Pelagic fishery resources of Sri Lanka and its present level of exploitation with special reference to off-shore and deep-sea waters

Pelagic resources around Sri Lanka may be categorized into three major groups: (1) the small pelagic varieties such as the sprats, halmessa, sardines (salaya, soodaya), and herrings (hurulla). (2) the medium size pelagic species such as the mackerel (kumbala and bolla), barracuda (jeela), seer Spanish mackerel (thora), frigate mackeral (alagoduwa), mackerel tuna (atawalla) and the skipjack (balaya). (3) the large size fishes such as yellow fin tuna (kelawalla), big eye tuna, marlins (koppora and gappara), sail fish (thalapath), sharks (mora) and rays (maduwa). Production levels of exploited resources are noted, and seasonal patterns and annual in their abundance are considered. On the basis of observations and estimations of the existing fisheries, and the results of experimental fishing, figures are presented of the potential yield of those species already exploited. The development of that potential depends on the development of modern techniques of pole and line fishing, application of tuna longline and shark longline, increasing the number of units of drift nets and the introduction of a bait fishery for the longline and pole line fishery. Some features upon which the successes of any venture to exploit such resources are noted, particularly those which relate to the nature of the fishing vessels used.

Fishing gear and methods for off-shore fishing in Sri Lanka

The author describes the commercial viable off-shore fishing methods for catching known commercial resources available around Sri Lanka. He also describes the in-shore fishing methods such as bait fishery which are related and of prime importance for carrying out certain off-shore methods. The paper is intended as a background for the description of fishing methods. The methods discussed are: (1) Longlining for large pelagic species such as large tuna (yellow fin, big eye), shark, spearfish and others; (2) Drift-netting for small and large tuna species (skipjack, yellow fin and others), shark, spearfish, etc.; (3) Pole and line for all deep-sea pelagic species such as skipjack, yellow fin, frigate mackerel, etc.; and (4) Purse seining (small scale) for small pelagic species suitable as bait fish for pole and line and longline fisheries.

Operatives for off-shore and deep-sea fishing vessels

The need for operatives for the offshore and deep-sea fishing vessels is currently very great, and the importance of fisheries training has long been recognized by the Department of Fisheries. In 1974 the Sri Lanka Fisheries Training Institute was established with Japanese aid. The author discusses the purpose and functions of the institute, the first batch of trainees from which finished their training in June 1977. Annexes describe the courses offered, diplomas and certificates, admission requirements, and the conditions required for candidates sitting second-hand fishing vessel examination of the Mercantile Marine Department, Bombay District.

Infrastructure facilities for deep-sea and off-shore fishing

The author presents a brief account of the infrastructure facilities required for the fishing industry. He describes those facilities presently available in Sri Lanka, and those that are under construction, and gives a few suggestions indicating the nature of infrastructure facilities that are vital to the local situation at its present stage of development. The principal facilities discussed are (1) fish landing places; (2) unloading handling facilities; (3) vessel servicing facilities; and (4) navigation aids.

Private sector to invest in off-shore fishing and to encourage the financial incentives to be introduced for deep-sea fishing in Sri Lanka

The author discusses the financial aspects of private sector investment in off-shore fishing, with particular attention to tax incentives, such as those offered to tourist hotels, which are considered applicable to the current case of fishing vessel purchase, and the operation of the vessels themselves, hiring, publicity and profitability. Tax incentives which were introduced to encourage investment in the tourist industry should be introduced to encourage investment in the fishing industry on the lines presented. It is essential that wide publicity be given for the incentives introduced so as to achieve the desired results.

Durability study of eleven years old cement-bentonite cut-off wall material

Comprehensive understanding of the long-term performance of cement-bentonite slurry trench cut-off walls is essential as these mixes may degrade when exposed to aggressive environments or when subjected to prolonged drying. A series of wetting-drying and immersion experiments was carried out to evaluate the durability characteristics of laboratory mixed samples and block field samples from 40 days to 11 years of age. For the wetting-drying tests, the samples buried in medium graded sand were subjected to periodical flooding and drying cycles. They were then used for permeability testing and unconfined compressive strength (UCS) testing. For the immersion tests, the samples confined in perforated molds were submerged in magnesium sulfate solution for 16 weeks and their microstructures were then analyzed using X-ray diffraction (XRD) technique. This paper identifies the effects of contaminant exposure on durability of cement-bentonite and the effects of aging by comparing 11 years old samples to younger samples. Test results showed that young or previously contaminated cement-bentonite mixes are more susceptible to sulfate attack than old or less contaminated mixes. Copyright ASCE 2008.

Video tracking using dual-treewavelet polar matching and particle filtering

In this paper, we describe a video tracking application using the dual-tree polar matching algorithm. The models are specified in a probabilistic setting, and a particle ilter is used to perform the sequential inference. Computer simulations demonstrate the ability of the algorithm to track a simulated video moving target in an urban environment with complete and partial occlusions. © The Institution of Engineering and Technology.

