Inhibition of gastric emptying and intestinal transit in anesthetized rats by a Tityus serrulatus scorpion toxin

The effects of a fraction (T1) of Tityus serrulatus scorpion venom prepared by gel filtration on gastric emptying and small intestinal transit were investigated in male Wistar rats. Fasted animals were anesthetized with urethane, submitted to tracheal intubation and right jugular vein cannulation. Scorpion toxin (250 µg/kg) or saline was injected iv and 1 h later a bolus of saline (1.0 ml/100 g) labeled with 99m technetium-phytate (10 MBq) was administered by gavage. After 15 min, animals were sacrificed and the radioactivity remaining in the stomach was determined. Intestinal transit was evaluated by instillation of a technetium-labeled saline bolus (1.0 ml) through a cannula previously implanted in the duodenum. After 60 min, the progression of the marker throughout 7 consecutive gut segments was estimated by the geometric center method. Gastric retention of the liquid test meal in rats injected with scorpion toxin (median: 88%; range: 52-95%) was significantly higher (P<0.02) than in controls (54%; 21-76%), an effect which was not modified by gastric secretion blockade with ranitidine. The progression of the isotope marker throughout the small intestine was significantly slower (P<0.05) in rats treated with toxin (1.2; 1.0-2.5) than in control animals (2.3; 1.0-3.2). Inhibition of both gastric emptying and intestinal transit in rats injected with scorpion toxin suggests an increased resistance to aboral flow, which might be caused by abnormal neurotransmitter release or by the local effects of venom on smooth muscle cells.

K-liitoksen epäkeskeisen tuennan aiheuttaman sekundäärisen momentin määritys

Työssä on tutkittu laboratoriokokeen ja elementtimenetelmän avulla eri geometrioiden vaikutusta sekundääriseen momentin syntymiseen K-liitoksella. Kokeen liitos on tehty S700-lujuusluokan Ruukin Optim 700 plus MH nelikulmaisista rakenneputkista (RHS). Elementtimalleissa on käytetty geometrista ja materiaalista epälineaarisuutta ennustamaan liitoksen muodonmuutoskykyä ja laskennallista kestävyyttä. Liitoksen elementtimalleissa muutettavia geometrioita ovat: vapaaväli, uumasauvan ja paarteen välinen kulma, paarteen seinämän paksuus, liitoksen eksentrisyys ja uumasauvan ja paarteen leveyden suhde. Laboratoriokokeen liitoksen vetouumasauvassa vaikuttava sekundäärisen momentin aiheuttama jännitys on noin 25 % vetouumasauvan myötörajasta. Suurin sekundäärinen momentti syntyy, kun vapaaväliä pienennetään ja uumasauvaa kavennetaan paarteeseen nähden. Eurocode 3:n mitoitusohjeita voidaan elementtimallien perusteella soveltaa tietyille geometrioille turvallisesti.

Relationship between microalbuminuria and cardiac structural changes in mild hypertensive patients

The aim of this study was to determine the relationship between urinary albumin excretion (UAE), cardiac structural changes upon echocardiography and 24-h ambulatory blood pressure (ABPM) levels. Twenty mild hypertensive patients (mean age 56.8 ± 9.6 years) were evaluated. After 2 weeks of a washout period of all antihypertensive drugs, all patients underwent an echocardiographic evaluation, a 24-h ABPM and an overnight urine collection. Systolic and diastolic blood pressure during 24-h ABPM was 145 ± 14/91 ± 10 mmHg (daytime) and 130 ± 14/76 ± 8 mmHg (nighttime), respectively. Seven (35%) patients presented UAE > or = 15 µg/min, and for the whole group, the geometric mean value for UAE was 10.2 x/÷ 3.86 µg/min. Cardiac measurements showed mean values of interventricular septum thickness (IVS) of 11 ± 2.3 mm, left ventricular posterior wall thickness (PWT) of 10 ± 2.0 mm, left ventricular mass (LVM) of 165 ± 52 g, and left ventricular mass index (LVMI) of 99 ± 31 g/m². A forward stepwise regression model indicated that blood pressure levels did not influence UAE. Significant correlations were observed between UAE and cardiac structural parameters such as IVS (r = 0.71, P<0.001), PWT (r = 0.64, P<0.005), LVM (r = 0.65, P<0.005) and LVMI (r = 0.57, P<0.01). Compared with normoalbuminuric patients, those who had microalbuminuria presented higher values of all cardiac parameters measured. The predictive positive and negative values of UAE > or = 15 µg/min for the presence of geometric cardiac abnormalities were 75 and 91.6%. These data indicate that microalbuminuria in essential hypertension represents an early marker of cardiac structural damage.

