Design of a training tool for improving the use of hand-held detectors in humanitarian demining

Purpose – The purpose of this paper is to introduce the design of a training tool intended to improve deminers' technique during close-in detection tasks. Design/methodology/approach – Following an introduction that highlights the impact of mines and improvised explosive devices (IEDs), and the importance of training for enhancing the safety and the efficiency of the deminers, this paper considers the utilization of a sensory tracking system to study the skill of the hand-held detector expert operators. With the compiled information, some critical performance variables can be extracted, assessed, and quantified, so that they can be used afterwards as reference values for the training task. In a second stage, the sensory tracking system is used for analysing the trainee skills. The experimentation phase aims to test the effectiveness of the elements that compose the sensory system to track the hand-held detector during the training sessions. Findings – The proposed training tool will be able to evaluate the deminers' efficiency during the scanning tasks and will provide important information for improving their competences. Originality/value – This paper highlights the need of introducing emerging technologies for enhancing the current training techniques for deminers and proposes a sensory tracking system that can be successfully utilised for evaluating trainees' performance with hand-held detectors.

Contribución al estudio de sistemas de hipertermia óptica y su aplicación en muestras biológicas

Las nanopartículas de metales nobles (especialmente las de oro) tienen un gran potencial asociado al desarrollo de sistemas de terapia contra el cáncer debido principalmente a sus propiedades ópticas, ya que cuando son irradiadas con un haz de luz sintonizado en longitud de onda con su máximo de Resonancia de Plasmón Superficial, absorben de manera muy eficiente dicha luz y la disipan rápidamente al medio en forma de calor localizado. Esta característica por tanto, puede ser aprovechada para conseguir elevar la temperatura de células tumorales hasta sobrepasar umbrales a partir de los cuales se produciría la muerte celular. Partiendo de estos principios, esta tesis se centra en el desarrollo y la caracterización de una serie de prototipos de hipertermia óptica basados en la irradiación de nanopartículas de oro con un haz de luz adecuado, así como en la aplicación in vitro de la terapia sobre células cancerígenas. Además, el trabajo se orienta a identificar y comprender los procesos mecánicos y térmicos asociados a este tipo de hipertermia, y a desarrollar modelos que los describan, estudiando y planteando nuevas formas de irradiación, para, en última instancia, poder optimizar los procesos descritos y hacerlos más efectivos. Los resultados obtenidos indican que, el uso de nanopartículas de oro, y más concretamente de nanorods de oro, para llevar a cabo terapias de hipertermia óptica, permite desarrollar terapias muy efectivas para inducir muerte en células cancerígenas, especialmente en tumores superficiales, o como complemento quirúrgico en tumores internos. Sin embargo, los efectos de la toxicidad de las nanopartículas de oro, aún deben ser detalladamente estudiados, ya que este tipo de terapias sólo será viable si se consigue una completa biocompatibilidad. Por otro lado, el estudio exhaustivo de los procesos térmicos que tienen lugar durante la irradiación de las nanopartículas ha dado lugar a una serie de modelos que permiten determinar la efectividad fototérmica de las nanopartículas y además, visualizar la evolución de la temperatura tanto a escala nanométrica como a escala macrométrica, en función de los parámetros ópticos y térmicos del sistema. El planteamiento de nuevas formas de irradiación y el desarrollo de dispositivos orientados a estudiar los fenómenos mecánicos que tienen lugar durante la irradiación pulsada de baja frecuencia y baja potencia de nanopartículas de oro, ha dado lugar a la detección de ondas de presión asociadas a procesos de expansión termoelástica, abriendo la puerta al desarrollo de terapias de hipertermia que combinen la muerte celular producida por calentamiento con la muerte derivada de los fenómenos mecánicos descritos.VII Noble metal nanoparticles (especially gold ones), have a huge potential in the development of therapy systems against cancer mainly due to their optical properties, so that, when these particles are irradiated with a light that is syntonized in wavelength with their maximum of Surface Plasmon Resonance, they effectively absorb and dissipate the light to the surrounding medium as localized heat. We can take advantage of this characteristic for rising the temperature of cancer cells above the threshold at which cellular death would occur. From these principles, this thesis is oriented to the development and characterization of a series of optical hyperthermia prototypes based on the irradiation of gold nanoparticles using the suitable light, and on the in vitro application of this therapy over cancer cells, to understand the mechanical and thermal processes associated with this kind of hyperthermia, developing descriptive models, and to study and to approach new ways of irradiation in order to, ultimately, optimize the described processes and make them more effective. The obtained results show that, the use of gold nanoparticles, and more specifically, of gold nanorods, to carry out optical hyperthermia therapies, allows the development of very effective therapies in order to induce death in VIII cancer cells, especially in superficial tumors, or like surgical complement in more internal tumors. However, the toxicity effects of the gold nanoparticles still need to be studied more detail, because this kind of therapies will be feasible only if a complete biocompatibility is achieved. On the other hand, the exhaustive study of the thermal processes that take place during the irradiation of the nanoparticles resulted in a series of models that allow the determination of the photothermal efficiency of the nanoparticles and also the visualization of the temperature evolution, both at nanoscale and at macroscale, as a function of the optical and thermal parameters of the system. The proposal of new ways of irradiation and the development of devices oriented to study the mechanical effects that take place during the low frequency and low power pulsing irradiation of gold nanoparticles has led to the detection of pressure waves associated to thermoelastic expansion processes, opening the door to the development of hyperthermia therapies that combine the cellular death due to the heating with the death derived from the described mechanical phenomena.

