Improving the stability of an oxime based electrochemical microsensor for organo-phosphate vapor detection

A micro gas sensor has been developed by our group for the detection of organo-phosphate vapors using an aqueous oxime solution. The analyte diffuses from the high flow rate gas stream through a porous membrane to the low flow rate aqueous phase. It reacts with the oxime PBO (1-Phenyl-1,2,3,-butanetrione 2-oxime) to produce cyanide ions, which are then detected electrochemically from the change in solution potential. Previous work on this oxime based electrochemistry indicated that the optimal buffer pH for the aqueous solution was approximately 10. A basic environment is needed for the oxime anion to form and the detection reaction to take place. At this specific pH, the potential response of the sensor to an analyte (such as acetic anhydride) is maximized. However, sensor response slowly decreases as the aqueous oxime solution ages, by as much as 80% in first 24 hours. The decrease in sensor response is due to cyanide which is produced during the oxime degradation process, as evidenced by the cyanide selective electrode. Solid phase micro-extraction carried out on the oxime solution found several other possible degradation products, including acetic acid, N-hydroxy benzamide, benzoic acid, benzoyl cyanide, 1-Phenyl 1,3-butadione, 2-isonitrosoacetophenone and an imine derived from the oxime. It was concluded that degradation occurred through nucleophilic attack by a hydroxide or oxime anion to produce cyanide, as well as a nitrogen atom rearrangement similar to Beckmann rearrangement. The stability of the oxime in organic solvents is most likely due to the lack of water, and specifically hydroxide ions. The reaction between oxime and organo-phosphate to produce cyanide ions requires hydroxide ions, and therefore pure organic solvents are not compatible with the current micro-sensor electrochemistry. By combining a concentrated organic oxime solution with the basic aqueous buffer just prior to being used in the detection process, oxime degradation can be avoided while preserving the original electrochemical detection scheme. Based on beaker cell experiments with selective cyanide sensitive electrodes, ethanol was chosen as the best organic solvent due to its stabilizing effect on the oxime, minimal interference with the aqueous electrochemistry, and compatibility with the current microsensor material (PMMA). Further studies showed that ethanol had a small effect on micro-sensor performance by reducing the rate of cyanide production and decreasing the overall response time. To avoid incomplete mixing of the aqueous and organic solutions, they were pre-mixed externally at a 10:1 ratio, respectively. To adapt the microsensor design to allow for mixing to take place within the device, a small serpentine channel component was fabricated with the same dimensions and material as the original sensor. This allowed for seamless integration of the microsensor with the serpentine mixing channel. Mixing in the serpentine microchannel takes place via diffusion. Both detector potential response and diffusional mixing improve with increased liquid residence time, and thus decreased liquid flowrate. Micromixer performance was studies at a 10:1 aqueous buffer to organic solution flow rate ratio, for a total rate of 5.5 μL/min. It was found that the sensor response utilizing the integrated micromixer was nearly identical to the response when the solutions were premixed and fed at the same rate.

Adhesion molecules and chemokines: relation to anthropometric, body composition, biochemical and dietary variables

Introduction: Among the inflammatory mediators involved in the pathogenesis of obesity, the cell adhesion molecules P-selectin, E-selectin, VCAM-1, ICAM-1 and the chemokine MCP-1 stand out. They play a crucial role in adherence of cells to endothelial surfaces, in the integrity of the vascular wall and can be modulated by body composition and dietary pattern. Objectives: To describe and discuss the relation of these cell adhesion molecules and chemokines to anthropometric, body composition, dietary and biochemical markers. Methods: Papers were located using scientific databases by topic searches with no restriction on year of publication. Results: All molecules were associated positively with anthropometric markers, but controversial results were found for ICAM-1 and VCAM-1. Not only obesity, but visceral fat is more strongly correlated with E-selectin and MCP-1 levels. Weight loss influences the reduction in the levels of these molecules, except VCAM-1. The distribution of macronutrients, excessive consumption of saturated and trans fat and a Western dietary pattern are associated with increased levels. The opposite could be observed with supplementation of w-3 fatty acid, healthy dietary pattern, high calcium diet and high dairy intake. Regarding the biochemical parameters, they have inverse relation to HDLC and positive relation to total cholesterol, triglycerides, blood glucose, fasting insulin and insulin resistance. Conclusion: Normal anthropometric indicators, body composition, biochemical parameters and eating pattern positively modulate the subclinical inflammation that results from obesity by reducing the cell adhesion molecules and chemokines.

