Annotated record of the detailed examination of Mn deposits from C.S.S. Hudson Cruise 19 (1967) stations

The Bedford Institute of Oceanography provided ship time on the C.S.S. Hudson during the B.I.0. 1967 Metrology and IODAL Cruise for surveying two separate bottom features in the North Atlantic; the Flemish Cap and the San Pablo Seamount one of the Kelvin Seamounts (also known as the New England Seamounts) about 400 miles SSE of Halifax, Nova Scotia. Underwater photography, dredging, and drilling showed San Pablo seamount to have a very considerable covering of manganese deposit, which may be recoverable by mining. San Pablo Seamount was surveyed and sampled; good hauls were made both on the top and on the slopes, at various depths from 500-1000 fathoms; in all cases samples of an unusual stratified manganese-iron ore were recovered. In the hope of gaining additional information in the immediate sample area, one of the dredges had been previously modified to accommodate underwater photographic equipment. X-ray chemical analyses indicate that the ore contains 20 to 25 per cent MnO2, with similar amounts of Fe2O3. Since bottom photographs indicate that these deposits form a continuous cover 1 foot to 3 feet thick over most of the seamount, it is estimated that there are ore reserves in the order of 10 to 30 M tons above 1,000 fathoms.

Ablation of Steel by Microsecond Pulse Trains

Laser micromachining is an important material processing technique used in industry and medicine to produce parts with high precision. Control of the material removal process is imperative to obtain the desired part with minimal thermal damage to the surrounding material. Longer pulsed lasers, with pulse durations of milli- and microseconds, are used primarily for laser through-cutting and welding. In this work, a two-pulse sequence using microsecond pulse durations is demonstrated to achieve consistent material removal during percussion drilling when the delay between the pulses is properly defined. The light-matter interaction moves from a regime of surface morphology changes to melt and vapour ejection. Inline coherent imaging (ICI), a broadband, spatially-coherent imaging technique, is used to monitor the ablation process. The pulse parameter space is explored and the key regimes are determined. Material removal is observed when the pulse delay is on the order of the pulse duration. ICI is also used to directly observe the ablation process. Melt dynamics are characterized by monitoring surface changes during and after laser processing at several positions in and around the interaction region. Ablation is enhanced when the melt has time to flow back into the hole before the interaction with the second pulse begins. A phenomenological model is developed to understand the relationship between material removal and pulse delay. Based on melt refilling the interaction region, described by logistic growth, and heat loss, described by exponential decay, the model is fit to several datasets. The fit parameters reflect the pulse energies and durations used in the ablation experiments. For pulse durations of 50 us with pulse energies of 7.32 mJ +/- 0.09 mJ, the logisitic growth component of the model reaches half maximum after 8.3 us +/- 1.1 us and the exponential decays with a rate of 64 us +/- 15 us. The phenomenological model offers an interpretation of the material removal process.

Design of Transparent Conducting Electrodes and Surface Relief Gratings for Plasmonic Polymer Solar Cells

As the concept of renewable energy becomes increasingly important in the modern society, a considerable amount of research has been conducted in the field of organic photovoltaics in recent years. Although organic solar cells generally have had lower efficiencies compared to silicon solar cells, they have the potential to be mass produced via solution processing. A common polymer solar cell architecture relies on the usage of P3HT (electron donor) and PCBM (electron acceptor) bulk heterojunction. One of the main issues with this configuration is that in order to compensate for the high exciton recombination rate, the photoactive layer is often made very thin (on the order of 100 $%). This results in low solar cell photocurrents due to low absorption. This thesis investigates a novel method of light trapping by coupling surface plasmons at the electrode interface via surface relief gratings, leading to EM field enhancements and increased photo absorption. Experimental work was first conducted on developing and optimizing a transparent electrode of the form &'()/+,/&'() to replace the traditional ITO electrode since the azopolymer gratings cannot withstand the high temperature processing of ITO films. It was determined that given the right thickness profiles and deposition conditions, the MAM stack can achieve transmittance and conductivity similar to ITO films. Experimental work was also conducted on the fabrication and characterization of surface relief gratings, as well as verification of the surface plasmon generation. Surface relief gratings were fabricated easily and accurately via laser interference lithography on photosensitive azopolymer films. Laser diffraction studies confirmed the grating pitch, which is dependent on the incident angle and wavelength of the writing beam. AFM experiments were conducted to determine the surface morphology of the gratings, before and after metallic film deposition. It was concluded that metallic film deposition does not significantly alter the grating morphologies.

