茄科天仙子族：结构、分化和系统关系

本文研究了茄科天仙子族7属以及有亲缘关系的颠茄属、茄参属和枸杞属的形态学、解剖学、孢粉学、种子形态学、胚胎学、花器官发生、分子系统学和分支系统学;论述了它们的结构、分化和系统关系。主要内容包括： 1．解剖学 在光学显微镜和扫描电镜下，观察了茄科天仙子族(Hyoscyameae)7属21种及邻近4属4种共25种植物的叶表皮特征，结果表明：气孔器在各种植物的上、下的表皮均有分布，多为无规则型，也有不等细胞型;叶表皮细胞形状有不规则形、十字形、近长圆形和不规则多边形，垂周壁较平直或各种波状。叶表皮气孔器外拱盖内缘近平滑、浅波状或波状;角质膜多为具条纹，也有同时具条纹和颗粒或鳞片，偶尔仅具颗粒和鳞片或光滑。气孔器类型可以作为区分部分属的依据之一。颠茄叶表皮细胞形状和垂周壁式样在一些属和种中有一定的规律性，并与外部形态、孢粉学性状或地理分布相关;叶片表面角质膜的特征对属和种的划分也有一定意义。 2．种子形态学 在扫描电子显微镜下首次全面研究了天仙子族及颠茄属和茄参属等共10属25种植物的种子形态学特征，结果表明： 该族植物种子表面纹饰有脑纹状或近脑纹状和网状两大类，除了山莨菪属Anisodus和Hyoscyamus.pusillus 外，其余类群均为网状。外种皮细胞形状和周壁式样有两大类，一类为多边形至近圆形，等径，周壁近平直，另一类为形状不规则，常不等径，周壁为各式波状;外种皮细胞周壁内侧有皱波状、瘤状、小颗粒、片状或小刺等各式附属物。各属植物的种子大小、形状及种脐着生位置的系统学意义不大。但是，种脐突出与否、种子外种皮细胞形状和周壁式样，尤其是周壁内侧附属物等性状具有较大的分类学意义。 3．孢粉学 在扫描电镜下研究了该族7属及其它3属共10属23种植物的花粉形态学特征。结果表明：天仙子族的花粉粒形状为球形、近球形、扁球形和长球形;萌发孔类型有无萌发孔、不规则的拟孔、3沟、4 沟、3- 4沟、散沟和3孔沟;外壁纹饰为小刺状、瘤状、各式条纹状、条纹-穴状、条纹-网状、皱波状、细网状和网状。沟膜近光滑、具小颗粒、具小刺状突起或具瘤状突起。各属植物的花粉形态在萌发孔的有无、萌发孔的类型和外壁纹饰等方面有较大的差异，可以作为探讨属间分类和系统关系的重要依据。天仙子族植物花粉萌发孔的演化趋势为：无萌发孔→ 3、4沟→3孔沟。无萌发孔的山莨菪属是原始类群，三孔沟的马尿泡和天仙子等属是进化类群。 4．胚胎学 本论文首次研究了天仙子族山莨菪Anisodus tanguticus的胚胎学特征，结果表明：山莨菪的小孢子形成为同时型，腺质绒毡层;胚珠半倒生，单珠被，薄珠心;蓼型胚囊;其胚胎发生类型可能为茄型;胚乳形成为细胞型。山莨菪的胚胎学性状与马尿泡十分相似。胚胎学证据支持山莨菪属与马尿泡属关系密切的观点。 5．花器官发生 首次全面研究了天仙子族的山莨菪属（山莨菪）、马尿泡属（马尿泡）、天仙子属（天仙子）及其邻近2属共5种植物的花器官发生特征，结果表明：山莨菪和天仙子的5个花萼裂片原基突起最早发生，且几乎是近同时环状发生，其排列方式从花发育早期直至花成熟后始终为轮状排列。而马尿泡和颠茄首先是5个花萼裂片原基突起依次螺旋状发生，但在其5个花萼裂片原基都出现后，其排列方式仍为轮状排列。不同之处是：马尿泡的花萼裂片原基在其花冠裂片原基刚刚不明显地发生时，就已经在基部联合并形成了一个环，而颠茄的花萼裂片原基直到雄蕊原基突起开始发生并较明显时，花萼裂片原基仍然是分离的，当花顶的中央开始出现很不明显的雌蕊原基的凹陷时，花萼裂片原基才开始联合。青海茄参与其它4种植物的不同之处在于柱头2裂或3裂，而后4者的柱头均为2裂。花器官发生的特征表明马尿泡与天仙子和山莨菪的关系较近。 6．基于叶绿体DNA trnL-F序列和核糖体DNA ITS序列的初步分析 以宁夏枸杞作为外类群，对代表天仙子族及其邻近3属的10种植物的ITS区和trnL-F序列进行了测定，将这两个序列结合构建系统树。将gaps作为fifth base处理时，马尿泡属和茄参属构成最基部的一支，赛莨菪属和天仙子属构成一支然后与泡囊草属构成姐妹群，另外一支由天蓬子属、颠茄属和山莨菪属组成，其中天蓬子属与颠茄属构成一支后与山莨菪属构成姐妹群。分子证据只是一个尝试，还不足以说明天仙子族各属的系统关系。 7．分支分析 以枸杞属为外类群，基于形态学、叶表皮、种子形态学、孢粉学等特征对天仙子族7属及颠茄属和茄参属进行了分支分析。结果表明：目前公认的天仙子族7属构成一个单系类群，而颠茄属和茄参属并没有包括在内，它们两者构成一支，并与天仙子族形成姐妹群的关系。这与该族传统的分类结果相一致。 8．天仙子族的分化和系统关系 基于上述研究结果，结合天仙子族各属的现代地理分布，讨论了各属的分化和系统关系。认为根据传统分类包括有7个属的天仙子族是一个自然的单系类群，目前还没有足够的证据说明是否应该将颠茄属和茄参属放在天仙子族中。