Recuperação de carotenóides microbianos por diferentes técnicas de ruptura celular

O objetivo deste trabalho foi utilizar diferentes técnicas químicas (dimetilsulfóxido, ácido clorídrico, acético e lático), técnicas mecânicas (banho ultrassônico, abrasão com pérolas de vidro, maceração com terra diatomácea, ruptor ultrassônico e imersão em nitrogênio líquido) e técnica enzimática (preparado enzimático comercial Glucanex®) para a recuperação de carotenoides a partir da ruptura da parede celular das leveduras Sporidiobolus pararoseus e Rhodotorula mucilaginosa isoladas de amostras ambientais. Para isso a obtenção de biomassa foi realizada através de cultivos submersos no meio YM, a 25 °C, 180 rpm por 168 h. Para a ruptura celular, a operação de congelamento da biomassa (-18°C por 48 h) foi estudada. Os métodos de secagem convencional por ar forçado (35°C/48h) e liofilização (-80°C/48h, em ultrafreezer, seguido de liofilizador até alcançar 2% de umidade da amostra) também foram avaliados. Nas técnicas químicas aplicadas, o dimetilsulfóxido apresentou os melhores resultados para as duas leveduras, porém o seu uso é limitado devido a sua toxicidade. Para S. pararoseus, os maiores valores encontrados foram para o ácido clorídrico, seguido do acético e do lático, sendo detectada diferença entre eles quando aplicado o congelamento. Com R. mucilaginosa, os maiores valores foram encontrados para os ácidos acético e lático, seguido do ácido clorídrico, no qual o congelamento da biomassa também não influenciou a recuperação dos carotenoides. Dentre as técnicas mecânicas estudadas, para a levedura S. pararoseus, o banho ultrassônico e a abrasão com pérolas de vidro apresentaram os resultados mais promissores comparados ao DMSO (84,79±2,34 e 76,87±2,06 μg/g respectivamente), onde o processo de congelamento da biomassa não influenciou positivamente no percentual de extratibilidade e na concentração específica dos carotenoides quando utilizada estas técnicas. Com Rhodotorula mucilaginosa, o banho ultrassônico propiciou a recuperação da maior concentração específica de carotenoides (193,5±25,8 μg/g), sendo que o processo de congelamento também não influenciou positivamente no percentual de extratibilidade e na concentração específica dos carotenoides. Através do Delineamento Central Composto Rotacional (DCCR) 23 foi possível avaliar que a levedura S. pararoseus não demonstrou nenhum efeito sob as variáveis pH, temperatura e concentração de enzima. Assim, a melhor condição de trabalho escolhida foi pH 7,4, 30 ºC e concentração de enzima de 1,0 g/gcs, onde apresentou a concentração específica de 42,6 μg/g e volumétrica de 308 μg/L de carotenoides. Para R. mucilaginosa, a condição ótima foi definida como 1,0 g/gcs, pH 5,0 e temperatura de 30 ºC, onde foi encontrado 115,1±8,1 μg/g e 470,1±38,8 μg/L para a concentração específica e volumétrica de carotenoides, respectivamente. A utilização de técnicas combinadas empregando banho ultrassônico e lise enzimática não proporcionou melhorias nos resultados para ambas as leveduras. A liofilização provocou um ganho de 20% e 13,7% na concentração específica dos carotenoides das leveduras S. pararoseus e R. mucilaginosa, respectivamente, onde o congelamento da biomassa não influenciou significativamente (p<0,05) a recuperação de carotenoides provenientes das duas leveduras, podendo ser eliminada do processo. Assim, para S. pararoseus o banho ultrassônico e as pérolas de vidro apresentaram os melhores resultados na recuperação de carotenoides, e para R. mucilaginosa o melhor resultado foi alcançado com o banho ultrassônico.

