Synthèse systématique des écrits : les instruments d’évaluation de la comorbidité psychiatrique présentée par les adolescent(e)s

Ce mémoire présente les résultats d’une synthèse systématique (SS) des écrits traitant des instruments d’évaluation multidimensionnelle des troubles concomitants qui peuvent être présentés par les adolescent(e)s. La SS a permis d’identifier 11 instruments en mesure d’évaluer les troubles comorbides de l’Axe I du DSM-IV, incluant chaque fois les troubles liés à l’utilisation de substances psychoactives (TUS). Une fois les instruments répertoriés, une seconde recherche fut effectuée afin identifier les études les ayant mis à l’épreuve du point de vue de leur validité et de leur fidélité diagnostique : 57 études furent identifiées. La robustesse méthodologique de ces études fut analysée à l’aide de la grille du QUADAS-2 et 47 études furent retenues pour l’échantillon final. Les résultats sont présentés par diagnostics (troubles liés à l’utilisation des substances (TUS) (obligatoire), trouble d’anxiété généralisée (TAG), épisode dépressif majeur (ÉDM), troubles des conduites (TC), trouble du déficit de l’attention /hyperactivité (TDA/H), état de stress post-traumatique (ÉSPT) et par instrument retenu. Suite à l’analyse des données recueillies, il s’avère difficile de comparer les instruments les uns aux autres, étant donnée la très grande diversité des échelles qu’ils contiennent, ainsi que les devis fort différents des études qui les ont mis à l’épreuve. Par contre, deux instruments se distinguent par la robustesse méthodologique des études à leur sujet, ainsi que leur excellente performance globale. Il s’agit du ChIPS et du K-SADS.

Modeling and analysis of a zipping elastomeric actuator

This thesis introduces and analyzes a dielectric elastomer actuator (DEA) working in zipping mode. Electrostatic zipping is a very familiar actuation principle used in silicon micro-electro-mechanical systems. With lower voltage supply, electrostatic zipping can provide great performance for forces and displacements of an elastic membrane. Applying this principle to dielectric elastomers, the softness of the material will provide better compliance compared to silicon materials. After the presentation of an analytical model, this thesis investigates how system geometry and elastomer pre-tensioning affect system response. Results highlight how a proper selection of system parameters makes it possible to improve system regulation and reduce operating voltage requirements. Potential applications of zipping DEAs are for microfluidic control and electro-forming.

Low-cost disposable ALT electrochemical microsensors for in-vitro hepatotoxic assessment

Liver-on-chip systems are widely seen as having the potential to replace animal testing for long-term liver toxicity assessments. However, such systems necessitate solutions, such as electrochemical microsensors, to provide information about the cells exposed to chemical compounds in a confined space. This study describes the development of microsensors for the detection of alanine-aminotransferase (ALT), an intracellular enzyme found in hepatocytes, for monitoring the viability of in-vitro hepatic cell cultures. The electrochemical sensors were developed by using screen printed electrodes functionalized by drop-casting. These technologies are intended to produce disposable and low-cost sensors that can easily be exchanged once their performance is degraded. The sensors are capable of measuring ALT in a microfluidic environment through the detection of changes in glutamate concentration. The microsensors were found to be stable for more than 60 days and were successfully tested using hepatocellular lysates to assess their capability to quantify ALT activity in a hepatic cell culture. These results open the way to their integration in liver bioreactors to assess hepatocellular toxicity in-vitro.

Synthèse systématique des écrits : les instruments d’évaluation de la comorbidité psychiatrique présentée par les adolescent(e)s.