Design of Transparent Conducting Electrodes and Surface Relief Gratings for Plasmonic Polymer Solar Cells

As the concept of renewable energy becomes increasingly important in the modern society, a considerable amount of research has been conducted in the field of organic photovoltaics in recent years. Although organic solar cells generally have had lower efficiencies compared to silicon solar cells, they have the potential to be mass produced via solution processing. A common polymer solar cell architecture relies on the usage of P3HT (electron donor) and PCBM (electron acceptor) bulk heterojunction. One of the main issues with this configuration is that in order to compensate for the high exciton recombination rate, the photoactive layer is often made very thin (on the order of 100 $%). This results in low solar cell photocurrents due to low absorption. This thesis investigates a novel method of light trapping by coupling surface plasmons at the electrode interface via surface relief gratings, leading to EM field enhancements and increased photo absorption. Experimental work was first conducted on developing and optimizing a transparent electrode of the form &'()/+,/&'() to replace the traditional ITO electrode since the azopolymer gratings cannot withstand the high temperature processing of ITO films. It was determined that given the right thickness profiles and deposition conditions, the MAM stack can achieve transmittance and conductivity similar to ITO films. Experimental work was also conducted on the fabrication and characterization of surface relief gratings, as well as verification of the surface plasmon generation. Surface relief gratings were fabricated easily and accurately via laser interference lithography on photosensitive azopolymer films. Laser diffraction studies confirmed the grating pitch, which is dependent on the incident angle and wavelength of the writing beam. AFM experiments were conducted to determine the surface morphology of the gratings, before and after metallic film deposition. It was concluded that metallic film deposition does not significantly alter the grating morphologies.

Development of An Enhanced Oil Sands Fluid Tailings Generation Model

Bitumen extraction from surface-mined oil sands results in the production of large volumes of Fluid Fine Tailings (FFT). Through Directive 085, the Province of Alberta has signaled that oil sands operators must improve and accelerate the methods by which they deal with FFT production, storage and treatment. This thesis aims to develop an enhanced method to forecast FFT production based on specific ore characteristics. A mass relationship and mathematical model to modify the Forecasting Tailings Model (FTM) by using fines and clay boundaries, as the two main indicators in FFT accumulation, has been developed. The modified FTM has been applied on representative block model data from an operating oil sands mining venture. An attempt has been made to identify order-of-magnitude associated tailings treatment costs, and to improve financial performance by not processing materials that have ultimate ore processing and tailings storage and treatment costs in excess of the value of bitumen they produce. The results on the real case study show that there is a 53% reduction in total tailings accumulations over the mine life by selectively processing only lower tailings generating materials through eliminating 15% of total mined ore materials with higher potential of fluid fines inventory. This significant result will assess the impact of Directive 082 on mining project economic and environmental performance towards the sustainable development of mining projects.

Capital 2.0 capital formation and legal risk in a new global economic order from fiat to exit: including case studies of the proposed transatlantic trade and investment partnership between the United States and the European Union and the financing relation between the United States and the People’s Republic of China

