The use of electronic voting systems to enhance deep learning.

The present paper introduces a technology-enhanced teaching method that promotes deep learning. Four stages that correspond to four different student cohorts were used for its development and to analyse its effectiveness. The effectiveness of the method has been assessed in terms of examination results as well as results obtained from class response system software statistics. The evidence gathered indicates that the method developed is very effective and its implementation is straightforward. Furthermore, its success in achieving results seems to be independent of the skills and/or experience of the lecturer.

Geochemistry of crustal formation and evolution

Terrestrial planets produce crusts as they differentiate. The Earth’s bi-modal crust, with a high-standing granitic continental crust and a low-standing basaltic oceanic crust, is unique in our solar system and links the evolution of the interior and exterior of this planet. Here I present geochemical observations to constrain processes accompanying crustal formation and evolution. My approach includes geochemical analyses, quantitative modeling, and experimental studies. The Archean crustal evolution project represents my perspective on when Earth’s continental crust began forming. In this project, I utilized critical element ratios in sedimentary records to track the evolution of the MgO content in the upper continental crust as a function time. The early Archean subaerial crust had >11 wt. % MgO, whereas by the end of Archean its composition had evolved to about 4 wt. % MgO, suggesting a transition of the upper crust from a basalt-like to a more granite-like bulk composition. Driving this fundamental change of the upper crustal composition is the widespread operation of subduction processes, suggesting the onset of global plate tectonics at ~ 3 Ga (Abstract figure). Three of the chapters in this dissertation leverage the use of Eu anomalies to track the recycling of crustal materials back into the mantle, where Eu anomaly is a sensitive measure of the element’s behavior relative to neighboring lanthanoids (Sm and Gd) during crustal differentiation. My compilation of Sm-Eu-Gd data for the continental crust shows that the average crust has a net negative Eu anomaly. This result requires recycling of Eu-enriched lower continental crust to the mantle. Mass balance calculations require that about three times the mass of the modern continental crust was returned into the mantle over Earth history, possibly via density-driven recycling. High precision measurements of Eu/Eu* in selected primitive glasses of mid-ocean ridge basalt (MORB) from global MORs, combined with numerical modeling, suggests that the recycled lower crustal materials are not found within the MORB source and may have at least partially sank into the lower mantle where they can be sampled by hot spot volcanoes. The Lesser Antilles Li isotope project provides insights into the Li systematics of this young island arc, a representative section of proto-continental crust. Martinique Island lavas, to my knowledge, represent the only clear case in which crustal Li is recycled back into their mantle source, as documented by the isotopically light Li isotopes in Lesser Antilles sediments that feed into the fore arc subduction trench. By corollary, the mantle-like Li signal in global arc lavas is likely the result of broadly similar Li isotopic compositions between the upper mantle and bulk subducting sediments in most arcs. My PhD project on Li diffusion mechanism in zircon is being carried out in extensive collaboration with multiple institutes and employs analytical, experimental and modeling studies. This ongoing project, finds that REE and Y play an important role in controlling Li diffusion in natural zircons, with Li partially coupling to REE and Y to maintain charge balance. Access to state-of-art instrumentation presented critical opportunities to identify the mechanisms that cause elemental fractionation during laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) analysis. My work here elucidates the elemental fractionation associated with plasma plume condensation during laser ablation and particle-ion conversion in the ICP.

Patterns of rare earth and other trace elements in Paleogene and Miocene clayey sediments from the Mondego platform (Central Portugal)

In the present study the origin of clay deposits occurring in an inland platform, in central Portugal, was investigated by their mineralogical and chemical composition. The clay deposits, exploited for ceramic industry are composed of silt-clay facies, the Monteira Member and the Arroça Member, which are assigned to the Coja Formation (Paleogene) and the Campelo Formation (Miocene), respectively. These clayey facies show almost compositional homogeneity, especially concerning texture. The mineralogical composition of the Monteira Member displays slightly higher content in smectite and interstratified clay minerals, which is supported by the chemical composition of samples analyzed. Both members present similar REE patterns, displaying an intense weathering record and little variation in the source area composition. Minor element geochemistry suggests low content in heavy minerals and transition metals. REE patterns and ratios of geochemical parameters support the dominant metasedimentary provenance, with a granite source contribution and also mature recycled sediments of continental origin. The study results’ suggest that the clays of these two members have the same source in terms of lithology and recycled sediments from the Hesperian massif. During the deposition of the Arroça Member, a major remobilization of the Monteira Member is suggested, explaining the geochemical similarity of both facies.

