Characterization and properties of elephant grass ashes as supplementary cementing material in pozzolan/Ca(OH)(2) pastes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Prospection of genomic regions divergently selected in racing line of Quarter Horses in relation to cutting line

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

LIMING AND POTASSIUM FERTILIZATION FOR TIFTON 85 GRASS

Despite the high nutritional requirements of Tifton 85 grass, often the importance of liming and potassium fertilization for this forage has been neglected. In order to evaluate the effects of such practices on shoots dry matter and tillering of this forage, was carried out an experiment in green-house conditions, by two cuts, using samples of an Oxisol medium texture and a sandy soil. Efforts were also made to determine parameters to support recommendations for liming and potassium fertilization. Was adopted the completely randomized design with four replications in a factorial scheme 4x4x2, with four K rates (0, 60, 120 and 180 mg kg(-1) K), four pH values (original, 4.9, 5.9 and 6.4) and two soils. Potassium fertilization and liming promoted a significant increase in shoot dry matter and tillering in Tifton 85 grass, in both soils and cuts. The highest yields of shoot dry matter were associated with a base saturation of 56% and pH 5.2. The critical levels of K in soil and plant were 1.7 mmol dm(-3) and 14.0 g kg(-1), respectively.

TANZANIA GRASS STRUCTURE GRAZED BY GOATS MANAGED WITH DIFFERENT RESIDUAL LEAF AREA INDEX UNDER INTERMITTENT STOCKING

The objective of this study was to evaluate the structure of Tanzania grassland grazed by goats managed with different residue leaf area index (RLAI) under intermittent stocking. The experiment was carried out from February to August, 2008. The treatments consisted of three different targets RLAI (0.8, 1.6 and 2.4) and 95% light interception (LI) criterion determined the rest period. Forage samples were collected at average height sampling points and weighed. Subsequently, a smaller sample was removed to separate the morphological components (leaf, stem and dead material) and to determine the structural and productive features. The canopy architecture was evaluated by the method of inclined point quadrat. The pre-grazing height in the paddocks were significantly different among treatments. RLAI influenced dry matter contents of green forage, leaf, stem and total, with the exception of dry matter of dead material, where the lowest values were observed for 0.8 RLAI. Thus, RLAI modifies canopy structure and is sensitive to canopy height changes throughout the year. Pasture regrowth is not compromised by residual leaf area indexes between 0.8 and 2.4, when climatic factors are not limiting.

Estudo de compósitos de madeira com reforço em bambu para utilização em mobiliário

Bamboo has been studied because of its peculiar mechanical properties and numerous possibilities of use, besides being a fast-growing grass and short cutting cycle. This study aimed to analyze the mechanical characteristics of wood-bamboo composite material, where the samples were developed from the combination of layers of bamboo as a structural reinforcement in solid pieces of pine and EGP panel parts. The species of wood used was Pinus taeda, and the bamboo species Guadua angustifolia and Dendrocalamus giganteus. All work was conducted at the Universidade Estadual Paulista - UNESP in the laboratory of Physical and Mechanical Properties of Wood. Tests including the density and tension parallel to grain of the bamboo species used and the static bending of composites in order to use this in the furniture industry. For the tests have been used as a basis the requirements of the normative document NBR 7190/97. The values obtained in the tests showed a significant increase in strength and stiffness compared to unreinforced parts, where there was an increase in MOE and MOR in static bending in all specimens used in evidence. The results showed the possibility of reducing sections in furniture components and the possibility of improving the mechanical properties of parts with defects found in wood of Pinus Itapeva region of São Paulo

Integrated cutting machine programming and lot sizing in furniture industry

In this paper a mathematical model that combines lot-sizing and cutting-stock problems applied to the furniture industry is presented. The model considers the usual decisions of the lot sizing problems, as well as operational decisions related to the cutting machine programming. Two sets of a priori generated cutting patterns are used, industry cutting patterns and a class of n-group cutting patterns. A strategy to improve the utilization of the cutting machine is also tested. An optimization package was used to solve the model and the computational results, using real data from a furniture factory, show that a small subset of n-group cutting patterns provides good results and that the cutting machine utilization can be improved by the proposed strategy.

