Evaluation of damping properties of structural glass panes under impact loading

The latest technology and architectural trends have significantly improved the use of a large variety of glass products in construction which, in function of their own characteristocs, allow to design and calculate structural glass elements under safety conditions. This paper presents the evaluation and analysis of the damping properties of rectangular laminated glass plates of 1.938 m x 0.876 m with different thickness depending on the number of PVB interlayers arranged. By means of numerical simulation and experimental verification, using modal analysis, natural frequencies and damping of the glass plates were calculated, both under free boundary conditions and operational conditions for the impact test equipment used in the experimental program, as the European standard UNE-EN 12600:2003 specifies.

Evaluation of reactivity monitoring techniques at the Yalina – Booster subcritical facility

La gestión de los residuos radiactivos de vida larga producidos en los reactores nucleares constituye uno de los principales desafíos de la tecnología nuclear en la actualidad. Una posible opción para su gestión es la transmutación de los nucleidos de vida larga en otros de vida más corta. Los sistemas subcríticos guiados por acelerador (ADS por sus siglas en inglés) son una de las tecnologías en desarrollo para logar este objetivo. Un ADS consiste en un reactor nuclear subcrítico mantenido en un estado estacionario mediante una fuente externa de neutrones guiada por un acelerador de partículas. El interés de estos sistemas radica en su capacidad para ser cargados con combustibles que tengan contenidos de actínidos minoritarios mayores que los reactores críticos convencionales, y de esta manera, incrementar las tasas de trasmutación de estos elementos, que son los principales responsables de la radiotoxicidad a largo plazo de los residuos nucleares. Uno de los puntos clave que han sido identificados para la operación de un ADS a escala industrial es la necesidad de monitorizar continuamente la reactividad del sistema subcrítico durante la operación. Por esta razón, desde los años 1990 se han realizado varios experimentos en conjuntos subcríticos de potencia cero (MUSE, RACE, KUCA, Yalina, GUINEVERE/FREYA) con el fin de validar experimentalmente estas técnicas. En este contexto, la presente tesis se ocupa de la validación de técnicas de monitorización de la reactividad en el conjunto subcrítico Yalina-Booster. Este conjunto pertenece al Joint Institute for Power and Nuclear Research (JIPNR-Sosny) de la Academia Nacional de Ciencias de Bielorrusia. Dentro del proyecto EUROTRANS del 6º Programa Marco de la UE, en el año 2008 se ha realizado una serie de experimentos en esta instalación concernientes a la monitorización de la reactividad bajo la dirección del CIEMAT. Se han realizado dos tipos de experimentos: experimentos con una fuente de neutrones pulsada (PNS) y experimentos con una fuente continua con interrupciones cortas (beam trips). En el caso de los primeros, experimentos con fuente pulsada, existen dos técnicas fundamentales para medir la reactividad, conocidas como la técnica del ratio bajo las áreas de los neutrones inmediatos y retardados (o técnica de Sjöstrand) y la técnica de la constante de decaimiento de los neutrones inmediatos. Sin embargo, varios experimentos han mostrado la necesidad de aplicar técnicas de corrección para tener en cuenta los efectos espaciales y energéticos presentes en un sistema real y obtener valores precisos de la reactividad. En esta tesis, se han investigado estas correcciones mediante simulaciones del sistema con el código de Montecarlo MCNPX. Esta investigación ha servido también para proponer una versión generalizada de estas técnicas donde se buscan relaciones entre la reactividad el sistema y las cantidades medidas a través de simulaciones de Monte Carlo. El segundo tipo de experimentos, experimentos con una fuente continua e interrupciones del haz, es más probable que sea empleado en un ADS industrial. La versión generalizada de las técnicas desarrolladas para los experimentos con fuente pulsada también ha sido aplicada a los resultados de estos experimentos. Además, el trabajo presentado en esta tesis es la primera vez, en mi conocimiento, en que la reactividad de un sistema subcrítico se monitoriza durante la operación con tres técnicas simultáneas: la técnica de la relación entre la corriente y el flujo (current-to-flux), la técnica de desconexión rápida de la fuente (source-jerk) y la técnica del decaimiento de los neutrones inmediatos. Los casos analizados incluyen la variación rápida de la reactividad del sistema (inserción y extracción de las barras de control) y la variación rápida de la fuente de neutrones (interrupción larga del haz y posterior recuperación). ABSTRACT The management of long-lived radioactive wastes produced by nuclear reactors constitutes one of the main challenges of nuclear technology nowadays. A possible option for its management consists in the transmutation of long lived nuclides into shorter lived ones. Accelerator Driven Subcritical Systems (ADS) are one of the technologies in development to achieve this goal. An ADS consists in a subcritical nuclear reactor maintained in a steady state by an external neutron source driven by a particle accelerator. The interest of these systems lays on its capacity to be loaded with fuels having larger contents of minor actinides than conventional critical reactors, and in this way, increasing the transmutation rates of these elements, that are the main responsible of the long-term radiotoxicity of nuclear waste. One of the key points that have been identified for the operation of an industrial-scale ADS is the need of continuously monitoring the reactivity of the subcritical system during operation. For this reason, since the 1990s a number of experiments have been conducted in zero-power subcritical assemblies (MUSE, RACE, KUCA, Yalina, GUINEVERE/FREYA) in order to experimentally validate these techniques. In this context, the present thesis is concerned with the validation of reactivity monitoring techniques at the Yalina-Booster subcritical assembly. This assembly belongs to the Joint Institute for Power and Nuclear Research (JIPNR-Sosny) of the National Academy of Sciences of Belarus. Experiments concerning reactivity monitoring have been performed in this facility under the EUROTRANS project of the 6th EU Framework Program in year 2008 under the direction of CIEMAT. Two types of experiments have been carried out: experiments with a pulsed neutron source (PNS) and experiments with a continuous source with short interruptions (beam trips). For the case of the first ones, PNS experiments, two fundamental techniques exist to measure the reactivity, known as the prompt-to-delayed neutron area-ratio technique (or Sjöstrand technique) and the prompt neutron decay constant technique. However, previous experiments have shown the need to apply correction techniques to take into account the spatial and energy effects present in a real system and thus obtain accurate values for the reactivity. In this thesis, these corrections have been investigated through simulations of the system with the Monte Carlo code MCNPX. This research has also served to propose a generalized version of these techniques where relationships between the reactivity of the system and the measured quantities are obtained through Monte Carlo simulations. The second type of experiments, with a continuous source with beam trips, is more likely to be employed in an industrial ADS. The generalized version of the techniques developed for the PNS experiments has also been applied to the result of these experiments. Furthermore, the work presented in this thesis is the first time, to my knowledge, that the reactivity of a subcritical system has been monitored during operation simultaneously with three different techniques: the current-to-flux, the source-jerk and the prompt neutron decay techniques. The cases analyzed include the fast variation of the system reactivity (insertion and extraction of a control rod) and the fast variation of the neutron source (long beam interruption and subsequent recovery).

