Analysis of hybrid layer thickness, resin tag length and their correlation with microtensile bond strength using a total etch adhesive to intact dentin.

The objective of this study was to evaluate the use of a two-step total etch and rinse adhesive, the correlation between the hyybrid layer thickness (HL) and bond strength (BS), and between resin tag length (RT) and bond strength in the same teeth, and also to evaluate the fracture patterns of the tested specimens. Ten human molars were used for the restorative procedure and then sectioned in two halves (mesio-distally). The materials used were Adper Single Bond 2, 3M ESPE, Ultra etch gel, Ultradent and Filtek Z250, 3M ESPE. One half were utilized to measure the HL thickness and RT length through light microscopy analysis (400x), and the other half was subject to a microtensile test to measure the BS. The fractured surfaces were analyzed by scanning electron microscopy and fracture patterns classified. The Pearson correlation test was applied (p = 0.05). The results of the analyses of each specimen then were correlated: mean HL thickness = 4.39 (0.48) microm, mean length of RT = 9.94 (1.69) microm, mean BS = 23.98 (10.24) MPa. A statistically significant correlation between HL thickness and bond strength was found (r = 0.93). The two step etch and rinse adhesive system, showed a strong correlation between HL thickness and bond strength. The most common fractures were adhesive, followed by cohesive in resin.

Influence of the hybrid layer thickness and resin tag length on microtensile bond strength.

The purpose of this study was to evaluate the correlation between the hybrid layer thickness/resin tag length and the microtensile bond strength of conventional two-step adhesive system, when applied to healthy dentinal tissue. After performing the restorative adhesive procedures and tooth extractions, ten specimens were sectioned in the mesiodistal direction. One section was used for microscopic analysis of the resin tag lengths and the hybrid layer thickness, while the other was used for the microtensile bond strength test (0.5 mm/min). The fractured surface was classified according to the fracture pattern, under a stereoscopic microscope at 40x magnification. Data obtained were submitted to analysis using one-way ANOVA and Pearson's Correlation test (alpha=0.05). The means corresponding to the hybrid layer thickness, resin tag lengths and the microtensile test were 2.68 microm, 6.43 microm and 16.23 MPa, respectively. There was no correlation between the means of the values obtained for the microtensile test, and those presented by the hybrid layer (r2=0.40, p>0.05) and resin tags (r2=0.21, p>0.05). The microtensile bond strength of the conventional two-step adhesive system Adper Single Bond 2 did not depend on the thickness of the hybrid layer and length of resin tags.

Mare's folliculogenesis: Assessment of ovarian and perifollicular vascular perfusion by doppler ultrasound

Background: Ultrasound Doppler is a new technology that has recently been used in large animal reproduction. As the conventional ultrasound (B-mode) it is a noninvasive technique, but with the advantage of allows the assessment of the hemodynamic of reproductive tract in real time. The observation of important features of the vascularization and changes that occur during physiological processes that were not previously seen on B-mode encourage a reassessment of the concepts already established on the events of the reproductive physiology of animals and their applications. Review: In attempt to re-understand the equine reproductive physiology and finding practical uses to this new technique, authors showed that, during the follicular deviation, features are observed by Doppler before being observed under B-mode ultrasound like changes in the speed of the blood flow two days before deviation of the follicle size and one day before the increase in blood flow area of the follicular wall. According to another study ovulation is characterized by a decreased blood flow of the follicular wall in the last four hours preceding it, as well as the serration of the granulosa layer and formation of a non vascularized apex, but in our ongoing study, the ability to decrease the vascularity was not found. Very vascularized follicles are associated with higher rates of oocyte maturation and pregnant that does less vascularized follicles in the preovulatory phase. Those follicles that have septated evacuation (or prolonged) showed more vascularization and serration of the granulosa one hour before ovulation than follicles that ovulate normally, and this vascularization includes the apex of the follicle, the follicular wall portion that is not vascularized in normal ovulation. Another study reported that hemorrhagic follicles have better vascularization of the follicular wall on the days preceding ovulation than follicles destined to ovulate. Some authors also showed that anovulatory follicles grow in size at the same rate as ovulatory follicles, but the percentage of vascularization of its wall is much smaller at 35 mm. Another study characterized that the vascular wall of the follicle that results in the first ovulation of the year is much smaller on the day before ovulation than the number of vessels present in a follicle that will ovulate in the middle of the breeding season. In these cases, the use of Doppler ultrasound can help to prevent economic losses as insemination of mares in cycles that are not able of resulting in pregnancy. This review aims to gather the information found in the literature about the characteristics of follicular hemodynamic of mares taking into account moments of deviation in follicle size, ovulation, ovulation failure and follicular viability. Conclusion: The Doppler technology has the potential to provide important information about the follicular environment and thus be used in practice in search of the perfect equine reproductive management, achieving better utilization of genetic material and increasing the financial return. The use of this new tool opens a large area for several interesting studies that will contribute to the knowledge of the physiological events of the mare for that this technique can soon be effectively applied.

