Validade cruzada de equações de predição da aptidão cardiorrespiratória sem testes de exercício em idosos

O condicionamento cardiorrespiratório pode ser caracterizado como sendo um dos componentes da aptidão cardiorrespiratória, estando diretamente associado aos níveis de saúde e qualidade de vida. Existem formas diversas para se avaliar os níveis de condicionamento cardiorrespiratório durante a realização de exercícios, tanto de forma direta como indireta. Foi realizado um estudo do tipo transversal contando com idosos voluntários acima dos 60 anos, admitidos entre março de 2005 e abril de 2008, todos participantes do Projeto Idosos em Movimento Mantendo a Autonomia (IMMA), coordenado pelo Laboratório de Atividade Física e Promoção da Saúde (LABSAU) do Instituto de Educação Física e Desportos da Universidade do Estado do Rio de Janeiro (IEFD-UERJ) e implementado em parceria com a Universidade Aberta da Terceira Idade (UnATI-UERJ) com o objetivo de realizar a validação cruzada de equações para estimativa da ACR sem exercícios em amostra de idosos brasileiros. Portanto, esta pesquisa identificou evidências para se estimar a aptidão cardiorrespiratória através de um método sem exercícios apresentando baixo custo e risco a saúde dos idosos, desta forma, não necessitando a utilização de locais específicos e com equipamentos como bicicletas e esteiras ergométricas e também não havendo a necessidade de profissionais especializados na aplicação dos referidos testes

Coarse optical orthogonal frequency division multiplexing for optical datacommunication applications

We propose a new low-cost solution using orthogonal transmission of non-return-to-zero and carrierless-amplitude-and-phase format data to realize a coarse OFDM transmission system. Using low bandwidth electronics and optoelectronic components, the system is demonstrated at 37.5Gb/s. © 2011 OSA.

GHz modulation of carbon nanotube cathodes for microwave amplifiers

Cold cathodes based on carbon nanotubes (CNs) allow to produce a pulsed/directly modulated electron beam. Using an array of vertically aligned CNs that exhibit an aspect ratio of around 200, we demonstrated the modulation of a 1.5 A/cm2 beam at 1.5 GHz frequency. Such CN cathodes are very promising for their use in a new generation of compact and low cost microwave amplifiers that operates between 30 and 100 GHz. ©2005 IEEE.

Carbon nanotube cathodes as electron sources for microwave amplifiers

Cold cathodes based on carbon nanotubes allow to produce a modulated electron beam. Using an array of vertically aligned CNs that exhibit an aspect ratio of about 200, we demonstrated the modulation of a high current density beam (∼ 1 A/cm2) at 1.5 and 32 GHz frequencies. Such CN cathodes are very promising for their use in a new generation of compact, highly efficient and low cost amplifiers that operate between 10 and 100 GHz. © 2007 IEEE.

Analysis and simulation of combustion oscillations in a laboratory spray combustor

The unstable combustion that can occur in combustion chambers is a major problem for aeroengines and ground-based industrial gas turbines. Nowadays, CFD provides a flexible, low cost tool to supplement direct measurement. This paper presents simulations of combustion oscillations in a liquid-fuelled experimental rig at the University of Cambridge. Linear acoustic theory was used to describe the acoustic waves propagating upstream and downstream of the combustion zone and to develop inlet and outlet boundary conditions just upstream and downstream of the combustion region enabling the CFD calculation to be efficiently concentrated on the combustion zone. A combustion oscillation was found to occur with its predicted frequency in good agreement with experimental measurements. More details about the unstable combustion can be obtained from the simulation results. The approach developed here is expected to provide a powerful tool for the design and operation of stable combustion systems. Copyright © 2009 by ASME.

Dynamics of bigeye (Thunnus obesus) and yellowfin (T. albacares) tuna in Hawaii’s pelagic fisheries: analysis of tagging data with a bulk transfer model incorporating size-specific attrition

Tag release and recapture data of bigeye (Thunnus obesus) and yellowfin tuna (T. albacares) from the Hawaii Tuna Tagging Project (HTTP) were analyzed with a bulk transfer model incorporating size-specific attrition to infer population dynamics and transfer rates between various fishery components. For both species, the transfer rate estimates from the offshore handline fishery areas to the longline fishery area were higher than the estimates of transfer from those same areas into the inshore fishery areas. Natural and fishing mortality rates were estimated over three size classes: yellowfin 20–45, 46–55, and ≥56 cm and bigeye 29–55, 56–70, and ≥71 cm. For both species, the estimates of natural mortality were highest in the smallest size class. For bigeye tuna, the estimates decreased with increasing size and for yellowfin tuna there was a slight increase in the largest size class. In the Cross Seamount fishery, the fishing mortality rate of bigeye tuna was similar for all three size classes and represented roughly 12% of the gross attrition rate (includes fishing and natural mortality and emigration rates). For yellowfin tuna, fishing mortality ranged between 7% and 30%, the highest being in the medium size class. For both species, the overall attrition rate from the entire fishery area was nearly the same. However, in the specific case of the Cross Seamount fishery, the attrition rate for yellowfin tuna was roughly twice that for bigeye. This result indicates that bigeye tuna are more resident at the Seamount than yellowfin tuna, and larger bigeye tunas tend to reside longer than smaller individuals. This may result in larger fish being more vulnerable to capture in the Seamount fishery. The relatively low level of exchange between the Sea-mount and the inshore and longline fisheries suggests that the fishing activity at the Seamount need not be of great management concern for either species. However, given that the current exploitation rates are considered moderate (10–30%), and that Seamount aggregations of yellowfin and bigeye tuna are highly vulnerable to low-cost gear types, it is recommended that further increases in fishing effort for these species be monitored at Cross Seamount.