Following the intrinsically linked balance sheets in his Capital Formation Life Cycle, Lukas M. Stahl explains with his Triple A Model of Accounting, Allocation and Accountability the stages of the Capital Formation process from FIAT to EXIT. Based on the theoretical foundations of legal risk laid by the International Bar Association with the help of Roger McCormick and legal scholars such as Joanna Benjamin, Matthew Whalley and Tobias Mahler, and founded on the basis of Wesley Hohfeld’s category theory of jural relations, Stahl develops his mutually exclusive Four Determinants of Legal Risk of Law, Lack of Right, Liability and Limitation. Those Four Determinants of Legal Risk allow us to apply, assess, and precisely describe the respective legal risk at all stages of the Capital Formation Life Cycle as demonstrated in case studies of nine industry verticals of the proposed and currently negotiated Transatlantic Trade and Investment Partnership between the United States of America and the European Union, TTIP, as well as in the case of the often cited financing relation between the United States and the People’s Republic of China. Having established the Four Determinants of Legal Risk and its application to the Capital Formation Life Cycle, Stahl then explores the theoretical foundations of capital formation, their historical basis in classical and neo-classical economics and its forefathers such as The Austrians around Eugen von Boehm-Bawerk, Ludwig von Mises and Friedrich von Hayek and most notably and controversial, Karl Marx, and their impact on today’s exponential expansion of capital formation. Starting off with the first pillar of his Triple A Model, Accounting, Stahl then moves on to explain the Three Factors of Capital Formation, Man, Machines and Money and shows how “value-added” is created with respect to the non-monetary capital factors of human resources and industrial production. Followed by a detailed analysis discussing the roles of the Three Actors of Monetary Capital Formation, Central Banks, Commercial Banks and Citizens Stahl readily dismisses a number of myths regarding the creation of money providing in-depth insight into the workings of monetary policy makers, their institutions and ultimate beneficiaries, the corporate and consumer citizens. In his second pillar, Allocation, Stahl continues his analysis of the balance sheets of the Capital Formation Life Cycle by discussing the role of The Five Key Accounts of Monetary Capital Formation, the Sovereign, Financial, Corporate, Private and International account of Monetary Capital Formation and the associated legal risks in the allocation of capital pursuant to his Four Determinants of Legal Risk. In his third pillar, Accountability, Stahl discusses the ever recurring Crisis-Reaction-Acceleration-Sequence-History, in short: CRASH, since the beginning of the millennium starting with the dot-com crash at the turn of the millennium, followed seven years later by the financial crisis of 2008 and the dislocations in the global economy we are facing another seven years later today in 2015 with several sordid debt restructurings under way and hundred thousands of refugees on the way caused by war and increasing inequality. Together with the regulatory reactions they have caused in the form of so-called landmark legislation such as the Sarbanes-Oxley Act of 2002, the Dodd-Frank Act of 2010, the JOBS Act of 2012 or the introduction of the Basel Accords, Basel II in 2004 and III in 2010, the European Financial Stability Facility of 2010, the European Stability Mechanism of 2012 and the European Banking Union of 2013, Stahl analyses the acceleration in size and scope of crises that appears to find often seemingly helpless bureaucratic responses, the inherent legal risks and the complete lack of accountability on part of those responsible. Stahl argues that the order of the day requires to address the root cause of the problems in the form of two fundamental design defects of our Global Economic Order, namely our monetary and judicial order. Inspired by a 1933 plan of nine University of Chicago economists abolishing the fractional reserve system, he proposes the introduction of Sovereign Money as a prerequisite to void misallocations by way of judicial order in the course of domestic and transnational insolvency proceedings including the restructuring of sovereign debt throughout the entire monetary system back to its origin without causing domino effects of banking collapses and failed financial institutions. In recognizing Austrian-American economist Schumpeter’s Concept of Creative Destruction, as a process of industrial mutation that incessantly revolutionizes the economic structure from within, incessantly destroying the old one, incessantly creating a new one, Stahl responds to Schumpeter’s economic chemotherapy with his Concept of Equitable Default mimicking an immunotherapy that strengthens the corpus economicus own immune system by providing for the judicial authority to terminate precisely those misallocations that have proven malignant causing default perusing the century old common law concept of equity that allows for the equitable reformation, rescission or restitution of contract by way of judicial order. Following a review of the proposed mechanisms of transnational dispute resolution and current court systems with transnational jurisdiction, Stahl advocates as a first step in order to complete the Capital Formation Life Cycle from FIAT, the creation of money by way of credit, to EXIT, the termination of money by way of judicial order, the institution of a Transatlantic Trade and Investment Court constituted by a panel of judges from the U.S. Court of International Trade and the European Court of Justice by following the model of the EFTA Court of the European Free Trade Association. Since the first time his proposal has been made public in June of 2014 after being discussed in academic circles since 2011, his or similar proposals have found numerous public supporters. Most notably, the former Vice President of the European Parliament, David Martin, has tabled an amendment in June 2015 in the course of the negotiations on TTIP calling for an independent judicial body and the Member of the European Commission, Cecilia Malmström, has presented her proposal of an International Investment Court on September 16, 2015. Stahl concludes, that for the first time in the history of our generation it appears that there is a real opportunity for reform of our Global Economic Order by curing the two fundamental design defects of our monetary order and judicial order with the abolition of the fractional reserve system and the introduction of Sovereign Money and the institution of a democratically elected Transatlantic Trade and Investment Court that commensurate with its jurisdiction extending to cases concerning the Transatlantic Trade and Investment Partnership may complete the Capital Formation Life Cycle resolving cases of default with the transnational judicial authority for terminal resolution of misallocations in a New Global Economic Order without the ensuing dangers of systemic collapse from FIAT to EXIT.

