Predicting class I major histocompatibility complex (MHC) binders using multivariate statistics:comparison of discriminant analysis and multiple linear regression

The accurate in silico identification of T-cell epitopes is a critical step in the development of peptide-based vaccines, reagents, and diagnostics. It has a direct impact on the success of subsequent experimental work. Epitopes arise as a consequence of complex proteolytic processing within the cell. Prior to being recognized by T cells, an epitope is presented on the cell surface as a complex with a major histocompatibility complex (MHC) protein. A prerequisite therefore for T-cell recognition is that an epitope is also a good MHC binder. Thus, T-cell epitope prediction overlaps strongly with the prediction of MHC binding. In the present study, we compare discriminant analysis and multiple linear regression as algorithmic engines for the definition of quantitative matrices for binding affinity prediction. We apply these methods to peptides which bind the well-studied human MHC allele HLA-A*0201. A matrix which results from combining results of the two methods proved powerfully predictive under cross-validation. The new matrix was also tested on an external set of 160 binders to HLA-A*0201; it was able to recognize 135 (84%) of them.

Analysis of single and multiple, non-permanent, tunable, birefringent spectral holes in a fibre-Bragg grating stop-band produced via uniaxial pressure

We present an experimental and numerical study of transversely loaded uniform fibre-Bragg gratings. A novel loading configuration is described, producing pressure-induced spectral holes in an initially strong uniform grating. The birefringence properties of these gratings are analysed. It is shown that the frequency splitting of the two spectral holes, corresponding to two orthogonal polarisation states, can be adjusted precisely using this loading configuration. We finally demonstrate a new and simple scheme to induce multiple spectral holes in the stop-band. © 2003 Elsevier Science B.V. All rights reserved.

Characterization of human mesenchymal stem cells from multiple donors and the implications for large scale bioprocess development

Cell-based therapies have the potential to contribute to global healthcare, whereby the use of living cells and tissues can be used as medicinal therapies. Despite this potential, many challenges remain before the full value of this emerging field can be realized. The characterization of input material for cell-based therapy bioprocesses from multiple donors is necessary to identify and understand the potential implications of input variation on process development. In this work, we have characterized bone marrow derived human mesenchymal stem cells (BM-hMSCs) from multiple donors and discussed the implications of the measurable input variation on the development of autologous and allogeneic cell-based therapy manufacturing processes. The range of cumulative population doublings across the five BM-hMSC lines over 30 days of culture was 5.93, with an 18.2% range in colony forming efficiency at the end of the culture process and a 55.1% difference in the production of interleukin-6 between these cell lines. It has been demonstrated that this variation results in a range in the process time between these donor hMSC lines for a hypothetical product of over 13 days, creating potential batch timing issues when manufacturing products from multiple patients. All BM-hMSC donor lines demonstrated conformity to the ISCT criteria but showed a difference in cell morphology. Metabolite analysis showed that hMSCs from the different donors have a range in glucose consumption of 26.98 pmol cell−1 day−1, Lactate production of 29.45 pmol cell−1 day−1 and ammonium production of 1.35 pmol cell−1 day−1, demonstrating the extent of donor variability throughout the expansion process. Measuring informative product attributes during process development will facilitate progress towards consistent manufacturing processes, a critical step in the translation cell-based therapies.

Conclusion : on multiple levels of analysis, context, contingency and capital

In this concluding chapter, we bring together the threads and reflections on the chapters contained in this text and show how they relate to multi-level issues. The book has focused on the world of Human Resource Management (HRM) and the systems and practices it must put in place to foster innovation. Many of the contributions argue that in order to bring innovation about, organisations have to think carefully about the way in which they will integrate what is, in practice, organisationally relevant — but socially distributed — knowledge. They need to build a series of knowledge-intensive activities and networks, both within their own boundaries and across other important external inter-relationships. In so doing, they help to co-ordinate important information structures. They have, in effect, to find ways of enabling people to collaborate with each other at lower cost, by reducing both the costs of their co-ordination and the levels of unproductive search activity. They have to engineer these behaviours by reducing the risks for people that might be associated with incorrect ideas and help individuals, teams and business units to advance incomplete ideas that are so often difficult to codify. In short, a range of intangible assets must flow more rapidly throughout the organisation and an appropriate balance must be found between the rewards and incentives associated with creativity, novelty and innovation, versus the risks that innovation may also bring.

