The Valuation of Agricultural Land and the Influence of Government Payments. Factor Markets Working Paper No. 10, December 2011

This study gives an overview of the theoretical foundations, empirical procedures and derived results of the literature identifying determinants of land prices. Special attention is given to the effects of different government support policies on land prices. Since almost all empirical studies on the determination of land prices refer either to the net present value method or the hedonic pricing approach as a theoretical basis, a short review of these models is provided. While the two approaches have different theoretical bases, their empirical implementation converges. Empirical studies use a broad range of variables to explain land values and we systematise those into six categories. In order to investigate the influence of different measures of government support on land prices, a meta-regression analysis is carried out. Our results reveal a significantly higher rate of capitalisation for decoupled direct payments and a significantly lower rate of capitalisation for agri-environmental payments, as compared to the rest of government support. Furthermore, the results show that taking theoretically consistent land rents (returns to land) and including non-agricultural variables like urban pressure in the regression implies lower elasticities of capitalisation. In addition, we find a significant influence of the land type, the data type and estimation techniques on the capitalisation rate.

Heat flow measurements in sediments of the Norwegian Sea (Table 1)

During cruises in the Norwegian Sea in 1969 and 1972 seven heat flow values were measured between Iceland and the Voring Plateau. The six eastern values of this profile show a positive trend east-southeastwards which coincides with a possible transition from oceanic to continental crust suggested by seismic results. One heat flow value taken near Iceland and 250 miles west of the others reflects the influence of the Mid-Atlantic Ridge. An estimation of the heat flow at a depth of 15 km below the measuring localities yields values with a small, possibly insignificant negative trend towards the east-southeast. The temperatures at 15 km depth are estimated to be 190 °C beneath the zone of seamounts and 280 °C beneath the Voring Plateau.

Atlantic 231Pa/230Th and biogenic opal compilation of the Holocene and the LGM

The strength and geometry of the Atlantic meridional overturning circulation is tightly coupled to climate on glacial-interglacial and millennial timescales, but has proved difficult to reconstruct, particularly for the Last Glacial Maximum. Today, the return flow from the northern North Atlantic to lower latitudes associated with the Atlantic meridional overturning circulation reaches down to approximately 4,000 m. In contrast, during the Last Glacial Maximum this return flow is thought to have occurred primarily at shallower depths. Measurements of sedimentary 231Pa/230Th have been used to reconstruct the strength of circulation in the North Atlantic Ocean, but the effects of biogenic silica on 231Pa/230Th-based estimates remain controversial. Here we use measurements of 231Pa/230Th ratios and biogenic silica in Holocene-aged Atlantic sediments and simulations with a two-dimensional scavenging model to demonstrate that the geometry and strength of the Atlantic meridional overturning circulation are the primary controls of 231Pa/230Th ratios in modern Atlantic sediments. For the glacial maximum, a simulation of Atlantic overturning with a shallow, but vigorous circulation and bulk water transport at around 2,000 m depth best matched observed glacial Atlantic 231Pa/230Th values. We estimate that the transport of intermediate water during the Last Glacial Maximum was at least as strong as deep water transport today.

Temperature dependence of the thrombin-catalyzed proteolysis of prothrombin

Measurement of the temperature-dependence of thrombin-catalyzed cleavage of the Arg(155)-Ser(156) and Arg(284)-Thr(285) peptide bonds in prothrombin and prothrombin-derived substrates has yielded Arrhenius parameters that are far too large for classical mechanistic interpretation in terms of a simple hydrolytic reaction. Such a difference from the kinetic behavior exhibited in trypsin- and chymotrypsin-catalyzed proteolysis of peptide bonds is attributed to contributions by enzyme exosite interactions as well as enzyme conformational equilibria to the magnitudes of the experimentally determined Arrhenius parameters. Although the pre-exponential factor and the energy of activation deduced from the temperature-dependence of rate constants for proteolysis by thrombin cannot be accorded the usual mechanistic significance, their evaluation serves a valuable role by highlighting the existence of contributions other than those emanating from simple peptide hydrolysis to the kinetics of proteolysis by thrombin and presumably other enzymes of the blood coagulation system. (C) 2004 Elsevier B.V. All rights reserved.

