How much cultural events are "worth" for host communities: Case of Faz Música Lisboa

This paper studies the economic and social impact of Faz Música Lisboa on the segment of society that feels from any direct or indirect consequence due to its existence. A qualitative research based on surveys and interviews is made to retract a list of the benefits and costs that each stakeholder perceives. Relying on the quantifiable variables, it is performed a cost-benefit analysis to measure how much the event is “worth” for the community. I conclude this is a viable project, as it brings a positive net benefit to the society, value that could increase with a higher institutional support.

Experimental infection of the bat tick Carios fonsecai (Acari: Ixodidae) with the rabies virus

Introduction This study assessed the viability of the rabies virus in the argasid tick Carios fonsecai following experimental infection. Methods The mouse inoculation test (MIT), fluorescent antibody test (FAT) and polymerase chain reaction (PCR) were used. The rabies virus was administered to ticks via the intra-coelomic route, and the ticks were sacrificed at different time points. Results The inoculated ticks were negative for rabies according to the MIT. Ticks macerated with rabies virus were positive according to the MIT and FAT. All of the tick lots tested by PCR were positive. Conclusions The rabies virus became unviable shortly after its inoculation into tick bodies. Ticks are not likely to play an important role in the epidemiology of rabies.

Estudo experimental de um sistema BIPV/T-PCM

A União Europeia tem dado cada vez mais enfoque à eficiência energética nos edifícios e à sua capacidade de produção de energia, tendo lançado a directiva “Energy Performance of Buildings Directive” com o intuito de que até 31 de Dezembro de 2018 todos os edifícios novos sejam “nZEB-nearly Zero Energy Building”, o que significa que devem por um lado diminuir o seu consumo energético, aumentando a sua eficiência, e por outro lado produzir localmente e através de fontes de energias renováveis toda, ou quase toda, a energia de que necessitam. A presente tese está integrada no Projecto “Frame – Prefabricated systems (modules) for low-energy buildings: design, prototyping and testing” (Ref: PTDC/AURAQI-AQI/117782/2010) que está a ser desenvolvido na Unidade de Eficiência Energética do Laboratório Nacional de Energia e Geologia (LNEG). Neste trabalho é desenvolvido e analisado um sistema BIPV/T-PCM (Building Integrated Photovoltaic Thermal – Phase Change Materials) que engloba todo um novo conceito de captação, armazenamento e gestão da energia solar em fachadas. Este sistema é composto por um módulo fotovoltaico, uma bateria de PCM (Materiais de Mudança de Fase) e todo um sistema de fluxo de ar que permite a gestão da energia colectada e armazenada. Foi também desenvolvido teoricamente um código de gestão energética para a manipulação do sistema. O sistema em estudo apoia-se em três objectivos principais: aquecer no inverno; arrefecer no verão; e aumentar a eficiência do PV arrefecendo-o. Na sequência do trabalho realizado verificou-se que o conceito do sistema em estudo alcança alguns dos objectivos propostos, tendo ainda potencial para se continuar o seu desenvolvimento. O sistema em estudo é um sistema inovador, e como tal está a ser registada uma patente com base no conceito desenvolvido.

Hematologic profile of hematophagous Desmodus rotundus bats before and after experimental infection with rabies virus

Introduction Hematophagous Desmodus rotundus bats play an important role in the rabies lifecycle. This study describes the hematological profile of these bats before and after experimental infection with rabies virus. Methods Cells counts were performed in a Neubauer chamber. Results The average values of erythrocytes and leucocytes counts in blood before experimental infections were 9.97 × 106mm3 and 4.80 × 103mm3, respectively. Neutrophils represented 69.9% of white blood cells and the lymphocytes represented 26.9%. Following the experimental infections, the average numbers of erythrocytes and leucocytes was 9.43 × 106mm3 and 3.98 × 103mm3, respectively. Neutrophils represented 40% of white blood cells and the lymphocytes represented 59%. Conclusions The hematological profile given in this study can serve as reference values for D. rotundus bats.

The thermal effects on the methanol-to-olefins reaction: A modelling and experimental approach