Identification of transmission line parameters from temporal measurements of currents and voltages in their terminals: Influence oh the length line

The objective of this paper is to show a methodology to estimate transmission line parameters. The method is applied in a single-phase transmission line using the method of least squares. In this method the longitudinal and transversal parameters of the line are obtained as a function of a set of measurements of currents and voltages (as well as their derivatives with respect to time) at the terminals of the line during the occurrence of a short-circuit phase-ground near the load. The method is based on the assumption that a transmission line can be represented by a single circuit π. The results show that the precision of the method depends on the length of the line, where it has a better performance for short lines and medium length. © 2012 IEEE.

Serum Metalloproteinases 2 and 9 as Predictors of Gait Status, Pressure Ulcer and Mortality after Hip Fracture

Introduction: The aim of this study is to evaluate the serum activity of metalloproteinases (MMPs) -2 and -9 as predictors of pressure ulcer (PU), gait status and mortality 6 months after hip fracture. Methods: Eighty-seven patients over the age of 65 admitted to the orthopedic unit from January to December 2010 with hip fracture were prospectively evaluated. Upon admission, patient demographic information, including age, gender and concomitant diseases, was recorded. Blood samples were taken for analysis of MMP -2 and -9 activity by gel zymography and for biochemical examination within the first 72 hours of the patient's admission, after clinical stabilization. The fracture pattern (neck, trochanteric or subtrochanteric), time from admission to surgery, surgery duration and length of hospital stay were also recorded. Results: Two patients were excluded due to the presence of pathological fractures (related to cancer), and three patients were excluded due to the presence of PU before admission. Eighty-two patients, with a mean age of 80.4 ± 7.3 years, were included in the analysis. Among these patients, 75.6% were female, 59.8% had PU, and 13.4% died 6 months after hip fracture. All patients underwent hip fracture repair. In a univariate analysis, there were no differences in serum MMP activity between hip fracture patients with or without PU. In addition, the multiple logistic regression analysis models, which were adjusted by age, gender, length of hospital stay and C-reactive protein, showed that the pro-MMP-9 complexed with neutrophil gelatinase-associated lipocalin form (130 kDa) was associated with gait status recovery 6 months after hip fracture. Conclusions: In conclusion, serum pro-MMP-9 is a predictor of gait status recovery 6 months after hip fracture. © 2013 Gumieiro et al.

Effect of different rest intervals, between sets, on muscle performance during leg press exercise, in trained older women

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Inbreeding depression on production and reproduction traits of buffaloes from Brazil

The objective of this study was to evaluate the influence of inbreeding depression on traits of buffaloes from Brazil. Specifically, the traits studied were body weight at 205 and 365 days of age, average daily gain from birth to 205 days (ADG_205), average daily gain between 205 and 365 days (ADG205_365) in Mediterranean buffaloes, and milk yield, lactation length, age of first calving and calving intervals in Murrah buffaloes. Inbreeding effects on the traits were determined by fitting four regression models (linear, quadratic, exponential and Michaelis-Menten) about the errors generated by the animal model. The linear model was only significant (P<0.05) for growth traits (exception of ADG205_365). The exponential and Michaelis-Menten models were significant (P<0.01) for all the studied traits while the quadratic model was not significant (P>0.05) for any of the traits. Weight at 205 and 365 days of age decreased 0.25kg and 0.39kg per 1% of increase in inbreeding, respectively. The inbred animals (F=0.25) produced less milk than non-inbred individuals: 50.4kg of milk. Moreover, calving interval increased 0.164 days per 1% of increase in inbreeding. Interestingly, inbreeding had a positive effect on age at first calving and lactation length, decreasing age of first calving and increasing lactation length. © 2012 Japanese Society of Animal Science.