Estudo da influência da morfologia de nanopartículas de sílica mesoporosa na liberação do anticancerígeno indol-3-carbinol

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Ceilândia, Programa de Pós-graduação em Ciências e Tecnologias em Saúde, 2015.

Thermotolerant cyclamen with reduced acrolein and methyl vinyl ketone

Reduced levels of trienoic fatty acids (TAs) in chloroplast membranes induce thermotolerance in several plant species, but the underlying mechanisms remain unclear. TA peroxidation in plant cell membranes generates cytotoxic, TA-derived compounds containing alpha,beta-unsaturated carbonyl groups. The relationship between low TA levels and the amounts of cytotoxic TA-derived compounds was examined using thermotolerant transgenic cyclamen (Cyclamen persicum Mill.) with low TA contents. Changes in the levels of the cytotoxic TA-derived acrolein (ACR), methyl vinyl ketone (MVK), (E)-2-hexenal, 4-hydroxy-2-nonenal, and malondialdehyde were analysed in the leaf tissues of wild-type (WT) and thermotolerant transgenic cyclamen under heat stress. Levels of ACR and MVK in the WT increased in parallel with the occurrence of heat-induced tissue damage, whereas no such changes were observed in the thermotolerant transgenic lines. Furthermore, exogenous ACR and MVK infiltrated into leaves to concentrations similar to those observed in heat-stressed WT leaves caused similar disease symptoms. These results suggest that thermotolerance in transgenic cyclamen depends on reduced production rates of ACR and MVK under heat stress, due to the low level of TAs in these plants.

The structural and mechanical integrity of historic wood

Little is known about historic wood as it ages naturally. Instead, most studies focus on biological decay, as it is often assumed that wood remains otherwise stable with age. This PhD project was organised by Historic Scotland and the University of Glasgow to investigate the natural chemical and physical aging of wood. The natural aging of wood was a concern for Historic Scotland as traditional timber replacement is the standard form of repair used in wooden cultural heritage; replacing rotten timber with new timber of the same species. The project was set up to look at what differences could exist both chemically and physically between old and new wood, which could put unforeseen stress on the joint between them. Through Historic Scotland it was possible to work with genuine historic wood from two species, Oak and Scots pine, both from the 1500’s, rather than relying on artificial aging. Artificial aging of wood is still a debated topic, with consideration given to whether it is truly mimicking the aging process or just damaging the wood cells. The chemical stability of wood was investigated using Fourier-transform infrared (FTIR) microscopy, as well as wet chemistry methods including a test for soluble sugars from the possible breakdown of the wood polymers. The physical properties assessed included using a tensile testing machine to uncover possible differences in mechanical properties. An environmental chamber was used to test the reaction to moisture of wood of different ages, as moisture is the most damaging aspect of the environment to wooden cultural objects. The project uncovered several differences, both physical and chemical, between the modern and historic wood which could affect the success of traditional ‘like for like’ repairs. Both oak and pine lost acetyl groups, over historic time, from their hemicellulose polymers. This chemical reaction releases acetic acid, which had no effect on the historic oak but was associated with reduced stiffness in historic pine, probably due to degradation of the hemicellulose polymers by acid hydrolysis. The stiffness of historic oak and pine was also reduced by decay. Visible pest decay led to loss of wood density but there was evidence that fungal decay, extending beyond what was visible, degraded the S2 layer of the pine cell walls, reducing the stiffness of the wood by depleting the cellulose microfibrils most aligned with the grain. Fungal decay of polysaccharides in pine wood left behind sugars that attracted increased levels of moisture. The degradation of essential polymers in the wood structure due to age had different impacts on the two species of wood, and raised questions concerning both the mechanism of aging of wood and the ways in which traditional repairs are implemented, especially in Scots pine. These repairs need to be done with more care and precision, especially in choosing new timber to match the old. Within this project a quantitative method of measuring the microfibril angle (MFA) of wood using polarised Fourier transform infrared (FTIR) microscopy has been developed, allowing the MFA of both new and historic pine to be measured. This provides some of the information needed for a more specific match when selecting replacement timbers for historic buildings.