Custodia del territorio minero español

El concepto de custodia del territorio sigue siendo desconocido para los defensores del patrimonio minero de nuestro país. La custodia del territorio es una estrategia más para conservar los valores naturales, culturales y paisajísticos de una zona determinada. Para conseguir la implicación de los propietarios, las entidades de custodia emplean distintas estrategias e instrumentos con el objetivo de pactar, de forma voluntaria, un acuerdo entre las dos partes. Cuando se habla de la custodia como estrategia, hay que pensar en herramientas y métodos para acceder a la propiedad del patrimonio o para que los propietarios, sin dejar de serlo, se involucren en la conservación. Los encargados de las acciones requeridas, los agentes que protagonizan las acciones de conservación son las denominadas entidades de custodia. Actualmente hay innumerables entidades de custodia en todo el Mundo, que se dedican al patrimonio natural o cultural, pero que se dediquen específicamente a la protección del patrimonio minero son más escasas. Sin embargo la Sociedad Española para la Defensa del Patrimonio Geológico y Minero es, de hecho, una entidad de custodia, en muchos casos sin que sus socios seamos conscientes de ello. En el presente trabajo se intenta definir el concepto de custodia del patrimonio, aplicándolo al caso concreto del patrimonio minero, y se estudian distintos ejemplos de iniciativas para adquirir bienes inmuebles con el fin de preservar un patrimonio minero que estaba en peligro de desaparición. ABSTRACT The concept of land stewardship remains unknown to the defenders of our country’s mining heritage. Land stewardship is a strategy to conserve the natural, cultural and landscape values of a particular area. To encourage the involvement of the owners, the custodians employ different strategies and tools with the aim of reaching, on a voluntary basis, an agreement between the two parties. When it comes to custody as a strategy, you have to come up with tools and methods to achieve the ownership of the property or to encourage the owners to be involved in its conservation. Those responsible for the actions required, the agents who lead conservation actions are known as Custody institutions. Currently there are innumerable custodians around the world, dedicated to natural or cultural heritage, but those specifically engaged in the protection of mining heritage are scarce. However, the Spanish Society for the Defence of the Geological and Mining Heritage is actually an entity of Custody, in many cases without its partners being aware of this fact. This paper attempts to define the concept of guardianship of a property, applied to the case of mining heritage, and explores different examples of Spanish entities that employ initiatives to acquire property for the purpose of preserving mining heritage in danger disappearing

INFOBIOMED: European Network of Excellence on Biomedical Informatics to support individualised healthcare

INFOBIOMED is an European Network of Excellence (NoE) funded by the Information Society Directorate-General of the European Commission (EC). A consortium of European organizations from ten different countries is involved within the network. Four pilots, all related to linking clinical and genomic information, are being carried out. From an informatics perspective, various challenges, related to data integration and mining, are included.

