalisadores foram proporcionais ao teor de zeólita no catalisador, indicando que a função ácida, neste catalisador bifuncional, é a etapa limitante do processo. Quanto à natureza do precursor de Pt, o catalisador preparado com ácido cloroplatínico foi sensivelmente mais ativo que os preparados com o complexo aminplatina. No entanto, para todos os catalisadores, a distribuição de produtos em função da conversão foi similar, independente do teor de zeólita e da natureza do precursor de platina. Foi também determinado o ponto de fluidez de uma série de produtos de reação, obtendo-se valores entre 17,5 C (n-hexadecano) e - 41 C (produto com 98% de conversão). Obteve-se uma boa correlação entre o ponto de fluidez e a composição dos produtos, considerando-se a presença de isômeros mono, di e tri-substituídos e compostos de menor peso molecular que C16