Coastal climate reflected in carbon-13/carbon-12 ratio of organic carbon in varved sediment from Santa Barbara basin

A 1844-1987 time-series of carbon stable isotope ratios from dated sedimentary total organic carbon from the center of the Santa Barbara basin is compared with historical climate and oceanographic records. Carbon derived from carbon-13-depleted phytoplankton and carbon-13-enriched kelp appear responsible for a large part of the isotopic variance in sedimentary total organic carbon. El Niño/Southern Oscillation events are recorded by the isotopic response of marine organic carbon in sediments.

Polyculture of freshwater prawn, Macrobrachium rosenbergii, de Man with carps: effects of prawn stocking density

Effects of three stocking densities, viz., 35, 50 and 65/decimal (1 decimal = 40.48 m2) of juvenile freshwater prawn (Macrobrachium rosenbergii) on prawn and fish production were tested in a polycuture system with silver carp (Hypophthalmichthys molitrix), catla (Catla catla), Grass carp (Ctenophmyngodon idella) and silver barb (Barbodes gonionotus). The fish stocking density was 19/decimal with the species combination of silver carp-10, catlac-6, grass carp-1 and silver barb-2. In a 8-month culture period, the prawn yield 423 ± 144 kg/ha was significantly lower (P< 0.5) with the prawn stocking density of 35/decimal than that of 548 ± 178 kg/ha and 662 ± 243 kg/ha with 50 and 65/decimal respectively. The fish production (1844-1891 kg/ha) did not differ significantly (p <0.05) among the three treatments indicating that prawn stocking densities had no influence on fish yield. The lower mean harvest weight (62 g) and survival rate (67 g) and higher yield (2.67 kg/decimal) with the highest stocking rate of prawn reveals that as density was increased, prawn survival and individual weight at harvest decreased but total yield increased.