Magnetic properties contribution to the identification and provenance of marine sediments: distal IRD in the Galicia Interior Basin (NW Spain)

This paper discusses the advantages of using a combined environmagnetic and geochemical approach to the provenance and characterization of distal IRDs occurring during the Last Glacial Period in core CI12PC3 from the Galicia Interior Basin (GIB). Six Heinrich layers (HL1-6) have been identified in the area in base to the detection of distinct populations of exotic magnetic mineral assemblages alien to the local/regional sedimentation environment. Their extension has been determined by Ca/Sr and Si/Sr ratios and their provenance by 143Nd/144Nd and 87Sr/86Sr isotopic ratios and FORCs. The sedimentary expression of HL is characterized by the presence of distal Ice Rafted Detritus (IRD). Distal IRD magnetic signatures in the GIB consist of (i) an increase of one order of magnitude in the peak amplitude of magnetic susceptibility from background values, (ii) a general coarsening of the magnetic grain size in a mineral assemblage dominated by titano-magnetites, (iii) FORC distributions pushing towards the coarse MD or PSD component, and (iv) thermomagnetic curves depicting the occurrence of several magnetite phases. These four features are very different from the fine-grained biogenic magnetic assemblages characterized by the combination of lower MS and higher coercivity values that dominate the predominant mixtures of the non-interacting SSD and PSD components in the non-IRD influenced background sedimentation. Our results show that the last 70.000 yr of sedimentation in the GIB were controlled by the relative contribution of local detrital material derived from the Iberian Variscan Chain and IRD alien material from the iceberg melting during the Heinrich Events. They also show two main IRD provenance fields: Europe and Canada. And that the later is more important for for HL1, HL2, HL4 and HL5. FORCs analysis complemented the isotopic information and provided a very unique information, indicating that glacial flour may not always have the same provenance as IRD and that ice-melted derived suspended sediment has its own dynamics and may reach further and/or persists longer than IRD.

Measurements of small ice crystals in arctic cirrus: observations from the Indirect and Semi-Direct Aerosol Campaign (ISDAC)

