The Tomato (Solanum Lycopersicum cv. Micro-Tom) Natural Genetic Variation Rg1 and the DELLA Mutant Procera Control the Competence Necessary to Form Adventitious Roots and Shoots

Despite the wide use of plant regeneration for biotechnological purposes, the signals that allow cells to become competent to assume different fates remain largely unknown. Here, it is demonstrated that the Regeneration1 (Rg1) allele, a natural genetic variation from the tomato wild relative Solanum peruvianum, increases the capacity to form both roots and shoots in vitro; and that the gibberellin constitutive mutant procera (pro) presented the opposite phenotype, reducing organogenesis on either root-inducing medium (RIM) or shoot-inducing medium (SIM). Mutants showing alterations in the formation of specific organs in vitro were the auxin low-sensitivity diageotropica (dgt), the lateral suppresser (ls), and the KNOX-overexpressing Mouse ears (Me). dgt failed to form roots on RIM, Me increased shoot formation on SIM, and the high capacity for in vitro shoot formation of ls contrasted with its recalcitrance to form axillary meristems. Interestingly, Rg1 rescued the in vitro organ formation capacity in proRg1 and dgtRg1 double mutants and the ex vitro low lateral shoot formation in pro and ls. Such epistatic interactions were also confirmed in gene expression and histological analyses conducted in the single and double mutants. Although Me phenocopied the high shoot formation of Rg1 on SIM, it failed to increase rooting on RIM and to rescue the non-branching phenotype of ls. Taken together, these results suggest REGENERATION1 and the DELLA mutant PROCERA as controlling a common competence to assume distinct cell fates, rather than the specific induction of adventitious roots or shoots, which is controlled by DIAGEOTROPICA and MOUSE EARS, respectively.

Gases and volatile compounds associated with micro-organisms in blown pack spoilage of Brazilian vacuum-packed beef

This study correlated the composition of the spoilage bacterial flora with the main gaseous and volatile organic compounds (VOCs) found in the package headspace of spoiled, chilled, vacuum-packed meat. Fifteen chilled, vacuum-packed beef samples, suffering from blown pack spoilage, were studied using 16S rRNA clone sequencing. More than 50% of the bacteria were identified as lactic acid bacteria (LAB), followed by clostridia and enterobacteria. Fifty-one volatile compounds were detected in the spoiled samples. Although the major spoilage compounds were identified as alcohols and aldehydes, CO2 was identified as the major gas in the spoiled samples by headspace technique. Different species of bacteria contribute to different volatile compounds during meat spoilage. LAB played an important role in blown pack deterioration of the Brazilian beef studied.

Minimal alterations on the enamel surface by micro-abrasion: in vitro roughness and wear assessments

Objective: To evaluate the in vitro changes on the enamel surface after a micro-abrasion treatment promoted by different products. Material and Methods: Fifty (50) fragments of bovine enamel (15 mm × 5 mm) were randomly assigned to five groups (n=10) according to the product utilized: G1 (control)= silicone polisher (TDV), G2= 37% phosphoric acid (3M/ESPE) + pumice stone (SS White), G3= Micropol (DMC Equipment), G4= Opalustre (Ultradent) and G5= Whiteness RM (FGM Dental Products). Roughness and wear were the responsible variables used to analyze these surfaces in four stages: baseline, 60 s and 120 s after the micro-abrasion and after polishing, using a Hommel Tester T1000 device. After the tests, a normal distribution of data was verified, with repeated ANOVA analyses (p?0.05) which were used to compare each product in different stages. One-way ANOVA and Tukey tests were applied for individual comparisons between the products in each stage (p?0.05). Results: Means and standard deviations of roughness and wear (µm) after all the promoted stages were: G1=7.26(1.81)/13.16(2.67), G2=2.02(0.62)/37.44(3.33), G3=1.81(0.91)/34.93(6.92), G4=1.92(0.29)/38.42(0.65) and G5=1.98(0.53)/33.45(2.66). At 60 seconds, all products tended to produce less surface roughness with a variable gradual decrease over time. After polishing, there were no statistically significant differences between the groups, except for G1. Independent of the product utilized, the enamel wear occurred after the micro-abrasion. Conclusions: In this in vitro study, enamel micro-abrasion presented itself as a conservative approach, regardless of the type of the paste compound utilized. These products promoted minor roughness alterations and minimal wear. The use of phosphoric acid and pumice stone showed similar results to commercial products for the micro-abrasion with regard to the surface roughness and wear.