Gasification technology assessment of sterile coal to clean electrical power generation.

Sterile coal is a low-value residue associated to the coal extraction and mining activity. According to the type and origin of the coal bed configuration, sterile coal production can mainly vary on quantity, calorific value and presence of sulphur compounds. In addition, the potential availability of sterile coal within Spain is apparently high and its contribution to the local power generation would be of interest playing a significant role. The proposed study evaluates the availability and deployment of gasification technologies to drive clean electricity generation from waste coal and sterile rock coal, incorporating greenhouse gas emission mitigation systems, like CO2, H2S and NOx removal systems. It establishes the target facility and its conceptual basic design proposal. The syngas obtained after the gasification of sterile coal is processed through specific conditioning units before entering into the combustion chamber of a gas turbine. Flue gas leaving the gas turbine is ducted to a heat recovery steam generation boiler; the steam produced within the boilerdrives a steam turbine. The target facility resembles a singular Integrated Gasification in Combined Cycle (IGCC) power station. The evaluation of the conceptual basic design according to the power output set for a maximum sterile contribution, established that rates over 95% H2S and 90% CO2 removal can be achieved. Noticeable decrease of NOx compounds can be also achieved by the use of commercial technology. A techno-economic approach of the conceptual basic design is made evaluating the integration of potential unitsand their implementation within the target facility aiming toachieve clean power generation. The criterion to be compliant with the most restrictive regulation regarding environmental emissions is setting to carry out this analysis.

Bilingual Polytechnic Dictionary of Metaphors: Spanish to English

This paper provides an overview of an ongoing research project work: “A Polytechnical Bilingual Dictionary of Metaphors: Spanish-English/English-Spanish” done by the UPM consolidated research group “DISCYT” (Estudios Cognitivos del Discurso Científico-Técnico). A detailed explanation of the method adopted to identify key metaphors collected from the different subject areas is included. Drawing from recognized empirical methods (Pragglejaz 2007, Cameron 2007, Steen 2007), the examples have been examined according to the main tenets of conceptual metaphor and conceptual integration theory (Deignan 2005, Gibbs 2008, Lakoff 1993, Lakoff & Johnson 1999, Steen 2007, Fauconnier & Turner 2008). This forthcoming dictionary comprises metaphors of over 10 scientific and technical areas such as Aeronautical engineering, Agronomy, Architecture, Biotechnology, Civil engineering, Geology and Mining, Mechanical engineering, Nanotechnology, Naval and Maritime engineering, Sports and Telecommunications. In this paper, we focus on the study of examples taken from civil engineering, materials engineering and naval engineering. Representative cases are analyzed from several points of view (multimodal metaphor, linguistic information strategies and translation into target language) highlighting cross linguistic variations between Spanish and English.

Modelo explicativo de la relación entre productividad y valores organizacionales, en la PYME del sector metalúrgico y minero de Venezuela