Immunogenicity of a 23-valent pneumococcal polysaccharide vaccine in Brazilian elderly

Serum antibodies specific for the capsular polysaccharides of Streptococcus pneumoniae provide protection against invasive pneumococcal infection. In Brazil, this vaccine has been used for people over 65 years with clinical risk to develop pneumococcal infection since 1999. We evaluated the immune response of 102 elderly subjects (75.5% females and 24.5% males) with a mean age of 71 years, and 19 young healthy adults (63.2% females and 36.8% males) with a mean age of 27 years. The elderly study group consisted of outpatients who received follow-up care in the Geriatric Department of General Hospital, Faculty of Medicine, University of São Paulo. None had acute illness at the time of vaccination. Both groups were immunized with one intra-deltoid injection with 0.5 ml of a 23-valent pneumococcal polysaccharide vaccine. The total IgG specific antibody concentrations to capsular polysaccharides 1, 3, 5, 6B, 8, and 14 were determined against pre- and 1-month post-vaccination sera. All samples were analyzed according to the second-generation pneumococcal polysaccharide ELISA protocol. We observed that the pneumococcal polysaccharide vaccine evoked consistent antibody increase for serotypes 1, 5, 6B, 8, and 14 (geometric mean concentration increase of 2.46 in the elderly and 2.84 in the young adults). Otherwise, we observed no increase in antibody concentration for serotype 3 in both groups.

Inducible nitric oxide synthase and tumor necrosis factor-alpha in delayed gastric emptying and gastrointestinal transit induced by lipopolysaccharide in mice

Gastrointestinal motility disturbances during endotoxemia are probably caused by lipopolysaccharide (LPS)-induced factors: candidates include nitric oxide (NO), tumor necrosis factor-alpha (TNF-alpha), interleukin-1ß, and interleukin-6. Flow cytometry was used to determine the effects of LPS and these factors on gastric emptying (evaluated indirectly by determining percent gastric retention; %GR) and gastrointestinal transit (GIT) in male BALB/c mice (23-28 g). NO (300 µg/mouse, N = 8) and TNF-alpha (2 µg/mouse, N = 7) increased (P < 0.01) GR and delayed GIT, mimicking the effect of LPS (50 µg/mouse). During early endotoxemia (1.5 h after LPS), inhibition of inducible NO synthase (iNOS) by a selective inhibitor, 1400 W (150 µg/mouse, N = 11), but not antibody neutralization of TNF-alpha (200 µg/mouse, N = 11), reversed the increase of GR (%GR 78.8 ± 3.3 vs 47.2 ± 7.5%) and the delay of GIT (geometric center 3.7 ± 0.4 vs 5.6 ± 0.2). During late endotoxemia (8 h after LPS), both iNOS inhibition (N = 9) and TNF-alpha neutralization (N = 9) reversed the increase of GR (%GR 33.7 ± 2.0 vs 19.1 ± 2.6% (1400 W) and 20.1 ± 2.0% (anti-TNF-alpha)), but only TNF-alpha neutralization reversed the delay of GIT (geometric center 3.9 ± 0.4 vs 5.9 ± 0.2). These findings suggest that iNOS, but not TNF-alpha, is associated with delayed gastric emptying and GIT during early endotoxemia and that during late endotoxemia, both factors are associated with delayed gastric emptying, but only TNF-alpha is associated with delayed GIT.