Micro-structural and compositional variations of hydrothermal epidote-group minerals from a peralkaline granite, Corupá Pluton, Graciosa Province, South Brazil, and their petrological implications

Epidote-group minerals, together with albite, quartz, fluorite, Al-poor and Fe-rich phyllosilicates, zircon, and minor oxides and sulphides, are typical hydrothermal phases in peralkaline alkali-feldspar granites from the Corupá Pluton, Graciosa Province, South Brazil. The epidote-group minerals occur as single crystals and as aggregates filling in rock interstices and miarolitic cavities. They display complex recurrent zoning patterns with an internal zone of ferriallanite-(Ce), followed by allanite-(Ce), then epidote-ferriepidote, and an external zone with allanite-(Ce), with sharp limits, as shown in BSE and X-ray images. REE patterns show decreasing fractionation degrees of LREE over HREE from ferriallanite to epidote. The most external allanite is enriched in MREE. LA-ICP-MS data indicate that ferriallanite is enriched (>10-fold) in Ti, Sr and Ga, and depleted in Mg, Rb, Th and Zr relative to the host granite. Allanite has lower Ga and Mn and higher Zr, Nb and U contents as compared to ferriallanite, while epidote is enriched in Sr, U and depleted in Pb, Zr, Hf, Ti and Ga. The formation of these minerals is related to the variable concentrations of HFSE, Ca, Al, Fe and F in fluids remaining from magmatic crystallization, in an oxidizing environment, close to the HM buffer. L-MREE were in part released by the alteration of chevkinite, their main primary repository in the host rocks.

Micro-organismos da subclasse Coccidia: resistência e implicações para o processamento de materiais de assistência à saúde

Este estudo teórico propõe uma reflexão sobre a resistência intrínseca da subclasse Coccidia, particularmente o gênero Cryptosporidium, considerado como um agente potencialmente patogênico para pacientes imunocomprometidos, e suas repercussões na prática assistencial. Atualmente, as diretrizes internacionais e nacionais aprovam como procedimento seguro a desinfecção química de alto nível de endoscópios digestivos, após sua limpeza. No entanto, estudos evidenciaram que micro-organismos da subclasse Coccidia, especificamente o Cryptosporidium, responsável por infecção entérica, são mais resistentes que as micobactérias e não são inativados pelos desinfetantes químicos de alto nível, exceto pelo Peróxido de Hidrogênio a 6% e 7,5%, formulação ainda não disponível no Brasil. Conclui-se que a legislação deve incluir este agente entre os micro-organismos teste para aprovação de desinfetantes químicos de alto nível e que as autoridades sanitárias devem se esforçar para garantir que os estabelecimentos de assistência à saúde tenham acesso a produtos eficazes contra o Cryptosporidium.

Valor da avaliação radiográfica pré-operatória dos defeitos ósseos no joelho nas revisões de artroplastia

OBJETIVO: Avaliar o valor da avaliação radiográfica pré-operatória nas revisões de artroplastias totais do joelho. MÉTODOS: Trinta e um joelhos operados no período de 2006 a 2008 em uma série consecutiva de casos de cirurgia de revisão de artroplastia total de joelho foram analisados retrospectivamente. CRITÉRIOS ANALISADOS: número de cunhas ou enxertos ósseos estruturados utilizados para preenchimento dos defeitos ósseos; localização das cunhas e enxertos ósseos utilizados e espessura média do polietileno utilizada. A classificação AORI era estabelecida previamente através de radiografias pré-operatórias segundo critérios preestabelecidos. Após a análise, os joelhos foram divididos em quatro grupos (I, IIA, IIB e III). RESULTADOS: O número médio de cunhas ou enxertos ósseos utilizados em cada joelho variou de maneira crescente entre os grupos (grupo I: 1,33; grupo IIA: 2; grupo IIB: 4,33; grupo III: 4,83) (P = 0,0012). As localizações mais comuns foram: medial na tíbia e posteromedial no fêmur. Não houve diferença estatisticamente significante na espessura do polietileno utilizado. CONCLUSÃO: A classificação AORI para defeitos ósseos no joelho baseada em radiografias pré-operatórias mostrou correlação crescente com a necessidade de utilização de cunhas e/ou enxertos estruturados na revisão de artroplastia total do joelho. Porém, até 46% dos joelhos dos grupos I e IIA apresentaram falhas ósseas de até 5mm não diagnosticadas através das radiografias pré-operatórias.

A swirler stabilized combustion chamber for a micro-gas turbine fuelled with natural gas

Micro-gas turbines are a good alternative for on-site power generation, since their operation is very reliable. The possibility of operating with various fuels increases versatility and, as a result, the usage of these devices. Focusing on a performance improvement of a tri-fuel low-cost micro-gas turbine, this work presents investigations of the inner flow of its combustion chamber. The aim of this analysis was the characterization of the flame structure by the temperature field of the chamber inner flow. The chamber was fuelled with natural gas. In the current chamber, a swirler and a reversed flow configuration were utilized to provide flame stabilization. The inner flow investigations were done with numerical analysis, which were compared to experimental data. The analysis of the inner flow was done with numerical simulations, which used the RSM turbulence model. A β-PDF equilibrium model was adopted to account for the turbulent combustion process. Different models of heat transfer were compared. Thermal radiation and specially heat conduction in the liner walls played significant roles on results.