With the projection of an increasing world population, hand-in-hand with a journey towards a bigger number of developed countries, further demand on basic chemical building blocks, as ethylene and propylene, has to be properly addressed in the next decades. The methanol-to-olefins (MTO) is an interesting reaction to produce those alkenes using coal, gas or alternative sources, like biomass, through syngas as a source for the production of methanol. This technology has been widely applied since 1985 and most of the processes are making use of zeolites as catalysts, particularly ZSM-5. Although its selectivity is not especially biased over light olefins, it resists to a quick deactivation by coke deposition, making it quite attractive when it comes to industrial environments; nevertheless, this is a highly exothermic reaction, which is hard to control and to anticipate problems, such as temperature runaways or hot-spots, inside the catalytic bed. The main focus of this project is to study those temperature effects, by addressing both experimental, where the catalytic performance and the temperature profiles are studied, and modelling fronts, which consists in a five step strategy to predict the weight fractions and activity. The mind-set of catalytic testing is present in all the developed assays. It was verified that the selectivity towards light olefins increases with temperature, although this also leads to a much faster catalyst deactivation. To oppose this effect, experiments were carried using a diluted bed, having been able to increase the catalyst lifetime between 32% and 47%. Additionally, experiments with three thermocouples placed inside the catalytic bed were performed, analysing the deactivation wave and the peaks of temperature throughout the bed. Regeneration was done between consecutive runs and it was concluded that this action can be a powerful means to increase the catalyst lifetime, maintaining a constant selectivity towards light olefins, by losing acid strength in a steam stabilised zeolitic structure. On the other hand, developments on the other approach lead to the construction of a raw basic model, able to predict weight fractions, that should be tuned to be a tool for deactivation and temperature profiles prediction.

Heinrich e Cécile Daniker-Haller - A música doméstica na vida de um casal de negociantes entre Zurique e o Rio de Janeiro na primeira metade do século XIX

O casal de suíços, Heinrich (1795–1866) e Cécile Däniker-Haller (1816–1887), com seus filhos, viveu no Rio de Janeiro entre 1828 e 1852. Comerciantes prósperos, cosmopolitas e melômanos, deixaram grande quantidade de informações sobre suas atividades de música em ambiente doméstico daquele período, mas também depois de terem voltado a se estabelecer na Suíça. O Genealogisches Archiv der Helene und Cécile Rübel Familienstiftung (FA HCR), na cidade de Zurique, documenta a história desta família. As informações registradas pelo casal estudado, principalmente em forma de cartas e diários, permitem-nos conhecer e analisar a prática musical em ambiente doméstico das famílias estrangeiras no Rio de Janeiro, e demonstrar quais eram os repertórios por eles utilizados. Entre as conclusões tiradas, inclui-se o fato de que o romantismo alemão teria feito sua entrada no ambiente musical brasileiro através dos salões musicais das famílias estrangeiras, exatamente como foi o caso em outras cidades do mundo não germânico. Nos documentos deixados pela família Däniker-Haller encontram-se os mais antigos testemunhos até hoje encontrados da execução de Lieder de Schubert em ambiente doméstico no Rio de Janeiro. Por outro lado, a prática da Hausmusik na cidade de Zurique vem descrita e comparada àquela carioca. A análise destes relatos também nos permite descrever a diferença que havia entre os eventos musicais em ambiente doméstico íntimo e informal, e os "salões musicais", onde diletantes se produziam em esfera semi-pública previamente preparados e ensaiados, e a marcante diferença no repertório destes dois tipos de eventos sociais.

The effectiveness of a rotavirus vaccine in preventing hospitalizations and deaths presumably due to acute infectious diarrhea in Brazilian children: a quasi-experimental study

INTRODUCTION: Rotavirus is the main etiologic agent of acute infectious diarrhea in children worldwide. Considering that a rotavirus vaccine (G1P8, strain RIX4414) was added to the Brazilian vaccination schedule in 2006, we aimed to study its effectiveness and safety regarding intestinal intussusception. METHODS: A quasi-experimental trial was performed in which the primary outcome was the number of hospitalizations that were presumably due to acute infectious diarrhea per 100,000 children at risk (0-4 years old). The secondary outcomes included mortality due to acute infectious diarrhea and the intestinal intussusception rates in children in the same age range. We analyzed three scenarios: Health Division XIII of the State of São Paulo (DRS XIII) from 2002 to 2008, the State of São Paulo, and Brazil from 2002 to 2012. RESULTS: The averages of the hospitalization rates for 100,000 children in the pre- and post-vaccination periods were 1,413 and 959, respectively, for DRS XIII (RR=0.67), 312 and 249, respectively, for the State of São Paulo (RR=0.79), and 718 and 576, respectively, for Brazil (RR=0.8). The mortality rate per 100,000 children in the pre- and post-vaccination periods was 2.0 and 1.3, respectively, for DRS XIII (RR=0.66), 5.5 and 2.5, respectively, for the State of São Paulo (RR=0.47), and 15.0 and 8.0, respectively, for Brazil (RR=0.53). The average annual rates of intussusception for 100,000 children in DRS XIII were 28.0 and 22.0 (RR=0.77) in the pre- and post-vaccination periods, respectively. CONCLUSIONS: A monovalent rotavirus vaccine was demonstrated to be effective in preventing the hospitalizations and deaths of children that were presumably due to acute infectious diarrhea, without increasing the risk of intestinal intussusception.