Shake-table tests of a reinforced concrete frame designed following modern codes: seismic performance and damage evaluation

This paper presents shake-table tests conducted on a two-fifths-scale reinforced concrete frame representing a conventional construction design under current building code provisions in the Mediterranean area. The structure was subjected to a sequence of dynamic tests including free vibrations and four seismic simulations in which a historical ground motion record was scaled to levels of increasing intensity until collapse. Each seismic simulation was associated with a different level of seismic hazard, representing very frequent, frequent, rare and very rare earthquakes. The structure remained basically undamaged and within the inter-story drift limits of the "immediate occupancy" performance level for the very frequent and frequent earthquakes. For the rare earthquake, the specimen sustained significant damage with chord rotations of up to 28% of its ultimate capacity and approached the upper bound limit of inter-story drift associated with "life safety". The specimen collapsed at the beginning of the "very rare" seismic simulation. Besides summarizing the experimental program, this paper evaluates the damage quantitatively at the global and local levels in terms of chord rotation and other damage indexes, together with the energy dissipation demands for each level of seismic hazard. Further, the ratios of column-to-beam moment capacity recommended by Eurocode 8 and ACI-318 to guarantee the formation of a strong column-weak beam mechanism are examined.

Multisensor data fusion for accurate modelling of mobile objects

In the last decade, multi-sensor data fusion has become a broadly demanded discipline to achieve advanced solutions that can be applied in many real world situations, either civil or military. In Defence,accurate detection of all target objects is fundamental to maintaining situational awareness, to locating threats in the battlefield and to identifying and protecting strategically own forces. Civil applications, such as traffic monitoring, have similar requirements in terms of object detection and reliable identification of incidents in order to ensure safety of road users. Thanks to the appropriate data fusion technique, we can give these systems the power to exploit automatically all relevant information from multiple sources to face for instance mission needs or assess daily supervision operations. This paper focuses on its application to active vehicle monitoring in a particular area of high density traffic, and how it is redirecting the research activities being carried out in the computer vision, signal processing and machine learning fields for improving the effectiveness of detection and tracking in ground surveillance scenarios in general. Specifically, our system proposes fusion of data at a feature level which is extracted from a video camera and a laser scanner. In addition, a stochastic-based tracking which introduces some particle filters into the model to deal with uncertainty due to occlusions and improve the previous detection output is presented in this paper. It has been shown that this computer vision tracker contributes to detect objects even under poor visual information. Finally, in the same way that humans are able to analyze both temporal and spatial relations among items in the scene to associate them a meaning, once the targets objects have been correctly detected and tracked, it is desired that machines can provide a trustworthy description of what is happening in the scene under surveillance. Accomplishing so ambitious task requires a machine learning-based hierarchic architecture able to extract and analyse behaviours at different abstraction levels. A real experimental testbed has been implemented for the evaluation of the proposed modular system. Such scenario is a closed circuit where real traffic situations can be simulated. First results have shown the strength of the proposed system.

A Ground-Truth Video Dataset for the Development and Evaluation of Vision-based Sense-and-Avoid systems

The importance of vision-based systems for Sense-and-Avoid is increasing nowadays as remotely piloted and autonomous UAVs become part of the non-segregated airspace. The development and evaluation of these systems demand flight scenario images which are expensive and risky to obtain. Currently Augmented Reality techniques allow the compositing of real flight scenario images with 3D aircraft models to produce useful realistic images for system development and benchmarking purposes at a much lower cost and risk. With the techniques presented in this paper, 3D aircraft models are positioned firstly in a simulated 3D scene with controlled illumination and rendering parameters. Realistic simulated images are then obtained using an image processing algorithm which fuses the images obtained from the 3D scene with images from real UAV flights taking into account on board camera vibrations. Since the intruder and camera poses are user-defined, ground truth data is available. These ground truth annotations allow to develop and quantitatively evaluate aircraft detection and tracking algorithms. This paper presents the software developed to create a public dataset of 24 videos together with their annotations and some tracking application results.