Síntese de ésteres graxos de chlorella sp. utilizando os processos de extração-transesterificação e transesterificação in situ

Este trabalho teve como objetivo realizar estudo comparativo dos processos de extração-transesterificação e transesterificação in situ para a síntese de ésteres metílicos e etílicos a partir da microalga Chlorella sp. Utilizando o processo de extração-transesterificação, a extração dos lipídeos foi realizada a partir da biomassa seca de Chlorella sp., pelo uso de três diferentes solventes, clorofórmio:metanol, etanol e metanol, sendo o maior rendimento, 12,3%, obtido com a mistura clorofórmio:metanol (2:1 v/v). Independente do solvente extrator utilizado, as frações lipídicas obtidas apresentaram altos índices de acidez que variaram de 39,39 a 112,76 mg KOH/g. Após, os ésteres alquilicos graxos foram obtidos através da transesterificação das frações lipídicas realizada com metanol e etanol (razão molar álcool:extrato lipidico, 30:1) na presença de 10% de H2SO4 como catalisador a temperatura de 100 oC por 4h. A transesterificação in situ (alcoolise direta) aplicada a biomassa de Chlorella sp, foi realizada a 60 e 100 oC por 4 h usando 20% de H2SO4 com base na biomassa seca. A reação foi realizada a partir de 50 g de biomassa seca na presença de 150 mL de álcool (etanol ou metanol) A partir do método de transesterificação in situ foram obtidos maiores rendimentos de ésteres alquilicos graxos (11,0%), quando comparado ao processo de extração-transesterificação (8,1%). Os produtos purificados apresentaram teores de ésteres que variaram de 75,4% a 99,8%. A variação da temperatura de reação da transesterificação in situ não teve influência significativa nos rendimentos dos produtos.

Le rôle des acides gras oméga-3 sur la balance énergétique, la régulation de l’appétit, l’état émotionnel et l’implication du récepteur GPR120