Quantifying uplift and denudation of a thermally heterogeneous crust: a detailed multi-thermochronometeric study of central west Britain

Topography is often thought as exclusively linked to mountain ranges formed by plates collision. It is now, however, known that apart from compression, uplift and denudation of rocks may be triggered by rifting, like it happens at elevated passive margins, and away from plate boundaries by both intra-plate stress causing reactivation of older structures, and by epeirogenic movements driven by mantle dynamics and initiating long-wavelength uplift. In the Cenozoic, central west Britain and other parts of the North Atlantic margins experienced multiple episodes of rock uplift and denudation that have been variable both at spatial and temporal scales. The origin of topography in central west Britain is enigmatic, and because of its location, it may be related to any of the processes mentioned above. In this study, three low temperature thermochronometers, the apatite fission track (AFT) and apatite and zircon (U-Th-Sm)/He (AHe and ZHe, respectively) methods were used to establish the rock cooling history from 200◦C to 30◦C. The samples were collected from the intrusive rocks in the high elevation, high relief regions of the Lake District (NW England), southern Scotland and northern Wales. AFT ages from the region are youngest (55–70 Ma) in the Lake District and increase northwards into southern Scotland and southwards in north Wales (>200 Ma). AHe and ZHe ages show no systematic pattern; the former range from 50 to 80 Ma and the latter tend to record the post-emplacement cooling of the intrusions (200–400 Ma). The complex, multi-thermochronometric inverse modelling suggests a ubiquitous, rapid Late Cretaceous/early Palaeogene cooling event that is particularly marked in Lake District and Criffell. The timing and rate of cooling in southern Scotland and in northern Wales is poorly resolved as the amount of cooling was less than 60◦C. The Lake District plutons were at >110◦C prior to the early Palaeogene; cooling due to a combined effect of high heat flow, from the heat producing granite batholith, and the blanketing effect of the overlying low conductivity Late Mesozoic limestones and mudstones. Modelling of the heat transfer suggests that this combination produced an elevated geothermal gradient within the sedimentary rocks (50–70◦C/km) that was about two times higher than at the present day. Inverse modelling of the AFT and AHe data taking the crustal structure into consideration suggests that denudation was the highest, 2.0–2.5 km, in the coastal areas of the Lake District and southern Scotland, gradually decreasing to less than 1 km in the northern Southern Uplands and northern Wales. Both the rift-related uplift and the intra-plate compression poorly correlate with the timing, location and spatial distribution of the early Palaeogene denudation. The pattern of early Palaeogene denudation correlates with the thickness of magmatic underplating, if the changes of mean topography, Late Cretaceous water depth and eroded rock density are taken into consideration. However, the uplift due to underplating alone cannot fully justify the total early Palaeogene denudation. The amount that is not ex- plained by underplating is, however, roughly spatially constant across the study area and can be referred to the transient thermal uplift induced by the mantle plume arrival. No other mechanisms are required to explain the observed pattern of denudation. The onset of denudation across the region is not uniform. Denudation started at 70–75 Ma in the central part of the Lake District whereas the coastal areas the rapid erosion appears to have initiated later (65–60 Ma). This is ~10 Ma earlier than the first vol- canic manifestation of the proto-Iceland plume and favours the hypothesis of the short period of plume incubation below the lithosphere before the volcanism. In most of the localities, the rocks had cooled to temperatures lower than 30◦C by the end of the Palaeogene, suggesting that the total Neogene denudation was, at a maximum, several hundreds of metres. Rapid cooling in the last 3 million years is resolved in some places in southern Scotland, where it could be explained by glacial erosion and post-glacial isostatic uplift.

Contribuição para o conhecimento da geologia do Grupo das Beiras (CXG) na região do Caramulo-Buçaco, Portugal Central