Evaluation of configurations of supply networks supported by it systems

Los sistemas transaccionales tales como los programas informáticos para la planificación de recursos empresariales (ERP software) se han implementado ampliamente mientras que los sistemas analíticos para la gestión de la cadena de suministro (SCM software) no han tenido el éxito deseado por la industria de tecnología de información (TI). Aunque se documentan beneficios importantes derivados de las implantaciones de SCM software, las empresas industriales son reacias a invertir en este tipo de sistemas. Por una parte esto es debido a la falta de métodos que son capaces de detectar los beneficios por emplear esos sistemas, y por otra parte porque el coste asociado no está identificado, detallado y cuantificado suficientemente. Los esquemas de coordinación basados únicamente en sistemas ERP son alternativas válidas en la práctica industrial siempre que la relación coste-beneficio esta favorable. Por lo tanto, la evaluación de formas organizativas teniendo en cuenta explícitamente el coste debido a procesos administrativos, en particular por ciclos iterativos, es de gran interés para la toma de decisiones en el ámbito de inversiones en TI. Con el fin de cerrar la brecha, el propósito de esta investigación es proporcionar métodos de evaluación que permitan la comparación de diferentes formas de organización y niveles de soporte por sistemas informáticos. La tesis proporciona una amplia introducción, analizando los retos a los que se enfrenta la industria. Concluye con las necesidades de la industria de SCM software: unas herramientas que facilitan la evaluación integral de diferentes propuestas de organización. A continuación, la terminología clave se detalla centrándose en la teoría de la organización, las peculiaridades de inversión en TI y la tipología de software de gestión de la cadena de suministro. La revisión de la literatura clasifica las contribuciones recientes sobre la gestión de la cadena de suministro, tratando ambos conceptos, el diseño de la organización y su soporte por las TI. La clasificación incluye criterios relacionados con la metodología de la investigación y su contenido. Los estudios empíricos en el ámbito de la administración de empresas se centran en tipologías de redes industriales. Nuevos algoritmos de planificación y esquemas de coordinación innovadoras se desarrollan principalmente en el campo de la investigación de operaciones con el fin de proponer nuevas funciones de software. Artículos procedentes del área de la gestión de la producción se centran en el análisis de coste y beneficio de las implantaciones de sistemas. La revisión de la literatura revela que el éxito de las TI para la coordinación de redes industriales depende en gran medida de características de tres dimensiones: la configuración de la red industrial, los esquemas de coordinación y las funcionalidades del software. La literatura disponible está enfocada sobre todo en los beneficios de las implantaciones de SCM software. Sin embargo, la coordinación de la cadena de suministro, basándose en el sistema ERP, sigue siendo la práctica industrial generalizada, pero el coste de coordinación asociado no ha sido abordado por los investigadores. Los fundamentos de diseño organizativo eficiente se explican en detalle en la medida necesaria para la comprensión de la síntesis de las diferentes formas de organización. Se han generado varios esquemas de coordinación variando los siguientes parámetros de diseño: la estructura organizativa, los mecanismos de coordinación y el soporte por TI. Las diferentes propuestas de organización desarrolladas son evaluadas por un método heurístico y otro basado en la simulación por eventos discretos. Para ambos métodos, se tienen en cuenta los principios de la teoría de la organización. La falta de rendimiento empresarial se debe a las dependencias entre actividades que no se gestionan adecuadamente. Dentro del método heurístico, se clasifican las dependencias y se mide su intensidad basándose en factores contextuales. A continuación, se valora la idoneidad de cada elemento de diseño organizativo para cada dependencia específica. Por último, cada forma de organización se evalúa basándose en la contribución de los elementos de diseño tanto al beneficio como al coste. El beneficio de coordinación se refiere a la mejora en el rendimiento logístico - este concepto es el objeto central en la mayoría de modelos de evaluación de la gestión de la cadena de suministro. Por el contrario, el coste de coordinación que se debe incurrir para lograr beneficios no se suele considerar en detalle. Procesos iterativos son costosos si se ejecutan manualmente. Este es el caso cuando SCM software no está implementada y el sistema ERP es el único instrumento de coordinación disponible. El modelo heurístico proporciona un procedimiento simplificado para la clasificación sistemática de las dependencias, la cuantificación de los factores de influencia y la identificación de configuraciones que indican el uso de formas organizativas y de soporte de TI más o menos complejas. La simulación de eventos discretos se aplica en el segundo modelo de evaluación utilizando el paquete de software ‘Plant Simulation’. Con respecto al rendimiento logístico, por un lado se mide el coste de fabricación, de inventario y de transporte y las penalizaciones por pérdida de ventas. Por otro lado, se cuantifica explícitamente el coste de la coordinación teniendo en cuenta los ciclos de coordinación iterativos. El método se aplica a una configuración de cadena de suministro ejemplar considerando diversos parámetros. Los resultados de la simulación confirman que, en la mayoría de los casos, el beneficio aumenta cuando se intensifica la coordinación. Sin embargo, en ciertas situaciones en las que se aplican ciclos de planificación manuales e iterativos el coste de coordinación adicional no siempre conduce a mejor rendimiento logístico. Estos resultados inesperados no se pueden atribuir a ningún parámetro particular. La investigación confirma la gran importancia de nuevas dimensiones hasta ahora ignoradas en la evaluación de propuestas organizativas y herramientas de TI. A través del método heurístico se puede comparar de forma rápida, pero sólo aproximada, la eficiencia de diferentes formas de organización. Por el contrario, el método de simulación es más complejo pero da resultados más detallados, teniendo en cuenta parámetros específicos del contexto del caso concreto y del diseño organizativo. ABSTRACT Transactional systems such as Enterprise Resource Planning (ERP) systems have been implemented widely while analytical software like Supply Chain Management (SCM) add-ons are adopted less by manufacturing companies. Although significant benefits are reported stemming from SCM software implementations, companies are reluctant to invest in such systems. On the one hand this is due to the lack of methods that are able to detect benefits from the use of SCM software and on the other hand associated costs are not identified, detailed and quantified sufficiently. Coordination schemes based only on ERP systems are valid alternatives in industrial practice because significant investment in IT can be avoided. Therefore, the evaluation of these coordination procedures, in particular the cost due to iterations, is of high managerial interest and corresponding methods are comprehensive tools for strategic IT decision making. The purpose of this research is to provide evaluation methods that allow the comparison of different organizational forms and software support levels. The research begins with a comprehensive introduction dealing with the business environment that industrial networks are facing and concludes highlighting the challenges for the supply chain software industry. Afterwards, the central terminology is addressed, focusing on organization theory, IT investment peculiarities and supply chain management software typology. The literature review classifies recent supply chain management research referring to organizational design and its software support. The classification encompasses criteria related to research methodology and content. Empirical studies from management science focus on network types and organizational fit. Novel planning algorithms and innovative coordination schemes are developed mostly in the field of operations research in order to propose new software features. Operations and production management researchers realize cost-benefit analysis of IT software implementations. The literature review reveals that the success of software solutions for network coordination depends strongly on the fit of three dimensions: network configuration, coordination scheme and software functionality. Reviewed literature is mostly centered on the benefits of SCM software implementations. However, ERP system based supply chain coordination is still widespread industrial practice but the associated coordination cost has not been addressed by researchers. Fundamentals of efficient organizational design are explained in detail as far as required for the understanding of the synthesis of different organizational forms. Several coordination schemes have been shaped through the variation of the following design parameters: organizational structuring, coordination mechanisms and software support. The different organizational proposals are evaluated using a heuristic approach and a simulation-based method. For both cases, the principles of organization theory are respected. A lack of performance is due to dependencies between activities which are not managed properly. Therefore, within the heuristic method, dependencies are classified and their intensity is measured based on contextual factors. Afterwards the suitability of each organizational design element for the management of a specific dependency is determined. Finally, each organizational form is evaluated based on the contribution of the sum of design elements to coordination benefit and to coordination cost. Coordination benefit refers to improvement in logistic performance – this is the core concept of most supply chain evaluation models. Unfortunately, coordination cost which must be incurred to achieve benefits is usually not considered in detail. Iterative processes are costly when manually executed. This is the case when SCM software is not implemented and the ERP system is the only available coordination instrument. The heuristic model provides a simplified procedure for the classification of dependencies, quantification of influence factors and systematic search for adequate organizational forms and IT support. Discrete event simulation is applied in the second evaluation model using the software package ‘Plant Simulation’. On the one hand logistic performance is measured by manufacturing, inventory and transportation cost and penalties for lost sales. On the other hand coordination cost is explicitly considered taking into account iterative coordination cycles. The method is applied to an exemplary supply chain configuration considering various parameter settings. The simulation results confirm that, in most cases, benefit increases when coordination is intensified. However, in some situations when manual, iterative planning cycles are applied, additional coordination cost does not always lead to improved logistic performance. These unexpected results cannot be attributed to any particular parameter. The research confirms the great importance of up to now disregarded dimensions when evaluating SCM concepts and IT tools. The heuristic method provides a quick, but only approximate comparison of coordination efficiency for different organizational forms. In contrast, the more complex simulation method delivers detailed results taking into consideration specific parameter settings of network context and organizational design.