A formação em rastreio e intervenções breves do álcool muda as atitudes dos profissionais de saúde ocupacional? : estudo quasi experimental exploratório para uma estratégia para o meio laboral

RESUMO - Estudos anteriores nos Cuidados de Saúde Primários (CSP) apontam para um incremento da Deteção Precoce (DP) e Intervenções Breves (IB) em pacientes com Problemas Ligados ao Álcool (PLA) após formação apropriada dos profissionais de saúde (com melhoria das suas atitudes). Este estudo quasi experimental, exploratório, é pioneiro no âmbito da Saúde Ocupacional (SO) para a implementação de Rastreio/DP e IB nos PLA. O objetivo principal foi avaliar se uma formação sobre Rastreio/DP e IB pode melhorar as atitudes dos profissionais de SO ao lidar com os PLA em Meio Laboral (PLAML). Foi aplicado um questionário em duas partes: Q1/pré-formação (variáveis sociodemográficas, profissionais, competências em alcoologia, experiência pessoal com álcool/familiares com PLA, dificuldades em lidar com trabalhadores com PLA, AUDIT-C e SAAPPQ) e Q2/pós-formação (avaliação da formação e das atitudes SAAPPQ - Adequação, Legitimidade, Motivação, Autoestima e Satisfação). Os resultados na amostra (N=39) revelaram um aumento sobretudo na Adequação e Satisfação. No entanto, naqueles com níveis baixos das atitudes pré-formação constou-se melhoria das atitudes à excepção da Autoestima e foram encontradas algumas associações com as características do perfil inicial dos participantes. Sugerem-se estudos posteriores para identificação de pacotes formativos mais efetivos e propostas para um Plano integrador de RIB para PLAML

Análise experimental da resistência ao corte do núcleo interior de alvenarias de pano múltiplo consolidadas com injecção de grouts

A quantidade de edifícios em degradação em Portugal que necessita de reabilitação é bastante elevada. As alvenarias antigas e históricas por vezes apresentam um estado avançado de degradação por ineficiente concepção ou por falta de manutenção. Desta forma as alvenarias necessitam de acções de reforço e consolidação com o intuito de fortalecer as suas resistências a diversos tipos de carregamentos. A presente dissertação está relacionada com uma técnica de consolidação das mais utilizadas e actuais, a injecção de grouts em alvenarias. O reforço por injecção de grouts é bastante utilizado em alvenarias de pano múltiplo, onde permite uma maior coesão entre materiais, uniformidade de tensões e continuidade de panos. Os principais objectivos de consolidação de uma alvenaria através da técnica de injecção de grouts são: a ocupação de espaços vazios de forma a aumentar a sua rigidez e a sua resistência; e o restabelecimento das ligações entre panos que ao longo do tempo deixou de existir, ou seja, um comportamento monolítico quando aplicado um carregamento vertical ou horizontal como um sismo. Daí a importância da análise de resistência ao corte numa da alvenaria de pano múltiplo. O presente trabalho teve uma componente laboratorial muito extensa, onde se efectuou injecções em modelos paralelipipédicos simulando o núcleo interior de uma parede de alvenaria antiga. O grout constituído por cal hidraúlica, superplastificante e água foi injectado no molde com um dos meios porosos de um dos dois materiais, calcário ou cerâmico. Após a cura cortaram-se em fatias os provetes e analisou-se a velocidade de propagação de ultra-sons com dois tipos de trandutores (cilíndricos e cónicos). Os ensaios mecânicos utilizados foram o diagonal test e o ensaio de corte directo de modo a determinar a resistência ao corte e finalmente comparou-se os valores dos ensaios para determinação das propriedades. Ainda com o intuito de avaliar as ligações grout-partícula do meio poroso foram avaliadas algumas fotografias tiradas a partir da lupa binocular. A técnica de injecção de grouts demonstrou-se uma técnica muito interessante e eficiente na análise de corte, no entanto esta técnica apresenta melhores resultados quando é utilizada em consonância com outras técnicas.

Effects of circular myotomy on the healing of esophageal suture anastomosis: an experimental study

For esophageal reconstruction in newborns with esophageal atresia, esophageal reunion with an end-to-end anastomosis is the ideal procedure, although it may result in leaks and strictures due to tension on the suture line, mainly in cases with a wide gap between the ends. Circular myotomy (Livaditis' procedure) is the best method to elongate the proximal esophageal pouch and reduce anastomotic tension. This experimental investigation in dogs was undertaken to attempt to verify that circular myotomy decreases the anastomotic leak rate in newborns with wide gap esophageal atresia, and to analyze whether the technique promotes morphologic changes in the anastomotic scar. A pilot study demonstrated that it is necessary to resect more than 8 cm (40% of the total esophageal length) in order to obtain high leak rates. In the experimental project, such resection was performed in dogs divided into two groups (control group, anastomosis only, and experimental group, anastomosis plus circular myotomy in the proximal esophageal segment). The animals were killed in the 14th postoperative day, submitted to autopsy, and were evaluated as to the presence of leaks and strictures, as well as to the features (macroscopic and microscopic aspects) of the anastomosis. Leak rates were the same in both groups. Morphometric analysis revealed that in animals in the experimental group, the anastomotic scar was thinner than the control animals, and the isolated muscular manchette distal to the site of myotomy was replaced by fibrous tissue. Correspondingly, a decreased number of newly formed small vessels were noted in the experimental animals, compared to control animals. We concluded that circular myotomy does not decrease the incidence of anastomotic leaks, and it also promotes deleterious changes in anastomotic healing.

