999 resultados para Microwave hydrothermal
Resumo:
A series of highly-functionalized 2'-hydroxychalcones have been synthesized using a microwave-assisted Claisen-Schmidt condensation. Conversion of these 2'-hydroxychalcones to their corresponding flavanones was then performed utilizing protic ionic liquids (pIL) and microwave irradiation. This methodology drastically reduces reaction time to 15 minutes compared to typical thermal methods (24 hrs) and is tolerant to a broad range of functional groups. Several chalcones reported bear four and five substituents - a degree of substitution rarely reported in the literature.
Resumo:
V2O5·nH2O nanosheets are fabricated hydrothermally with the acidified peroxovanadate solution at 200 °C for 12 h. The X-ray diffraction suggests that V2O5·nH2O nanosheets display lamellar ordering along c-axis direction. Transmission electron microscopy, field-emission scanning electron microscopy, and selected area electron diffraction indicate that V2O5·nH2O nanosheets are very thin in thickness and micron-sized in lateral dimension, and they are two-dimensional crystallites. X-ray photoelectron spectroscopy and thermogravimetric analysis are utilized to confirm the elemental composition of nanosheets. The formation process of nanosheets is also discussed in terms of time- and temperature-controlled experiments.
Resumo:
Hexagonal V0.13Mo0.87O2.935 nanowires were hydrothermally synthesized at 220 °C for the first time. X-ray diffraction and field-emission scanning electron microscopy were utilized to characterize the phase and morphology of the nanowires, respectively. Transmission electron microscopy and selected area electron diffraction indicate that the nanowires are single crystalline, growing along the [001] direction. Interestingly, the nanowires easily become amorphous under the electron irradiation. The comparative hydrothermal experiments show that the molar ratio between the starting reagents of Mo and NH4VO3 plays a vital role in the anisotropic growth of nanowires. The photoluminescence measurement demonstrates that these nanowires exhibit two strong emission peaks at 420 and 438 nm, which are probably related to the intrinsic oxygen vacancies.
Resumo:
Carbon nanotubes are one of the most prominent materials in research for creating electrodes for portable electronics. When coupled with metallic nanoparticles the performance of carbon nanotube electrodes can be dramatically improved. Microwave reduction is an extremely rapid method for producing carbon nanotube-metallic nanoparticle composites, however, this technique has so far been limited to carbon nanotube soot. An understanding of the microwave process and the interactions of metallic nanoparticles with carbon nanotubes have allowed us to extend this promising functionalisation route to pre-formed CNT electrode architectures. Nanoparticle reduction onto pre-formed architectures reduces metallic nanoparticle waste as particles are not formed where there is insufficient porosity for electrochemical processes. A two-fold increase in capacitive response, stable over 500 cycles, was observed for these composites, with a maximum capacitance of 300 F g−1 observed for a carbon Nanoweb electrode.
Resumo:
Noncontact detection characteristic of Doppler radar provides an unobtrusive means of respiration detection and monitoring. This avoids additional preparations, such as physical sensor attachment or special clothing, which can be useful for certain healthcare applications. Furthermore, robustness of Doppler radar against environmental factors, such as light, ambient temperature, interference from other signals occupying the same bandwidth, fading effects, reduce environmental constraints and strengthens the possibility of employing Doppler radar in long-term respiration detection, and monitoring applications such as sleep studies. This paper presents an evaluation in the of use of microwave Doppler radar for capturing different dynamics of breathing patterns in addition to the respiration rate. Although finding the respiration rate is essential, identifying abnormal breathing patterns in real-time could be used to gain further insights into respiratory disorders and refine diagnostic procedures. Several known breathing disorders were professionally role played and captured in a real-time laboratory environment using a noncontact Doppler radar to evaluate the feasibility of this noncontact form of measurement in capturing breathing patterns under different conditions associated with certain breathing disorders. In addition to that, inhalation and exhalation flow patterns under different breathing scenarios were investigated to further support the feasibility of Doppler radar to accurately estimate the tidal volume. The results obtained for both experiments were compared with the gold standard measurement schemes, such as respiration belt and spirometry readings, yielding significant correlations with the Doppler radar-based information. In summary, Doppler radar is highlighted as an alternative approach not only for determining respiration rates, but also for identifying breathing patterns and tidal volumes as a preferred nonwearable alternative to the conventional - ontact sensing methods.
Resumo:
We report the development of a stacked electrode supercapacitor cell using stainless steel meshes as the current collectors and optimised single walled nanotubes (SWNT)-microwave exfoliated graphene oxide (mw rGO) composites as the electrode material. The introduction of mw rGO into a SWNT matrix creates an intertwined porous structure that enhances the electroactive surface area and capacitive performance due to the 3-D hierarchical structure that is formed. The composite structure was optimised by varying the weight ratio of the SWNTs and mw rGO. The best performing ratio was the 90% SWNT-10% mw rGO electrode which achieved a specific capacitance of 306 F g-1 (3 electrode measurement calculated at 20 mV s-1). The 90% SWNT-10% mw rGO was then fabricated into a stacked electrode configuration (SEC) which significantly enhanced the electrode performance per volume (1.43 mW h cm-3, & 6.25 W cm-3). Device testing showed excellent switching capability up to 10 A g-1, and very good stability over 10000 cycles at 1.0 A g-1 with 93% capacity retention. © the Partner Organisations 2014.
Resumo:
Real-time respiratory measurement with Doppler Radar has an important advantage in the monitoring of certain conditions such as sleep apnoea, sudden infant death syndrome (SIDS), and many other general clinical uses requiring fast nonwearable and non-contact measurement of the respiratory function. In this paper, we demonstrate the feasibility of using Doppler Radar in measuring the basic respiratory frequencies (via fast Fourier transform) for four different types of breathing scenarios: normal breathing, rapid breathing, slow inhalation-fast exhalation, and fast inhalation-slow exhalation conducted in a laboratory environment. A high correlation factor was achieved between the Doppler Radar-based measurements and the conventional measurement device, a respiration strap. We also extended this work from basic signal acquisition to extracting detailed features of breathing function (I: E ratio). This facilitated additional insights into breathing activity and is likely to trigger a number of new applications in respiratory medicine.
Resumo:
Non-contact detection characteristic of Doppler radar provides an unobtrusive means of respiration detection and monitoring. This avoids additional preparations such as physical sensor attachment or special clothing. Furthermore, robustness of Doppler radar against environmental factors reduce environmental constraints and strengthens the possibility of employing Doppler radar as a practical biomedical devices in the future particularly in long term monitoring applications such as in sleep studies.
Resumo:
The modification of carbon fibre surfaces has been achieved using a novel combination of low power microwave irradiation (20 W) in both an ionic liquid (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) and an organic solvent (1,2-dichlorobenzene). The use of the ionic liquid was superior to the organic solvent in this application, resulting in a higher density of surface grafted material. As a consequence, carbon fibres treated in the ionic liquid displayed improved interfacial adhesion in the composite material (+28% relative to untreated fibres) compared to those treated in organic solvent (+18%). The methodology presented herein can be easily scaled up to industrially relevant quantities and represent a drastic reduction in both reaction time (30 min from 24 h) and energy consumption, compared to previously reported procedures. This work opens the door to potential energy and time saving strategies which can be applied to carbon fibre manufacture for high performance carbon fibre reinforced composites.