Construction and demolition waste as a source of PVC for recycling

Construction and demolition waste can contain considerable amounts of polyvinyl chloride (PVC). This paper describes a study of the recycling of PVC pipes collected from such waste materials. In a sorting facility for the specific disposal of construction and demolition waste, PVC was found to represent one-third of the plastics separated by workers. Pipes were sorted carefully to preclude any possible contamination by poly(ethylene terephthalate) (PET) found in the waste. The material was ground into two distinct particle sizes (final mesh of 12.7 and 8 mm), washed, dried and recycled. The average formulation of the pipes was determined based on ash content tests and used in the fabrication of a similar compound made mainly of virgin PVC. Samples of recycled pipes and of compound based on virgin material were subjected to tensile and impact tests and provided very similar results. These results are a good indication of the application potential of the recycled material and of the fact that longer grinding to obtain finer particles is not necessarily beneficial.

Estudo morfológico da blenda polimérica poli(metacrilato de metila)/poli(tereftalato de etileno) reciclado (PMMA/PET)

Among the options for plastics modification more convenient, both from a technical-scientific and economic, is the development of polymer blends by processing in the molten state. This work was divide into two stages, with the aim to study the phase morphology of binary blend PMMA / PET blend and this compatibilized by the addition of the poly(methyl methacrylate-co-glycidyl methacrylate-co-ethyl acrylate) copolymer (MMA-GMA-EA). In the first stage is analyzed the morphology of the blend at a preliminary stage where we used the bottle-grade PET in a Haake torque rheometer and the effect of compatibilizer in this blend was evaluated. In the second stage the blend was processed using the recycled PET in a single screw extruder and subsequently injection molding in the shape of specimens for mechanical tests. In both stages we used a transmission electron microscopy (TEM) to observe the morphologies of the samples and an image analyzer to characterize them. In the second stage, as well as analysis by TEM, tensile test, scanning electron microscopy (SEM) and atomic force microscopy (AFM) was performed to correlate the morphology with the mechanical properties. The samples used in morphological analyzes were sliced by cryo-ultramicrotomy technique for the analysis by TEM and the analysis by SEM and AFM, we used the flat face of the block after cut cryogenic. It was found that the size of the dispersed phase decreased with the addition of MMA-GMA-EA in blends prepared in a Haake. In the tensile test, the values of maximum tensile strength and modulus of elasticity is maintained in a range between the value of pure PMMA the pure PET, while the elongation at break was influenced by the composition by weight of the PMMA mixture. The coupling agent corroborated the results presented in the blend PMMA / PETrec / MMA-GMA-EA (80/15/5 %w/w), obtained by TEM, AFM and SEM. It was concluded that the techniques used had a good morphologic correlation, and can be confirmed for final analysis of the morphological characteristics of the blends PMMA / PET

La imagen en el discurso multimodal cortazariano, una poética en movimiento

The selection and proposed cortazarian image in multimodal speech, a poetic moving as a doctoral thesis title, is the result of a process that forms several progressive stages. more than satisfy our curiosity and literary artistic concerns, the questions multiply increases our desire to bring more creative Cortazarian the colossus, that not only ruins a way of making literature , but in its revolutionary labyrinth gives a turn of the screw to the already tangled world of artistic writing , breaking in 1967 with the first of four hybrids books, La vuelta al día en ochenta mundos through which converts the traditional plastic unitextual and unimodal space in a palempsesto inexhaustible generator senses and meanings. Far from appeasing the wrath of conservative critics, caused by his narrative masterpiece, Hopscotch (1963), sparked the debate to denounce the regression of the classic molds of writing, proposing the imagination as the setting for creative freedom, it is not as arbitrary and nonsense, but as a process of higher state of consciousness in which it operates an underlying logic. Hence, our objective is to crawl into the underworld and plastics other multisígnicas border spaces, fleeting and ephemeral alliances that relate not just as complementary and similar texts which may be the same speech and can transmit the same, but quite the contrary, the oft-repeated notion of analogy is the first victim, fortunately, this kind of creative-artistic operations that raise the creative act to a sublime state capable of converting the inexhaustible multitextuales constellations in different ways: opposition, confrontation, invasion, dialogue, shadow, duplication, theft, etc. However this multiple transgression pushed to the limit by Julio Cortazar and his friend Julio Silva through four books proposed for analysis often does not translate into jobs and research in literature departments of the universities of the world, nor the critics are echoes the striking abundance and clarity of expression multimodal phenomenon as is the case with other works of Cortazar unimodal type, which makes it impassable fences mysterious worlds...

