Effects of Prenatal Exposure to a 50-Hz Magnetic Field on One-Trial Passive Avoidance Learning in 1-Day-Old Chicks

We investigated memory impairment in newly hatched chicks following in ovo exposure to a 50-Hz magnetic field (MF) of 2 mT (60 min/day) on embryonic days 12-18. Isolated and paired chicks were used to test the effect of stress during training, and memory retention was tested at 10, 30, and 120 min, following exposure to a bitter-tasting bead (100% methylanthranilate). Results showed that memory was intact at 10 min in both isolated and paired chicks with or without MF exposure. However, while isolated chicks had good memory retention levels at 30 and 120 min, those exposed to MF did not. The results suggest a potential disruption of memory formation following in ovo exposure to MF, with this effect only evident in the more stressed, isolated chicks. Bioelectromagnetics 31:150-155, 2010. (C) 2009 Wiley-Liss. Inc.

One style does not fit all

The different types of outsourcing and the management requirements for each of them are discussed. An outsourcing has a high strategic importance to the buying company when it is aligned with the organization's long term strategies and when its results are either positive or negative. Functional outsourcings are characterized by both low strategic importance and financial impact, and the products/services that fall in this category belong to support activities which are highly standardized. Leverage outsourcings are those that have a low strategic importance, but high financial impact to the outsourcer, and they concentrate on operational aspects, leaving strategic issues.

Sexual behavior in a one-male unit of Rhinopithecus bieti in captivity

Data regarding the sexual behavior of black-and-white snub-nosed monkeys (Rhinopithecus bieti) were collected in 1998 in a one-male unit in captivity by all-occurrences sampling during the mating season. Before the present study, little was known about the sexual behavior of this species. This study showed that female solicitation is mainly expressed as "prostration plus glancing laterally" (PG) or "sitting plus head moving up and down" (HM), and male solicitation is exhibited by the "grunt bared-teeth display." The mount-to-ejaculation ratio was 5.2 on average, and single-mount ejaculations (SMEs) were observed in only 4.4% of mounts on days with at least one ejaculation. Therefore, the main copulatory pattern of this species is multiple-mount ejaculation (MME). Females initiated 72% of 18 ejaculatory mounts. Females initiated more ejaculatory mounts than non-ejaculatory ones. In general, the patterns of sexual behavior in this species are similar to those reported for other Colobines. (C) 2004 Wiley-Liss, Inc.

Two is better than one: Distinct roles for familiarity and recollection in retrieving palimpsest memories

Storing a new pattern in a palimpsest memory system comes at the cost of interfering with the memory traces of previously stored items. Knowing the age of a pattern thus becomes critical for recalling it faithfully. This implies that there should be a tight coupling between estimates of age, as a form of familiarity, and the neural dynamics of recollection, something which current theories omit. Using a normative model of autoassociative memory, we show that a dual memory system, consisting of two interacting modules for familiarity and recollection, has best performance for both recollection and recognition. This finding provides a new window onto actively contentious psychological and neural aspects of recognition memory.

One step self-aligned multilayer patterning process for the fabrication of organic complementary circuits in combination with inkjet printing

Recent development of solution processable organic semiconductors delineates the emergence of a new generation of air-stable, high performance p- and n-type materials. This makes it indeed possible for printed organic complementary circuits (CMOS) to be used in real applications. The main technical bottleneck for organic CMOS to be adopted as the next generation organic integrated circuit is how to deposit and pattern both p- and n-type semiconductor materials with high resolutions at the same time. It represents a significant technical challenge, especially if it can be done for multiple layers without mask alignment. In this paper, we propose a one-step self-aligned fabrication process which allows the deposition and high resolution patterning of functional layers for both p- and n-channel thin film transistors (TFTs) simultaneously. All the dimensional information of the device components is featured on a single imprinting stamp, and the TFT-channel geometry, electrodes with different work functions, p- and n-type semiconductors and effective gate dimensions can all be accurately defined by one-step imprinting and the subsequent pattern transfer process. As an example, we have demonstrated an organic complementary inverter fabricated by 3D imprinting in combination with inkjet printing and the measured electrical characteristics have validated the feasibility of the novel technique. © 2012 Elsevier B.V. All rights reserved.

Electrical transport and magnetic properties of Mn3O4-La0.7Ca0.3MnO3 ceramic composites prepared by a one-step spray-drying technique

La0.7Ca0.3MnO3/Mn3O4 composites can be synthesized in one step by thermal treatment of a spray-dried precursor, instead of mixing pre-synthesized powders. Another advantage of this composite system is that a long sintering step can be used without leading to significant modification of the manganite composition. The percolation threshold is reached at ∼20 vol% of manganite phase. The 77 K low field magnetoresistance is enhanced to ∼11% at 0.15 T when the composition is close to the percolation threshold. © 2007 Elsevier Ltd. All rights reserved.

Pressure data analysis of formula one racing engines

The measured time-history of the cylinder pressure is the principal diagnostic in the analysis of processes within the combustion chamber. This paper defines, implements and tests a pressure analysis algorithm for a Formula One racing engine in MATLAB1. Evaluation of the software on real data is presented. The sensitivity of the model to the variability of burn parameter estimates is also discussed. Copyright © 1997 Society of Automotive Engineers, Inc.

Wave propagation in nonlinear one-dimensional soil model

The objective of the research conducted by the authors is to explore the feasibility of determining reliable in situ values of shear modulus as a function of strain. In this paper the meaning of the material stiffness obtained from impact and harmonic excitation tests on a surface slab is discussed. A one-dimensional discrete model with the nonlinear material stiffness is used for this purpose. When a static load is applied followed by an impact excitation, if the amplitude of the impact is very small, the measured wave velocity using the cross-correlation indicates the wave velocity calculated from the tangent modulus corresponding to the state of stress caused by the applied static load. The duration of the impact affects the magnitude of the displacement and the particle velocity but has very little effect on the estimation of the wave velocity for the magnitudes considered herein. When a harmonic excitation is applied, the cross-correlation of the time histories at different depths estimates a wave velocity close to the one calculated from the secant modulus in the stress-strain loop under steady-state condition. Copyright © 2008 John Wiley & Sons, Ltd.

Wave propagation due to sinusoidal excitation in nonlinear one-dimensional soil column

The objective of the author's on-going research is to explore the feasibility of determining reliable in situ curves of shear modulus as a function of strain using the dynamic test. The purpose of this paper is limited to investigating what material stiffness is measured from a dynamic test, focusing on the harmonic excitation test. A one-dimensional discrete model with nonlinear material properties is used for this purpose. When a sinusoidal load is applied, the cross-correlation of signals from different depths estimates a wave velocity close to the one calculated from the secant modulus in the stress-strain loops under steady-state conditions. The variables that contributed to changing the average slope of the stress-strain loop also influence the estimate of the wave velocity from cross-correlation. Copyright ASCE 2007.