Como consecuencia de los procesos de globalización el mundo empresarial está sometido a constantes cambios que han originado la necesidad en las empresas de evaluar su funcionamiento, con el objeto de adecuar su gestión a las mejores prácticas gerenciales y operativas, en función de adaptarse a las exigencias presentes en los escenarios en que están inmersas. La presente investigación tiene como propósito desarrollar un modelo explicativo de la relación entre la productividad y los valores organizacionales, teniendo como premisa los distintos planteamientos o teorías que destacan la importancia que tienen los valores organizacionales para que las empresas logren sus metas. Específicamente se tomó como referencia la clasificación de los valores organizacionales, que contempla el modelo de gestión de Dirección por Valores (DPV), de García y Dolan (2001). Las PYMES, al considerar el efecto que tienen los valores organizacionales en la productividad, pueden apoyar su gestión a través del compromiso de las personas para lograr los resultados de productividad que quieren o necesitan alcanzar. El abordaje del estudio se ha basado en la investigación explicativa, a través de la cual se exponen las razones de ocurrencia de un fenómeno o se muestran los mecanismos por los que se relacionan dos o más variables, lo que permitió conjugar definiciones y supuestos de las relaciones encontradas entre los valores organizacionales identificados de acuerdo a la opinión de los entrevistados y que resultaron ser significativos con los resultados de productividad que presentan las empresas que fueron objeto de esta investigación La población estuvo conformada por 40 empresas activas del sector metalúrgico y minero de Ciudad Guayana, Estado Bolívar, Venezuela, pertenecientes a la Asociación de Industriales Metalúrgicos y de Minería de la región Guayana (AIMM) y al directorio de la Cámara de Industriales y Mineros de Guayana. La muestra estudiada corresponde a 25 empresas que representan el 62% de la población. El proceso que se siguió para generar el modelo explicativo contempla tres etapas. La primera consiste en la fase descriptiva donde se recogió la información referente a la productividad de las empresas y a la determinación de los valores organizacionales identificados a través del análisis cualitativo de las entrevistas que se realizaron a los informantes de las empresas de la muestra. Para ello se utilizó el software Atlas ti 6.0. La segunda etapa, denominada comparativa, consistió en determinar la relación entre la productividad y los valores organizacionales, a través de las tablas de contingencias, de acuerdo con el grado de significancia que mostró el estadístico Chi- cuadrado. La tercera y última etapa del proceso es la fase explicativa que consistió en estimar la magnitud de la relación entre las variables productividad y valores organizacionales utilizando el coeficiente de contingencia de Pearson, y en establecer las asociaciones de acuerdo a las proximidades observadas que resultaron del análisis de correspondencias múltiples. Entre los hallazgos del estudio desarrollado se encontró que la productividad de las empresas puede fijarse en tres categorías: alta, media y baja y entre los factores que afectan a la productividad destacan, en el contexto externo: el gobierno, los clientes y los proveedores y en el contexto interno: la mano de obra, los materiales y los suministros. Según la opinión de los gerentes entrevistados, los valores organizacionales que caracterizan a las empresas del sector estudiado se agrupan en veintisiete categorías, que se clasifican en los siguientes componentes: entorno mercado, clientes, proveedores y otras empresas aliadas, medio ambiente, forma de tratar la Dirección al resto de empleados, forma de trabajar cotidiana y gestión de los recursos económicos. Los valores organizacionales que resultaron ser significativos fueron la innovación, la honestidad y el orden y limpieza. La magnitud de la relación encontrada del valor innovación fue moderadamente fuerte. Se infiere que las empresas, al tener una Productividad baja, deciden innovar en el desarrollo de nuevos productos. El valor honestidad arrojó una relación moderadamente fuerte, determinando que las empresas de Productividad alta basan sus relaciones con los proveedores en la honestidad. Finalmente, el valor orden y limpieza muestra una relación moderadamente débil, lo que hace suponer que las empresas de Productividad media tienen alguna preferencia por mantener el orden y limpieza en las áreas de trabajo. El modelo explicativo de la relación entre productividad y valores organizacionales, en las PYMES del sector metalúrgico y minero de Ciudad Guayana, quedó conformado por los siguientes componentes: mercado, clientes, proveedores y otras empresas aliadas, y medio ambiente. No se encontraron relaciones en los componentes forma de tratar la Dirección al resto de empleados, forma de trabajar cotidiana y gestión de los recursos económicos. ABSTRACT As a result of globalization processes, the business world is subject to constant change. This has resulted in the need for companies to evaluate their performance in order to adjust their processes to the best managerial and operational practices, with the goal to adapt to the demands present in the scenarios in which they are embedded. This research aimed to develop an explanatory model of the relationship between productivity and organizational values. In addition, it was based on the different approaches or theories that relate the importance for enterprises of the organizational values to achieve their goals. Specifically, reference was made to the classification of organizational values, which includes the model of Management by Values (DPV) following García and Dolan (1997). The SMEs, considering the effect of organizational values on productivity, can support their management through the commitment of their people to achieve productivity results that they want or need to accomplish. The study approach was based on explanatory research, which presents the reasons for occurrence of a phenomenon and the mechanisms through which two or more variables are related. This allowed to combine definitions and assumptions about the relationship found between organizational values and the productivity results of the companies that took part in this research. Organizational values were identified in the opinion of the managers interviewed, and were found to be significant with the productivity results. The population consisted of 40 active enterprises of the metallurgical and mining industry of Ciudad Guayana, Estado Bolivar, Venezuela. These enterprises were members of the Association of Metallurgical and Mining Industry of the Guayana Region (AIMM, by its acronym in Spanish) and the Directory of the Chamber of Industrial and Mining of Guayana. The sample of the study is comprised of 25 enterprises, which represent 62% of the total population. The process which has been followed to generate the explanatory model involves three stages. The first stage is the descriptive phase where the information about enterprises productivity and the determination of organizational values is gathered. These organizational values were identified by a qualitative analysis of the interviews conducted with managers of each enterprise. This analysis was performed using the Atlas ti 6.0 software. The second stage, denominated comparative, consisted in determining the relationship between productivity and organizational values through contingency tables, and according to the degree of significance showed by the Chi-Square, statistic. The third, and final stage of the process, is the explanatory phase. This consisted in estimating the magnitude of the relationship between productivity and organizational values variables using the Pearson's contingency coefficient. In addition, this stage comprises the establishment of the associations according to the observed proximities that resulted from the multiple correspondence analysis. Among the findings of this study, it was found that the productivity of enterprises can be set in three categories: high, medium and low. Additionally, it was found that in the external context the factors that stand out affecting productivity are: government policy, customers and suppliers, while in the domestic context they are: labor, materials and supplies. According to the opinion of the managers interviewed the organizational values that characterize the companies that were studied are grouped into twenty seven categories. These categories are classified into the following components: market environment, customers, suppliers and other allied companies, the environment, how Management deals with of the employees, way to work every day, and management of economic resources. Organizational values that were found to be significant were innovation, honesty and order and cleanliness. The magnitude of the relation of the innovation value was found to be moderately strong. It is inferred that companies that have low productivity decide to innovate in the development of new products. The honesty value showed a moderately strong relation, determining that high productivity enterprises base their relationships with suppliers on honesty. Lastly, the order and cleanliness value showed a moderately weak relation, which suggests that average productivity enterprises have a preference to maintain order and cleanliness in the work areas. The explanatory model of the relationship between productivity and organizational values, in the SMEs of the metallurgical and mining sector of Ciudad Guayana, was composed of the following components: market, customers, suppliers and other allied companies, and the environment. No relationships were found in the following components: how Management deals with employees, way to work every day, and management of economic resources.