O presente trabalho ocupa-se do estudo do Complexo Xisto-Grauváquico ante-ordovícico (Grupo das Beiras) na região do Caramulo-Buçaco (centro de Portugal). Em termos geológicos, a área estudada pertence à Zona Centro Ibérica e encontra-se limitada a N pelo granito do Caramulo, a S pela bacia meso-cenozóica de Arganil, a W pelo sinclinal paleozóico do Buçaco e pela bacia meso-cenozóica ocidental portuguesa e a E pelo sinclinal paleozóico de Arganil e pelo plutonito granítico de Tábua-Santa Comba Dão; no seio da área estudada encontra-se a bacia meso-cenozóica de Mortágua. Com base nas características litológicas e estruturais distinguem-se no Complexo Xisto Grauváquico 4 grandes conjuntos litológicos concordantes entre si, designados de Unidades I, II, III e IV, que se desenvolvem da base para o topo de N para S. A Unidade I situa-se a N da região. O seu limite inferior é desconhecido, e o superior posiciona-se no último conjunto arenoso com potência decamétrica. É constituída por xistos cinzentos e negros com intercalações de arenitos de espessura não superior a 100 metros e de extensão lateral quilométrica. Apresenta uma espessura mínima de 1000 m. A Unidade II apresenta consideravelmente menor proporção de material arenoso intercalado entre os pelitos comparativamente à unidade inferior. É caracterizada por apresentar um predomínio de material silto-argiloso e escassos níveis arenosos com potência não superior à dezena de metros e escassa continuidade lateral. Cartograficamente esta unidade constitui uma franja alargada de orientação próxima a E-W. Apresenta uma espessura aproximada de 1500 m. A Unidade III é caracterizada pela presença de conjuntos arenosos com extensão lateral quilométrica e espessura de várias dezenas de metros, separados por material silto-argiloso. Os limites inferior e superior estão situados respectivamente abaixo e acima dos principais conjuntos arenosos. Esta unidade apresenta uma espessura máxima estimada na ordem dos 2000 m. A Unidade IV, que é a unidade superior, apresenta um predomínio pelítico, com escassas intercalações de conjuntos arenosos. O seu limite inferior encontra-se no topo do último conjunto arenoso da Unidade III. Apresenta uma espessura mínima de 500 m. As características sedimentológicas das 4 unidades indicam uma sedimentação num ambiente de plataforma externa siliciclástica aberta, com a construção de barras e por vezes sujeita à acção de tempestades, com sucessivos períodos de superficialização e profundização numa bacia de sedimentação bastante subsidente. Em termos estruturais, para além duma deformação pré-ordovícica, que é comprovada pelo forte mergulho e dispersão da orientação dos eixos da 1ª fase varisca e da lineação de intersecção L1, a área estudada foi principalmente afectada pela Orogenia Varisca. A 1ª fase de deformação varisca (F1) gerou dobras com superfícies axiais e xistosidade associada (S1) de direcção WNW-ESE, e forte pendor para NNE. Estas dobras D1 apresentam comprimentos de onda que nunca chegam a ser quilométricos, desenvolvendo-se um grande flanco inverso denunciando a presença de uma antiforma para NNE e uma sinforma para SSW. A 2ª fase de deformação varisca (F2) actuou na parte nordeste da área estudada e é caracterizada por ter gerado dobras de comprimento de onda quilométrico, com planos axiais e xistosidade associada S2 de direcção NW-SE, subverticais ou a pender fortemente para NE. Embora com alguma dispersão, as lineações de intersecção L2 e os eixos das dobras D2 apresentam maioritariamente forte pendor para E. A direcção e tipos de estruturas da F2 sugerem uma correlação com a terceira fase definida em vários pontos da Zona Centro Ibérica e estreitamente relacionada com as intrusões graníticas. Do ponto de vista petrológico, distinguem-se várias rochas sedimentares (pelitos e arenitos) todas elas sujeitas a metamorfismo que não ultrapassa a fácies dos xistos verdes. Dentro das rochas sedimentares mais grosseiras, há a destacar a presença de arenitos vulcânicos cuja composição denuncia, não muito afastados da bacia sedimentar, a presença de aparelhos vulcânicos que estariam em actividade durante a sedimentação. Foram analisadas isotopicamente 27 amostras de metapelitos colhidas em 5 locais diferentes de forma a abranger quase toda a área estudada. Os dados isotópicos de quatro destes locais de amostragem forneceram isócronas Rb-Sr, em rocha total, com valores da ordem dos 400-440 Ma. O granito do Caramulo, datado pela isócrona Rb-Sr em amostras de rocha total, forneceu uma idade de 326±12Ma. As idades modelo Sm-Nd (manto empobrecido) de 5 amostras de metapelitos estão compreendidas entre 1.35 e 1.25 Ga. Este período de tempo pode ser considerado como correspondendo à época de diferenciação mantélica da crusta que deu lugar à maioria das áreas fonte dos metapelitos.