Utilisation of vegetable leaves for carp production

The results of two sets of experiments on mono-culture of grass carp (Ctenopharyngodon idella) and mixed culture of carps (grass carp 50 : catla 20 : rohu 15 : mrigal 15) fed exclusively with vegetable leaves are reported. The experiments were conducted with two replicates each in 0.02 ha ponds of Wastewater Aquaculture Division of the Central Institute of Freshwater Aquaculture, Rahara during 1991-93. Monoculture of grass carp stocked at 1000/ha demonstrated an average net production of 21.0 kg/ 0.02 ha/8 months (1501 kg/ha/yr). Mixed culture of carps stocked at 5000 /ha recorded an average net production of 22.5 kg/0.02 ha/8 months (1903.7 kg/ha/yr). Field studies revealed that water bind weed (Ipomoea aquatica) is the most preferred feed of grass carp amongst vegetable leaves followed by amaranths (Amaranthus gangeticus and Amaranthus viridis), cauliflower (Brassica oleracia var. votrytis) and cabbage (Brassica oleracia var. capitata) leaves. Through selection of highly productive leaf vegetables and suitable crop planning on fallow fish pond dykes, round the year feeding programme of grass carp has been explored. Recycling of sewage effluent for vegetable production and utilisation of vegetable leaves for fish production is considered an ideal way of integrated resource management for low cost production.

Studies on paddy-cum-fish culture under different land situations

Paddy fields can be broadly classified on the basis of land situations viz. Upland - Shallow water (10-30 cm), Medium land-medium deepwater (30-100 cm) and Low land-deepwater (above 100 cm). Three major systems of paddy-cum-fish culture, viz. (A) high yielding paddy varieties (H.Y.V) and air-breathing fish under Upland, (B) H.Y.V./local paddy and Tilapia/common carp under Medium land and (C) deepwater paddy and major Indian carps under Low land situations have been successfully investigated in the farmers' fields and at the Research Stations (1982-92). Effects of low-cost artificial feeding on growth, yield and management practices of different types of fish showed a considerable increase of rice and fish yields and a decrease in insect-pest incidence. Under Upland situation, short duration H.Y.V. in combination with fast-growing air breathing fish was studied thrice a year (summer, winter & autumn seasons). Combined rice and fish culture produced highest yields in all the seasons than in the control.

Nanostructuring of materials for device and sensor applications

The recent developments in nanotechnology are reviewed, with particular emphasis on its application in microsystem technology where increased reliability is achieved by integrating the sensor and the readout electronics on the same substrate. New applications may be possible using integrated micromechanical clips to connect optic fibers and components in integrated silicon systems. Some of the key developments in enabling technologies are also described, including the control of thin film deposition, nanostructuring to tailor the properties of thin film, silicon micromachining to make sensors, and microclips for the low-cost assembly of integrated optical microsystems.

Hybrid potential flow-streamtube method for modelling VAWT-flowfield interactions

When designing vertical-axis wind turbines (VAWTs) for deployment in the urban environment, it is desirable to have a low-cost computational model that allows for modelling the coupled interaction of the turbine with the flowfleld. Such a method is presented in this paper, It combines a variation of the multiple streamtube model with a potential method to model flowfleld interactions. A method referred to as "streamtube surgery" is used to couple the influence of the flowfleld with the performance model of the VAWT. This tool is used to explore the instantaneous and cycle-averaged flowflelds of VAWTs. It can also be used to evaluate the influence on performance of multiple VAWTs in dense arrays or to quantify blockage effects of a VAWT in wind tunnel testing.

Parameter measurement for heavy-vehicle fuel consumption modelling

A mathematical model is developed to predict the energy consumption of a heavy vehicle. It includes the important factors of heavy-vehicle energy consumption, namely engine and drivetrain performances, losses due to accessories, aerodynamic drag, rolling resistance, road gradients, and driver behaviour. Novel low-cost testing methods were developed to determine engine and drivetrain characteristics. A simple drive cycle was used to validate the model. The model is able to predict the fuel use for a 371 tractor-semitrailer vehicle over a 4 km drive cycle within 1 per cent. This paper demonstrates that accurate and reliable vehicle benchmarking and model parameter measurement can be achieved without expensive equipment overheads, e.g. engine and chassis dynamometers.