Metodología de simulación del almacenamiento geológico de CO2 como contribución a la solución al problema del Cambio Climático, aplicada a la estructura BG-GE-08 (oeste de la Comunidad de Murcia)

Una de las medidas de mitigación del Cambio Climático propuestas al amparo de la ONU por el IPCC (Intergovermental Panel on Climate Change) en su ‘Informe de Síntesis 2007’ consiste en la puesta en marcha de acciones para la captación y almacenamiento de dióxido de carbono, existiendo tres tipos de formaciones geológicas idóneas para el almacenamiento geológico de este gas: yacimientos de petróleo y gas agotados, capas de carbón no explotables y formaciones salinas profundas. En el caso de las formaciones salinas profundas, el problema fundamental para llevar a cabo un estudio de almacenamiento de CO2, reside en la dificultad de obtención de datos geológicos del subsuelo en una cierta estructura seleccionada, cuyas características pueden ser a priori idóneas para la inyección y almacenamiento del gas. Por este motivo la solución para poder analizar la viabilidad de un proyecto de almacenamiento en una estructura geológica pasa por la simulación numérica a partir de la modelización 3D del yacimiento. Los métodos numéricos permiten simular la inyección de un caudal determinado de dióxido de carbono desde un pozo de inyección localizado en una formación salina. En la presente tesis se ha definido una metodología de simulación de almacenamiento geológico de CO2, como contribución a la solución al problema del Cambio Climático, aplicada de forma concreta a la estructura BG-GE-08 (oeste de la Comunidad de Murcia). Esta estructura geológica ha sido catalogada por el IGME (Instituto Geológico y Minero de España) como idónea para el almacenamiento de dióxido de carbono, dada la existencia de una capa almacén confinada entre dos capas sello. ABSTRACT One of the climate change mitigation proposals suggested by the IPCC (Intergovermental Panel on Climate Change) in its ‘Synthesis Report 2007’ involves the launch of actions for capturing and storing carbon dioxide, existing three different geological structures suitable for gas storage: oil and gas reservoirs already drained, useless coal layers and deep saline structures. In case of deep saline structures, the main problem to develop a study of CO2 storage is the difficulty of obtaining geological data for some selected structure with characteristics that could be suitable for injection and gas storage. According to this situation, the solution to analyze the feasibility of a storage project in a geological structure will need numerical simulation from a 3D model. Numerical methods allow the simulation of the carbon dioxide filling in saline structures from a well, used to inject gas with a particular flow. In this document a simulation methodology has been defined for geological CO2 storage, as a contribution to solve the Climatic Change problem, applied to the structure BG-GE-08 (west of Murcia region). This geological structure has been classified by the IGME (Geological and Mining Institute of Spain) as suitable for the storage of carbon dioxide given the existence of a storage layer confined between two seal layers.