6-环己甲基取代S-DABO类化合物、其合成方法和用途

6-环己甲基取代S-DABO类化合物、其合成方法和用途，属药物技术领域。本发明涉及一种5-烷基-6-环己甲基-2-(烷基、环烷基、环烷基甲基、取代苯乙酮)硫尿嘧啶类化合物，该类化合物具有如(Ⅰ)通式：其中： R1为C1-3的烷基； R2＝C1-8的烷基、环烷基、环烷基甲基，如(Ⅱ)式：(其中，X＝OCH3，H， OH，卤素)。分别以氯甲基环己烷或环己基乙酸为原料制备β-酮酯，再与硫脲在醇钠催化下缩合关环制得关键中间体5-烷基-6-环己甲基硫尿嘧啶，最后通过S-烷基化反应引入C2-位侧链制备目标分子，合成方法简便易行，产物具有极其显著的抗HIV病毒活性和抗耐药性，可作为抗HIV药物候选物。

芬克罗酮的应用

本发明涉及芬克罗酮的应用，具体是作为制备治疗抑郁症药物的应用，属药物应用技术领域。本发明选用大鼠和小鼠两种实验动物，DRL72-s和MFST两种模型，经口灌服或腹腔注射两种给药方式，使用不同剂量芬克罗酮，结果发现该药物具有明显的抗抑郁效果，其作用和丙米嗪的作用相当，但芬克罗酮的毒副作用较小，因此可作为制备治疗抑郁症药物的应用。

Ecological limits of high-density milkfish farming

In the Philippines at present, milkfish farming in ponds includes a wide range of intensities, systems and practices. To make aquaculture possible, ecosystems are used as sources of energy and resources and as sinks for wastes. The growth of aquaculture is limited by the life-support functions of the ecosystem, and sustainability depends on matching the farming techniques with the processes and functions of the ecosystems, for example, by recycling some degraded resources. The fish farm has many interactions with the external environment. Serious environmental problems may be avoided if high-intensity farms are properly planned in the first place, at the farm level and at the level of the coastal zone where it can be integrated with other uses by other sectors. It is believed that the key to immediate success in the mass production of milkfish for local consumption and for export of value-added forms may be in semi-intensive farming at target yields of 3 tons per ha per year, double the current national average. Intensive milkfish farming will be limited by environmental, resource and market constraints. Integrated intensive farming systems are the appropriate long-term response to the triple needs of the next century: more food, more income, and more jobs for more people, all from less land, less resources, and less non-renewable energy.

Progress towards the design and numerical analysis of a 3D microchannel biochip separator

This paper reports the design and numerical analysis of a three-dimensional biochip plasma blood separator using computational fluid dynamics techniques. Based on the initial configuration of a two-dimensional (2D) separator, five three-dimensional (3D) microchannel biochip designs are categorically developed through axial and plenary symmetrical expansions. These include the geometric variations of three types of the branch side channels (circular, rectangular, disc) and two types of the main channel (solid and concentric). Ignoring the initial transient behaviour and assuming that steady-state flow has been established, the behaviour of the blood fluid in the devices is algebraically analysed and numerically modelled. The roles of the relevant microchannel mechanisms, i.e. bifurcation, constriction and bending channel, on promoting the separation process are analysed based on modelling results. The differences among the different 3D implementations are compared and discussed. The advantages of 3D over 2D separator in increasing separation volume and effectively depleting cell-free layer fluid from the whole cross section circumference are addressed and illustrated. © 2011 John Wiley & Sons, Ltd.

中国连珠藻属(串珠藻科)的分类研究

记述了中国产连珠藻属SirodotiaKylin的6个种,即黄山连珠藻S.huangshanensisZ.X.ShietS.L.Xie,威拉连珠藻S.huillensis(WelwitschexW.etG.S.West)Skuja,中华连珠藻S.sinicaJao,纤细连珠藻S.delicatulaSkuja,瑞典连珠藻S.suecicaKylin和细连珠藻S.tenuissima(Collins)SkujaexFlint。其中,黄山连珠藻S.huangshanensisZ.X.ShietS.L.Xie为

Multiwall nanotubes, multilayers, and hybrid nanostructures: new frontiers for technology and Raman spectroscopy.