Análisis de la degradación, desintegración y biodegradabilidad de bolsas de poliéster y almidón en compostaje de residuos urbanos: escalas de laboratorio e industrial

El principal objetivo de esta tesis es verificar que las bolsas biodegradables de copoliéster (PBAT) con base de almidón (UNE 13432: 2001) alcanzan los niveles de degradación y desintegración requeridos para su certificación (%D= ≥ 90%), medido en condiciones reales de compostaje industrial. Para lograr mayor representatividad, los ensayos se han realizado en dos plantas de tratamiento de residuos urbanos en las que se aplican las técnicas de compostaje más comunes en el ámbito europeo y nacional, pila y túnel, mediante el compostaje de la FORSU. Se llevaron a cabo dos tipos de ensayos. Por un lado se realizó un ensayo escala de laboratorio (ISO 14855), orientado como indicador de la biodegradabilidad del polímero en el formato bolsa comercializado. Por otro lado, se desarrollaron una batería de ensayos realizados en dos plantas de compostaje de residuos urbanos: el Centro de Tratamiento de Residuos de Torija (Ávila), que realiza el compostaje mediante pila volteada, y el Centro de Tratamiento de Residuos de Arenas de San Pedro (Ávila), que realiza el compostaje en túnel. Para la obtención de resultados se han contrastado parámetros como el porcentaje de biodegradación (%B), el porcentaje de desintegración (%D), degradación superficial de las muestras, calidad de la FORSU inicial (caracterizaciones y análisis físico-químico) y calidad del MB final (análisis físico-químico e IG). Atendiendo al objetivo general se demuestra que las bolsas de copoliéster con base de almidón certificadas (UNE EN 13432:2001) han alcanzado el 94,37% ± 0,007% de desintegración en la planta de compostaje de FORSU con pila volteada; y el 86,36% ± 0,151% en la planta de compostaje de FORSU con túnel estático. A pesar de la aparente diferencia, el resultado del análisis concluye que no existen diferencias estadísticamente significativas entre técnicas de compostaje. La presencia de impropios y el contendido de metales pesados en la FORSU no han influido en la desintegración de las bolsas de estudio. En cambio, se ha detectado una influencia estadísticamente significativa entre el contenido de materia orgánica total y de nutrientes de la FORSU y el porcentaje de desintegración de las muestras. No se detectado una relación estadísticamente significativa entre la presencia de bolsas de estudio en las concentraciones definidas, y la calidad del MB, medido mediante el análisis físico-químico, microbiológico y el IG del MB. La concentración de los metales pesados en la mayoría de las muestras de material bioestabilizado cumplió con los límites establecidos para la categoría A, aplicable al “compost” procedente de la fracción orgánica recogida de forma separada según el RD 506/2013 de productos fertilizantes. También se detectó fitotoxicidad alta (FA) según la metodología y criterios de valoración definidos. Esta fitotoxicidad no está relacionada con la presencia de las bolsas de estudio sino con la calidad de la FORSU de partida y/o con los productos liberados durante el proceso de compostaje. ABSTRACT The main objective of this thesis is to verify that the copolyester (PBAT) starch based (UNE 13432: 2001) biodegradable bags reach levels of degradation and disintegration required for it´s certification (% D = ≥ 90%), measured in terms of real industrial composting. The tests were performed at two municipal solid waste (MSW) treatment plants, where the most common composting techniques applied at European and national level were represented, windrow and tunnel. Two types of tests were carried out: First, a laboratory scale test (ISO 14855), as an indicator of the polymer biodegradation of the commercialized bag format. Second, a battery of tests was conducted at two MSW composting plants, Waste Treatment Center of Torija (Guadalajara), that makes compost by turned pile, and the Waste Treatment Center of Arenas de San Pedro (Ávila), where makes compost by static tunnel. To obtain the results, the parameters such as the biodegradation percentage (% B), the disintegration percentage (% D), surface degradation of the samples, the initial quality of FORSU (characterizations and physico-chemical analysis) and bioestabilithated material (MB) quality (physico-chemical analysis and IG) have been compared. In reference to the general aim It shows that the copolyester starch based certified (UNE-EN 13432) bags have reached 94.37% ± 0.007% of disintegration in the composting turned pile; and 86.36% ± 0.151% in the static tunnel. Despite the apparent difference, the result of the analysis concludes that there are no statistically significant differences between composting techniques. The presence of non-compostable materials and the heavy metals content in the FORSU has not affected in the disintegration of the bags. Instead, It has been detected a statistically significant influence over the total organic matter content and nutrient content in the FORSU and the samples disintegration percentage. A statistically significant relationship between the bag presence in the defined concentrations and the quality of MB measured by physical-chemical analysis, microbiological analysis and IG of the MB is not detected. The concentration of heavy metals in most MB samples was within the limits of A-Class, applicable to "compost" from organic waste collected separately according to RD 506/2013 of fertilizers. High phytotoxicity (FA) was also detected according to the methodology and evaluation defined. The phytotoxicity is not related to the presence of bags but it is with the FORSU initial quality and/or with the products released during the composting process.