Les macro-déchets en mer

This text presents the general problem of nuisance and pollution created by macro-waste at sea. We clarify three main types of pollution: that of coasts, that of the sea bed and that of the open sea. The article leans on scientific data: report of the state of contamination of the coasts of France by macro waste (1982), results of works and oceanographic sea bed observation campaigns, evaluation of the contamination by micro-plastics floating on surface and concentrating in the big oceanic gyres. A paragraph is dedicated to the impacts on the ecosystems, an other one on the taken measures to fight against those macro-waste. The specific case of New Caledonia is not forgotten and in conclusion we underline the necessity of an education of the populations in terms of Eco responsibility, which appears to be a significant factor of regression of this type of nuisance that affects all the seas of the world

Processamento e caracterização de compósitos Poli(METACRILATO DE METILA)/Sílica (PMMA/SiO2)

Currently the search for new materials with properties suitable for specific applications has increased the number of researches that aim to address market needs. The poly (methyl methacrylate) (PMMA) is one of the most important polymers of the family of polyacrylates and polymethacrylates, especially for its unique optical properties and weathering resistance, and exceptional hardness and gloss. The development of polymer composites by the addition of inorganic fillers to the PMMA matrix increases the potential use of this polymer in various fields of application. The most commonly used inorganic fillers are particles of silica (SiO2), modified clays, graphite and carbon nanotubes. The main objective of this work is the development of PMMA/SiO2 composites at different concentrations of SiO2, for new applications as engineering plastics. The composites were produced by extrusion of tubular film, and obtained via solution for application to commercial PMMA plates, and also by injection molding, for improved the abrasion and scratch resistance of PMMA without compromising transparency. The effects of the addition of silica particles in the polymer matrix properties were evaluated by the maximum tensile strength, hardness, abrasion and scratch resistance, in addition to preliminary characterization by torque rheometry and melt flow rate. The results indicated that it is possible to use silica particles in a PMMA matrix, and a higher silica concentration produced an increase of the abrasion and scratch resistance, hardness, and reduced tensile strength

Investigation of capacitive discharge heating of metallic glasses

In recent years, the discovery of bulk metallic glasses with exceptional properties has generated much interest. One of their most intriguing features is their capacity for viscous flow above the glass transition temperature. This characteristic allows metallic glasses to be formed like plastics at modest temperatures. However, crystallization of supercooled metallic liquids in the best bulk metallic glass-formers is much more rapid than in most polymers and silicate glass-forming liquids. The short times to crystallization impairs experimentation on and processing of supercooled glass-forming metallic liquids. A technique to rapidly and uniformly heat metallic glasses at rates of 10⁵ to 10⁶ kelvin per second is presented. A capacitive discharge is used to ohmically heat metallic glasses to temperatures in the super cooled liquid region in millisecond time-scales. By heating samples rapidly, the most time-consuming step in experiments on supercooled metallic liquids is reduced orders of magnitude in length. This allows for experimentation on and processing of metallic liquids in temperature ranges that were previously inaccessible because of crystallization.

A variety of forming techniques, including injection molding and forging, were coupled with capacitive discharge heating to produce near net-shaped metallic glass parts. In addition, a new forming technique, which combines a magnetic field with the heating current to produce a forming force, was developed. Viscosities were measured in previously inaccessible temperature ranges using parallel plate rheometry combined with capacitive discharge heating. Lastly, a rapid pulse calorimeter was developed with this technique to investigate the thermophysical behavior of metallic glasses at these rapid heating rates.

