Métodos de avaliação da estabilidade implantar

Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Medicina Dentária

Biobased additives as biodegradability enhancers with application in TPU-based footwear components

Among the wide variety of materials employed in the manufacture of shoes, thermoplastic polyurethanes (TPUs) are one of the most widely used. Given its widespread use, and associated waste management problems, the development of more biodegradable and evironmentally compatible solutions is needed. In this work, a polyester-based TPU used in the footwear industry for outsoles production was modified by compounding with lignin, starch and cellulose at content of 4% (w/w). The biodegradability was evaluated by using agar plate tests with the fungi Aspergillus niger ATCC16404, the Gram-negative bacteria Pseudomonas aeruginosa ATCC9027 and an association of both (consortium), and soil tests at 37 °C and 58 °C. The obtained results evidenced a positive effect of the tested biobased additives, the most favourable results being registered with lignin. These results were corroborated by the structural modifications observed by FTIR analysis. Additionally, mechanical tests prove the suitability of using the lignin modified TPUs for footwear outsoles production.

How Much Does It Cost to Provide Antiretroviral Therapy for HIV/AIDS in Africa?

Background: Many African countries are rapidly expanding HIV/AIDS treatment programs. Empirical information on the cost of delivering antiretroviral therapy (ART) for HIV/AIDS is needed for program planning and budgeting. Methods: We searched published and gray sources for estimates of the cost of providing ART in service delivery (non-research) settings in sub-Saharan Africa. Estimates were included if they were based on primary local data for input prices. Results: 17 eligible cost estimates were found. Of these, 10 were from South Africa. The cost per patient per year ranged from $396 to $2,761. It averaged approximately $850/patient/year in countries outside South Africa and $1,700/patient/year in South Africa. The most recent estimates for South Africa averaged $1,200/patient/year. Specific cost items included in the average cost per patient per year varied, making comparison across studies problematic. All estimates included the cost of antiretroviral drugs and laboratory tests, but many excluded the cost of inpatient care, treatment of opportunistic infections, and/or clinic infrastructure. Antiretroviral drugs comprised an average of one third of the cost of treatment in South Africa and one half to three quarters of the cost in other countries. Conclusions: There is very little empirical information available about the cost of providing antiretroviral therapy in non-research settings in Africa. Methods for estimating costs are inconsistent, and many estimates combine data drawn from disparate sources. Cost analysis should become a routine part of operational research on the treatment rollout in Africa.

Autobiographical memory for stressful events: the role of autobiographical memory in posttraumatic stress disorder.

To provide the three-way comparisons needed to test existing theories, we compared (1) most-stressful memories to other memories and (2) involuntary to voluntary memories (3) in 75 community dwelling adults with and 42 without a current diagnosis of posttraumatic stress disorder (PTSD). Each rated their three most-stressful, three most-positive, seven most-important and 15 word-cued autobiographical memories, and completed tests of personality and mood. Involuntary memories were then recorded and rated as they occurred for 2 weeks. Standard mechanisms of cognition and affect applied to extreme events accounted for the properties of stressful memories. Involuntary memories had greater emotional intensity than voluntary memories, but were not more frequently related to traumatic events. The emotional intensity, rehearsal, and centrality to the life story of both voluntary and involuntary memories, rather than incoherence of voluntary traumatic memories and enhanced availability of involuntary traumatic memories, were the properties of autobiographical memories associated with PTSD.

Scholarly research productivity is not related to higher three-year licensure pass rates for physical therapy academic programs.