Prevalence of diphtheria and tetanus antibodies and circulation of Corynebacterium diphtheriae in São Paulo, Brazil

The introduction of routine vaccination against tetanus and diphtheria in Brazil has decreased the incidence and changed the epidemiology of both diseases. We then investigated the prevalence of Corynebacterium diphtheriae carrier status and diphtheria and tetanus immunity in São Paulo, Brazil. From November 2001 to March 2003, 374 individuals were tested for the presence of C. diphtheriae in the naso-oropharynx and of serum diphtheria and tetanus antibodies. Participants were all healthy individuals without acute or chronic pathologies and they were stratified by age as follows: 0-12 months and 1-4, 5-9, 10-14, 15-24, 25-39, 40-59, and ³60 years. Antibodies were assessed using a double-antigen ELISA. C. diphtheriae species were identified by biochemical analysis and toxigenicity was assessed by the Elek test. For diphtheria, full protection (antibodies ³0.1 IU/mL) was present in 84% of the individuals, 15% had basic protection (antibodies ³0.01 and <0.1 IU/mL) and 1% were susceptible (antibodies <0.01 IU/mL). Full tetanus protection (antibodies ³0.1 IU/mL) was present in 79% of the participants, 18% had basic protection (antibodies ³0.01 and <0.1 IU/mL) and 3% were susceptible (antibodies <0.01 IU/mL). The geometric mean of diphtheria and tetanus antibodies reached the highest values at 5-9 years and decreased until the 40-59-year age range, increasing again in individuals over 60 years. Three participants (0.8%) were carriers of C. diphtheriae, all non-toxigenic strains. The present results demonstrate the clear need of periodic booster for tetanus and diphtheria vaccine in adolescents and adults after primary immunization in childhood.

Sildenafil delays the intestinal transit of a liquid meal in awake rats

Sildenafil slows down the gastric emptying of a liquid test meal in awake rats and inhibits the contractility of intestinal tissue strips. We studied the acute effects of sildenafil on in vivo intestinal transit in rats. Fasted, male albino rats (180-220 g, N = 44) were treated (0.2 mL, iv) with sildenafil (4 mg/kg) or vehicle (0.01 N HCl). Ten minutes later they were fed a liquid test meal (99m technetium-labeled saline) injected directly into the duodenum. Twenty, 30 or 40 min after feeding, the rats were killed and transit throughout the gastrointestinal tract was evaluated by progression of the radiotracer using the geometric center method. The effect of sildenafil on mean arterial pressure (MAP) was monitored in a separate group of rats (N = 14). Data (medians within interquartile ranges) were compared by the Mann-Whitney U-test. The location of the geometric center was significantly more distal in vehicle-treated than in sildenafil-treated rats at 20, 30, and 40 min after test meal instillation (3.3 (3.0-3.6) vs 2.9 (2.7-3.1); 3.8 (3.4-4.0) vs 2.9 (2.5-3.1), and 4.3 (3.9-4.5) vs 3.4 (3.2-3.7), respectively; P < 0.05). MAP was unchanged in vehicle-treated rats but decreased by 25% (P < 0.05) within 10 min after sildenafil injection. In conclusion, besides transiently decreasing MAP, sildenafil delays the intestinal transit of a liquid test meal in awake rats.

Correlates of C-reactive protein levels in young adults: a population-based cohort study of 3827 subjects in Brazil

The socio-demographic, behavioral and anthropometric correlates of C-reactive protein levels were examined in a representative young adult Brazilian population. The 1982 Pelotas Birth Cohort Study (Brazil) recruited over 99% of births in the city of Pelotas that year (N = 5914). Individuals belonging to the cohort have been prospectively followed up. In 2004-2005, 77.4% of the cohort was traced, members were interviewed and 3827 individuals donated blood. Analyses of the outcome were based on a conceptual model that differentiated confounders from potential mediators. The following independent variables were studied in relation to levels of C-reactive protein in sex-stratified analyses: skin color, age, family income, education, parity, body mass index, waist circumference, smoking, fat/fiber/alcohol intake, physical activity, and minor psychiatric disorder. Geometric mean (95% confidence interval) C-reactive protein levels for the 1919 males and 1908 females were 0.89 (0.84-0.94) and 1.96 mg/L (1.85-2.09), respectively. Pregnant women and those using oral contraceptive therapies presented the highest C-reactive protein levels and all sub-groups of women had higher levels than men (P < 0.001). Significant associations between C-reactive protein levels were observed with age, socioeconomic indicators, obesity status, smoking, fat and alcohol intake, and minor psychiatric disorder. Associations were stronger at higher levels of C-reactive protein and some associations were sex-specific. We conclude that both distal (socio-demographic) and proximal (anthropometric and behavioral) factors exert strong effects on C-reactive protein levels and that the former are mediated to some degree by the latter.