Több szempontú részvételi döntések a fenntarthatósági értékelésekben. A legnépszerűbb módszerek összehasonlítása = Participatory multi-criteria decision analysis. A comparison of methodologies

A fenntarthatóság értékelése definíciószerűen többdimenziós probléma. A megfelelő alternatíva, forgatókönyv, eljárás stb. kiválasztásakor ugyanis a döntéshozóknak egyszerre kell figyelembe venniük környezetvédelmi, gazdasági és társadalmi szempontokat. Az ilyen döntéseket alátámaszthatják a több szempontú döntéshozatali modellek. A tanulmány a több szempontú döntési eljárások közül a legfontosabb hétnek az alkalmazhatóságát vizsgálja részvételi körülmények között. Az utóbbi évek e témában publikált esettanulmányainak áttekintésével megállapítható, hogy egyik módszer sem uralja a többit, azok különböző feltételek mellett eltérő sikerrel használhatók. Ennek ellenére a különböző módszerek kombinációjával végrehajthatunk olyan eljárásokat, amelyekkel az egyes módszerek előnyeit még jobban kiaknázhatjuk. ________ Measuring and comparing the sustainability of certain actions, scenarios, technologies, etc. is by definition a multidimensional problem. Decision-makers must consider environmental, economic and social aspects when choosing an alternative course of action. Such decisions can be aided by multi-criteria decision analysis (MCDA). This paper investigates seven different MCDA methodologies: MAU, the Analytic Hierarchic Process (AHP), the ELECTRE, PROMETHEE, REGIME, and NAIADE methods, and "Ideal and reference point" approaches). It is based on a series of reports in which over 30 real-world case studies focusing on participatory MCDA were reviewed. It is stressed, however, that there is no "best" choice in the list of MCDA techniques. Some methods fit certain decision problems better than others. Nonetheless, some complementary benefits of the different techniques can be exploited by combining these methodologies.

Time, Cost, and Environmental Impact Analysis for Sustainable Design at Multiple Building Levels

Construction projects are complex endeavors that require the involvement of different professional disciplines in order to meet various project objectives that are often conflicting. The level of complexity and the multi-objective nature of construction projects lend themselves to collaborative design and construction such as integrated project delivery (IPD), in which relevant disciplines work together during project conception, design and construction. Traditionally, the main objectives of construction projects have been to build in the least amount of time with the lowest cost possible, thus the inherent and well-established relationship between cost and time has been the focus of many studies. The importance of being able to effectively model relationships among multiple objectives in building construction has been emphasized in a wide range of research. In general, the trade-off relationship between time and cost is well understood and there is ample research on the subject. However, despite sustainable building designs, relationships between time and environmental impact, as well as cost and environmental impact, have not been fully investigated. The objectives of this research were mainly to analyze and identify relationships of time, cost, and environmental impact, in terms of CO2 emissions, at different levels of a building: material level, component level, and building level, at the pre-use phase, including manufacturing and construction, and the relationships of life cycle cost and life cycle CO2 emissions at the usage phase. Additionally, this research aimed to develop a robust simulation-based multi-objective decision-support tool, called SimulEICon, which took construction data uncertainty into account, and was capable of incorporating life cycle assessment information to the decision-making process. The findings of this research supported the trade-off relationship between time and cost at different building levels. Moreover, the time and CO2 emissions relationship presented trade-off behavior at the pre-use phase. The results of the relationship between cost and CO2 emissions were interestingly proportional at the pre-use phase. The same pattern continually presented after the construction to the usage phase. Understanding the relationships between those objectives is a key in successfully planning and designing environmentally sustainable construction projects.