BACKGROUND: In the domain of academia, the scholarship of research may include, but not limited to, peer-reviewed publications, presentations, or grant submissions. Programmatic research productivity is one of many measures of academic program reputation and ranking. Another measure or tool for quantifying learning success among physical therapists education programs in the USA is 100 % three year pass rates of graduates on the standardized National Physical Therapy Examination (NPTE). In this study, we endeavored to determine if there was an association between research productivity through artifacts and 100 % three year pass rates on the NPTE. METHODS: This observational study involved using pre-approved database exploration representing all accredited programs in the USA who graduated physical therapists during 2009, 2010 and 2011. Descriptive variables captured included raw research productivity artifacts such as peer reviewed publications and books, number of professional presentations, number of scholarly submissions, total grant dollars, and numbers of grants submitted. Descriptive statistics and comparisons (using chi square and t-tests) among program characteristics and research artifacts were calculated. Univariate logistic regression analyses, with appropriate control variables were used to determine associations between research artifacts and 100 % pass rates. RESULTS: Number of scholarly artifacts submitted, faculty with grants, and grant proposals submitted were significantly higher in programs with 100 % three year pass rates. However, after controlling for program characteristics such as grade point average, diversity percentage of cohort, public/private institution, and number of faculty, there were no significant associations between scholarly artifacts and 100 % three year pass rates. CONCLUSIONS: Factors outside of research artifacts are likely better predictors for passing the NPTE.

Local models for exploratory analysis of hydrological extremes

Trend analysis is widely used for detecting changes in hydrological data. Parametric methods for this employ pre-specified models and associated tests to assess significance, whereas non-parametric methods generally apply rank tests to the data. Neither approach is suitable for exploratory analysis, because parametric models impose a particular, perhaps unsuitable, form of trend, while testing may confirm that trend is present but does not describe its form. This paper describes semi-parametric approaches to trend analysis using local likelihood fitting of annual maximum and partial duration series and illustrates their application to the exploratory analysis of changes in extremes in sea level and river flow data. Bootstrap methods are used to quantify the variability of estimates.

A methodology for characterising new lead-free solder paste formulations used for flip-chip assembly applications

The paper reports on the investigation of the rheological behaviour new lead-free solder pastes formulations for use in flip-chip assembly applications. The study is made up of three parts; namely the evaluation of the effect of plate geometry, the effect of temperature and processing environment and the effect of torsional frequencies on the rheological measurements. Different plate geometries and rheological tests were used to evaluate new formulations in terms of wall slip characteristics, linear viscoelastic region and shear thinning behaviour. A technique which combines the use of the creep-recovery and dynamic frequency sweep tests was used to further characterise the paste structure, rheological behaviour and the processing performance of the new paste formulations. The technique demonstrated in this study has wide utility for R & D personnel involved in new paste formulation, for implementing quality control procedures used in paste manufacture and packaging and for qualifying new flip-chip assembly lines

Learning Bayesian networks from data: An information-theory based approach

This paper provides algorithms that use an information-theoretic analysis to learn Bayesian network structures from data. Based on our three-phase learning framework, we develop efficient algorithms that can effectively learn Bayesian networks, requiring only polynomial numbers of conditional independence (CI) tests in typical cases. We provide precise conditions that specify when these algorithms are guaranteed to be correct as well as empirical evidence (from real world applications and simulation tests) that demonstrates that these systems work efficiently and reliably in practice.

La incidencia de los valores culturales en el voluntariado: el caso de Europa

La realidad del voluntariado es sumamente compleja hasta el punto de que resulta complicado definir y caracterizar el trabajo voluntario, dada la gran variedad de interpretaciones, motivaciones, variables sociodemográficas y aspectos culturales que configuran el perfil de los voluntarios. El objetivo de este trabajo es analizar la influencia conjunta de algunas variables sociodemográficas, así como de los valores culturales de índole secular o tradicional, sobre el perfil de los voluntarios en Europa. Además, se investiga qué variables orientan a los voluntarios hacia un determinado tipo de voluntariado u otro. Para ello se ha aplicado principalmente una metodología de regresión logística a partir de la información disponible en la European Value Study. Los resultados obtenidos ayudan a establecer una caracterización del voluntariado en Europa, y confirman la influencia de los valores culturales, en primer lugar, en la realización o no de trabajos de voluntariado, y en segundo lugar, en la elección que hacen estas personas del tipo de actividad con la que están comprometidos. Al analizar dos tipos de voluntariado de motivación supuestamente muy diferente, se concluye que existe un grupo de valores que influyen en ambos, aunque el sentido y la intensidad en la que lo hacen sea diferente; por otra parte, algunos valores tienen influencia o no en la realización de trabajos de voluntariado, dependiendo del tipo específico al que nos refiramos.