Micromechanical basis for shear strength of rock discontinuities

The theoretical basis for evaluating shear strength in rock joints is presented and used to derive an equation that governs the relationship between tangential and normal stress on the joint during situations of slippage between the joint faces. The dependent variables include geometric dilatancy, the instantaneous friction angle, and a parameter that considers joint surface roughness. The effect roughness is studied, and the aforementioned formula is used to analyse joints under different conditions. A mathematical expression is deduced that explains Barton's value for the joint roughness coefficient (JRC) according to the roughness geometry. In particular, when the Hoek and Brown failure criterion is used for a rock in the contact with the surface roughness plane, it is possible to determine the shear strength of the joint as a function of the relationship between the uniaxial compressive strength of the wall with the normal stress acting on the wall. Finally, theoretical results obtained for the geometry of a three-dimensional joint are compared with those of the Barton's formulation

Ultimate bearing capacity at the tip of a pile in rock based on the modifed Hoek-Brown criterion

Highlights of this paper: a method for calculating the ultimate bearing capacity at the tip of a pile is presented; ultimate bearing capacity is generalized for the modified Hoek–Brown criterion; perfect plasticity, isotropy, weightless rock media, without inertial forces, Meyerhof׳s hypothesis are considered; all the formulation can be programmed in a spreadsheet.

Metodología para la remediación de instalaciones de residuos mineros procedentes de la minería metálica orientada a la reducción del riesgo ambiental y al aprovechamiento de sus residuos

Las instalaciones de residuos mineros abandonadas procedentes de la minería metálica pueden suponer un grave riesgo medioambiental y de seguridad debido a su potencial contaminante y a la posibilidad de ocasionar accidentes por su fallo estructural. Desgraciadamente, en la mayoría de los países de la Unión Europea existen un gran número de presas, balsas, pilas de lixiviación y escombreras mineras cerradas que se encuentran abandonadas y sin ningún control estructural o ambiental al haberse originado en actividades extractivas finalizadas con anterioridad a la aparición de las primeras normativas de índole ambiental aplicables. Algunas de las instalaciones de residuos mineros abandonadas pueden además contener reservas de metales apreciables al proceder sus residuos de actividades extractivas pasadas en las que se emplearon procesos metalúrgicos e hidrometalúrgicos de concentración con eficiencias de recuperación inferiores a las obtenibles con técnicas extractivas actuales. En la presente tesis doctoral se ha desarrollado una metodología de análisis que puede servir de herramienta útil para la toma de decisiones en los procesos de remediación de instalaciones de residuos mineros procedentes de la minería metálica. Dicha metodología se ha construido a partir de los resultados que se puedan obtener del análisis de riesgos ambientales de las instalaciones estudiadas, estableciendo las metodologías más apropiadas para su remediación en función de los riesgos específicos que presenten. La metodología propuesta incluye además el análisis de la posibilidad de proceder al aprovechamiento de los residuos mineros presentes en las instalaciones mediante la extracción de sus metales, para lo que se han desarrollado una serie de expresiones que pueden emplearse en el análisis de la viabilidad en términos económicos, ambientales y sostenibles de dicho aprovechamiento obtenidas sobre la base de las últimas experiencias al respecto registradas bibliográficamente y del estudio de los costes de inversión y operación que pueden suponer dichas operaciones en función de las tecnologías extractivas empleadas. Para finalizar, en la última parte de la tesis se incluye un caso práctico de aplicación de la metodología desarrollada en el que se estudian las posibilidades de remediación de tres presas mineras abandonadas procedentes de la extracción de plomo y zinc y se analiza la posibilidad de proceder al aprovechamiento de sus residuos mediante la extracción de metales de sus estériles. ABSTRACT The abandoned mining waste facilities from the metallic mining may pose environmental and safety risks due to its pollution potential as well as due to the possibility of structural collapses. Unfortunately, in most countries of the European Union there are a large number of tailing dams, tailing ponds, leaching heaps and mining waste-rock dump sites that are abandoned without any structural or environmental control. That is because they were originated in extractive activities completed prior to the appearance of the first environmental applicable regulations. Some of the abandoned mining waste facilities can also contain significant reserves of metals due to the fact that their waste comes from past mining activities when metallurgical processes and hydrometallurgical concentration were used with lower efficiency than those obtainable with present recovery mining techniques. At present thesis a method of analysis that can serve as a useful tool for decision making in the process of remediation of mining waste facilities from the metal mining has been developed. This methodology has been built from the results that may be obtained from the analysis of environmental risks at studied facilities, therefore establishing the most appropriate methodologies for its remediation based on their specific risks. The proposed methodology also includes the analysis of the possibility to beneficiate the mining residues contained on the mining waste facilities by extracting their metals. For that purpose, some expressions have been developed that can be used in the analysis of the economic viability of such extraction. Expressions are obtained on the basis of recent registered bibliographically, experiences and from the study of investment and operating costs that may suppose such extractions depending on extractive technologies used. Finally, in the last part of the thesis a case of application of the methodology proposed has been developed, in which, the possibilities for remediation of three abandoned mining dams related to the extraction of lead and zinc are studied and the possibility of beneficiate their waste by extracting metals is analyzed.