A method for the geometric standardization of intraoral radiographs for long-term follow up of replanted teeth: A case report

The interpretation of the set of radiographs taken during the follow-up period after tooth replantation might pose several difficulties, especially the inability to adequately reproduce the projection geometry of the exposures. This article describes a method for the geometric standardization of intraoral radiographs using a custom-made apparatus comprising a film-holder attached to an occlusal splint for the long-term follow up of dentoalveolar trauma. The method was applied in a patient who suffered an avulsion of the maxillary central incisors and had the teeth replanted after 4 h in saline storage. Endodontic treatment started 7 days after the trauma with changes of a calcium hydroxide intracanal medication every 15 days in the first 2 months and thereafter at 30-day intervals for 8 months. Root canal filling was carried out after this period. The radiographic exposures taken at the follow-up visits were standardized to identify the possible alterations during the repair process, such as root resorptions. A maxillary arch impression was made with alginate, and the model was cast in stone for fabrication of an acetate occlusal splint. The custom-made apparatus used for standardization of the radiographic exposures was fabricated by fixing a Rinn X-C-P film-holder and a 5-mm-long piece of 0.7-mm orthodontic wire to the occlusal splint with autopolymerized acrylic resin. Radiographs were taken at 4-month intervals, starting 10 months after replantation up to 76 months. The images were digitized and analysed using the Digora system. The length of the central incisors was determined to verify the reproduction of the projection geometry of the exposures and the orthodontic wire served to assess accuracy during length estimations in the radiographs. The method described in this article for geometric standardization of intraoral radiographs provided a consistent reproduction of the geometric exposure parameters, being indicated for use in the radiographic follow up of cases of dentoalveolar trauma. © 2012 John Wiley & Sons A/S.

Relative growth and reproduction in Achelous spinicarpus (Crustacea: Portunidae) on the south-eastern continental shelf of Brazil

This investigation aimed to study the relative growth, morphological sexual maturity and fecundity of the swimming crab Achelous spinicarpus in a tropical region, on the south-eastern continental shelf of Brazil (25°S). Biometry of all specimens was conducted, including measurements of the cephalothorax, cheliped, abdomen and gonopods. Relative growth was described based on the equation for allometry (y = axb), and size at sexual maturity was determined from inflections in relations involving the cheliped, gonopods (males), and abdomen (females), as dependent variables, related to the cephalothorax width (independent variable). Fecundity was estimated by the gravimetric method. The relations of the length of the chelar propodus and carpal spine to the carapace width without the lateral spines (CW) showed positive allometry in both sexes, with a significant variation in the constant 'b' for males between the developmental stages (juvenile and adult) and the size at maturity estimated at 37 mm CW. In females, the abdomen was most appropriate for the estimate of morphological maturity, which occurred at a smaller size (32 mm CW), with a change in the growth pattern between the stages, passing from isometric (juveniles) to positive allometric (adults). The gonopods also showed different growth rates between developmental stages, in synchrony with the variables of the cheliped. Mean fecundity for the species was 53,984 eggs, with a positive correlation between the number of eggs exteriorized and the size of the female; the equations allowed interconversion between these variables, due to the adjustment of the power function (r2 ≥ 86%). © 2012 Marine Biological Association of the United Kingdom.

Capital flows to Latin America: first quarter 2003

Includes bibliography

Frequência alimentar e níveis de proteína no desempenho e na primeira maturação sexual em Rhamdia quelen criados em tanque-rede

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Biologia reprodutiva e dinâmica populacional de Hypancistrus zebra Isbrücker & Nijssen, 1991 (Siluriformes, Loricariidae), no rio Xingu, Amazônia brasileira