An assessment of the performance of high density polyethylene copolymers for natural gas distribution pipes

The total thermoplastics pipe market in west Europe is estimated at 900,000 metric tonnes for 1977 and is projected to grow to some 1.3 million tonnes of predominantly PVC and polyolefins pipe by 1985. By that time, polyethylene for gas distribution pipe and fittings will represent some 30% of the total polyethylene pipe market. The performance characteristics of a high density polyethylene are significantly influenced by both molecular weight and type of comonomer; the major influences being in the long-term hoop stress resistance and the environmental stress cracking resistance. Minor amounts of hexene-1 are more effective than comonomers lower in the homologous series, although there is some sacrifice of density related properties. A synergistic improvement is obtained by combining molecular weight increase with copolymerisation. The Long-term design strength of polyethylene copolymers can be determined from hoop stress measurement at elevated temperatures and by means of a separation factor of approximate value 22, extrapolation can be made to room temperature performance for a water environment. A polyethylene of black composition has a sufficiently improved performance over yellow pigmented pipe to cast doubts on the validity of internationally specifying yellow coded pipe for gas distribution service. The chemical environment (condensate formation) that can exist in natural gas distribution networks has a deleterious effect on the pipe performance the reduction amounting to at least two decades in log time. Desorption of such condensate is very slow and the influence of the more aggressive aromatic components is to lead to premature stress cracking. For natural gas distribution purposes, the design stress rating should be 39 Kg/cm2 for polyethylenes in the molecular weight range of 150 - 200,000 and 55 Kg/cm2 for higher molecular weight materials.

Getting marketing back in the boardroom:understanding the drivers of marketing's influence within the firm

As many strategically important aspects of marketing are addressed by other functions in the organization, the decreased influence of the marketing department within companies is a topic of growing debate. In this study, the authors investigate this diminished influence and assess its determinants and consequences. They interviewed 25 marketing and finance executives from leading Dutch firms. They also conducted a large-scale Internet-based survey of several hundred marketing, finance, and general managers. Their results show that accountability and the innovativeness of the marketing department are the major drivers of the marketing department’s influence. They also demonstrate that a firm’s short-term orientation is negatively related to the influence of the marketing department. Marketing influence is positively related to market orientation, which is positively related to firm performance. Their results do not support prior findings of a direct positive link between marketing influence and firm performance, which might suggest that there is no need for a strong marketing department. The study suggests that an influential marketing department is relevant primarily when the firm is not market oriented. When firms are market oriented, a less influential marketing department does not lower their performance. Hence, it appears that they can choose to have an influential or noninfluential marketing department without any repercussions for their performance. Marketing activities could move to other functions. The authors suggest that marketing departments should aim to retain their influence. Dispersing marketing decision making among many functions can cause a lack of coordination; customers also lose their advocate within the firm. How can marketing departments regain their influence? The authors suggest two general solutions. First, marketing departments should become more accountable by linking marketing actions and policies with financial results. Marketers should become capable in analytics and finance. Second, they should become more innovative by increasing their share in new product or service concepts. They can do so by using their knowledge of the market and customers to contribute to new product or service development.

The influence of memory in a threshold model for distributed task assignment

A nature inspired decentralised multi-agent algorithm is proposed to solve a problem of distributed task selection in which cities produce and store batches of different mail types. Agents must collect and process the mail batches, without a priori knowledge of the available mail at the cities or inter-agent communication. In order to process a different mail type than the previous one, agents must undergo a change-over during which it remains inactive. We propose a threshold based algorithm in order to maximise the overall efficiency (the average amount of mail collected). We show that memory, i.e. the possibility for agents to develop preferences for certain cities, not only leads to emergent cooperation between agents, but also to a significant increase in efficiency (above the theoretical upper limit for any memoryless algorithm), and we systematically investigate the influence of the various model parameters. Finally, we demonstrate the flexibility of the algorithm to changes in circumstances, and its excellent scalability.

