Electrostatic layer-by-layer deposition and electrochemical characterization of thin films composed of MnO(2) nanoparticles in a room-temperature ionic liquid

Thin films of MnO(2) nanoparticles were grown using the layer-by-layer method with poly (diallyldimetylammonium) as the intercalated layer. The film growth was followed by UV-vis, electrochemical quartz crystal microbalance (EQCM), and atomic force microscopy. Linear growth due to electrostatic immobilization of layers was observed up to 30 bilayers, but electrical connectivity was maintained only for 12 MnO(2)/PPDA bilayers. The electrochemical characterization of this film in 1-butyl-2,3-dimethyl-imidazolium (BMMI) bis(trifluoromethanesulfonyl)imide (TFSI) (BMMITFSI) with and without addition of a lithium salt indicated a higher electrochemical response of the nanostructured electrode in the lithium-containing electrolyte. On the basis of EQCM experiments, it was possible to confirm that the charge compensation process is achieved mainly by the TFSI anion at short times (<2 s) and by BMMI and lithium cations at longer times. The fact that large ions like TFSI and BMMI participate in the electroneutrality is attributed to the redox reaction that occurs at the superficial sites and to the high concentration of these species compared to that of lithium cations.

Study of Water-Gas-Shift Reaction over La((1-y))Sr(y)Ni(x)Co((1-x))O(3) Perovskite as Precursors

The performance of La((1-y))Sr(y)Ni(x)Co((1-x))O(3) perovskites for the water gas shift reaction (WGSR) was investigated. The samples were prepared by the co- precipitation method and were performed by the BET method, XRD, TPR, and XPS. The catalytic tests were performed at 300 and 400 A degrees C and H(2)O(v)/CO = 2.3/1 (molar ratio). The sample with the highest surface area is La(0.70)Sr(0.30)NiO(3). The XRD results showed the formation of perovskite structure for all samples, and the La(0.70)Sr(0.30)NiO(3) sample also presented peaks corresponding to La(2)NiO(4) and NiO, indicating that the solubility limit of Sr in the perovskite lattice was surpassed. The replacement of Co by Ni favored the reduction of the species at lower temperatures, and the sample containing Sr presented the highest amount of reducible species, as identified by TPR results. All samples were active, the Sr containing perovskite appearing the most active due to the highest surface area, presence of the La(2)NiO(4) phase, and higher content of Cu in the surface, as detected by XPS. Among the samples containing Co, the most active one was that with x = 0.70 (60% of CO conversion).

Ethanol oxidation reactions using SnO(2)@Pt/C as an electrocatalyst

This paper presents a study on the ethanol oxidation reaction using SnO(2)@Pt/C core-shell structures as electrocatalysts. All the materials used, including Pt/C and PtSn/C E-tek, were 20% (w/w) metal on carbon. The formation of core-shell nanoparticles (SnO(2)@Pt/C) was measured by UV-vis spectrophotometry. X-ray diffraction measurements showed Pt (shell) diffraction patterns without influence from the SnO(2) core and without any shift in 2 theta values for Pt. The diameters of the core-shell particle structures, measured using high-resolution transmission electron microscopy images, were in the range of 3-16 nm. The electrochemical profile for SnO(2)@Pt/C in an acidic medium (H(2)SO(4) at a concentration of 0.5 mol L(-1)) was almost the same as the typical electrochemical behavior for Pt in an acidic medium. Furthermore, the onset potential for the ethanol oxidation reaction using SnO(2)@Pt/C was almost the same as that for PtSn/C E-tek (0.23 V versus the reversible hydrogen electrode). However, the mass current peak densities for ethanol oxidation were 50% higher on SnO(2)@Pt/C than on PtSn/C E-tek. In the polarization curve, the mass current density for ethanol oxidation was higher at all potentials for SnO(2)@Pt/C when compared to Pt/C and PtSn/C E-tek. At 0.5 V, the current mass density for ethanol oxidation on SnO(2)@Pt was 2.3 times of that for the same process on the commercial material. The electrocatalytic activity of SnO(2)@Pt/C for ethanol oxidation was associated with an increase in the electrochemically active surface area. However, an electronic effect should also be considered because the Pt shell changes its electronic structure in the presence of the foreign core. (C) 2010 Elsevier B.V. All rights reserved.