In-situ observations on the size and shape of particles in arctic cirrus are less common than those in mid-latitude and tropical cirrus with considerable uncertainty about the contributions of small ice crystals (maximum dimension D<50 µm) to the mass and radiative properties that impact radiative forcing. In situ measurements of small ice crystals in arctic cirrus were made during the Indirect and Semi-Direct Aerosol Campaign (ISDAC) in April 2008 during transits of the National Research Council of Canada Convair-580 between Fairbanks and Barrow, Alaska and during Mixed Phase Arctic Cloud Experiment (MPACE) in October 2004 with the University of North Dakota (UND) Citation over Barrow, Alaska. Concentrations of small ice crystals with D < 50 μm from a Cloud and Aerosol Spectrometer (CAS), a Cloud Droplet Probe (CDP), a Forward Scattering Spectrometer Probe (FSSP), and a two-dimensional stereo probe (2DS) were compared as functions of the concentrations of crystals with D > 100 μm measured by a Cloud Imaging Probe (CIP) and two-dimensional stereo probe (2DS) in order to assess whether the shattering of large ice crystals on protruding components of different probes artificially amplified measurements of small ice crystal concentrations. The dependence of the probe comparison on other variables as CIP N>100 (number concentrations greater than diameter D>100 μm),temperature, relative humidity respect to ice (RHice), dominant habit from the Cloud Particle Imager (CPI), aircraft roll, pitch, true air speed and angle of attack was examined to understand potential causes of discrepancies between probe concentrations. Data collected by these probes were also compared against the data collected by a CAS, CDP and CIP during the Tropical Warm Pool-International Cloud Experiment (TWP-ICE) and by a CAS and 2DS during the Tropical Composition, Cloud and Climate Coupling (TC4) missions. During ISDAC, the CAS and FSSP both overestimated measurements of small ice crystals compared to both the CDP and 2DS by 1-2 orders of magnitude. Further, the amount of overestimation increased with the concentrations from the CIP2 (N>100 > 0.1 L-1). There was an unexplained discrepancy in concentrations of small crystals between the CDP and 2DS during ISDAC. In addition, there was a strong dependence on RHice of the average ratios of the N3-50, CAS/N3-50,CDP, N3-50, FSSP096/N3-50,CDP, N3-50, CAS/N3-50,FSSP096, N10-50, CDP/N3-50,2DS, N10-50, FSSP096/N10-50,2DS. Continued studies are needed to understand the discrepancy of these probes.

Close encounters: international exhibitions and the material culture of the British Empire, c.1880-1940

Apparitions of empire and imperial ideologies were deeply embedded in the International Exhibition, a distinct exhibitionary paradigm that came to prominence in the mid-nineteenth century. Exhibitions were platforms for the display of objects, the movement of people, and the dissemination of ideas across and between regions of the British Empire, thereby facilitating contact between its different cultures and societies. This thesis aims to disrupt a dominant understanding of International Exhibitions, which forwards the notion that all exhibitions, irrespective of when or where they were staged, upheld a singular imperial discourse (i.e. Greenhalgh 1988, Rydell 1984). Rather, this thesis suggests International Exhibitions responded to and reflected the unique social, political and economic circumstances in which they took place, functioning as cultural environments in which pressing concerns of the day were worked through. Understood thus, the International Exhibition becomes a space for self-presentation, serving as a stage from which a multitude of interests and identities were constructed, performed and projected. This thesis looks to the visual and material culture of the International Exhibition in order to uncover this more nuanced history, and foregrounds an analysis of the intersections between practices of exhibition-making and identity-making. The primary focus is a set of exhibitions held in Glasgow in the late-1880s and early-1900s, which extends the geographic and temporal boundaries of the existing scholarship. What is more, it looks at representations of Canada at these events, another party whose involvement in the International Exhibition tradition has gone largely unnoticed. Consequently, this thesis is a thematic investigation of the links between a municipality routinely deemed the ‘Second City of the Empire’ and a Dominion settler colony, two types of geographic setting rarely brought into dialogue. It analyses three key elements of the exhibition-making process, exploring how iconographies of ‘quasi-nationhood’ were expressed through an exhibition’s planning and negotiation, its architecture and its displays. This original research framework deliberately cuts across strata that continue to define conceptions of the British Empire, and pushes beyond a conceptual model defined by metropole and colony. Through examining International Exhibitions held in Glasgow in the late-Victorian and Edwardian periods, and visions of Canada in evidence at these events, the goal is to offer a novel intervention into the existing literature concerning the cultural history of empire, one that emphasises fluidity rather than fixity and which muddles the boundaries between centre and periphery.