Hypancistrus zebra é uma espécie ornamental, endêmica e rara da região do Médio – Baixo Rio Xingu, a qual apresenta forte demanda do mercado de peixes ornamentais internacional, que criou uma forte pressão de exploração associada a esta espécie. Atualmente, H.zebra encontra-se na lista brasileira de fauna ameaçada de extinção e sua captura está proibida. Sabe-se que mesmo proibida, a mesma continua sendo capturada e exportada ilegalmente, aliada a isso a construção da Hidrelétrica de Belo Monte em seu trecho de distribuição, que ameaça a sua área de distribuição geográfica e a falta de informações sobre sua biologia e ecologia dificultam ações de ordenamento para esta espécie. De modo que, se objetivou neste trabalho estudar aspectos da biologia reprodutiva e dinâmica populacional para contribuir com medidas de conservação para esta espécie. Exemplares de H. zebra foram capturados mensalmente de março de 2009 a fevereiro de 2010, através de mergulho com compressor, no Rio Xingu, entre a localidade de Gorgulho da Rita e a Vila de Belo Monte. Os indivíduos capturados foram pesados e medidos (peso e comprimento total). As gônadas foram retiradas e imediatamente fixadas em Solução Bouin. Seguiram-se as técnicas histológicas de rotina. Os estágios de maturação gonadal foram descritos com base na presença de células germinativas em diferentes estádios de desenvolvimento. Através dos dados de freqüência dos comprimentos foram feitas estimativas dos parâmetros populacionais tais como: modelos de crescimento, recrutamento, mortalidade, rendimento por recruta e tamanho de primeira maturidade gonadal. A espécie apresentou uma desova sazonal com dois picos entre as estações de transição entre seca e cheia (e vice-versa) do rio, e dois períodos de recrutamento, com taxas de crescimento diferenciadas. Estimou-se que a espécie possui uma longevidade de cinco anos, e que está no limite do rendimento máximo sustentável, o que se caracteriza como uma situação perigosa para a espécie, pois qualquer aumento do esforço irá comprometer o estoque e ainda não se sabe que impactos ocorrerão em decorrência das modificações provocadas em seu habitat pela construção da hidrelétrica.

Ecologia, pesca e dinâmica populacional do camarão-da-Amazônia - Macrobrachium amazonicum (Heller, 1862) (Decapoda:Palaemonidae) – capturado na região das ilhas de Belém - Pará - Brasil

A partir de coletas biológicas mensais na Baía do Guajará e Ilha do Mosqueiro, foram obtidas amostragens de Macrobrachium amazonicum para estudos de reprodução, densidade, relações morfométricas e dinâmica de populações. Adicionalmente, dois outros desenhos amostrais foram utilizados para estudo da capturabilidade da espécie sobre influência de dois tipos de iscas e três tamanhos de armadilhas e de sua distribuição espacial em dois canais perenes do mesmo estuário. Os resultados apontam para diferença na captura de M. amazonicum quando se utiliza isca de farelo de babaçu, porém a diferença é unicamente na abundância sendo que a estrutura populacional não é modificada. A espécie é mais abundante no período seco, corroborando a idéia de maior capturabilidade dos recursos pesqueiros. A ilha do Combu é o local onde os espécimes são mais encontrados e ainda com maiores tamanhos. As fêmeas são significativamente maiores e mais pesadas que os machos, denotando a diferenciação no metabolismo devido à reprodução. A proporção de machos é maior nas menores classes de comprimento, o que pode indicar um aumento na predação de machos de menores tamanhos devido ao seu comportamento mais agressivo que o das fêmeas ou simplesmente por que os machos que atingem comprimentos maiores que as fêmeas sejam mais intensamente predados pela pesca, havendo o recrutamento apenas dos machos menores. O tamanho de primeira maturação (comprimento da carapaça) para ambos os sexos resultou em 11,5mm (11,5 mm nos machos e 11,2mm nas fêmeas). A reprodução em M. amazonicum é do tipo contínua ou periódica com um aumento gradativo entre os meses de outubro a março. Os locais mais abrigados, como regiões mais internas de canais de maré ou furos (comuns no estuário amazônico) são locais preferencialmente procurados por fêmeas maduras para a desova e crescimento dos juvenis. Os parâmetros de crescimento da curva de von Bertalanffy obtidos, foram bastante similares entre os sexos, sendo L∞ = 44,8mm e K = 0,35 para os machos e L∞ = 46,5 e K = 0,31 para as fêmeas. As taxas de mortalidade e explotação obtidas apontam para um estado limítrofe de explotação do recurso, neste sentido, o manejo deverá ser tratado com bastante cuidado. A taxa atual de explotação encontra-se no seu limite máximo de sustentabilidade. Nesta situação, qualquer aumento do esforço poderá ocasionar um estado de sobre-explotação de crescimento. Aliado ao estado de quase comprometimento dos estoques de M. amazonicum, a situação sócio econômica dos pescadores também não é diferente dos demais sistemas pesqueiros do litoral do Pará: baixa escolaridade, atuação deficiente das entidades de classe, cadeia produtiva complexa e que desprivilegia os seus principais atores. Sugere-se o monitoramento estatístico da produção; a delimitação do tamanho mínimo de captura em 4,5cm de comprimeto total; a proibição da pesca com matapis em áreas de cabeceira de furos e canais de maré; um censo de usuários e a utilização de modelos bioeconômicos que contemplem os principais aspectos de sua cadeia biológica e produtiva.