Ethanol oxidation reaction on PtCeO(2)/C electrocatalysts prepared by the polymeric precursor method

This paper presents a study of the electrocatalysis of ethanol oxidation reactions in an acidic medium on Pt-CeO(2)/C (20 wt.% of Pt-CeO(2) on carbon XC-72R), prepared in different mass ratios by the polymeric precursor method. The mass ratios between Pt and CeO(2) (3:1, 2:1, 1:1, 1:2, 1:3) were confirmed by Energy Dispersive X-ray Analysis (EDAX). X-ray diffraction (XRD) structural characterization data shows that the Pt-CeO(2)/C catalysts are composed of nanosized polycrystalline non-alloyed deposits, from which reflections corresponding to the fcc (Pt) and fluorite (CeO(2)) structures were clearly observed. The mean crystallite sizes calculated from XRD data revealed that, independent of the mass ratio, a value close to 3 nm was obtained for the CeO(2) particles. For Pt, the mean crystallite sizes were dependent on the ratio of this metal in the catalysts. Low platinum ratios resulted in small crystallites. and high Pt proportions resulted in larger crystallites. The size distributions of the catalysts particles, determined by XRD, were confirmed by Transmission Electron Microscope (TEM) imaging. Cyclic voltammetry and chronoamperometic experiments were used to evaluate the electrocatalytic performance of the different materials. In all cases, except Pt-CeO(2)/C 1:1, the Pt-Ceo(2)/C catalysts exhibited improved performance when compared with Pt/C. The best result was obtained for the Pt-CeO(2)/C 1:3 catalyst, which gave better results than the Pt-Ru/C (Etek) catalyst. (C) 2009 Elsevier B.V. All rights reserved.

Synthesis and characterization of mono and polymeric cyclopalladated compounds: Crystal and molecular structure of [{Pd(dmba)(ONO(2))}(2)(mu-pz)] center dot H(2)O (pz = pyrazine)

In the treatment of cyclometallated dimer [Pd(dmba)(mu-Cl)](2) (dmba = N,N-dimethylbenzylamine) with AgNO(3) and acetonitrile the result was the monomeric cationic precursor [Pd(dmba)(NCMe)(2)](NO(3)) (NCMe=acetonitrile) (1). Compound 1 reacted with m-nitroaniline (m-NAN) and pirazine (pz), originating [Pd(dmba)(ONO(2))(m-NAN)] (2) and [{Pd(dmba)(ONO(2))}(2)(mu-pz)] center dot H(2)O (3), respectively. These compounds were characterized by elemental analysis, IR and NMR spectroscopy. The IR spectra of (2-3) display typical bands of monodentade O-bonded nitrate groups, whereas the NMR data of 3 are consistent with the presence of bridging pyrazine ligands. The structure of compound 3 was determined by Xray diffraction analysis. This packing consists of a supramolecular chain formed by hydrogen bonding between the water molecule and nitrato ligands of two consecutive [Pd(2)(dmba)(2)(ONO(2))2(mu-pz)] units. (c) 2008 Elsevier Ltd. All rights reserved.

Effects of 15d-PGJ(2)-loaded poly(D,L-lactide-co-glycolide) nanocapsules on inflammation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Purification and characterization of the biological effects of phospholipase A(2) from sea anemone Bunodosoma caissarum