Megabladder in experimental Chagas disease: pathological features of the bladder wall

Mega-organs, primarily in the digestive tract, are well known to occur in chronic Chagas disease. Acute experimental infection with Trypanosoma cruzi results in parasitism of a wide range of cells, tissues, and organs, including the urinary bladder. Infection of BALB/c mice with 100,000 bloodstream forms of the Y strain of T. cruzi induced acute infection with intense parasitism of all layers of the urinary bladder. Parasites were found in the mucosa, lamina propria, muscular, adventitial connective, and fat tissue. Desquamate epithelial cells with amastigotes in the bladder lumen were also found. After 60 days of infection, mice inoculated with 50 bloodstream forms developed dilated, thin-walled bladders that had inflammatory infiltrates and foci of fibrosis replacing areas of damaged muscular layer. These lesions result from direct damage to the muscle fibers by the T. cruzi, leading to myosites, muscle damage, and scarring. Direct damage of paraganglia cells secondary to parasitism, leading to dilatation, damage of muscle fibers, and scarring with replacement of muscular tissue with connective tissue, should also be considered as a cause of functional disturbance of the urinary bladder.

Effect of hyperbaric oxygen on the regeneration of experimental crush injuries of nerves

Hyperbaric oxygen has been successfully used on treatment of acute ischemic injuries involving soft tissues and chronic injuries. In nerve crush injuries, the mechanisms involved are very similar to those found in ischemic injuries. Consequently, it is logical to hypothesize that hyperbaric oxygen should improve nerve repair, which is a critical step on functional recovery. In the present study, we created standard nerve crush injuries on sciatic nerves of rats, which underwent treatment with hyperbaric oxygen. Results were assessed by functional evaluation using walking-track analysis. The functional recovery indexes observed did not differ from control group. We concluded that hyperbaric oxygen therapy, in the schedule used, had no influence on functional recovery after nerve crush injuries.

Experimental determination of bone cortex holding power of orthopedic screw

Cylindrical specimens of bone measuring 15 mm in diameter were obtained from the lateral cortical layer of 10 pairs of femurs and tibias. A central hole 3.2 mm in diameter was drilled in each specimen. The hole was tapped, and a 4.5 mm cortical bone screw was inserted from the outer surface. The montage was submitted to push-out testing up to a complete strip of the bone threads. The cortical thickness and rupture load were measured, and the shear stress was calculated. The results were grouped according to the bone segment from which the specimen was obtained. The results showed that bone cortex screw holding power is dependent on the bone site. Additionally, the diaphyseal cortical bone tissue is both quantitatively and qualitatively more resistant to screw extraction than the metaphyseal tissue.

Development of an experimental setup for metal cutting research

Analytical, numerical and experimental models have been developed over time to try to characterize and understand the metal cutting process by chip removal. A true knowledge of the cutting process by chip removal is required by the increasing production, by the quality requirements of the product and by the reduced production time, in the industries in which it is employed. In this thesis an experimental setup is developed to evaluate the forces and the temperature distribution in the tool according to the orthogonal cutting model conditions, in order to evaluate its performance and its possible adoption in future works. The experimental setup is developed in a CNC lathe and uses an orthogonal cutting configuration, in which thin discs fixed onto a mandrel are cut by the cutting insert. In this experimental setup, the forces are measured by a piezoelectric dynamometer while temperatures are measured by thermocouples placed juxtaposed to the side face of the cutting insert. Three different solutions are implemented and evaluated for the thermocouples attachment in the cutting insert: thermocouples embedded in thermal paste, thermocouples embedded in copper plate and thermocouples brazed in the cutting insert. From the tests performed in the experimental setup it is concluded that the adopted forces measurement technique shows a good performance. Regarding to the adopted temperatures measurement techniques, only the thermocouples brazed in the cutting insert solution shows a good performance for temperature measurement. The remaining solutions show contact problems between the thermocouple and the side face of the cutting insert, especially when the vibration phenomenon intensifies during the cut. It is concluded that the experimental setup does not present a sufficiently robust and reliable performance, and that it can only be used in future work after making improvements in the assembly of the thermocouples.