Diphtheria toxin IgG levels in military and civilian blood donors in Rio de Janeiro, Brazil

Serologic data on diseases that are preventable by vaccines are necessary to evaluate the success of immunization programs and to identify susceptible subgroups. In the present study, we determined serum IgG levels against diphtheria toxin of military and civilian blood donors (N = 75; 69.3% males and 30.7% females) aged 18-64 years, from the Brazilian Army Biology Institute, Rio de Janeiro, using a commercial diphtheria kit (Diphtheria IgG ELISA; IBL, Germany). Most (63%) unprotected military donors were from the older age group of 41 to 64 years. In contrast, the majority (71%) of young military donors (18 to 30 years) were fully protected. About half of the military donors aged 31 to 40 years were protected against diphtheria. Among the civilians, about 50% of persons aged 18 to 30 years and 31 to 40 years had protective antibody levels against diphtheria as also did 64% of individuals aged 41 to 64 years. All civilians had a similar antibody response (geometric mean = 0.55 IU/mL) independent of age group. Military donors aged 18-30 years had higher IgG levels (geometric mean = 0.82 IU/mL) than military donors of 41-64 years (geometric mean = 0.51 IU/mL; P > 0.05). In conclusion, the existence of a considerable proportion of susceptible adults supports the position that reliable data on the immune status of the population should be maintained routinely and emphasizes the importance of adequate immunization during adulthood.

Noncrystalline uric acid inhibits proteoglycan and glycosaminoglycan synthesis in distal tubular epithelial cells (MDCK)

Hyperuricemia is associated with renal stones, not only consisting of uric acid (UrAc) but also of calcium oxalate (CaOx). Glycosaminoglycans (GAGs) are well-known inhibitors of growth and aggregation of CaOx crystals. We analyzed the effect of noncrystalline UrAc on GAG synthesis in tubular distal cells. MDCK (Madin-Darby canine kidney) cells were exposed to noncrystalline UrAc (80 µg/mL) for 24 h. GAGs were labeled metabolically and characterized by agarose gel electrophoresis. The expression of proteoglycans and cyclooxygenase 2 (COX-2) was assessed by real-time PCR. Necrosis, apoptosis and prostaglandin E2 (PGE2) were determined by acridine orange, HOESCHT 33346, and ELISA, respectively. CaOx crystal endocytosis was evaluated by flow cytometry. Noncrystalline UrAc significantly decreased the synthesis and secretion of heparan sulfate into the culture medium (UrAc: 2127 ± 377; control: 4447 ± 730 cpm) and decreased the expression of perlecan core protein (UrAc: 0.61 ± 0.13; control: 1.07 ± 0.16 arbitrary units), but not versican. Noncrystalline UrAc did not induce necrosis or apoptosis, but significantly increased COX-2 and PGE2 production. The effects of noncrystalline UrAc on GAG synthesis could not be attributed to inflammatory actions because lipopolysaccharide, as the positive control, did not have the same effect. CaOx was significantly endocytosed by MDCK cells, but this endocytosis was inhibited by exposure to noncrystalline UrAc (control: 674.6 ± 4.6, CaOx: 724.2 ± 4.2, and UrAc + CaOx: 688.6 ± 5.4 geometric mean), perhaps allowing interaction with CaOx crystals. Our results indicate that UrAc decreases GAG synthesis in MDCK cells and this effect could be related to the formation of UrAc and CaOx stones.