Compressor wake/leading-edge interactions at off design incidences

In this paper, the effects of wake/leading-edge interactions were studied at off-design conditions. Measurements were performed on the stator-blade suction surface at midspan. The leading-edge flow-field was investigated using hotwire micro-traverses, hotfilm surface shear-stress sensors and pressure micro-tappings. The trailing-edge flow-field was investigated using hotwire boundary-layer traverses. Unsteady CFD calculations were also performed to aid the interpretation of the results. At low flow coefficients, the time-averaged momentum thickness of the leading-edge boundary layer was found to rise as the flow coefficient was reduced. The time-resolved momentum-thickness rose due to the interaction of the incoming rotor wake. As the flow coefficient was reduced, the incoming wakes increased in pitch-wise extent, velocity deficit and turbulence intensity. This increased both the time-resolved rise in the momentum thickness and the turbulent spot production within the wake affected boundary-layer. Close to stall, a drop in the leading-edge momentum thickness was observed in-between wake events. This was associated with the formation of a leading-edge separation bubble in-between wake events. The wake interaction with the bubble gave rise to a shedding phenomenon, which produced large length scale disturbances in the surface shear stress. Copyright © 2008 by ASME.

Physiological modelling for improved reliability in silhouette-driven gradient-based hand tracking

We present a gradient-based motion capture system that robustly tracks a human hand, based on abstracted visual information - silhouettes. Despite the ambiguity in the visual data and despite the vulnerability of gradient-based methods in the face of such ambiguity, we minimise problems related to misfit by using a model of the hand's physiology, which is entirely non-visual, subject-invariant, and assumed to be known a priori. By modelling seven distinct aspects of the hand's physiology we derive prior densities which are incorporated into the tracking system within a Bayesian framework. We demonstrate how the posterior is formed, and how our formulation leads to the extraction of the maximum a posteriori estimate using a gradient-based search. Our results demonstrate an enormous improvement in tracking precision and reliability, while also achieving near real-time performance. © 2009 IEEE.

A vision-based remote control

This Chapter presents a vision-based system for touch-free interaction with a display at a distance. A single camera is fixed on top of the screen and is pointing towards the user. An attention mechanism allows the user to start the interaction and control a screen pointer by moving their hand in a fist pose directed at the camera. On-screen items can be chosen by a selection mechanism. Current sample applications include browsing video collections as well as viewing a gallery of 3D objects, which the user can rotate with their hand motion. We have included an up-to-date review of hand tracking methods, and comment on the merits and shortcomings of previous approaches. The proposed tracker uses multiple cues, appearance, color, and motion, for robustness. As the space of possible observation models is generally too large for exhaustive online search, we select models that are suitable for the particular tracking task at hand. During a training stage, various off-the-shelf trackers are evaluated. From this data differentmethods of fusing them online are investigated, including parallel and cascaded tracker evaluation. For the case of fist tracking, combining a small number of observers in a cascade results in an efficient algorithm that is used in our gesture interface. The system has been on public display at conferences where over a hundred users have engaged with it. © 2010 Springer-Verlag Berlin Heidelberg.

Online multiple classifier boosting for object tracking

This paper presents a new online multi-classifier boosting algorithm for learning object appearance models. In many cases the appearance model is multi-modal, which we capture by training and updating multiple strong classifiers. The proposed algorithm jointly learns the classifiers and a soft partitioning of the input space, defining an area of expertise for each classifier. We show how this formulation improves the specificity of the strong classifiers, allowing simultaneous location and pose estimation in a tracking task. The proposed online scheme iteratively adapts the classifiers during tracking. Experiments show that the algorithm successfully learns multi-modal appearance models during a short initial training phase, subsequently updating them for tracking an object under rapid appearance changes. © 2010 IEEE.

3D multi-car tracking based on monocular video

We propose a system that can reliably track multiple cars in congested traffic environments. Our system's key basis is the implementation of a sequential Monte Carlo algorithm, which introduces robustness against problems arising due to the proximity between vehicles. By directly modelling occlusions and collisions between cars we obtain promising results on an urban traffic dataset. Extensions to this initial framework are also suggested. © 2010 IEEE.

Population dynamics of killifish Aphanius dispar (Ruppel) in Sandspit area off Karachi

Growth and mortality parameters of Aphanius dispar a cyprinoides generally observed in the catches of near shore area were estimated from the length frequency data collected from Sandspit area of Karachi, using LFSA. The von Bertalanffy growth parameters were estimated as Loo=71.73 mm & K=L35/yr for Male Aphanius dispar and Loo=70.66 & K=l.41 for female. Total Mortality coefficient (Z) was estimated using Length converted catch curve which is equal to 2.12/yr, for male and for female 2.19/yr. Natural mortality (M) was estimated by Pauly's empirical formula: M=l.64/yr (male) and 1.70/yr (female). The species also displayed two cohorts a year.