Posibilidades de cultivo de nuevas especies marinas en el área mediterránea

La acuicultura, el cultivo y cría de animales y plantas acuáticas, representa en la actualidad una fuente esencial de proteína animal y vegetal altamente saludable y nutritiva, proporcionando un sistema de vida y de ingresos en todo el mundo. La acuicultura además de ser un motor para el desarrollo social y económico de las áreas costeras marinas y fluviales mundiales, supone en muchas regiones subdesarrolladas una garantía de alimento de alta calidad y es clave en la seguridad alimentaria de sus poblaciones. El desarrollo de la acuicultura se ha realizado fundamentalmente en los últimos 50 años, y ha sido sobre todo en la década de los años 80, cuando la acuicultura ha experimentado un fuerte crecimiento con tasas anuales que superan el 6%. Con el estancamiento de la producción pesquera y el incremento de la población mundial, la acuicultura se presenta como la única fuente posible de suministro de proteínas (vegetales y animales) de alta calidad, ricas en aceites omega 3 (EPA y DHA) de origen acuático. En la actualidad la producción procedente de la acuicultura supera los 95 millones de toneladas anuales, siendo ligeramente superior a los 94 millones de toneladas anuales provenientes de la pesca extractiva. De este total mundial acuícola, la producción asiática representa el 89%, mientras que la europea el 4,2% Aunque el 46% de la producción mundial acuícola se concentra únicamente en solo 10 especies, una de las principales características de la acuicultura es la gran diversidad de especies cultivadas, más de 500, realizándose su cría bajo diferentes tecnologías y sistemas productivos. El ámbito de esta tesis, es únicamente la acuicultura marina que se desarrolla en las aguas del mar mediterráneo, indistintamente de los sistemas y tecnología de producción utilizados. Los principales grupos de cultivo que se realizan en las aguas del Mediterráneo son los moluscos y los peces, siendo muy escasos los cultivos de otros grupos como crustáceos y macroalgas. La piscicultura marina mediterránea está dominada por el cultivo en jaulas flotantes de dos especies, la dorada (Sparus auratus) y la lubina (Dicentrarchus labrax). Estas dos especies y tras 30 años de experiencia de cultivo, mantienen todavía una ineficiencia productiva alta (reducida selección genética, lento crecimiento hasta talla comercial, alto factor de conversón del pienso…) y además ocupan un estrecho nicho de mercado, ya que prácticamente toda la comercialización de la dorada y lubina se realiza en fresco y sin elaborar ni transformar, a una talla media de 500 g. Para dar respuesta desde la acuicultura mediterránea al alto consumo y a la creciente demanda que en la Unión Europea existe de los productos acuícolas, y en especial los productos elaborados y transformados, es necesario de manera urgente, un aumento de la producción de las especies ya cultivadas (dorada y lubina) mediante la mejora de su eficiencia productiva, al mismo tiempo que se debe iniciar la producción industrial de nuevas especies piscícolas, mediante la diversificación de los cultivos. Para llevar a cabo esta diversificación, se hace necesario el establecimiento de una metodología clara, que asegure una selección de especies apropiadas y rentables para la industria acuícola mediterránea, cuyo cultivo sostenible debiera cumplir con los desafíos que el sector tiene. Nuevas especies que complementen y cubran las demandas actuales y futuras del mercado Europeo e Internacional de productos acuícolas. Nuevas especies con parámetros productivos eficientes, que garanticen unos costes productivos competitivos. Nuevas especies que puedan ser cultivadas utilizando como base la tecnología de producción ya existente en el sector. El objetivo de esta tesis es la definición y desarrollo de una metodología sencilla para la selección de nuevas especies piscícolas marinas para su cultivo eficiente y sostenible Y bajo la aplicación de esta metodología, la selección de un grupo de especies piscícolas para su cultivo rentable a corto y medio plazo (6-8 años) en el Mediterráneo. Para ello se ha definido y aplicado una metodología con la que se han evaluado diez especies candidatas, previamente escogidas de una serie de listas previas originadas en los distintos estudios y trabajos de diversificación realizados con anterioridad por otros equipos de investigación. Estas especies candidatas han sido: Seriola dumerili. (Seriola) , Argyrosomus regius (Corvina), Polyprion americanus (Cherna), Ephinephelus marginatus (Mero), Dentex dentex (Dentón), Pagrus pagrus (Pargo), Solea senegalensis (Lenguado del Senegal), Thunnus thynnus (Atún rojo), Mugil cephalus (Lisa), Coryphaena hippurus (Lampuga). El conjunto de estas especies ocupa un amplio y variado espectro dentro de las distintas áreas de mercado, productiva, tecnológica, y medioambiental . Y en todas ellas existe una experiencia mínima en sus diferentes fases de cultivo. En el desarrollo de la metodología de selección, en esta tesis se han definido diversos parámetros de evaluación, considerados como los más significativos y sencillos de aplicar. Los parámetros se han agrupado en tres bloques, el comercial, el productivo y el medioambiental. El Bloque de Mercado, comprende aquellos criterios que están relacionados con la comercialización de la especie. Calidad de la carne del pescado. Competencia con otras especies en el mercado. Potencial de Transformado. Precio de venta del pescado. El bloque Medioambiental incluye criterios del grado de idoneidad de la especie en la región y del grado de impacto ambiental de su cultivo. Rango de temperaturas del agua óptimo para el cultivo. Potencial impacto ambiental de su cultivo. Eslabón trófico de la especie.. El bloque Productivo, engloba los criterios y parámetros relacionados con el nivel de conocimiento y control que sobre su cultivo existen ( larvario, engorde, tecnología) Grado de control de la fase larvaria. Disponibilidad de alevines en el sector Crecimiento. Factor de conversión Aprovechamiento de la capacidad productiva instalada, Coste de inversión. Previa a la evaluación se han descrito las principales características de las especies candidatas en función del estado y experiencia actual sus cultivos. En la aplicación de estos criterios se han establecido matrices de evaluación y a cada criterio se le ha asignado un valor diferente en función de sus características y propiedades selectivas. Los resultados obtenidos mediante la aplicación de la metodología de evaluación propuesta, han señalado la seriola y la corvina como especies más recomendadas para su puesta en cultivo en el Mediterráneo a corto y medio plazo. Las otras dos especies seleccionadas han sido la lisa y la lampuga. Como conclusión final podemos señalar que el cultivo de nuevas especies es fundamentalmente para el desarrollo sostenible de la acuicultura mediterránea. Esta diversificación debe basarse en la aplicación de una metodología sencilla y práctica, que garantice una selección de especies cuyo cultivo sea rentable y abarquen nuevos segmentos de mercado. ABSTRACT Aquaculture, the cultivation and breeding of aquatic animals and plants, currently represents an essential source of highly nutritious and healthy protein that provides a way of life and income all over the world. Apart from being a social and economic driver in coastal and marine areas, it also entails a guaranteed high quality nourishment in many undeveloped areas being key to the alimentary safety of their population. Aquaculture has developed mainly in the last 50 years and experienced a high growth especially during the Eighties when the annual rates were above 6%. With fishing production stagnating and the global population increasing, aquaculture emerges as the only possible animal and vegetable protein source of aquatic origin, high in quality and omega 3 oils (EPA and DHA). Here and now, aquaculture production is over 95 million tons per year, which is slightly higher than the 94 million tons per year that come from extractive fisheries. From this aquaculture total, Asiatic production represents 89% while Europe´s is only 4.2%. Even though 46% of the global aquaculture production focuses just on 10 species, one of the main characteristics of aquaculture is the wide diversity of cultivated species –over 500– using different technologies and production systems. This PhD’s scope is only marine aquaculture in Mediterranean water, regardless of the technology or systems used. The main crop groups in the Mediterranean sea are molluscs and finfish, while crustacean and macroalgae cultivations are very limited. Mediterranean fish culture is dominated by the cultivation in floating cages of two species: Bream (Sparus auratus) and Bass (Dicentrarchus labrax). After 30 years of farming, these two species still keep a high productive inefficiency –reduced genetic selection, slow growth to marketable size, high feed conversion rate– and fill a narrow niche market as practically all bream and bass is sold fresh and whole, unprocessed and untransformed, with an average size of 500 grams. To meet the high consumption and growing demand of aquaculture products, in the European Union (especially those prepared and transformed), Mediterranean aquaculture needs to urgently increase the production of the species already under cultivation (Bass and Bream) by means of improving its productive efficiency and at the same time begin initiating industrial production of new species by diversifying the cultivation. To carry out this diversification it is necessary to establish a clear methodology that ensures the selection of adapted and profitable species for the Mediterranean aquaculture industry. The sustainable farming of these new species needs to meet the challenges this sector faces: New species that complement and meet the current and future needs of the European and International markets for aquaculture products. New species with efficient production parameters that ensure competitive production costs. New species that can be cultivated using already existing production technologies. The aim of this PhD is to define and develop a simple methodology for the selection of new marine fish species for their efficient and sustainable cultivation. And by applying this methodology, to select a group of fish species for its profitable crop in the short and medium term (6-8 years) in the Mediterranean. For this, a methodology has been defined and applied evaluating ten candidate species selected from a series of lists originated from different studies and from diversification works previously conducted by other research teams. These candidate species are: Seriola dumerili. (Greater amberjack), Argyrosomus regius (Meagre), Polyprion americanus (Wreckfish), Ephinephelus marginatus (Dusky grouper), Dentex dentex (Common dentex), Pagrus pagrus (Red porgy), Solea senegalensis (Senegal sole), Thunnus thynnus (Bluefin tuna), Mugil cephalus (Grey mullet), Coryphaena hippurus (Dolphinfish). All these species occupy a broad and varied spectrum within different productive, technological and environmental market areas. There is minimal experience in their different stages of cultivation for all of them. While developing the selection methodology several evaluation parameters have been defined in this PhD, considered the most significant and simple to apply. The parameters are grouped in three blocks: commercial, productivity and environmental. Market block comprises criteria related to the marketing of the species. Quality of the fish meatCompetition with other species in the marketTransformation potentialFish selling price Environment block includes criteria related to the degree of suitability of the species in the region and the degree of environmental impact of their cultivation. Optimal water temperature range for cultivationPotential environmental impact of their cultivationTrophic chain level. Productivity block includes criteria and parameters related to the level of knowledge and control over their cultivation (larval, ongrowing, technology) Degree of control of the larval stageAvailability of alevin in the sector GrowthFeed conversion rate. Exploitation of installed capacityInvestment cost Prior to the evaluation, the main characteristics of the candidate species have been described based on the current status and experience of their cultivations. When applying these criteria evaluation matrices have been established assigning to each criteria a different value depending on their characteristics and selective properties. The results obtained by applying the proposed assessment methodology have identified the Greater Amberjack and Meagre as the most recommended species for farming in the Mediterranean in the short and medium term. The other two selected species were the Grey Mullet and the Dolphinfish. In conclusion, the cultivation of new species is crucial for the sustainable development of Mediterranean aquaculture. This diversification has to be based on the application of a simple and practical methodology that guarantees a selection of species whose cultivation is profitable and covers new market segments.