Sea anemones contain a variety of biologically active substances. Bunodosoma caissarum is a sea anemone from the Cnidaria phylum, found only in Brazilian coastal waters. The aim of the present work was to study the biological effects of PLA(2) isolated from the sea anemone B. caissarum on the isolated perfused kidney, the arteriolar mesenteric bed and on insulin secretion. Specimens of B. caissarum were collected from the Sao Vicente Channel on the southern coast of the State of São Paulo, Brazil. Reverse phase HPLC analysis of the crude extract of B. caissarum detected three PLA(2) proteins (named BcPLA(2)1, BCPLA(2)2 and BcPLA(2)3) found to be active in B. caissarum extracts. MALDI-TOF mass spectrometry of BcPLA(2)1 showed one main peak at 14.7 kDa. The N-terminal amino acid sequence of BcPLA(2)1 showed high amino acid sequence identity with PLA(2) group III protein isolated from the Mexican lizard (PA23 HELSU, HELSU, PA22 HELSU) and with the honey bee Apis mellifera (PLA(2) and 1POC_A). In addition, BcPLA(2)1 also showed significant overall homology to bee PLA(2). The enzymatic activity induced by native BCPLA(2)1 (20 mu g/well) was reduced by chemical treatment with p-bromophenacyl bromide (p-BPB) and with morin. BcPLA(2)1 strongly induced insulin secretion in presence of high glucose concentration. In isolated kidney, the PLA(2) from B. caissarum increased the perfusion pressure, renal vascular resistance, urinary flow, glomerular filtration rate, and sodium, potassium and chloride levels of excretion. BcPLA(2)1, however, did not increase the perfusion pressure on the mesenteric vascular bed. In conclusion, PLA(2), a group III phospholipase isolated from the sea anemone B. caissarum, exerted effects on renal function and induced insulin secretion in conditions of high glucose concentration. (C) 2009 Elsevier Ltd. All rights reserved.

3,5-Dimethyl-1-thiocarbamoylpyrazole and its Pd(II) complexes: Synthesis, spectral studies and antitumor activity

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Synthesis and characterization of mono and polymeric cyclopalladated compounds: Crystal and molecular structure of [{Pd(dmba)(ONO2)}(2)(mu-pz)] center dot H2O (pz = pyrazine)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

4-Fluoro-2-methoxyphenol, an apocynin analog with enhanced inhibitory effect on leukocyte oxidant production and phagocytosis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A new spin-2 self-dual model in D=2+1

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Duality of parity doublets of helicity +/- 2 in D=2+1 dimensions

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Voltammetric Behavior of a Modified Electrode With Azide Copper Octa(3-Aminopropyl)Octasilsesquioxane Composite in the Oxidation of Ascorbic Acid

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Contribuição da glicemia pós-desjejum para o controle glicêmico do paciente com diabetes melito tipo 2

Estudos epidemiológicos observaram que glicemias pós-prandiais (GPPs) elevadas são fator principal na ocorrência de doenças cardiovasculares. Sabe-se que a hemoglobina glicada (HbA1C) reflete a glicemia média dos últimos 2-3 meses, entretanto é controversa a contribuição relativa da glicemia de jejum (GJ) e GPP para o valor da HbA1C. OBJETIVO: Avaliar a contribuição da GJ e GPPs para o valor da HbA1C em pacientes com diabetes melito tipo 2 (DM2). MÉTODOS: Participaram 53 indivíduos com DM2, estáveis e em tratamento com antidiabéticos orais (n= 27) e/ou insulina (n= 26). Cada paciente comparecia a 3 visitas a intervalos de 2 meses. em cada visita era medida a GJ, as GPPs (2h pós-desjejum: GPD e pós-almoço: GPA) e a HbA1C, sendo fornecido o desjejum e o almoço segundo seus hábitos alimentares. Mediu-se a glicose plasmática pela glicose-oxidase e a HbA1C, pela cromatografia de troca iônica. Realizou-se a análise das associações pelo coeficiente de correlação de Spearman, com P< 0,05. RESULTADOS: A HbA1C correlacionou-se melhor em cada visita ao longo do estudo com a GPD (r: 0,66­0,48), a glicemia média (r: 0,64­0,41), a área abaixo da curva glicêmica (r : 0,64­0,46) e a GPP média (r: 0,59­0,41). CONCLUSÕES: A GPD mostrou-se um parâmetro eficaz adicional no monitoramento glicêmico dos pacientes com DM2.