Plásticos reforçados a base de tecidos híbridos: efeitos da anisotropia e geometria normativa na caracterização mecânica e da fratura

As most current studies, reinforced plastics have been, in recent years, a viable alternative in building structural elements of medium and large, since the lightness accompanied by high performance possible. The design of hybrid polymer composites (combination of different types of reinforcements) may enable structural applications thereof, facing the most severe service conditions. Within this class of composite materials, reinforced the underlying tissues hybrid high performance are taking space when your application requires high load bearing and high rigidity. The objective of this research work is to study the challenges in designing these fabrics bring these materials as to its mechanical characterization and fracture mechanisms involved. Some parameters associated with the process and / or form of hybridization stand out as influential factors in the final performance of the material such as the presence of anisotropy, so the fabric weave, the process of making the same, normative geometry of the specimens, among others. This sense, four laminates were developed based hybrid reinforcement fabrics involving AS4 carbon fiber, kevlar and glass 49-E as the matrix epoxy vinyl ester resin (DERAKANE 411-350). All laminates were formed each with four layers of reinforcements. Depending on the hybrid fabric, all the influencing factors mentioned above have been studied for laminates. All laminates were manufactured industrially used being the lamination process manual (hand-lay-up). All mechanical characterization and study of the mechanism of fracture (fracture mechanics) was developed for laminates subjected to uniaxial tensile test, bending in three and uniaxial compression. The analysis of fracture mechanisms were held involving the macroscopic, optical microscopy and scanning electron microscopy

White-faced storm-petrels Pelagodroma marina predated by gulls as biological monitors of plastic pollution in the pelagic subtropical northeast atlantic

Marine plastic pollution is rapidly growing and is a source of major concern. Seabirds often ingest plastic debris and are increasingly used as biological monitors of plastic pollution. However, virtually no studies have assessed plastics in seabirds in the deep subtropical North Atlantic. We investigated whether remains of white-faced storm-petrels (WFSP) present in gull pellets could be used for biomonitoring. We analysed 263 pellets and 79.0% of these contained plastic debris originating in the digestive tract of WFSP. Pellets with no bird prey did not contain plastics. Most debris were fragments (83.6%) with fewer plastic pellets (8.2%). Light-coloured plastics predominated (71.0%) and the most frequent polymer was HDPE (73.0%). Stable isotopes in toe-nails of WFSP containing many versus no plastics did not differ, indicating no individual specialisation leading to differential plastic ingestion. We suggest WFSP in pellets are highly suitable to monitor the little known pelagic subtropical Northeast Atlantic.

Impacto de la innovación tecnológica en las estrategias de YouTube y Google

El concepto de administración ha venido cambiando constantemente a través del tiempo y de las ideologías de diferentes autores que han marcado dicho concepto, en donde se ha podido establecer de mejor forma el significado que ésta ciencia tiene con la innovación y la estrategia. El objetivo de este trabajo es mostrar los fundamentos teóricos de la administración, la innovación y la estrategia, para así mostrar los alcances e impactos que estos tienen en las organizaciones visitadas durante la misión empresarial al Silicon Valley, principalmente a YouTube y Google. Para cumplir con dicho objetivo se realizaron encuestas a diferentes trabajadores pertenecientes a las organizaciones, obteniendo así, información valiosa para el estudio realizado. Con la información obtenida de la entrevistas, se logró recopilar información pertinente que permitió concluir que la innovación es un pilar fundamental para el buen funcionamiento de las empresas pertenecientes al Silicon Valley y así mismo ser base indispensable para la creación y formulación de las principales estrategias de las empresas.

Prevalencia de morbilidad osteomuscular en una empresa de servicios de seguridad electrónica en Bogotá, 2013

Introducción: actualmente los trastornos músculo esqueléticos (TME) han sido reconocidos como la principal causa de morbilidad en el trabajo, dado el porcentaje de ausentismo laboral que representa, generando reducción en la productividad de las industrias. Una visión general de la prevalencia en TME puede conducir a métodos de prevención de morbilidad adecuados para cada tipo de proceso, y así proporcionar un ambiente más seguro y confortable. Objetivo: determinar la prevalencia de síntomas osteomusculares y su relación con factores individuales y laborales en personal de una empresa dedicada a prestar servicio de seguridad electrónica en Bogotá, en el 2013. Métodos: estudio de corte transversal, desarrollado a partir de fuentes de datos secundarios de una población de 199 trabajadores, con información sociodemográfica y síntomas osteomusculares en los distintos roles laborales (administrativo, soporte y de campo) de una empresa de servicios en seguridad electrónica. Se usaron métodos estadísticos para el cálculo de proporciones, se estimaron las prevalencias osteomusculares globales, realizando comparaciones por rol laboral. La revisión de la asociación entre factores sociodemográficos y laborales con síntomas de TME se hizo a través de la prueba Chi2 de asociación o prueba exacta de Fisher. Resultados: Los segmentos que mostraron la mayor frecuencia en morbilidad de TME fueron espalda, cuello, muñecas y manos. Se encontró asociación entre dolor de hombros y brazos con la edad, OR=0,54 (IC95%=0,30-0,95) y tiempo en el cargo, OR=1,855(IC 95%=1,043-3,297); entre dolor de cuello y edad OR=0,50 (IC95%=0,27-0,90) y entre dolor de muñecas y/o manos con tiempo en el cargo, OR=1,827(IC 95%=1,032-3,235). Conclusión: Se presenta morbilidad por TME en varios segmentos, derivados de factores (individuales y laborales), ratificando la importancia de hacer intervenciones integrales de control de riesgos para su prevención.