Marandu grass management and supplementation on performance and methane mitigation of Nellore bulls

Pós-graduação em Zootecnia - FCAV

Cutting Ability of Nickel-titanium rotary systems protaper, mtwo and k3

Nickel-titanium rotatory systems should remove dentin during the root canal preparation to promote the enlargement and tapered shape with continuously narrowing towards the apex. Objective: The aim of this study was to analyze the cutting ability of three NiTi rotatory systems (n = 12): ProTaper (group 1), Mtwo (group 2), and K3 (group 3). Material and methods: Thirty six maxillary molar teeth were weighted on an analytical balance before and after the rotatory preparation of the mesio-buccal root canal. Data was statistically analyzed by ANOVA and Tukey s test with a significance level of 5%. Results: The results revealed the following mass differences (g) before and after the root canal preparation: ProTaper (group 1 – 0.0159 ± 0.004), Mtwo (group 2 – 0.0125 ± 0.002), and K3 (group 3 – 0.007 ± 0.003). Conclusion: ProTaper showed the highest cutting ability among the three tested nickel-titanium rotatory systems followed by Mtwo and K3.

Human teeth versus bovine teeth: cutting effectiviness of diamond burs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Leaf-cutter ant fungus gardens are biphasic mixed microbial bioreactors that convert plant biomass to polyols with biotechnological applications

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

How can an invasive grass affect fire behavior in a tropical savanna? A community and individual plant level approach

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Morphogenic parameters and productivity of grass-Pioneer subjected to nitrogen

Objective of this work by evaluating the effect of nitrogen on forage yield and morphogenesis of elephant grass cv. Pioneer. The experimental design was randomized blocks with five replications, totaling 20 experimental units. Treatments consisted of four nitrogen levels (100, 200, 300 and 400 kg ha(-1) yr(-1)). The experiment was conducted under irrigated conditions. Evaluative cuts were made at 50 cm soil with values of light interception (95%) without pre-defined intervals. It was observed that N fertilization increased significantly (P<0.05) the production of dry matter per hectare, leaf appearance rate (leaves days(-1)tiller(-1)), leaf elongation rate (cm tiller(-1) day(-1)) and stem elongation rate (cm day(-1)). The process of this forage senescence is accelerated with increasing doses of nitrogen and leaf appearance rate, thereby reducing the phyllochron. It required a study on the economic viability of higher doses of nitrogen in grazed elephant grass cv. Pioneer.

Prospection of genomic regions divergently selected in cutting line of quarter horses in relation to racing line

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Developmental Morphology of a Dimorphic Grass Inflorescence: The Brazilian Bamboo Eremitis (Poaceae)

Premise of research.The highly specialized grass inflorescence varies with respect to phyllotaxis, with the reproductive meristem forming primary lateral branches that are either spirally arranged or distichous. The Brazilian bamboo Eremitis is highly unusual in that it has a dimorphic inflorescence, typically composed of an apical gynecandrous whorl of both male and female spikelets and basal whorls of male spikelets. Although not closely related to them, Eremitis shares some structural similarities with some early-divergent grasses.Methodology.We use SEM and LM to describe the development of the reproductive structures of Eremitis to clarify our understanding of the highly specialized grass inflorescence and flower.Pivotal results.Developmental studies show that the inflorescence of Eremitis is actually partially whorled and partially distichous. The apical whorl is abortive. The female spikelet is not terminal on the axis, in contrast with the majority of grasses. All the male spikelets are distichously attached to the inflorescence axis and separated into groups. There is a hollow style with two vascular bundles.Conclusions.The strong morphological similarities between Eremitis and some early-divergent grasses are here supplemented by several anatomical similarities, perhaps due to a shared pollination syndrome.