Ce mémoire présente les résultats d’une synthèse systématique (SS) des écrits traitant des instruments d’évaluation multidimensionnelle des troubles concomitants qui peuvent être présentés par les adolescent(e)s. La SS a permis d’identifier 11 instruments en mesure d’évaluer les troubles comorbides de l’Axe I du DSM-IV, incluant chaque fois les troubles liés à l’utilisation de substances psychoactives (TUS). Une fois les instruments répertoriés, une seconde recherche fut effectuée afin identifier les études les ayant mis à l’épreuve du point de vue de leur validité et de leur fidélité diagnostique : 57 études furent identifiées. La robustesse méthodologique de ces études fut analysée à l’aide de la grille du QUADAS-2 et 47 études furent retenues pour l’échantillon final. Les résultats sont présentés par diagnostics (troubles liés à l’utilisation des substances (TUS) (obligatoire), trouble d’anxiété généralisée (TAG), épisode dépressif majeur (ÉDM), troubles des conduites (TC), trouble du déficit de l’attention /hyperactivité (TDA/H), état de stress post-traumatique (ÉSPT) et par instrument retenu. Suite à l’analyse des données recueillies, il s’avère difficile de comparer les instruments les uns aux autres, étant donnée la très grande diversité des échelles qu’ils contiennent, ainsi que les devis fort différents des études qui les ont mis à l’épreuve. Par contre, deux instruments se distinguent par la robustesse méthodologique des études à leur sujet, ainsi que leur excellente performance globale. Il s’agit du ChIPS et du K-SADS.

Quantitative composition and distribution of the silt fraction in surface sediments of the North-West African continental margin

Surface sediments from the continental slope and rise of North-West Africa between the Canary lslands and the Cape Verde Islands are mainly composed of silt-sized material (2-63 µm). A number of sampling profiles were run normal to the coast and the composition of the silt fraction was determined quantitatively by scanning electron microscope analysis. The carbonate portion of the sediment was found to be nearly exclusively of biogenic origin. The most important contributors are planktonic foraminifers and coccoliths with minor contributions derived from pteropods. Plankton-produced biogenic opal such as diatoms and radiolarians play a very minor role. The high production rates of opal-silica plankton which exists in the surface waters of the NW-African upwelling system does not give rise to corresponding increases of opal accumulation in the bottom sediment. Benthic producers consist mainly of foraminifers and molluscs but the entire input from benthic producers is extremely small. An exception to this occurs in the prodelta sediments of the Senegal river. Downslope particle transport is indicated by the occurrence of shallow-water coralline algae, ascidian sclerites and cliona boring chips and can be traced as far down as the continental rise. The non-carbonate silt fraction mostly consists of quartz which is derived as eolian dust from the Sahara desert by the Harmattan and the NE-Trade-wind system. The percentage of carbonate in the surface sediments directly indicates the relative proportions of autochthonous biogenic components and terrigenous allochthonous quartz particles.

The principles of beauty in colouring systematized /

Illustrations consist of color chips.

Utilizing urban tree debris : an analysis of alternatives for Chicago, Illinois /

Prepared in cooperation with Chicago Bureau of Forestry, Parkways, and Beautification.

Ablative Pyrolysis of Beetle-killed Trees

Thesis (Ph.D.)--University of Washington, 2016-06

Magnetic Devices and Techniques for the Study of Viscoelasticity of Biomaterials and Myocardial Forces

Thesis (Ph.D.)--University of Washington, 2016-06

Analysis of the effect of transverse modes on free-space optical interconnect performance

Vertical-cavity surface-emitting lasers (VCSELs) and microlenses can be used to implement free space optical interconnects (FSOIs) which do not suffer from the bandwidth limitations inherent in metallic interconnects. A comprehensive link equation describing the effects of both optical and electrical noise is introduced. We have evaluated FSOI performance by examining the following metrics: the space-bandwidth product (SBP), describing the density of channels and aggregate bandwidth that can be achieved, and the carrier-to-noise ratio (CNR), which represents the relative strength of the carrier signal. The mode expansion method (MEM) was used to account for the primary cause of optical noise: laser beam diffraction. While the literature commonly assumes an ideal single-mode laser beam, we consider the experimentally determined multimodal structure of a VCSEL beam in our calculations. It was found that maximum achievable interconnect length and density for a given CNR was significantly reduced when the higher order transverse modes were present in Simulations. However, the Simulations demonstrate that free-space optical interconnects are still a suitable solution for the communications bottleneck, despite the adverse effects introduced by transverse modes.