L’obésité est un facteur de risque lié à des problèmes physiques, émotionnels et comportementaux. Aujourd’hui, l’alimentation est composée d’un régime typiquement occidental «Western diet» qui est riche en acides gras saturés (AGS) et pauvre en acides gras polyinsaturés (AGPI) tel que les oméga-3 (N-3) et occasionnant un déséquilibre du ratio alimentaire N-6/N-3. Ce déséquilibre est une des causes de la prévalence des maladies mentales y compris celles des troubles de l'humeur et de l’anxiété. L’acide docosahexaénoïque (ADH, 22: 6 n-3) est l’acide gras (AG) le plus abondant dans le cerveau et son accumulation est particulièrement élevée pendant la période périnatale. Il joue un rôle important dans le développement neuronal et d'autres fonctions du cerveau tel l'apprentissage et la mémoire. Des perturbations de l’environnement périnatal peuvent influencer à très long terme l’avenir de la descendance en la rendant plus susceptible de développer des problèmes d’obésité dans un contexte nutritionnel riche. On ignore cependant si le déficit alimentaire chez la mère et particulièrement en ADH aura un impact sur la motivation alimentaire de la progéniture. L’objectif principal de cette thèse est d’étudier le rôle potentiel des N-3 sur la balance énergétique, la motivation alimentaire, la dépression et le niveau d’anxiété des descendants de souris mâles adultes assujetties à une alimentation riche en gras. Nos données ont démontré qu‘un régime maternel déficitaire en ADH durant la période périnatale incitait la descendance à fournir plus d’effort afin d’obtenir un aliment palatable. Ceci entraînerait un dérèglement de l’homéostasie énergétique en augmentant le gain de poids et en diminuant l’activité locomotrice tout en exacerbant le comportement de type anxieux dès que les souris sont exposées à un milieu obésogène. Les acides gras libres (AGL) sont des nutriments essentiels fonctionnant comme des molécules de signalisation dans le cerveau en ayant des récepteurs qui jouent un rôle important dans le contrôle du métabolisme énergétique. Parmi eux, on distingue un récepteur couplé à la protéine G (GPCR), le GPR120. Ce récepteur activé par les AGPI ω-3 intervient dans les mécanismes anti-inflammatoires et insulino-résistants via les N-3. Une mutation dans le gène GPR120 occasionnée par une réduction de l’activité de signalisation du gène est liée à l’obésité humaine. L'objectif premier de cette deuxième étude était d’évaluer l'impact de la stimulation pharmacologique de GPR120 dans le système nerveux central (SNC) sur l'alimentation, les dépenses d'énergie, le comportement de type anxieux et la récompense alimentaire. Nos résultats démontrent qu’une injection centrale aiguë d'agoniste GPR120 III réduit la prise alimentaire ad libitum et la motivation alimentaire pour un aliment riche en gras et en sucre; ainsi que les comportements de type anxieux. L’injection centrale chronique (21 jours) de ce même agoniste GPR120 III transmis par une pompe osmotique a démontré que les souris placées sous diète hypercalorique (HFD n’ont présenté aucune modification lors de la prise alimentaire ni de gain de poids mais qu’il y avait comparativement au groupe de véhicule, une réduction du comportement de type anxieux, que ce soit dans le labyrinthe en croix surélevé (LCS) ou dans le test à champ ouvert (OFT). L’ADH est reconnu pour ses propriétés anorexigènes au niveau central. De plus, la stimulation des récepteurs de GPR120 au niveau du cerveau avec un agoniste synthétique peut produire un effet intense intervenir sur le comportement lié à l'alimentation des rongeurs. Trouver une approche visant à contrôler à la fois la neuroinflammation, la récompense alimentaire et les troubles émotionnels aiderait assurément au traitement de l'obésité et du diabète de type 2.

Aditivos químicos e biológicos na ensilagem de cana-de-açúcar: 1. composição química das silagens, ingestão, digestibilidade e comportamento ingestivo

Avaliou-se o efeito da inclusão de aditivos na ensilagem de cana-de-açúcar (Saccharum officinarum L.) sobre a composição químico-bromatológica das silagens, o comportamento ingestivo, o consumo voluntário e a digestibilidade em bovinos de corte. Utilizaram-se cinco novilhos da raça Nelore providos de cânula ruminal, alocados em delineamento quadrado latino 5 ´ 5 e alimentados com dietas com 65% de volumoso na MS. Foram avaliadas cinco silagens (base úmida): controle - cana-de-açúcar sem aditivos; uréia - cana-de-açúcar + 0,5% uréia; benzoato - cana-de-açúcar + 0,1% de benzoato de sódio; LP - cana-de-açúcar inoculada com Lactobacillus plantarum (1 ´ 10(6) ufc/g MV); LB - cana-de-açúcar inoculada com L. buchneri (3,6 ´ 10(5) ufc/g forragem). A forragem foi armazenada em silos do tipo poço por 90 dias antes do fornecimento aos animais. A composição químico-bromatológica da cana-de-açúcar foi alterada após a ensilagem, em relação à cana-de-açúcar original, com redução no teor de carboidratos solúveis e na digestibilidade in vitro e elevação relativa nos teores de FDN e FDA. Os teores de etanol (0,30% da MS) e ácidos orgânicos (0,99% de ácido lático e 2,31% de acético) foram baixos e semelhantes entre as silagens. Os aditivos aplicados na ensilagem não promoveram alterações no consumo e na digestibilidade aparente da MS (7,2 kg/dia e 63,6%, respectivamente). O comportamento ingestivo dos animais também não foi alterado, com tempos médios de 230,6; 519,6 e 672,8 minutos/dia despendidos com ingestão de ração, ruminação e ócio, respectivamente. Os aditivos acrescidos à cana-de-açúcar promoveram pequenas alterações na maioria das variáveis avaliadas.