Analysis of multiple cracking in metal/ceramic composites with lamellar microstructure

Financial support of this research by The Royal Society, UK (IE121116), The Carnegie Trust for the Universities of Scotland, UK (Trust Reference 31747) and DFG (PI 785/3-2, PI 785/1-2), Germany, is gratefully acknowledged. We thank Dr. S. Roy (KIT) for providing the microstructure images and Professor I. Tsukrov (University of New Hampshire, USA) for helpful discussions.

Ambient vibration tests and analysis of a multiple-span elevated bridge

Peer reviewed

DC fault performance and cost analysis of DC grids for connecting multiple offshore wind farms

ACKNOWLEDGMENT We are thankful to RTE for financial support of this project.

Selection of a network of large lakes and reservoirs suitable for global environmental change analysis using Earth Observation

The GloboLakes project, a global observatory of lake responses to environmental change, aims to exploit current satellite missions and long remote-sensing archives to synoptically study multiple lake ecosystems, assess their current condition, reconstruct past trends to system trajectories, and assess lake sensitivity to multiple drivers of change. Here we describe the selection protocol for including lakes in the global observatory based upon remote-sensing techniques and an initial pool of the largest 3721 lakes and reservoirs in the world, as listed in the Global Lakes and Wetlands Database. An 18-year-long archive of satellite data was used to create spatial and temporal filters for the identification of waterbodies that are appropriate for remote-sensing methods. Further criteria were applied and tested to ensure the candidate sites span a wide range of ecological settings and characteristics; a total 960 lakes, lagoons, and reservoirs were selected. The methodology proposed here is applicable to new generation satellites, such as the European Space Agency Sentinel-series.

Acoustic telemetry and network analysis reveal the space use of multiple reef predators and enhance marine protected area design

Marine protected areas (MPAs) are commonly employed to protect ecosystems from threats like overfishing. Ideally, MPA design should incorporate movement data from multiple target species to ensure sufficient habitat is protected. We used long-term acoustic telemetry and network analysis to determine the fine-scale space use of five shark and one turtle species at a remote atoll in the Seychelles, Indian Ocean, and evaluate the efficacy of a proposed MPA. Results revealed strong, species-specific habitat use in both sharks and turtles, with corresponding variation in MPA use. Defining the MPA's boundary from the edge of the reef flat at low tide instead of the beach at high tide (the current best in Seychelles) significantly increased the MPA's coverage of predator movements by an average of 34%. Informed by these results, the larger MPA was adopted by the Seychelles government, demonstrating how telemetry data can improve shark spatial conservation by affecting policy directly.

Acoustic telemetry and network analysis reveal the space use of multiple reef predators and enhance marine protected area design

Marine protected areas (MPAs) are commonly employed to protect ecosystems from threats like overfishing. Ideally, MPA design should incorporate movement data from multiple target species to ensure sufficient habitat is protected. We used long-term acoustic telemetry and network analysis to determine the fine-scale space use of five shark and one turtle species at a remote atoll in the Seychelles, Indian Ocean, and evaluate the efficacy of a proposed MPA. Results revealed strong, species-specific habitat use in both sharks and turtles, with corresponding variation in MPA use. Defining the MPA's boundary from the edge of the reef flat at low tide instead of the beach at high tide (the current best in Seychelles) significantly increased the MPA's coverage of predator movements by an average of 34%. Informed by these results, the larger MPA was adopted by the Seychelles government, demonstrating how telemetry data can improve shark spatial conservation by affecting policy directly.

Gene mapping and expression analysis of 16q loss of heterozygosity identifies WWOX and CYLD as being important in determining clinical outcome in multiple myeloma.