Caracterización de las Propiedades Dinámicas de la Seda de Araña

El término Biomimética se ha hecho común en los medios científicos, se refiere al trabajo de diversos científicos (ingenieros, químicos, físicos, biólogos, etc.) que tratan de copiar los procesos biológicos y aplicarlos en distintas áreas tecnológicas y científicas. En este campo científico, uno de los productos naturales que llama más la atención es la telaraña. Numerosos científicos en todo el mundo tratan de copiar las propiedades de la seda que produce la araña, y lo más interesante es que hasta intentan reproducir el método que usan las arañas para fabricar la seda De la bibliografía consultada, se desprende la importancia de la seda en la vida de las arañas, pues toda actividad que realizan tiene que ver de alguna manera con este elemento. Uno de estos elementos es la tela de araña orbicular, que representa el objeto principal para la supervivencia de la araña y su especie. Las investigaciones realizadas en esta línea nos proporcionan información sobre sus magníficas propiedades mecánicas como de resistencia, elasticidad y tenacidad del hilo de seguridad (seda MA) segregada por una araña de la especie Argiope Argentata. El enfoque de la presente tesis se realiza desde una perspectiva analítica-experimental, tomando a la tela de araña como una clase especial de sistemas pretensados, llamados Tensegrity Structures. Se desarrolla un modelo conceptual que describe en forma aproximada el comportamiento dinámico de una estructura hecha de seda MA. Haciendo uso de las técnicas experimentales de vibraciones libres se realizan los ensayos experimentales. La evaluación de los resultados analíticos y experimentales reflejan claramente que la función principal de la tela de araña es la de convertir energía cinética en energía de deformación y primordialmente en energía de disipación, el cual se efectúa gracias a las propiedades viscoelásticas de la seda. La araña en forma instintiva recurre a la ayuda del aire (como elemento disipador) para el buen funcionamiento de la tela de araña al momento de la captura de las presas, disipándose el 99% de la energía total en los tres primeros ciclos de oscilación de la tela de araña luego del impacto de la presa. ABSTRACT The term Biomimetic has become a very common word in the scientific world to describe the reproduction of the biological processes and its application in the different technogycal and scientific areas. One of the most notably natural product of this field is the Spiderweb. In the present days, many scientists of the world are active working in the reproduction of the proprieties of the Spiderweb. Most interesting even more, is the attempt to reproduce the process of the production of the Spiderweb by the spider. Most of the bibliography references deals whit the importance of the Spiderweb silk in the life of the spiders and the orbicular Spiderweb represents the spider survival and of the species. The research conducted in this field provide information about the excellent mechanical proprieties such us strength, elasticity and tenacity of the safety fiber (silk MA Drag-line) segregated by a spider of the Argiope Argentata species. The present work is oriented to an analytical and experimental study considering the Spiderweb as a special class of pre-stressed systems called Tensegrity (tensional integrity) structures. A conceptual model maked up by a cord und a point mass has been developed. This model approximates the dynamics performance of the structure made of the silk MA. The evaluation of the analytical and experimental results clear described that the main function of the Spiderweb is the transformation of the kinetic energy in deformation energy, and mainly in dissipation energy thank to the viscoelastic proprieties of the Spiderweb. With the help of the Spiderweb, the spider instinctively resorts to the help of the surroundings air as a dissipation element. This permits to dissipative the 99% of the total energy during the three first oscillations cycles of the web after the impact of the victim.

Métodos diferenciales e interferométricos para la evaluación de deformaciones de la corteza terrestre mediante técnicas GNSS e InSAR = Differential and interferometric methods for evaluation of crustal deformation using GNSS and InSAR techniques

