Using a semiconductor optical amplifier integrated with a pump laser for mid-span spectral inversion and wavelength conversion

A semiconductor optical amplifier monolithically integrated with a distributed feedback pump laser is used for non-degenerate four wave mixing applications. Experimental results are presented which illustrate the use of this compact device for both wavelength conversion and dispersion compensation applications at high data rates.

A fully integrated 660 MHz low-swing energy-recycling DC-DC converter

A fully integrated 0.18 μm DC-DC buck converter using a low-swing "stacked driver" configuration is reported in this paper. A high switching frequency of 660 MHz reduces filter components to fit on chip, but this suffers from high switching losses. These losses are reduced using: 1) low-swing drivers; 2) supply stacking; and 3) introducing a charge transfer path to deliver excess charge from the positive metal-oxide semiconductor drive chain to the load, thereby recycling the charge. The working prototype circuit converts 2.2 to 0.75-1.0 V at 40-55 mA. Design and simulation of an improved circuit is also included that further improves the efficiency by enhancing the charge recycling path, providing automated zero voltage switching (ZVS) operation, and synchronizing the half-swing gating signals. © 2009 IEEE.

High speed electro-thermal models for inverter simulations

This paper presents the application of advanced compact models of the IGBT and PIN diode to the full electrothermal system simulation of a hybrid electric vehicle converter using a look-up table of device losses. The Fourier-based solution model is used, which takes account of features such as local lifetime control and field-stop technology. Device and circuit parameters are extracted from experimental waveforms and device structural data. Matching of the switching waveforms and the resulting generation of the look-up table is presented. An example of the use of the look-up tables in simulation of inverter device temperatures is also given, for a hypothetical electric vehicle subjected to an urban driving cycle. © 2006 IEEE.

Losses in self-oscillating ballasts for electrode-type compact fluorescent lamps

Commercially available integrated compact fluorescent lamps (CFLs) use self-resonant ballasts on grounds of simplicity and cost. To understand how to improve ballast efficiency, it is necessary to quantify the losses. The losses occurring in these ballasts have been directly measured using a precision mini-calorimeter. In addition, a Pspice model has been used to simulate the performance of an 18 W integrated CFL. The lamp has been represented by a behavioural model and Jiles-Atherton equations were used to model the current transformer core. The total loss is in close agreement with measurements from the mini-calorimeter, confirming the accuracy of the model. The total loss was then disaggregated into component losses by simulation, showing that the output inductor is the primary source of loss, followed by the inverter switches. © 2011 The Institution of Engineering and Technology.

Population dynamics of a cladoceran zooplankter, Daphnia magna, in two poultry-cum-fish (duck-fish and chicken-fish) integrated ponds

The population dynamics of Daphnia magna was studied in two integrated fish-cum-poultry ponds (duck-fish and chicken-fish). The seasonal changes in the population of D. magna were recorded. Peak population of the zooplankter was recorded in the month of January in both ponds. The birth rate (b), growth rate (r) and death rate {d) of D. magna were studied in field as well as in the laboratory. Three temperatures and three different food concentrations were selected for laboratory study. The maximum values of (b) and (r) were recorded during December-January in field. Under laboratory conditions, highest birth and death rate occurred at lowest temperature (15 °C). Both food and temperature were found to affect the population dynamics of the species; longest life span and maximum population were recorded at lowest temperature and maximum food concentration.

Measurement-Integrated simulations and Kalman filter applied to a co-flowing jet

This paper deals with the experimental evaluation of a flow analysis system based on the integration between an under-resolved Navier-Stokes simulation and experimental measurements with the mechanism of feedback (referred to as Measurement-Integrated simulation), applied to the case of a planar turbulent co-flowing jet. The experiments are performed with inner-to-outer-jet velocity ratio around 2 and the Reynolds number based on the inner-jet heights about 10000. The measurement system is a high-speed PIV, which provides time-resolved data of the flow-field, on a field of view which extends to 20 jet heights downstream the jet outlet. The experimental data can thus be used both for providing the feedback data for the simulations and for validation of the MI-simulations over a wide region. The effect of reduced data-rate and spatial extent of the feedback (i.e. measurements are not available at each simulation time-step or discretization point) was investigated. At first simulations were run with full information in order to obtain an upper limit of the MI-simulations performance. The results show the potential of this methodology of reproducing first and second order statistics of the turbulent flow with good accuracy. Then, to deal with the reduced data different feedback strategies were tested. It was found that for small data-rate reduction the results are basically equivalent to the case of full-information feedback but as the feedback data-rate is reduced further the error increases and tend to be localized in regions of high turbulent activity. Moreover, it is found that the spatial distribution of the error looks qualitatively different for different feedback strategies. Feedback gain distributions calculated by optimal control theory are presented and proposed as a mean to make it possible to perform MI-simulations based on localized measurements only. So far, we have not been able to low error between measurements and simulations by using these gain distributions.