We performed fluorescent in situ hybridization (FISH) for 16q23 abnormalities in 861 patients with newly diagnosed multiple myeloma and identified deletion of 16q [del(16q)] in 19.5%. In 467 cases in which demographic and survival data were available, del(16q) was associated with a worse overall survival (OS). It was an independent prognostic marker and conferred additional adverse survival impact in cases with the known poor-risk cytogenetic factors t(4;14) and del(17p). Gene expression profiling and gene mapping using 500K single-nucleotide polymorphism (SNP) mapping arrays revealed loss of heterozygosity (LOH) involving 3 regions: the whole of 16q, a region centered on 16q12 (the location of CYLD), and a region centered on 16q23 (the location of the WW domain-containing oxidoreductase gene WWOX). CYLD is a negative regulator of the NF-kappaB pathway, and cases with low expression of CYLD were used to define a "low-CYLD signature." Cases with 16q LOH or t(14;16) had significantly reduced WWOX expression. WWOX, the site of the translocation breakpoint in t(14;16) cases, is a known tumor suppressor gene involved in apoptosis, and we were able to generate a "low-WWOX signature" defined by WWOX expression. These 2 genes and their corresponding pathways provide an important insight into the potential mechanisms by which 16q LOH confers poor prognosis.

Incomplete DJH rearrangements as a novel tumor target for minimal residual disease quantitation in multiple myeloma using real-time PCR.

The hypervariable regions of immunoglobulin heavy-chain (IgH) rearrangements provide a specific tumor marker in multiple myeloma (MM). Recently, real-time PCR assays have been developed in order to quantify the number of tumor cells after treatment. However, these strategies are hampered by the presence of somatic hypermutation (SH) in VDJH rearrangements from multiple myeloma (MM) patients, which causes mismatches between primers and/or probes and the target, leading to a nonaccurate quantification of tumor cells. Our group has recently described a 60% incidence of incomplete DJH rearrangements in MM patients, with no or very low rates of SH. In this study, we compare the efficiency of a real-time PCR approach for the analysis of both complete and incomplete IgH rearrangements in eight MM patients using only three JH consensus probes. We were able to design an allele-specific oligonucleotide for both the complete and incomplete rearrangement in all patients. DJH rearrangements fulfilled the criteria of effectiveness for real-time PCR in all samples (ie no unspecific amplification, detection of less than 10 tumor cells within 10(5) polyclonal background and correlation coefficients of standard curves higher than 0.98). By contrast, only three out of eight VDJH rearrangements fulfilled these criteria. Further analyses showed that the remaining five VDJH rearrangements carried three or more somatic mutations in the probe and primer sites, leading to a dramatic decrease in the melting temperature. These results support the use of incomplete DJH rearrangements instead of complete somatically mutated VDJH rearrangements for investigation of minimal residual disease in multiple myeloma.

Heteroduplex PCR analysis of rearranged immunoglobulin genes for clonality assessment in multiple myeloma.

BACKGROUND AND OBJECTIVE: Molecular analysis by PCR of monoclonally rearranged immunoglobulin (Ig) genes can be used for diagnosis in B-cell lymphoproliferative disorders (LPD), as well as for monitoring minimal residual disease (MRD) after treatment. This technique has the risk of false-positive results due to the "background" amplification of similar rearrangements derived from polyclonal B-cells. This problem can be resolved in advance by additional analyses that discern between polyclonal and monoclonal PCR products, such as the heteroduplex analysis. A second problem is that PCR frequently fails to amplify the junction regions, mainly due to somatic mutations frequently present in mature (post-follicular) B-cell lymphoproliferations. The use of additional targets (e.g. Ig light chain genes) can avoid this problem. DESIGN AND METHODS: We studied the specificity of heteroduplex PCR analysis of several Ig junction regions to detect monoclonal products in samples from 84 MM patients and 24 patients with B cell polyclonal disorders. RESULTS: Using two distinct VH consensus primers (FR3 and FR2) in combination with one JH primer, 79% of the MM displayed monoclonal products. The percentage of positive cases was increased by amplification of the Vlamda-Jlamda junction regions or kappa(de) rearrangements, using two or five pairs of consensus primers, respectively. After including these targets in the heteroduplex PCR analysis, 93% of MM cases displayed monoclonal products. None of the polyclonal samples analyzed resulted in monoclonal products. Dilution experiments showed that monoclonal rearrangements could be detected with a sensitivity of at least 10(-2) in a background with >30% polyclonal B-cells, the sensitivity increasing up to 10(-3) when the polyclonal background was