Regional habitat needs of a nationally listed species, Canada Warbler (Cardellina canadensis), in Alberta, Canada

Understanding factors that affect the distribution and abundance of species is critical to developing effective management plans for conservation. Our goal was to quantify the distribution and abundance of Canada Warbler (Cardellina canadensis), a threatened old-forest associate in Alberta, Canada. The Canada Warbler has declined across its range, including in Alberta where habitat loss and alteration from urban expansion, forestry, and energy development are changing the forest landscape. We used 110,427 point count survey visits from 32,287 unique survey stations to model local-level (150-m radius circular buffers) and stand-level (564-m radius circular buffers) habitat associations of the Canada Warbler. We found that habitat supporting higher densities of Canada Warblers was locally concentrated yet broadly distributed across Alberta’s boreal forest region. Canada Warblers were most commonly associated with older deciduous forest at the local scale, particularly near small, incised streams, and greater amounts of deciduous forest at the stand scale. Predicted density was lower in other forest types and younger age classes measured at the local scale. There was little evidence that local-scale fragmentation (i.e., edges created by linear features) influenced Canada Warbler abundance. However, current forestry practices in the province likely will reduce the availability of Canada Warbler habitat over time by cutting old deciduous forest stands. Our results suggest that conservation efforts aimed at Canada Warbler focus on retaining large stands of old deciduous forest, specifically stands adjacent to streams, by increasing the width of deciduous retention buffers along streams during harvest and increasing the size and number of old forest residual patches in harvested stands.

Brij Detergents Reveal New Aspects Of Membrane Microdomain In Erythrocytes.

Membrane microdomains enriched in cholesterol, sphingolipids (rafts), and specific proteins are involved in important physiological functions. However their structure, size and stability are still controversial. Given that detergent-resistant membranes (DRMs) are in the liquid-ordered state and are rich in raft-like components, they might correspond to rafts at least to some extent. Here we monitor the lateral order of biological membranes by characterizing DRMs from erythrocytes obtained with Brij-98, Brij-58, and TX-100 at 4 °C and 37 °C. All DRMs were enriched in cholesterol and contained the raft markers flotillin-2 and stomatin. However, sphingomyelin (SM) was only found to be enriched in TX-100-DRMs - a detergent that preferentially solubilizes the membrane inner leaflet - while Band 3 was present solely in Brij-DRMs. Electron paramagnetic resonance spectra showed that the acyl chain packing of Brij-DRMs was lower than TX-100-DRMs, providing evidence of their diverse lipid composition. Fatty acid analysis revealed that the SM fraction of the DRMs was enriched in lignoceric acid, which should specifically contribute to the resistance of SM to detergents. These results indicate that lipids from the outer leaflet, particularly SM, are essential for the formation of the liquid-ordered phase of DRMs. At last, the differential solubilization process induced by Brij-98 and TX-100 was monitored using giant unilamellar vesicles. This study suggests that Brij and TX-100-DRMs reflect different degrees of lateral order of the membrane microdomains. Additionally, Brij DRMs are composed by both inner and outer leaflet components, making them more physiologically relevant than TX-100-DRMs to the studies of membrane rafts.

Antibacterial activity of root canal filling materials for primary teeth: zinc oxide and eugenol cement, Calen paste thickened with zinc oxide, Sealapex and EndoREZ

This study evaluated in vitro the antibacterial activity of 4 root canal filling materials for primary teeth - zinc oxide and eugenol cement (ZOE), Calen paste thickened with zinc oxide (Calen/ZO), Sealapex sealer and EndoREZ sealer - against 5 bacterial strains commonly found in endodontic infections (Kocuria rhizophila, Enterococcus faecalis, Streptococcus mutans, Escherichia coli and Staphylococcus aureus) using the agar diffusion test (agar-well technique). Calen paste, 1% chlorhexidine digluconate (CHX) and distilled water served as controls. Seven wells per dish were made at equidistant points and immediately filled with the test and control materials. After incubation of the plates at 37oC for 24 h, the diameter of the zones of bacterial growth inhibition produced around the wells was measured (in mm) with a digital caliper under reflected light. Data were analyzed statistically by analysis of variance and Tukey's post-hoc test (?=0.05). There were statistically significant differences (p<0.0001) among the zones of bacterial growth inhibition produced by the different materials against all target microorganisms. K. rhizophila was inhibited more effectively (p<0.05) by ZOE, while Calen/ZO had its highest antibacterial activity against E. faecalis (p<0.05). S. mutans was inhibited by Calen/ZO, Sealapex and ZOE in the same intensity (p>0.05). E. coli was inhibited more effectively (p<0.05) by ZOE, followed by Calen/ZO and Sealapex. Calen/ZO and ZOE were equally effective (p>0.05) against S. aureus, while Sealapex had the lowest antibacterial efficacy (p<0.05) against this microorganism. EndoREZ presented antibacterial activity only against K. rhizophila and S. aureus. The Calen paste and Calen/ZO produced larger zones of inhibition than 1% CHX when the marker microorganism was E faecalis. In conclusion, the in vitro antibacterial activity of the 4 root canal filling materials for primary teeth against bacterial strains commonly found in endodontic infections can be presented in a decreasing order of efficacy as follows: ZOE>Calen/ZO>Sealapex>EndoREZ.