Metallocene ethylene-1-octene copolymers:influence of comonomer content on thermo-mechanical, rheological, and thermo-oxidative behaviours before and after melt processing in an internal mixer

The influence of the comonomer content in a series of metallocene-based ethylene-1-octene copolymers (m-LLDPE) on thermo-mechanical, rheological, and thermo-oxidative behaviours during melt processing were examined using a range of characterisation techniques. The amount of branching was calculated from 13C NMR and studies using differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) were employed to determine the effect of short chain branching (SCB, comonomer content) on thermal and mechanical characteristics of the polymer. The effect of melt processing at different temperatures on the thermo-oxidative behaviour of the polymers was investigated by examining the changes in rheological properties, using both melt flow and capillary rheometry, and the evolution of oxidation products during processing using infrared spectroscopy. The results show that the comonomer content and catalyst type greatly affect thermal, mechanical and oxidative behaviour of the polymers. For the metallocene polymer series, it was shown from both DSC and DMA that (i) crystallinity and melting temperatures decreased linearly with comonomer content, (ii) the intensity of the ß-transition increased, and (iii) the position of the tan δmax peak corresponding to the a-transition shifted to lower temperatures, with higher comonomer content. In contrast, a corresponding Ziegler polymer containing the same level of SCB as in one of the m-LLDPE polymers, showed different characteristics due to its more heterogeneous nature: higher elongational viscosity, and a double melting peak with broader intensity that occurred at higher temperature (from DSC endotherm) indicating a much broader short chain branch distribution. The thermo-oxidative behaviour of the polymers after melt processing was similarly influenced by the comonomer content. Rheological characteristics and changes in concentrations of carbonyl and the different unsaturated groups, particularly vinyl, vinylidene and trans-vinylene, during processing of m-LLDPE polymers, showed that polymers with lower levels of SCB gave rise to predominantly crosslinking reactions at all processing temperatures. By contrast, chain scission reactions at higher processing temperatures became more favoured in the higher comonomer-containing polymers. Compared to its metallocene analogue, the Ziegler polymer showed a much higher degree of crosslinking at all temperatures because of the high levels of vinyl unsaturation initially present.

The influence of surface functionalization of activated carbon on palladium dispersion and catalytic activity in hydrogen oxidation

Stone-fruit activated carbon (SAC) and modified versions containing acidic oxygen and basic nitrogen groups have been used to prepare palladium catalysts by wet impregnation. Carbon supports and catalysts are investigated by thermo-gravimetric analysis, TPD, oxygen chemisorption, TEM and XPS. The influence of the nature of the functional groups on the dispersion and oxidation state of palladium and its activity in hydrogen oxidation is investigated. Pd dispersion is found to increase with the basic strength of functional groups on the support. XPS reveals that introduction of amine groups in SAC results in an increased proportion of Pd0, resistant to re-oxidation. Palladium catalysts supported on activated carbon modified by diethylamine groups are found to exhibit the highest metal dispersion and greatest activity in hydrogen oxidation. © 2007 Elsevier B.V. All rights reserved.

Research of the Influence of Methods of Compression on the Co-efficient of Information Security of Objects Under Attacks

In this paper a possibility for quantitative measuring of information security of objects, exposed to information attacks and processed with methods of compression, is represented. A co-efficient of information security, which reflects the influence of the level of compression obtained after applying methods of compression to objects and the time, required by the attack to get access to the corresponding object, is proposed. Methods’ groups with the highest and respectively the lowest values of the co-efficient of information security for all methods’ groups in relation to all attacks’ groups are determined. Assessments and conclusions for future investigations are proposed.

The influence of culture and market orientation on services brands:insights from Irish banking and retail firms

Purpose: This paper aims to examine the influence of the culture of the service firm on its interpretation of the role of the brand and on the development and implementation of its brand values. Design/methodology/approach: A grounded theory approach was used. Interviews were conducted with 20 managers within two leading banking firms in Ireland and two leading grocery retailers in Ireland. Findings: The development of the brand, and its role within the firm, is closely related to the firm's culture. The research shows obstacles and opportunities created by the cultural context of firms wishing to disseminate and embed a set of brand values. The paper presents an "involvement model" of brand values implementation and outlines changes required to implement brand values. Research limitations/implications: The study was bound by access to firms, and managers' availability. The authors sought an insight into the relationship between each firm's culture and its brands. They advocate quantitative research to further investigate the findings within these service sectors and to test proposed antecedents (transformational leadership, employee involvement) and outcomes (employee-based brand equity and consumer-based brand equity) of values adoption. Practical implications: The paper identifies aspects of retail and banking cultures which support or detract from brand development. In particular, it presents the learnings from successful brand values implementation in a clan culture, aspects of which are applicable across other cultures. Originality/value: The paper provides valuable insights into the role of the brand within the service firm and the positive and negative influence of context on brand values and their development and implementation. © Emerald Group Publishing Limited.