Predictors of attitudes toward inclusion of students with special educational needs in future education professionals

One of the main pillars in the development of inclusive schools is the initial teacher training. Before determining if it is necessary to make changes (and of what type) in training programs or curriculum guides related to the attention to diversity and inclusive education, the attitudes of future education professionals in this area should be analyzed. This includes the identification of the relevant predictors of inclusive attitudes. The research reported in this article pursued this objective, doing so with a quantitative survey methodology based on the use of cross-sectional structured data collection and statistical analyses related to the quality of the attitude questionnaire (factor analysis and Cronbach's alpha), descriptive statistics, correlations, hypothesis tests for difference of means, and regression analysis in order to predict attitudes towards inclusion in education. Firstly, the results show that the participants held very positive attitudes toward the inclusion of students with special educational needs. Particularly, older respondents, those with a longer training and, to a lesser extent, women and those who had been in touch with disabled people stood out within this attitude. Secondly, it is evidenced that self-transcendence values ​and, more weakly, contact, function as robust predictors of attitudes of future practitioners towards the inclusion of students with special needs. Some applications for the initial professionalization of educators are suggested in the discussion.

Neuromuscular adaptation during skill acquisition on a two degree-of-freedom target-acquisition task: Isometric torque production

In this study we attempted to identify the principles that govern the changes in neural control that occur during repeated performance of a multiarticular coordination task. Eight participants produced isometric flexion/extension and pronation/supination torques at the radiohumeral joint, either in isolation (e.g., flexion) or in combination (e.g., flexion - supination), to acquire targets presented by a visual display. A cursor superimposed on the display provided feedback of the applied torques. During pre- and postpractice tests, the participants acquired targets in eight directions located either 3.6 cm (20% maximal voluntary contraction [MVC]) or 7.2 cm (40% MVC) from a neutral cursor position. On each of five consecutive days of practice the participants acquired targets located 5.4 cm (30% MVC) from the neutral position. EMG was recorded from eight muscles contributing to torque production about the radiohumeral joint during the pre- and posttests. Target-acquisition time decreased significantly with practice in most target directions and at both target torque levels. These performance improvements were primarily associated with increases in the peak rate of torque development after practice. At a muscular level, these changes were brought about by increases in the rates of recruitment of all agonist muscles. The spatiotemporal organization of muscle synergies was not significantly altered after practice. The observed adaptations appear to lead to performances that are generalizable to actions that require both greater and smaller joint torques than that practiced, and may be successfully recalled after a substantial period without practice. These results suggest that tasks in which performance is improved by increasing the rate of muscle activation, and thus the rate of joint torque development, may benefit in terms of the extent to which acquired levels of performance are maintained over time.

Expression of the common heat-shock protein receptor CD91 is increased on monocytes of exposed yet HIV-1-seronegative subjects.

The significantly higher surface expression of the surface heat-shock protein receptor CD91 on monocytes of human immunodeficiency virus type-1 (HIV-1)-infected, long-term nonprogressors suggests that HIV-1 antigen uptake and cross-presentation mediated by CD91 may contribute to host anti-HIV-1 defenses and play a role in protection against HIV-1 infection. To investigate this further, we performed phenotypic analysis to compare CD91 surface expression on CD14+ monocytes derived from a cohort of HIV-1-exposed seronegative (ESN) subjects, their seropositive (SP) partners, and healthy HIV-1-unexposed seronegative (USN) subjects. The median fluorescent intensity (MFI) of CD91 on CD14+ monocytes was significantly higher in ESN compared with SP (P=0.028) or USN (P=0.007), as well as in SP compared with USN subjects (P=0.018). CD91 MFI was not normalized in SP subjects on highly active antiretroviral therapy (HAART) despite sustainable, undetectable plasma viraemia. Data in three SP subjects experiencing viral rebounds following interruption of HAART showed low CD91 MFI comparable with levels in USN subjects. There was a significant positive correlation between CD91 MFI and CD8+ T cell counts in HAART-naïve SP subjects (r=0.7, P=0.015). Increased surface expression of CD91 on CD14+ monocytes is associated with the apparent HIV-1 resistance that is observed in ESN subjects.