Direct measurement of hydrogen bonding in DNA nucleotide bases by atomic force microscopy.

We have used self-assembled purines and pyrimidines on planar gold surfaces and on gold-coated atomic force microscope (AFM) tips to directly probe intermolecular hydrogen bonds. Electron spectroscopy for chemical analysis (ESCA) and thermal programmed desorption (TPD) measurements of the molecular layers suggested monolayer coverage and a desorption energy of about 25 kcal/mol. Experiments were performed under water, with all four DNA bases immobilized on AFM tips and flat surfaces. Directional hydrogen-bonding interaction between the tip molecules and the surface molecules could be measured only when opposite base-pair coatings were used. The directional interactions were inhibited by excess nucleotide base in solution. Nondirectional van der Waals forces were present in all other cases. Forces as low as two interacting base pairs have been measured. With coated AFM tips, surface chemistry-sensitive recognition atomic force microscopy can be performed.

Desenvolvimento de eletrodos de ouro modificados com camadas auto-arranjadas de tióis para formação in situ de nanopartículas de ouro

Eletrodos de ouro foram utilizados para preparação de eletrodos modificados com monocamadas auto arranjadas de tióis. A limpeza do substrato metálico é fundamental para que a arquitetura molecular superficial possa ser efetuada com boa estabilidade e reprodutibilidade, além de fornecer dados utilizados no cálculo de área ativa, necessários na normalização dos valores de recobrimento superficial obtidos nas determinações de dessorção do agente modificador interno, o ácido 3-mercaptopropiônico. Os eletrodos modificados consistiram no recobrimento de transdutores de ouro com ácido 3-mercaptopropiônico através da imersão do eletrodo de Au em solução 25 mmolL-1 deste composto e, em seguida, com moléculas de cisteína, através da imersão do eletrodo de Au/3-MPA em solução 0,1 molL-1 deste composto, originando um sensor do tipo Au/3-MPA/CSH. As moléculas de cisteína foram utilizadas como agente redutor para obtenção de nanopartículas de Au na superfície do eletrodo modificado, através da aplicação de 20 µL de solução de HAuCl4. Após a confirmação da ausência do par tiólico superficial responsável pela redução das nanopartículas, o eletrodo Au/3-MPA/CSH/AuNp foi utilizado na determinação de peróxido de hidrogênio em soluções de concentrações crescentes em tampão fosfato 0,1 molL-1 pH 7,2.