Technological progress is determined, to a great extent, by developments in material science. Breakthroughs can happen when a new type of material or new combinations of known materials with different dimensionality and functionality are created. Multilayered structures, being planar or concentric, are now emerging as major players at the forefront of research. Raman spectroscopy is a well-established characterization technique for carbon nanomaterials and is being developed for layered materials. In this issue of ACS Nano, Hirschmann et al. investigate triple-wall carbon nanotubes via resonant Raman spectroscopy, showing how a wealth of information can be derived about these complex structures. The next challenge is to tackle hybrid heterostructures, consisting of different planar or concentric materials, arranged "on demand" to achieve targeted properties.

Evaluation of the p-y method in the design of monopiles for offshore wind turbines

Monopile foundations, currently designed using the p-y method, are technically viable in supporting larger offshore wind turbines in waters to a depth of 30 m. The p-y method was developed to better understand the behavior of laterally loaded long slender piles required for the offshore oil and gas installations. The lateral load-deformation behavior of two monopiles, 5 and 7.5 m dia, installed in soft clays of varying undrained shear strength and stiffness, was studied. A combination of axial and lateral loads expected at an offshore wind farm location with a water depth of 30 m was used in the analysis. It was established that the Matlock (1970) p-y curves are too soft and under-estimate the ultimate soil reaction at all depths except at the monopile tip. At the pile tip, the base shear was not accounted for in the p-y curves, hence resulting in the over-estimation of the soil reaction. Consequently, the Matlock (1970) p-y formulation significantly underestimates the monopile ultimate lateral capacity. The use of the Matlock (1970) p-y method would result in over-conservative designs of monopiles for offshore wind turbines. This is an abstract of a paper presented at the Offshore Technology Conference (Houston, TX 5/6-9/2013).

黑龙江流域鳊鱼的种内变异及其生活习性

<正> 鳊鱼是很名贵的经济鱼类,亦称(鱼边)角,东北地区称鳊花。在我国的江河中分布很广,长江及松花江流域中最为丰盛。这种鱼最初的记载是在1844年,学名为Leuciscus bramula,是Cuvier和Valencienes两氏订立的。后来在1846及1855年中,Richardson和Basilewsky两氏又先后记述了这种鱼类;并分别订为Abramis bramula和Abramis pekinensis。到1865年,Bleeker氏才确定这种鱼的属名为Parabramis,借以和只有一行咽喉齿

Physical properties of a hybrid and a nanohybrid dental light-cured resin composite.

This work was aimed at the study of some physical properties of two current light-cured dental resin composites, Rok (hybrid) and Ice (nanohydrid). As filler they both contain strontium aluminosilicate particles, however, with different size distribution, 40 nm-2.5 mum for Rok and 10 nm-1 mum for Ice. The resin matrix of Rok consists of UDMA, that of Ice of UDMA, Bis-EMA and TEGDMA. Degree of conversion was determined by FT-IR analysis. The flexural strength and modulus were measured using a three-point bending set-up according to the ISO-4049 specification. Sorption, solubility and volumetric change were measured after storage of composites in water or ethanol/water (75 vol%) for 1 day, 7 or 30 days. Thermogravimetric analysis was performed in air and nitrogen atmosphere from 30 to 700 degrees C. Surface roughness and morphology of the composites was studied by atomic force microscopy (AFM). The degree of conversion was found to be 56.9% for Rok and 61.0% for Ice. The flexural strength of Rok does not significantly differ from that of Ice, while the flexural modulus of Rok is higher than that of Ice. The flexural strengths of Rok and Ice did not show any significant change after immersion in water or ethanol solution for 30 days. The flexural modulus of Rok and Ice did not show any significant change either after immersion in water for 30 days, while it decreased significantly, even after 1 day immersion, in ethanol solution. Ice sorbed a higher amount of water and ethanol solution than Rok and showed a higher volume increase. Thermogravimetric analysis showed that Rok contains about 80 wt% inorganic filler and Ice about 75 wt%.