La actividad volcánica interviene en multitud de facetas de la propia actividad humana, no siempre negativas. Sin embargo, son más los motivos de peligrosidad y riesgo que incitan al estudio de la actividad volcánica. Existen razones de seguridad que inciden en el mantenimiento del seguimiento y monitorización de la actividad volcánica para garantizar la vida y la seguridad de los asentamientos antrópicos en las proximidades de los edificios volcánicos. En esta tesis se define e implementa un sistema de monitorización de movimientos de la corteza en las islas de Tenerife y La Palma, donde el impacto social que representa un aumento o variación de la actividad volcánica en las islas es muy severo. Aparte de la alta densidad demográfica del Archipiélago, esta población aumenta significativamente, en diferentes periodos a lo largo del año, debido a la actividad turística que representa la mayor fuente de ingresos de las islas. La población y los centros turísticos se diseminan predominantemente a lo largo de las costas y también a lo largo de los flancos de los edificios volcánicos. Quizá el mantenimiento de estas estructuras sociales y socio-económicas son los motivos más importantes que justifican una monitorización de la actividad volcánica en las Islas Canarias. Recientemente se ha venido trabajando cada vez más en el intento de predecir la actividad volcánica utilizando los nuevos sistemas de monitorización geodésica, puesto que la actividad volcánica se manifiesta anteriormente por deformación de la corteza terrestre y cambios en la fuerza de la gravedad en la zona donde más tarde se registran eventos volcánicos. Los nuevos dispositivos y sensores que se han desarrollado en los últimos años en materias como la geodesia, la observación de la Tierra desde el espacio y el posicionamiento por satélite, han permitido observar y medir tanto la deformación producida en el terreno como los cambios de la fuerza de la gravedad antes, durante y posteriormente a los eventos volcánicos que se producen. Estos nuevos dispositivos y sensores han cambiado las técnicas o metodologías geodésicas que se venían utilizando hasta la aparición de los mismos, renovando métodos clásicos y desarrollando otros nuevos que ya se están afianzando como metodologías probadas y reconocidas para ser usadas en la monitorización volcánica. Desde finales de la década de los noventa del siglo pasado se han venido desarrollando en las Islas Canarias varios proyectos que han tenido como objetivos principales el desarrollo de nuevas técnicas de observación y monitorización por un lado y el diseño de una metodología de monitorización volcánica adecuada, por otro. Se presenta aquí el estudio y desarrollo de técnicas GNSS para la monitorización de deformaciones corticales y su campo de velocidades para las islas de Tenerife y La Palma. En su implementación, se ha tenido en cuenta el uso de la infraestructura geodésica y de monitorización existente en el archipiélago a fin de optimizar costes, además de complementarla con nuevas estaciones para dar una cobertura total a las dos islas. Los resultados obtenidos en los proyectos, que se describen en esta memoria, han dado nuevas perspectivas en la monitorización geodésica de la actividad volcánica y nuevas zonas de interés que anteriormente no se conocían en el entorno de las Islas Canarias. Se ha tenido especial cuidado en el tratamiento y propagación de los errores durante todo el proceso de observación, medida y proceso de los datos registrados, todo ello en aras de cuantificar el grado de fiabilidad de los resultados obtenidos. También en este sentido, los resultados obtenidos han sido verificados con otros procedentes de sistemas de observación radar de satélite, incorporando además a este estudio las implicaciones que el uso conjunto de tecnologías radar y GNSS tendrán en un futuro en la monitorización de deformaciones de la corteza terrestre. ABSTRACT Volcanic activity occurs in many aspects of human activity, and not always in a negative manner. Nonetheless, research into volcanic activity is more likely to be motivated by its danger and risk. There are security reasons that influence the monitoring of volcanic activity in order to guarantee the life and safety of human settlements near volcanic edifices. This thesis defines and implements a monitoring system of movements in the Earth’s crust in the islands of Tenerife and La Palma, where the social impact of an increase (or variation) of volcanic activity is very severe. Aside from the high demographic density of the archipelago, the population increases significantly in different periods throughout the year due to tourism, which represents a major source of revenue for the islands. The population and the tourist centres are mainly spread along the coasts and also along the flanks of the volcanic edifices. Perhaps the preservation of these social and socio-economic structures is the most important reason that justifies monitoring volcanic activity in the Canary Islands. Recently more and more work has been done with the intention of predicting volcanic activity, using new geodesic monitoring systems, since volcanic activity is evident prior to eruption because of a deformation of the Earth’s crust and changes in the force of gravity in the zone where volcanic events will later be recorded. The new devices and sensors that have been developed in recent years in areas such as geodesy, the observation of the Earth from space, and satellite positioning have allowed us to observe and measure the deformation produced in the Earth as well as the changes in the force of gravity before, during, and after the volcanic events occur. The new devices and sensors have changed the geodetic techniques and methodologies that were used previously. The classic methods have been renovated and other newer ones developed that are now vouched for as proven recognised methodologies to be used for volcanic monitoring. Since the end of the 1990s, in the Canary Islands various projects have been developed whose principal aim has been the development of new observation and monitoring techniques on the one hand, and the design of an appropriate volcanic monitoring methodology on the other. The study and development of GNSS techniques for the monitoring of crustal deformations and their velocity field is presented here. To carry out the study, the use of geodetic infrastructure and existing monitoring in the archipelago have been taken into account in order to optimise costs, besides complementing it with new stations for total coverage on both islands. The results obtained in the projects, which are described below, have produced new perspectives in the geodetic monitoring of volcanic activity and new zones of interest which previously were unknown in the environment of the Canary Islands. Special care has been taken with the treatment and propagation of errors during the entire process of observing, measuring, and processing the recorded data. All of this was done in order to quantify the degree of trustworthiness of the results obtained. Also in this sense, the results obtained have been verified with others from satellite radar observation systems, incorporating as well in this study the implications that the joint use of radar technologies and GNSS will have for the future of monitoring deformations in the Earth’s crust.

Analysing the complexity of the model-based decision making processes within the industrial management context

PURPOSE The decision-making process plays a key role in organizations. Every decision-making process produces a final choice that may or may not prompt action. Recurrently, decision makers find themselves in the dichotomous question of following a traditional sequence decision-making process where the output of a decision is used as the input of the next stage of the decision, or following a joint decision-making approach where several decisions are taken simultaneously. The implication of the decision-making process will impact different players of the organization. The choice of the decision- making approach becomes difficult to find, even with the current literature and practitioners’ knowledge. The pursuit of better ways for making decisions has been a common goal for academics and practitioners. Management scientists use different techniques and approaches to improve different types of decisions. The purpose of this decision is to use the available resources as well as possible (data and techniques) to achieve the objectives of the organization. The developing and applying of models and concepts may be helpful to solve managerial problems faced every day in different companies. As a result of this research different decision models are presented to contribute to the body of knowledge of management science. The first models are focused on the manufacturing industry and the second part of the models on the health care industry. Despite these models being case specific, they serve the purpose of exemplifying that different approaches to the problems and could provide interesting results. Unfortunately, there is no universal recipe that could be applied to all the problems. Furthermore, the same model could deliver good results with certain data and bad results for other data. A framework to analyse the data before selecting the model to be used is presented and tested in the models developed to exemplify the ideas. METHODOLOGY As the first step of the research a systematic literature review on the joint decision is presented, as are the different opinions and suggestions of different scholars. For the next stage of the thesis, the decision-making process of more than 50 companies was analysed in companies from different sectors in the production planning area at the Job Shop level. The data was obtained using surveys and face-to-face interviews. The following part of the research into the decision-making process was held in two application fields that are highly relevant for our society; manufacturing and health care. The first step was to study the interactions and develop a mathematical model for the replenishment of the car assembly where the problem of “Vehicle routing problem and Inventory” were combined. The next step was to add the scheduling or car production (car sequencing) decision and use some metaheuristics such as ant colony and genetic algorithms to measure if the behaviour is kept up with different case size problems. A similar approach is presented in a production of semiconductors and aviation parts, where a hoist has to change from one station to another to deal with the work, and a jobs schedule has to be done. However, for this problem simulation was used for experimentation. In parallel, the scheduling of operating rooms was studied. Surgeries were allocated to surgeons and the scheduling of operating rooms was analysed. The first part of the research was done in a Teaching hospital, and for the second part the interaction of uncertainty was added. Once the previous problem had been analysed a general framework to characterize the instance was built. In the final chapter a general conclusion is presented. FINDINGS AND PRACTICAL IMPLICATIONS The first part of the contributions is an update of the decision-making literature review. Also an analysis of the possible savings resulting from a change in the decision process is made. Then, the results of the survey, which present a lack of consistency between what the managers believe and the reality of the integration of their decisions. In the next stage of the thesis, a contribution to the body of knowledge of the operation research, with the joint solution of the replenishment, sequencing and inventory problem in the assembly line is made, together with a parallel work with the operating rooms scheduling where different solutions approaches are presented. In addition to the contribution of the solving methods, with the use of different techniques, the main contribution is the framework that is proposed to pre-evaluate the problem before thinking of the techniques to solve it. However, there is no straightforward answer as to whether it is better to have joint or sequential solutions. Following the proposed framework with the evaluation of factors such as the flexibility of the answer, the number of actors, and the tightness of the data, give us important hints as to the most suitable direction to take to tackle the problem. RESEARCH LIMITATIONS AND AVENUES FOR FUTURE RESEARCH In the first part of the work it was really complicated to calculate the possible savings of different projects, since in many papers these quantities are not reported or the impact is based on non-quantifiable benefits. The other issue is the confidentiality of many projects where the data cannot be presented. For the car assembly line problem more computational power would allow us to solve bigger instances. For the operation research problem there was a lack of historical data to perform a parallel analysis in the teaching hospital. In order to keep testing the decision framework it is necessary to keep applying more case studies in order to generalize the results and make them more evident and less ambiguous. The health care field offers great opportunities since despite the recent awareness of the need to improve the decision-making process there are many opportunities to improve. Another big difference with the automotive industry is that the last improvements are not spread among all the actors. Therefore, in the future this research will focus more on the collaboration between academia and the health care sector.