Determinação eletroanalítica de ácido salicílico em produto dermatológico com eletrodos de nanotubos de carbono e nanopartículas de óxido de ferro

Dissertação (mestrado)—Universidade de Brasília, Instituto de Química, Programa de Pós-Graduação em Tecnologias Química e Biológica, 2016.

Biological and structural characterization of a new PLA(2) from the Crotalus durissus collilineatus venom

In the present article we report on the biological characterization and amino acid sequence of a new basic Phospholipases A(2) (PLA(2)) isolated from the Crotalus durissus collilineatus venom (Cdcolli F6), which showed the presence of 122 amino acid residues with a pI value of 8.3, molecular mass of 14 kDa and revealed an amino acid sequence identity of 80% with crotalic PLA(2)s such as Mojave B, Cdt F15, and CROATOX. This homology, however, dropped to 50% if compared to other sources of PLA(2)s such as from the Bothrops snake venom. Also, this PLA(2) induced myonecrosis, although this effect was lower than that of BthTx-I or whole crotoxin and it was able to induce a strong blockage effect on the chick biventer neuromuscular preparation, independently of the presence of the acid subunid (crotapotin). The neurotoxic effect was strongly reduced by pre-incubation with heparin or with anhydrous acetic acid and rho-BPB showed a similar reduction. The rho-BPB did not reduce significantly the myotoxic activity induced by the PLA(2), but the anhydrous acetic acid treatment and the pre-incu-bation of PLA(2) with heparin reduced significantly its effects. This protein showed a strong antimicrobial activity against Xanthomonas axonopodis passiflorae (Gram-negative), which was drastically reduced by incubation of this PLA(2) with rho-BPB, but this effect was marginally reduced after treatment with anhydrous acetic acid. Our findings here allow to speculate that basic amino acid residues on the C-terminal and molecular regions near catalytic site regions such as Calcium binding loop or rho-wing region may be involved in the binding of this PLA(2) to the molecular receptor to induce the neurotoxic effect. The bactericidal effect, however, was completely dependent on the enzymatic activity of this protein.

Post-CMOS compatible high-throughput fabrication of AIN-based piezoelectric microcantilevers

A post-complementary metal oxide semiconductor (CMOS) compatible microfabrication process of piezoelectric cantilevers has been developed. The fabrication process is suitable for standard silicon technology and provides low-cost and high-throughput manufacturing. This work reports design, fabrication and characterization of piezoelectric cantilevers based on aluminum nitride (AlN) thin films synthesized at room temperature. The proposed microcantilever system is a sandwich structure composed of chromium (Cr) electrodes and a sputtered AlN film. The key issue for cantilever fabrication is the growth at room temperature of the AlN layer by reactive sputtering, making possible the innovative compatibility of piezoelectric MEMS devices with CMOS circuits already processed. AlN and Cr have been etched by inductively coupled plasma (ICP) dry etching using a BCl3–Cl2–Ar plasma chemistry. As part of the novelty of the post-CMOS micromachining process presented here, a silicon Si (1 0 0) wafer has been used as substrate as well as the sacrificial layer used to release the microcantilevers. In order to achieve this, the Si surface underneath the structure has been wet etched using an HNA (hydrofluoric acid + nitric acid + acetic acid) based solution. X-ray diffraction (XRD) characterization indicated the high crystalline quality of the AlN film. An atomic force microscope (AFM) has been used to determine the Cr electrode surface roughness. The morphology of the fabricated devices has been studied by scanning electron microscope (SEM). The cantilevers have been piezoelectrically actuated and their out-of-plane vibration modes were detected by vibrometry.