Target-directed catalytic metallodrugs

Most drugs function by binding reversibly to specific biological targets, and therapeutic effects generally require saturation of these targets. One means of decreasing required drug concentrations is incorporation of reactive metal centers that elicit irreversible modification of targets. A common approach has been the design of artificial proteases/nucleases containing metal centers capable of hydrolyzing targeted proteins or nucleic acids. However, these hydrolytic catalysts typically provide relatively low rate constants for target inactivation. Recently, various catalysts were synthesized that use oxidative mechanisms to selectively cleave/inactivate therapeutic targets, including HIV RRE RNA or angiotensin converting enzyme (ACE). These oxidative mechanisms, which typically involve reactive oxygen species (ROS), provide access to comparatively high rate constants for target inactivation. Target-binding affinity, co-reactant selectivity, reduction potential, coordination unsaturation, ROS products (metal-associated vsmetal-dissociated; hydroxyl vs superoxide), and multiple-turnover redox chemistry were studied for each catalyst, and these parameters were related to the efficiency, selectivity, and mechanism(s) of inactivation/cleavage of the corresponding target for each catalyst. Important factors for future oxidative catalyst development are 1) positioning of catalyst reduction potential and redox reactivity to match the physiological environment of use, 2) maintenance of catalyst stability by use of chelates with either high denticity or other means of stabilization, such as the square planar geometric stabilization of Ni- and Cu-ATCUN complexes, 3) optimal rate of inactivation of targets relative to the rate of generation of diffusible ROS, 4) targeting and linker domains that afford better control of catalyst orientation, and 5) general bio-availability and drug delivery requirements.

Air blast freezing of fruit pulp models in commercial boxes: influence of preferential channels in the bed on freezing times estimating

The freezing times of fruit pulp models packed and conditioned in multi-layered boxes were evaluated under conditions similar to those employed commercially. Estimating the freezing time is a difficult practice due to the presence of significant voids in the boxes, whose influence may be analyzed by means of various methods. In this study, a procedure for estimating freezing time by using the models described in the literature was compared with experimental measurements by collecting time/temperature data. The following results show that the airflow through packages is a significant parameter for freezing time estimation. When the presence of preferential channels was considered, the predicted freezing time in the models could be 10% lower than the experimental values, depending on the method. The isotherms traced as a function of the location of the samples inside the boxes showed the displacement of the thermal center in relation to the geometric center of the product.

Generative Part-Based Gabor Object Detector

Object detection is a fundamental task of computer vision that is utilized as a core part in a number of industrial and scientific applications, for example, in robotics, where objects need to be correctly detected and localized prior to being grasped and manipulated. Existing object detectors vary in (i) the amount of supervision they need for training, (ii) the type of a learning method adopted (generative or discriminative) and (iii) the amount of spatial information used in the object model (model-free, using no spatial information in the object model, or model-based, with the explicit spatial model of an object). Although some existing methods report good performance in the detection of certain objects, the results tend to be application specific and no universal method has been found that clearly outperforms all others in all areas. This work proposes a novel generative part-based object detector. The generative learning procedure of the developed method allows learning from positive examples only. The detector is based on finding semantically meaningful parts of the object (i.e. a part detector) that can provide additional information to object location, for example, pose. The object class model, i.e. the appearance of the object parts and their spatial variance, constellation, is explicitly modelled in a fully probabilistic manner. The appearance is based on bio-inspired complex-valued Gabor features that are transformed to part probabilities by an unsupervised Gaussian Mixture Model (GMM). The proposed novel randomized GMM enables learning from only a few training examples. The probabilistic spatial model of the part configurations is constructed with a mixture of 2D Gaussians. The appearance of the parts of the object is learned in an object canonical space that removes geometric variations from the part appearance model. Robustness to pose variations is achieved by object pose quantization, which is more efficient than previously used scale and orientation shifts in the Gabor feature space. Performance of the resulting generative object detector is characterized by high recall with low precision, i.e. the generative detector produces large number of false positive detections. Thus a discriminative classifier is used to prune false positive candidate detections produced by the generative detector improving its precision while keeping high recall. Using only a small number of positive examples, the developed object detector performs comparably to state-of-the-art discriminative methods.