Non-invasive methodology for the identification of plastic pieces in museum environment – a novel approach

The preservation of modern and contemporary art and costume collections in museums requires a complete understanding of their constituent materials which are often synthetic or semi-synthetic polymers. An extraordinary amount of quality information can be gained from instrumental techniques, but some of them have the disadvantage of being destructive. This paper presents a new totally integrated non-invasive methodology, for the identification of polymers and their additives, on plastic artefacts in museums. NMR (nuclear magnetic resonance) and in-situ FTIR-ATR (attenuated total reflection infrared spectroscopy) combination allowed the full characterization of the structure of thesematerials and correct identification of each one. The NMR technique applied to leached surface exudates identified unequivocally a great number of additives, exceeding the Py–GC–MS analysis of micro-fragments in number and efficiency. Additionally, in-situ FTIR-ATR provided exactly the same information of the destructive μ-FTIR about the polymer structure and confirmed the presence of some additives. Eight costume pieces (cosmetic boxes and purses), dating to the beginning of the 20th century and belonging to the Portuguese National Museum of Costume and Fashion, were correctly identified with this new integrated methodology, as beingmade of plastics derived fromcellulose acetate or cellulose nitrate polymers, contradicting the initial information that these pieces were made of Bakelite. The identification of a surprisingly large number of different additives forms an added value of this methodology and opens a perspective of a quick and better characterization of plastic artefacts in museum environments.

Materiais electrocrómicos e mecaelectroquímicos: contextualização e experimentação na disciplina de química do 12º ano

Durante os últimos 1O anos, em particular, tem-se assistido à descoberta e desenvolvimento de materiais com propriedades únicas e potencialmente úteis em vários domínios da Ciência e Tecnologia. Quer seja na área das Ciências Biomédicas e do Ambiente, na área das Novas Tecnologias de Informação e Comunicação ou nas Novas Tecnologias relacionadas com sistemas de Conversão e Armazenamento de Energia Eléctrica, encontram-se inúmeros exemplos de Novos Materiais com propriedades muito interessantes, e cujas aplicações inovadoras podem revolucionar o nosso Mundo. O presente trabalho é uma proposta de contextualização e experimentação do tema "Materiais Electrocrómicos e Mecaelectroquímicos" no Programa de Química de 12° Ano, nomeadamente na terceira Unidade - Plásticos, Vidros e Novos Materiais. Neste, é apresentada uma sub-unidade que possa integrar a unidade referida. Faz-se especial referência às aplicações dos polímeros condutores, que pela sua inovação e actualidade tomam a leccionação do tema mais apelativa, interessante e facilitadora de uma literacia científica. São apresentadas experiências laboratoriais demonstrativas e elucidativas do tema em questão. Como forma de apoiar a leccionação do referido tema, é apresentada a proposta de uma animação gráfica animada em Power Point. ABSTRACT: During the past 1O years, in particular, it has witnessed to the discovery and development of materials with unique properties and potentially useful in various fields of Science and Technology. There are numerous examples of new materials in different areas, such as Biomedical, Energy and Environmental Sciences and New information and Communication Technologies, with very interesting properties, and whose innovative applications can have an outstanding impact in our world. This dissertation is a proposal of contextualization and experimentation of theme "Electrochromic Materials and Electrochemical Artificial Muscles" in the Program of Chemistry, in 12th year, particularly in the third unit - Plastics, Glass and New Materials. lt will present a sub-unit that can integrate the unit above. The definitions and some applications of the Electrochromic Materials and Electrochemical Artificial Muscles are showed. Demonstrative and illustrative laboratory experiments of the theme are proposed. ln order to support the teaching of that subject, it is presented an animated graphical presentation in Power Point.