Flow focusing in microchannels

A volume-of-fluid numerical method is used to predict the dynamics of drop formation in an axi-symmetric microfluidic flow-focusing geometry for a liquid-liquid system. The Reynolds numbers and Weber numbers approximate those of a three-dimensional flow in recently published experiments. We compare the predicted drop formation with the experimental results at various flow rates, and discuss the mechanisms of drop formation in this context. Despite the differences in geometry, we find qualitative correspondence between the numerical and experimental results. Both end-pinching and capillary-wave instability are important for droplet break-up at the higher flow rates.

Heat and mass transfer during fry-drying of sewage sludge

Deep-frying, which consists of immersing a wet material in a large volume of hot oil, presents a process easily adaptable to dry rather than cook materials. A suitable material for drying is sewage sludge, which may be dried using recycled cooking oils (RCO) as frying oil. One advantage is that this prepares both materials for convenient disposal by incineration. This study examines fry-drying of municipal sewage sludge using recycled cooking oil. The transport processes occurring during fry-drying were monitored through sample weight, temperature, and image analysis. Due to the thicker and wetter samples than the common fried foods, high residual moisture is observed in the sludge when the boiling front has reached the geometric center of the sample, suggesting that the operation is heat transfer controlled only during the first half of the process followed by the addition of other mechanisms that allow complete drying of the sample. A series of mechanisms comprising four stages (i.e., initial heating accompanied by a surface boiling onset, film vapor regime, transitional nucleate boiling, and bound water removal) is proposed. In order to study the effect of the operating conditions on the fry-drying kinetics, different oil temperatures (from 120 to 180 degrees C), diameter (D = 15 to 25 mm), and initial moisture content of the sample (4.8 and 5.6 kg water(.)kg(-1) total dry solids) were investigated.

The effect of elasticity on drop creation in T-shaped microchannels

Polymeric microdrops of low viscosity, elastic fluids have been generated in T-shaped microfluidic devices using a cross-flow shear-induced drop generation process. Dilute (c/c* similar to 0.5) aqueous solutions of polyethylene oxide (PEO) of various molecular weights (3 x 10(5) -2 x 10(6) g/mol) were used as the drop phase fluids whilst silicone oils (5 mPa s

The properties of the International Classification of the External Cause of Injury when used as an instrument for injury prevention research

Objective: To demonstrate properties of the International Classification of the External Cause of Injury (ICECI) as a tool for use in injury prevention research. Methods: The Childhood Injury Prevention Study (CHIPS) is a prospective longitudinal follow up study of a cohort of 871 children 5 - 12 years of age, with a nested case crossover component. The ICECI is the latest tool in the International Classification of Diseases (ICD) family and has been designed to improve the precision of coding injury events. The details of all injury events recorded in the study, as well as all measured injury related exposures, were coded using the ICECI. This paper reports a substudy on the utility and practicability of using the ICECI in the CHIPS to record exposures. Interrater reliability was quantified for a sample of injured participants using the Kappa statistic to measure concordance between codes independently coded by two research staff. Results: There were 767 diaries collected at baseline and event details from 563 injuries and exposure details from injury crossover periods. There were no event, location, or activity details which could not be coded using the ICECI. Kappa statistics for concordance between raters within each of the dimensions ranged from 0.31 to 0.93 for the injury events and 0.94 and 0.97 for activity and location in the control periods. Discussion: This study represents the first detailed account of the properties of the ICECI revealed by its use in a primary analytic epidemiological study of injury prevention. The results of this study provide considerable support for the ICECI and its further use.