Meesauunin vaipan konepajavalmistus ja laaduntarkastus

Meesauuni on osa sulfaattisellutehdasta ja sen kemikaalikiertoa. Se on pyörivä kaltevaan tasoon asetettu rumpu-uuni, joka voi olla jopa 160 metriä pitkä ja halkaisijaltaan 5,5 metriä. Kalkki on kiertävä apukemikaali, jota käytetään soodakattilalta tulevan viherlipeän muuttamiseen valkolipeäksi. Meesauunin tehtävänä on kierrättää kalkki (CaO) uudelleen käytettäväksi kaustisoinnissa syntyneestä meesasta (CaCO3). Meesauunin vaipan konepajavalmistus on prosessina hyvin yksinkertainen, mutta toleranssivaatimukset ovat hyvin tiukat suhteutettuna meesauunin kokoon. Vaippalohkojen valmistus on siirtynyt halpatyövoiman maihin lähelle loppukäyttäjiä, joten vaatimukset piirustusten laadulle, valmistukselle, ohjeille ja tarkastamiselle ovat lisääntyneet. Uunin vaippa toimitetaan asennuspaikalle useassa lohkossa ja jokainen vaippalohko on tarkastettava ennen toimitusta. Virheellisten vaippalohkojen siirtyminen asennuspaikalle on estettävä. Työn tavoitteena oli parantaa meesauunin vaippalohkojen konepajavalmistuksen laaduntarkastusta. Tässä työssä tutkitaan mittausmenetelmiä vaippalohkojen geometrian mittaamiseen. Tärkeimmät uunin toiminnallisiin ominaisuuksiin vaikuttavat muototoleranssit vaippalohkoille ovat ympyrämäisyys ja keskiviivan suoruus. Virheet näissä toleransseissa aiheuttavat vaurioita uunin muurauksille ja liian suuria kuormituksia tuennoille. Vaippalohkot on mitattava pyöritysrullaston päällä ja konepajan olosuhteissa, mikä aiheuttaa omat haasteensa. Vaippalohkojen suuret massat ja dimensiot aiheuttavat vaippalohkoihin muodonmuutoksia. Muodonmuutokset täytyy olla hallinnassa, mikäli halutaan käyttää CMS-laitteistoja (Coordinate Measuring System). Meesauunin vaippalohkot ovat mitattavissa radiaalimittauksina tai käyttäen CMS-laitteistoja.

Effects of Fin Parameters on Gas-Side Heat Transfer Performance of H-Type Finned Tube Bundle in a Waste Heat Recovery Boiler

Alfa Laval Aalborg Oy designs and manufactures waste heat recovery systems utilizing extended surfaces. The waste heat recovery boiler considered in this thesis is a water-tube boiler where exhaust gas is used as the convective heat transfer medium and water or steam flowing inside the tubes is subject to cross-flow. This thesis aims to contribute to the design of waste heat recovery boiler unit by developing a numerical model of the H-type finned tube bundle currently used by Alfa Laval Aalborg Oy to evaluate the gas-side heat transfer performance. The main objective is to identify weaknesses and potential areas of development in the current H-type finned tube design. In addition, numerical simulations for a total of 15 cases with varying geometric parameters are conducted to investigate the heat transfer and pressure drop performance dependent on H-type fin geometry. The investigated geometric parameters include fin width and height, fin spacing, and fin thickness. Comparison between single and double tube type configuration is also conducted. Based on the simulation results, the local heat transfer and flow behaviour of the H-type finned tube is presented including boundary layer development between the fins, the formation of recirculation zone behind the tubes, and the local variations of flow velocity and temperature within the tube bundle and on the fin surface. Moreover, an evaluation of the effects of various fin parameters on heat transfer and pressure drop performance of H-type finned tube bundle has been provided. It was concluded that from the studied parameters fin spacing and fin width had the most significant effect on tube bundle performance and the effect of fin thickness was the least important. Furthermore, the results suggested that the heat transfer performance would increase due to enhanced turbulence if the current double tube configuration is replaced with single tube configuration, but further investigation and experimental measurements are required in order to validate the results.