Assessing the influence of organizational personality, applicants' need motivation, expectancy beliefs, and person-organization fit on applicant attraction

This research explored the thesis that organizational personality is related to applicants’ attraction to an organization through a process which involves need motivation, expectancy beliefs, and applicants’ perceptions of person-organization fit. Organizational personality may be defined as a collection of trait-like characteristics that individuals use to describe organizational practices, policies, values, and culture. Specifically, this research investigated the hypothesis that organizational personality information is useful to applicants because it helps individuals to determine their perceptions of fit. A sample of students (N = 198) and working adults (N = 198) participated in an online experiment. Findings indicated that individuals’ beliefs about the instrumentality of desirable work related outcomes are essential to determining their perceptions of fit and organizational attraction. Additionally, organizational personality perceptions interacted with need motivation to affect perceptions of fit and organizational attraction. For instance, perceptions of fit mediated the influence of the interaction between need for achievement and perceptions of innovativeness on organizational attraction. The interaction of need motivation and perceptions of organizational personality helped individuals to better determine their perceptions of fit and subsequent attraction toward organizations.^

The influence of mandibular ridge anatomy on treatment outcome with conventional complete denture.

Visto que indicadores de prognóstico são uma ferramenta importante para a seleção de pacientes a serem tratados com prótese total, este estudo investigou a influência da forma e da resiliência do rebordo alveolar mandibular sobre a retenção e estabilidade de próteses totais convencionais. Noventa e três pacientes desdentados portadores de próteses totais superior e inferior compuseram a amostra. Os dados foram coletados quanto a forma e resiliência do rebordo mandibular. As próteses foram avaliadas para a retenção e estabilidade utilizando-se uma ferramenta objetiva e reproduzível. As associações entre as características clínicas do rebordo alveolar mandibular e retenção e estabilidade das próteses foram analisados por meio dos testes qui-quadrado e exato de Fisher (α = 0.05). Observou-se associação significativa entre a forma do rebordo e a estabilidade da prótese (p <0,05), enquanto que a resiliência foi associada significativamente com a retenção (p <0,001). Baseando-se nos resultados, a resiliência e forma do rebordo mandibular influenciaram, respectivamente, a retenção e estabilidade de próteses totais convencionais.

The influence of a peer mentor program for international students on domestic peer mentors and their intercultural development

In this study, a mixed method approach was used to examine the experience of 43 domestic peer mentors who participated in a peer mentoring program for international students offered at Memorial University of Newfoundland, St. John’s, Canada. The study aimed to answer the following questions: 1) does participating in a mentorship program for international students result in change in the intercultural development for domestic peer mentors as measured by the Intercultural Development Inventory (IDI)? 2) what were the experiences of domestic peer mentors participating in a peer mentoring program for international students? Following the Developmental Model of Intercultural Sensitivity (Bennett, 1998) as a guide, this study used the scores from the Intercultural Development Inventory (IDI) to gain an understanding of the influence of the program. The scores obtained pre and post mentorship experiences were compared and a significant difference was found. Reflections from 120 monthly reports and seven individual semi-structured interviews were also conducted to gain a deeper understanding of the mentorship experience and the influence it had on the mentors’ intercultural development. The benefits of intercultural peer mentoring on student development of skills such as leadership, communication and empathy are also discussed. The study echoes previous research that calls for an increased amount of facilitated intercultural program within university campuses. The study also advocates for further implementation of programs that provide opportunities for intercultural learning between domestic and international students in order for intercultural development to improve in higher educational settings.

Effect of the processing conditions on the microstructure and properties of rotational molded polyamide 11

Rotomolded containers for solvents and hydrocarbons require the use of high-permeability resins such as polyamide (PA). The published studies with this material are very scarce. In this work, a commercial grade of PA11 was rotational-molded using different processing temperatures and characterized with a range of techniques. The study aims at investigating the influence of the processing conditions on the microstructure and properties of molded parts. The results showed that the spherulitic morphology and the mechanical properties are affected by the processing temperature, the optimum processing range being between 220°C and 240°C. Overheating causes a decrease of the impact strength and a severe increase in the formation of pinholes at the outer surface due to polymer degradation and formation of volatile products. The thermo-oxidation reactions occurring at the inner surface of the samples result in the formation of products that absorb in the UV and visible light regions and cause the microhardness and the melt viscosity of the material to increase. The extent and severity of the degradation at the inner surface may be easily assessed by fluorescence microscopy. © 2008 Wiley Periodicals, Inc.