Integrated billing mechanisms in the Internet of Things to support information sharing and enable new business opportunities

The Internet of Things (IOT) concept and enabling technologies such as RFID offer the prospect of linking the real world of physical objects with the virtual world of information technology to improve visibility and traceability information within supply chains and across the entire lifecycles of products, as well as enabling more intuitive interactions and greater automation possibilities. There is a huge potential for savings through process optimization and profit generation within the IOT, but the sharing of financial benefits across companies remains an unsolved issue. Existing approaches towards sharing of costs and benefits have failed to scale so far. The integration of payment solutions into the IOT architecture could solve this problem. We have reviewed different possible levels of integration. Multiple payment solutions have been researched. Finally we have developed a model that meets the requirements of the IOT in relation to openness and scalability. It supports both hardware-centric and software-centric approaches to integration of payment solutions with the IOT. Different requirements concerning payment solutions within the IOT have been defined and considered in the proposed model. Possible solution providers include telcos, e-payment service providers and new players such as banks and standardization bodies. The proposed model of integrating the Internet of Things with payment solutions will lower the barrier to invoicing for the more granular visibility information generated using the IOT. Thus, it has the potential to enable recovery of the necessary investments in IOT infrastructure and accelerate adoption of the IOT, especially for projects that are only viable when multiple benefits throughout the supply chain need to be accumulated in order to achieve a Return on Investment (ROI). In a long-term perspective, it may enable IT-departments to become profit centres instead of cost centres. © 2010 - IOS Press and the authors. All rights reserved.

Integrated cage-cum-pond culture systems with high valued climbing perch (Anabas testudineus) in cages and low-valued carps in open ponds

An on-farm trial was conducted over 150 days to determine appropriate stocking ratio, growth and production of climbing perch (Anabas testudineus) in cages and carps in open water of ponds in eighteen farmers' ponds from Haluaghat Upazila at Mymensingh district of Bangladesh. One or two 1 m super(3) cage was suspended in each of 12 earthen ponds and other 6 ponds served as control without cages. Climbing perch of 2-3 g in size were stocked in cages while fingerlings of silver carp (Hypophthalmicthys molitrix), catla (Catla catla), rohu (Labeo rohita), mirgal (Cirhinus cirrhosus), rajputi (Puntius sarana) and common carp (Cyprinus carpio) were stocked at 1 fish/m super(2) with a species ratio of 5:4:4:4:2:1 in open water of all ponds to give cage to open-pond fish ratios of 1:1 (T sub(1:1)) and 2:1 (T sub(2:1)) and 0:1 (T sub(0:1)) as three treatments with six replicates each. Survival of climbing perch was higher in T sub(1:1) (61.67%) than that of T sub(2:1) (29.5%) and was significantly different (p>0.05) between the treatments. Stocking of small size climbing perch fry increased the mortality rate in cages. The net yields of Thai koi were 0.13±0.01 (t/ha) and 0.10±0.01 (t/ha) in treatments T sub(1:1) and T sub(2:1), respectively and both were significantly different (p>0.05). Survival of-open-pond carps was high, ranging from 50 to 91.67% with significantly lower in T sub(0:1) than that of T sub(1:1) and T sub(2:1) treatment. Net and gross yield of each carp species were significantly higher in the T sub(1:1) and T sub(2:1) treatment than that in T sub(0:1) treatment. Net revenues were positive but low in all treatments. Therefore, bigger size climbing perch with lower stocking ratio (T sub(1:1)) is suitable for integrated cage-pond culture of climbing perch and carps. However, more on-farm trials in different ecosystem with scientific interventions are necessary to develop the technology for further dissemination among the rural farmers.

Fisheries, marine environment, and integrated coastal management policy processes, content and implementation in the BOBLME countries: regional synthesis and country questionnaires

This paper examines policy processes, policy trends and policy implementation with regards to capture fisheries, the marine environment and Integrated Coastal Management (ICM) in BOBLME countries. Individual country information was analyzed to generate a regional synthesis.

Report of the postgraduate certificate course on integrated coastal management, Bangkok, Thailand, 21 January - 1 March, 2013

Student projects included: conservation and protection of critical coral habitats in Phuket; assessing the carrying capacity on conservation and protection strategies; proactive stakeholder strategy to tackle an environmental threat; improving the environmental management through participation and sustainable freshwater management. All of these projects were conducted on Racha Yai Island in Phuket.

Towards the development of an integrated design framework using the Blackboard model

Current research into the process of engineering design is extending the use of computers towards the acquisition, representation and application of design process knowledge in addition to the existing storage and manipulation of product-based models of design objects. This is a difficult task because the design of mechanical systems is a complex, often unpredictable process involving ill-structured problem solving skills and large amounts of knowledge, some which may be of an incomplete and subjective nature. Design problems require the integration of a variety of modes of working such as numerical, graphical, algorithmic or heuristic and demand products through synthesis, analysis and evaluation activities.

This report presents the results of a feasibility study into the blackboard approach and discusses the development of an initial prototype system that will enable an alphanumeric design dialogue between a designer and an expert to be analysed in a formal way, thus providing real-life protocol data on which to base the blackboard message structures.

Report of the training course on integrated coastal management in the Bay of Bengal, Chonburi, Thailand, 20-24 October, 2014

Participants consisted of 25 middle and junior level personnel from BOBLME countries. Modules included: Integrated Coastal Management (ICM) concept and principles; ICM development and implementation; indicators of good practice; and action planning.