In vivo analgesic activity and safety assessment of Vitis vinifera L and Punica granatum L fruits extracts

Purpose: To investigate the analgesic properties of fruit extracts of Vitis vinifera (grape) and Punica granatum (pomegranate) in Albino mal mice. Methods: The analgesic activity of fruit extracts of V. vinifera and P. granatum were examined in vivo using thermal stimulus assays (i.e., tail immersion and hot plate) and acetic acid-induced writhing test using acetylsalicylic acid (0.1 g/kg, per os) as standard. The extracts were administered orally in doses of 1.0, 2.0 and 3.0 g/kg. Results: In acetic acid writhes test, both fruit extract pretreatments (1.0, 2.0 and 3.0 g/kg, per os) significantly decreased the number of writhes (p < 0.0001) in a dose-dependent manner compared to control. The Index of Pain Inhibition (IPI) values following V. vinifera extract treatments were 36.52 % (1.0 g/kg), 66.67 % (2.0 g/kg) and 89.71 % (3.0 g/kg) which were significantly different from those for P. granatum extracts (45.39 %, 1.0 g/kg), 70.93 %, 2.0 g/kg) and 86.88 %, 3.0 g/kg) at equivalent doses of 2.0 and 3.0 g/kg of the extracts The fruit extracts of both species increased the reaction latency time. In tail-immersion assay, only the fruit extract of P. granatum significantly increased the response to heat stimulus at doses of 2.0 g/kg (p < 0.05). Conclusion: The hydroalcohol fruit extracts of P. granatum and V. vinifera have potential analgesic effects. Further studies are needed to determine the active component responsible for this effect.

Quality of polyunsaturated fatty acids in Nile tilapias (Oreochromis niloticus) fed with vitamin E supplementation

Freshwater fish are an important source of protein, but they also contain other highly nutritive components such as fats. Polyunsaturated fatty acids (PUFAs) are essential for normal growth, development and reproduction of vertebrates. The antioxidant role of vitamin E in cell membranes prevents fatty acid and cholesterol oxidation, thereby promoting PUFA and subcellular particle stabilization. The effects of vitamin E supplementation on the quality of Nile tilapia (Oreochromis niloticus) carcass were investigated. The experiments were carried out in an experimental laboratory over 106 d. After sex reversal, 400 early juvenile O. niloticus were tested in a completely randomized experiment with 5 treatments (4 repetitions each), consisting of vitamin E monophosphate supplementation at 0, 50, 100, 150 or 200 mg/kg of a base diet. Treatment diets contained equal amounts of protein and energy. Tilapias supplemented with vitamin E contained arachidonic acid (20:4 omega-6; AA) which participates in inflammatory response. Nile tilapia carcasses that received vitamin E at 100 and 150 mg/kg diet had improved carcass quality by increasing the PUFA:SFA ratio and had the highest levels of polyunsaturated fatty acids from the omega-3 (linolenic acid; 18:3 omega-3) and omega-6 (linoleic acid; 18:2 omega-6) series. (C) 2012 Elsevier Ltd. All rights reserved.

PRODUCTION OF BIOFUEL INTERMEDIATES FROM WOODY FEEDSTOCKS VIA FAST PYROLYSIS AND TORREFACTION

The main objective of this research was to investigate pyrolysis and torrefaction of forest biomass species using a micropyrolysis instrument. It was found that 30-45% of the original sample mass remained as bio-char in the pyrolysis temperature range of 500 - 700˚C for aspen, balsam, and switchgrass. The non-char mass was converted to gaseous and vapor products, of which 10-55% was water and syngas, 2-12% to acetic acid, 2-12% to hydroxypropanone, 1-3% to furaldehyde, and 5-15% to various phenolic compounds. In addition, several general trends in the evolution of gaseous species were indentified when woody feedstocks were pyrolyzed. With increasing temperature it was observed that: (1) the volume of gas produced increased, (2) the volume of CO2 decreased and the volumes of CO and CH4 increased, and (3) the rates of gas evolution increased. In the range of torrefaction temperature (200 - 300˚C), two mechanistic models were developed to predict the rates of CO2 and acetic acid product formation. The models fit the general trend of the experimental data well, but suggestions for future improvement were also noted. Finally, it was observed that using torrefaction as a pre-curser to pyrolysis improves the quality of bio-oil over traditional pyrolysis by reducing the acidity through removal of acetic acid, reducing the O/C ratio by removal of some oxygenated species, and removing a portion of the water.