Integral transform method for laminar heat transfer convection of herschel-bulkley fluids within concentric annular ducts

ABSTRACT: Related momentum and energy equations describing the heat and fluid flow of Herschel-Bulkley fluids within concentric annular ducts are analytically solved using the classical integral transform technique, which permits accurate determination of parameters of practical interest in engineering such as friction factors and Nusselt numbers for the duct length. In analyzing the problem, thermally developing flow is assumed and the duct walls are subjected to boundary conditions of first kind. Results are computed for the velocity and temperature fields as well as for the parameters cited above with different power-law indices, yield numbers and aspect ratios. Comparisons are also made with previous work available in the literature, providing direct validation of the results and showing that they are consistent.

Pesca, alimentação, reprodução e crescimento do Amuré, Gobioides broussonnetii Lacepède, 1800 (Pisces : Gobiidae) no Estuário Amazônico, município de Vigia - Pará

Gobioides broussonnetii é o maior membro da família Gobiidae, e está distribuído no Atlântico Ocidental dos Estados Unidos até o Rio Grande do Sul. É abundante na foz do Rio Amazonas onde habita as águas salobras dos manguezais. Além de ser um importante elo na cadeia trófica do estuário amazônico, é um recurso pesqueiro explorado por pescadores artesanais. Estudaram-se aspectos da pesca, alimentação, reprodução e crescimento de Gobioides broussonnetii na baía de Marajó, município de Vigia, Pará, Brasil, entre setembro de 2003 e agosto de 2004. Exemplares para estudo foram adquiridos de pescadores locais e informações sobre a pesca foram obtidas através da observação de campo e entrevistas com os pescadores. No estudo da alimentação foi analisada a composição dos itens alimentares encontrados nos estômagos. A análise reprodutiva abordou aspectos do período reprodutivo e tamanho da 1a maturação gonadal. Foram estimados os parâmetros de crescimento utilizando o método indireto baseados nas análises das medidas de comprimento total de 1155 exemplares. G. broussonnetii é conhecida como amurés no estuário amazônico e é capturada no fundo lodoso em águas rasas sendo utilizada como isca na pesca comercial. De maneira geral é uma espécie fitófaga. Análises de conteúdo estomacal revelaram que algas da espécie Coscinodiscus concinus são alimentos mais consumidos. Há maior conteúdo estomacal durante a estação seca (julho a dezembro). O período entre janeiro e junho corresponde a época de atividade reprodutiva para essa espécie na área de estudo. O comprimento médio da primeira maturação gonadal foi de 23,9 cm. A razão sexual observada foi de 1:1. Os resultados obtidos neste estudo indicam que G. Broussonnetii usa o estuário amazônico como local de alimentação e reprodução. A análise macroscópica das gônadas indicou uma época de reprodução durante o inverno (janeiro a junho), com apenas um período de desova por ano entre fevereiro e abril. Foram encontrados nove grupos etários de G. btoussonnetii no estuário amazônico. Estimaram-se os valores de L∞ = 67,36 ( K=0,205 ano^-1, Ø = 3,014). A relação peso-comprimento apresentou diferenças significativas entre machos e fêmeas, com as fêmeas que pesam mais que os machos.