Determination of Three-Dimensional Left Ventricle Motion to Analyze Ventricular Dyssyncrony in SPECT Images

A method to compute three-dimension (3D) left ventricle (LV) motion and its color coded visualization scheme for the qualitative analysis in SPECT images is proposed. It is used to investigate some aspects of Cardiac Resynchronization Therapy (CRT). The method was applied to 3D gated-SPECT images sets from normal subjects and patients with severe Idiopathic Heart Failure, before and after CRT. Color coded visualization maps representing the LV regional motion showed significant difference between patients and normal subjects. Moreover, they indicated a difference between the two groups. Numerical results of regional mean values representing the intensity and direction of movement in radial direction are presented. A difference of one order of magnitude in the intensity of the movement on patients in relation to the normal subjects was observed. Quantitative and qualitative parameters gave good indications of potential application of the technique to diagnosis and follow up of patients submitted to CRT.

Searching for star formation outside galaxies: Multiwavelength analysis of the intragroup medium of Hickson Compact Group 100

We use multiwavelength data (H I, FUV, NUV, R) to search for evidence of star formation in the intragroup medium of the Hickson Compact Group 100. We find that young star-forming regions are located in the intergalactic H I clouds of the compact group which extend to over 130 kpc away from the main galaxies. A tidal dwarf galaxy (TDG) candidate is located in the densest region of the H I tail, 61 kpc from the brightest group member and its age is estimated to be only 3.3 Myr. Fifteen other intragroup H II regions and TDG candidates are detected in the Galaxy Evolution Explorer (GALEX) FUV image and within a field 10' x 10' encompassing the H I tail. They have ages <200 Myr, H I masses of 10(9.2-10.4) M(circle dot), 0.001 of them are associated have column densities about one order of magnitude lower than N(H I) similar to 10(21) cm(-2).

The chemical evolution of IC 10

Context. Dwarf irregular galaxies are relatively simple unevolved objects where it is easy to test models of galactic chemical evolution. Aims. We attempt to determine the star formation and gas accretion history of IC 10, a local dwarf irregular for which abundance, gas, and mass determinations are available. Methods. We apply detailed chemical evolution models to predict the evolution of several chemical elements (He, O, N, S) and compared our predictions with the observational data. We consider additional constraints such as the present-time gas fraction, the star formation rate (SFR), and the total estimated mass of IC 10. We assume a dark matter halo for this galaxy and study the development of a galactic wind. We consider different star formation regimes: bursting and continuous. We explore different wind situations: i) normal wind, where all the gas is lost at the same rate and ii) metal-enhanced wind, where metals produced by supernovae are preferentially lost. We study a case without wind. We vary the star formation efficiency (SFE), the wind efficiency, and the time scale of the gas infall, which are the most important parameters in our models. Results. We find that only models with metal-enhanced galactic winds can reproduce the properties of IC 10. The star formation must have proceeded in bursts rather than continuously and the bursts must have been less numerous than similar to 10 over the whole galactic lifetime. Finally, IC 10 must have formed by a slow process of gas accretion with a timescale of the order of 8 Gyr.