Safety study of transcranial static magnetic field stimulation (tSMS) of the human cortex

Transcranial static magnetic field stimulation (tSMS) in humans reduces cortical excitability. Objective: The objective of this study was to determine if prolonged tSMS (2 h) could be delivered safely in humans. Safety limits for this technique have not been described. Methods: tSMS was applied for 2 h with a cylindric magnet on the occiput of 17 healthy subjects. We assessed tSMS-related safety aspects at tissue level by measuring levels of neuron-specific enolase (NSE,a marker of neuronal damage) and S100 (a marker of glial reactivity and damage). We also included an evaluation of cognitive side effects by using a battery of visuomotor and cognitive tests. Results: tSMS did not induce any significant increase in NSE or S100. No cognitive alteration was detected. Conclusions: Our data indicate that the application of tSMS is safe in healthy human subjects, at least within these parameters

A UNIVERSIDADE CORPORATIVA E O TREINAMENTO INDUSTRIAL A DISTÂNCIA PARA PROFISSIONAIS DE MANUTENÇÃO

Este trabalho trata dos principais aspectos envolvidos na avaliação e características conceituais acerca dos fundamentos e práticas do ensino a distância enfocando o treinamento industrial a distância para profissionais de manutenção, utilizando a internet como principal ferramenta e o desafio de relacionar a tecnologia com a metodologia voltada para o profissional técnico operacional. A internet é uma ferramenta que pode ser utilizada para o ensino em geral, ela permite acesso fácil a uma infinidade de material informativo autêntico e atualizado, além de exemplos concretos e interativos na perspectiva de transformar a informação recebida por meios eletrônicos em conhecimento sólido adquirido. Diante disso, a análise do trabalho recai, num primeiro momento, sobre os pressupostos que criaram o treinamento industrial, o treinamento na área de manutenção industrial e, os aspectos da estrutura que cria o treinamento industrial a distância, em seguida, aprofundamos-nos no conhecimento acerca das técnicas que envolvem o treinamento para profissionais da área de manutenção industrial a distância. Também é apresentada a experiência dos cursos profissionalizantes a distância através de vários meios e a experiências dos portais de educação a distância voltados para área de manutenção industrial.

A UNIVERSIDADE CORPORATIVA E O TREINAMENTO INDUSTRIAL A DISTÂNCIA PARA PROFISSIONAIS DE MANUTENÇÃO

Este trabalho trata dos principais aspectos envolvidos na avaliação e características conceituais acerca dos fundamentos e práticas do ensino a distância enfocando o treinamento industrial a distância para profissionais de manutenção, utilizando a internet como principal ferramenta e o desafio de relacionar a tecnologia com a metodologia voltada para o profissional técnico operacional. A internet é uma ferramenta que pode ser utilizada para o ensino em geral, ela permite acesso fácil a uma infinidade de material informativo autêntico e atualizado, além de exemplos concretos e interativos na perspectiva de transformar a informação recebida por meios eletrônicos em conhecimento sólido adquirido. Diante disso, a análise do trabalho recai, num primeiro momento, sobre os pressupostos que criaram o treinamento industrial, o treinamento na área de manutenção industrial e, os aspectos da estrutura que cria o treinamento industrial a distância, em seguida, aprofundamos-nos no conhecimento acerca das técnicas que envolvem o treinamento para profissionais da área de manutenção industrial a distância. Também é apresentada a experiência dos cursos profissionalizantes a distância através de vários meios e a experiências dos portais de educação a distância voltados para área de manutenção industrial.

Ex vivo evaluation of a Taylor-Couette flow, immobilized heparinase I device for clinical application

Efficient and safe heparin anticoagulation has remained a problem for continuous renal replacement therapies and intermittent hemodialysis for patients with acute renal failure. To make heparin therapy safer for the patient with acute renal failure at high risk of bleeding, we have proposed regional heparinization of the circuit via an immobilized heparinase I filter. This study tested a device based on Taylor-Couette flow and simultaneous separation/reaction for efficacy and safety of heparin removal in a sheep model. Heparinase I was immobilized onto agarose beads via cyanogen bromide activation. The device, referred to as a vortex flow plasmapheretic reactor, consisted of two concentric cylinders, a priming volume of 45 ml, a microporous membrane for plasma separation, and an outer compartment where the immobilized heparinase I was fluidized separately from the blood cells. Manual white cell and platelet counts, hematocrit, total protein, and fibrinogen assays were performed. Heparin levels were indirectly measured via whole-blood recalcification times (WBRTs). The vortex flow plasmapheretic reactor maintained significantly higher heparin levels in the extracorporeal circuit than in the sheep (device inlet WBRTs were 1.5 times the device outlet WBRTs) with no hemolysis. The reactor treatment did not effect any physiologically significant changes in complete blood cell counts, platelets, and protein levels for up to 2 hr of operation. Furthermore, gross necropsy and histopathology did not show any significant abnormalities in the kidney, liver, heart, brain, and spleen.