Efficient 1535 nm light emission from an all-Si-based optical micro-cavity containing Er3+ and Yb3+ ions

This work reports on the construction and spectroscopic analyses of optical micro-cavities (OMCs) that efficiently emit at ~1535 nm. The emission wavelength matches the third transmission window of commercial optical fibers and the OMCs were entirely based on silicon. The sputtering deposition method was adopted in the preparation of the OMCs, which comprised two Bragg reflectors and one spacer layer made of either Er- or ErYb-doped amorphous silicon nitride. The luminescence signal extracted from the OMCs originated from the 4I13/2→4I15/2 transition (due to Er3+ ions) and its intensity showed to be highly dependent on the presence of Yb3+ ions.According to the results, the Er3+-related light emission was improved by a factor of 48 when combined with Yb3+ ions and inserted in the spacer layer of the OMC. The results also showed the effectiveness of the present experimental approach in producing Si-based light-emitting structures in which the main characteristics are: (a) compatibility with the actual microelectronics industry, (b) the deposition of optical quality layers with accurate composition control, and (c) no need of uncommon elements-compounds nor extensive thermal treatments. Along with the fundamental characteristics of the OMCs, this work also discusses the impact of the Er3+-Yb3+ ion interaction on the emission intensity as well as the potential of the present findings.

A simple-versatile approach to achieve all-Si-based optical micro-cavities

At present, solid thin films are recognized by their well established and mature processing technology that is able to produce components which, depending on their main characteristics, can perform either passive or active functions. Additionally, Si-based materials in the form of thin films perfectly match the concept of miniaturized and low-consumption devices-as required in various modern technological applications. Part of these aspects was considered in the present work that was concerned with the study of optical micro-cavities entirely based on silicon and silicon nitride thin films. The structures were prepared by the sputtering deposition method which, due to the adopted conditions (atmosphere and deposition rate) and arrangement of layers, provided cavities operating either in the visible (at ~ 670 nm) or in the near-infrared (at ~ 1560 nm) wavelength ranges. The main differential of the work relies on the construction of optical microcavities with a reduced number of periods whose main properties can be changed by thermal annealing treatments. The work also discusses the angle-dependent behavior of the optical transmission profiles as well as the use of the COMSOL software package to simulate the microcavities.

Embryonic and larval development of haliotis tuberculata coccinea reeve: an indexed micro-photographic sequence

[EN] First description of the complete embryo and larval development of the Canarian abalone (Haliotis tuberculata coccinea Reeve.) was conducted along 39 stages from fertilization to the appearance of the third tubule on the cephalic tentacles and illustrated in a microphotographic sequence. Eggs obtained by induced spawning with hydrogen peroxide from the GIA captive broodstock were stocked at a density of 10 eggs/mL and kept at 23 0.5 BC for 62 h until the formation of the third tubule. Live eggs and larvae were continuously observed on a 24 h basis at a 3400 magnification under transmitted light. At each stages, specific morphological features, illustrated by microscopic photographs, were described, as well as the time required for their apparition. Fertilized eggs diameter was 205 8 mm (mean SD), whereas length and width of larvae ready to undergo metamorphosis were 216.6 5.3 mmand 172 8.8 mm, respectively. Knowledge on the larval morphological development acquired through this study will contribute to the improvement of larval rearing techniques for this abalone species.

Proyecto piloto de Micro Áreas de Custodia Marina

[ES] En la charla se presenta un proyecto piloto que pretende impulsar una nueva estrategia para el desarrollo de actividades sostenibles de turismo activo en el medio marino que implique además la conservación y mejora de espacios de buena calidad ambiental, imprescindible para el desarrollo de dichas actividades. Es un modelo innovador de desarrollo sostenible, basado en áreas -fundamentalmente marinas- de pequeña dimensión, impulsadas por las administraciones locales, asociaciones, empresas del sector del ecoturismo y otras instituciones, en el que los propios usuarios colaboran en su conservación. Asímismo pueden ser un mecanismo de sensibilizacióny educación ambiental muy importante.

Las Micro-áreas marinas como modelo de gestión sostenible. Notas metodológicas para su implantación en la bahía de Gaira, Colombia

Máster Oficial en Gestión Costera

Propuesta de metodología para el análisis de conflictos y evaluación del Proyecto Micro Areas

Máster Oficial en Gestión Costera