Structure-Property Relationships in Biaxially Deformed Polypropylene Nanocomposites

Semi-solid forming processes such as thermoforming and injection blow moulding are used to make much of today’s packaging. As for most packaging there is a drive to reduce product weight and improve properties such as barrier performance. Polymer nanocomposites offer the possibility of increased modulus
(and hence potential product light weighting) as well as improved barrier properties and are the subject of much research attention. In this particular study, polypropylene–clay nanocomposite sheets produced via biaxial deformation are investigated and the structure of the nanocomposites is quantitatively determined in order to gain a better understanding of the influence of the composite structure on mechanical properties. Compression moulded sheets of polypropylene and polypropylene/Cloisite 15A nanocomposite (5 wt.%) were biaxially stretched to different stretching ratios, and then the structure of
the nanocomposite was examined using XRD and TEM techniques. Different stretching ratios produced different degrees of exfoliation and orientation of the clay tactoids. The sheet properties were then investigated using DSC, DMTA, and tensile tests .It was found that regardless of the degree of exfoliation or
orientation, the addition of clay has no effect on percentage crystallinity or melting temperature, but it has an effect on the crystallization temperature and on the crystal size distribution. DMTA and tensile tests show that both the degree of exfoliation and the degree of orientation positively correlate with the dynamic mechanical properties and the tensile properties of the sheet.

The influence of wear paths produced by hip replacement patients during normal walking on wear rates

Variation in wear paths is known to greatly affect wear rates in vitro, with multidirectional paths producing much greater wear than unidirectional paths. This study investigated the relationship between multidirectional motion at the hip joint, as measured by aspect ratio, sliding distance, and wear rate for 164 hip replacements. Kinematic input from three-dimensional gait analysis was used to determine the wear paths. Activity cycles were determined for a subgroup of 100 patients using a pedometer study, and the relationship between annual sliding distance and wear rate was analyzed. Poor correlations were found between both aspect ratio and sliding distance and wear rate for the larger group and between annual sliding distance and wear rate for the subgroup. However, patients who experienced a wear rate <0.08 mm/year showed a strong positive correlation between the combination of sliding distance, activity levels, and aspect ratio and wear rate (adjusted r2?=?55.4%). This group may represent those patients who experience conditions that most closely match those that prevail in simulator and laboratory tests. Although the shape of wear paths, their sliding distance, and the number of articulation cycles at the hip joint affect wear rates in simulator studies, this relationship was not seen in this clinical study. Other factors such as lubrication, loading conditions and roughness of the femoral head may influence the wear rate.

Nitride-strengthened reduced activation ferritic/martensitic steels

Two nitride-strengthened reduced activation ferritic/martensitic (RAFM) steels with different Mn contents were investigated. The experimental steels were designed based on the chemical composition of Eurofer 97 steel but the C content was reduced to an extremely low level. Microstructure observation and hardness tests showed that the steel with low Mn content (0.47 wt.%) could not obtain a full martensitic microstructure due to the inevitable δ-ferrite independent of cooling rate after soaking. This steel showed similar room temperature strength and higher strength at 600 °C, but lower impact toughness, compared with Eurofer 97 steel. Fractography of the Charpy impact specimen revealed that the low room temperature toughness should be related to the Ta-rich inclusions initiating the cleavage fracture. The larger amount of V-rich nitrides and more dissolved Cr in the matrix could be responsible for the strength being similar to Eurofer 97 steel. In the second steel developed from the first steel by increasing the Mn content from 0.47 wt.% to 3.73 wt.%, a microstructure of full martensite could be obtained.