Suitable sites for sustainable aquaculture development in Mymensingh, Bangladesh: A GIS methodological perspective

A GIS study was carried out to find out the sites suitable for aquaculture in Mymensingh region. A number of criteria were selected for GIS modeling followed by the approach of Kapetsky (1994). The criteria were developed from a range of existing data sources such as, surface and underground water level, availability of feed ingredients and animal wastes, sources of fish fry, market facilities, extension support and communication facilities for aquaculture development. The data were located, collected and compiled from different GOs and NGOs located in the region along with primary data from the field survey wherever necessary and then prepared for computer analyses. Using the database, a series of GIS models were developed in order to ascertain and prioritize the most suitable areas for aquaculture development in the region. Out of total 407,528 ha available lands in the region, the study identified 99,415 ha very suitable and 302,754 ha moderately suitable for aquaculture promotion. Result of the study is indicative to the modeling power of GIS for aquaculture application and could be used to refine the models in future, particularly if it is supported with further detail field data. To get a more concrete and complete model, detailed study should be made available on the availability of mustard oil cake, rice bran, wheat bran, and usable animal and urban wastes that could be used as low-cost feed for sustainable aquaculture.

Monoculture of three native air breathing fishes in homestead ditches and plastic barrels

Six on-farm trials were conducted from 1 August to 23 November 2004 in two different environments such as homestead ditches (10 to 17 square meters) and plastic barrels (240 liters) to develop techniques for nonoculture [sic] of climbing perch, Anabas testudineus, stinging catfish, Heteropneustes fossilis and walking catfish, Clarias batrachus for poor and landless people who have no access to pond. Stocking density for ditch was 10 fry/square meter while that for barrel was 20 fry/cubic meter. The fishes were fed with 3-test diets viz. low-cost formulated feed (rice bran 20%, wheat meal 10%, mustered [sic] oil cake 35%, poultry offal 35%), live foods (chopped snails and clams), and a commercial feed (Saudi-Bangla feed, starter 3: first month and grower-1: subsequent two months) and designated as T1, T2 and T3, respectively. Feeding rate was the same in all the treatments viz. 10% of body weight (first two months), 8% (third month) and 6% (fourth month). T1 and T2 had three replications while T3 had two replications. Water temperature was recorded weekly while fish growth was monitored monthly. After 4 months' rearing, H. fossilis and C. batrachus in ditches and barrels attained higher average weight in T2 followed by T3 and T1 while A. testudineus in barrels also attained higher average weight in T2. The variation in net weight gain by A. testudineus in ditch fed test diets T2 and T3 was not significantly different (P>0.05) though the net gain in both T2 and T3 was significantly (P<0.05) higher than that of T1. The yield of climbing perch as obtained from T1, T2 and T3 was 988, 1136 and 1185 kg/ha, respectively while that stinging catfish was 395, 242 and 444 kg/ha and walking catfish was 1605, 2,099 and 1,654 kg/ha respectively. All the three species showed significantly lower growth rate in barrels than in ditches.

A high temperature SOI CMOS NO2 sensor

For more than 20 years researchers have been interested in developing micro-gas sensors based on silicon technology. Most of the reported devices are based on micro-hotplates, however they use materials that are not CMOS compatible, and therefore are not suitable for large volume manufacturing. Furthermore, they do not allow the circuitry to be integrated on to the chip. CMOS compatible devices have been previously reported. However, these use polysilicon as the heater material, which has long term stability problems at high temperatures. Here we present low power, low cost SOI CMOS NO2 sensors, based on high stability single crystal silicon P+ micro-heaters platforms, capable of measuring gas concentrations down to 0.1 ppm. We have integrated a thin tungsten molybdenum oxide layer as a sensing material with a foundry-standard SOI CMOS micro-hotplate and tested this to NO2. We believe these devices have the potential for use as robust, very low power consumption, low cost gas sensors. © 2011 American Institute of Physics.

Wavelength-tuneable liquid crystal lasers from the visible to the near-infrared

The study of band-edge lasing from dye-doped chiral nematic liquid crystals has thus far been largely restricted to visible wavelengths. In this paper, a wide range of commercially available laser dyes are examined for their suitability as infrared emitters within a chiral nematic host. Problems such as poor solubility and reduced quantum efficiencies are overcome, and successful band-edge lasing is demonstrated within the range of 735-850 nm, using the dyes LD800, HITC-P and DOTC-P. This paper also reports on progress towards widely tuneable liquid crystal lasers, capable of emission in the region 460- 850 nm. Key to this is the use of common pump source, capable of simultaneously exciting all of the dyes (both infrared and visible) that are present within the system. Towards this aim, we successfully demonstrate near-infrared lasing (800 nm) facilitated by Förster energy transfer between the visible dye DCM, and the infra-red dye LD800, enabling pump wavelengths anywhere between 420 and 532 nm to be used. These results demonstrate that small and low-cost tuneable visible to near-infrared laser sources are achievable, using a single common pump source. Such devices are envisaged to have wide-ranging applications including medical imaging (including optical coherence tomography), point-of-care optical medical diagnostics (such as flow cytometry), telecommunications, and optical signatures for security coatings. © 2011 Copyright Society of Photo-Optical Instrumentation Engineers (SPIE).