U-Pb geochronology and Nd isotope contributions to the interpretation of a peculiar ring massif: the Santa Eulália plutonic complex (SW Iberia, Portugal)

The Santa Eulalia plutonic complex (SEPC) is a late-Variscan granitic body placed in the Ossa-Morena Zone. The host rocks of the complex belong to metamorphic formations from Proterozoic to Lower Paleozoic. The SEPC is a ring massif (ca. 400 km2 area) composed by two main granitic facies with different colours and textures. From the rim to the core, there is (i) a peripheral pink medium- to coarse-grained granite (G0 group) involving large elongated masses of mafic and intermediate rocks, from gabbros to granodiorites (M group), and (ii) a central gray medium-grained granite (G1 group). The mafic to intermediate rocks (M group) are metaluminous and show wide compositions: 3.34–13.51 wt% MgO; 0.70–7.20 ppm Th; 0.84–1.06 (Eu/Eu*)N (Eu* calculated between Sm and Tb); 0.23–0.97 (Nb/Nb*)N (Nb* calculated between Th and La). Although involving the M-type bodies and forming the outer ring, the G0 granites are the most differentiated magmatic rocks of the SEPC, with a transitional character between metaluminous and peraluminous: 0.00–0.62 wt% MgO; 15.00–56.00 ppm Th; and 0.19–0.42 (Eu/Eu*)N ; 0.08–0.19 (Nb/Nb*)N [1][2]. The G1 group is composed by monzonitic granites with a dominant peraluminous character and represents the most homogeneous compositional group of the SEPC: 0.65–1.02 wt% MgO; 13.00–16.95 ppm Th; 0.57–0.70 (Eu/Eu*)N ; 0.14–0.16 (Nb/Nb*)N . According to the SiO2 vs. (Na2O+K2O–CaO) relationships, the M and G1 groups predominantly fall in the calc-alkaline field, while the G0 group is essencially alkali-calcic; on the basis of the SiO2 vs. FeOt/(FeOt+MgO) correlation, SEPC should be considered as a magnesian plutonic association [3]. New geochronological data (U-Pb on zircons) slightly correct the age of the SEPC, previously obtained by other methods (290 Ma, [4]). They provide ages of 306  2 Ma for the M group, 305  6 Ma for the G1 group, and 301  4 Ma for the G0 group, which confirm the late-Variscan character of the SEPC, indicating however a faintly older emplacement, during the Upper Carboniferous. Recent whole-rock isotopic data show that the Rb-Sr system suffered significant post-magmatic disturbance, but reveal a consistent set of Sm-Nd results valuable in the approach to the magmatic sources of this massif: M group (2.9 < Ndi < +1.8); G1 group (5.8 < Ndi < 4.6); G0 group (2.2 < Ndi < 0.8). These geochemical data suggest a petrogenetic model for the SEPC explained by a magmatic event developed in two stages. Initially, magmas derived from long-term depleted mantle sources (Ndi < +1.8 in M group) were extracted to the crust promoting its partial melting and extensive mixing and/or AFC magmatic evolution, thereby generating the G1 granites (Ndi < 4.6). Subsequently, a later extraction of similar primary magmas in the same place or nearby, could have caused partial melting of some intermediate facies (e.g. diorites) of the M group, followed by magmatic differentiation processes, mainly fractional crystallization, able to produce residual liquids compositionally close to the G0 granites (Ndi < 0.8). The kinetic energy associated with the structurally controlled (cauldron subsidence type?) motion of the G0 liquids to the periphery, would have been strong enough to drag up M group blocks as those occurring inside the G0 granitic ring.

Essai inter-analystes Ifremer pour l’évaluation de la qualité des connaissances en taxinomie et dénombrement du phytoplancton marin – Rapport d'évaluation des analystest du phytoplancton marin dans le cadre du REPHY

Les essais d'aptitude par comparaison inter-laboratoires ou inter-analystes sont utilisés pour évaluer les performances des laboratoires ou analystes sur des compétences spécifiques. Un exercice d’inter-comparaison international est organisé tous les ans par le Marine Institute Phytoplankton unit de Galway (Ireland), sous couvert du NMBAQC-BEQUALM, pour évaluer les performances en identification et en dénombrement du phytoplancton marin. La détermination des espèces phytoplanctoniques et l’estimation de leur abondance dans le cadre du Réseau d’observation et de surveillance du Phytoplancton et de l’Hydrologie, mis en oeuvre par l’Ifremer (REPHY) s’appuie sur 28 analystes, répartis dans 11 laboratoires. Onze d’entre eux ont été inscrits à titre individuel en 2015 pour participer à l’inter-comparaison réalisé par le Marine Institute de Galway (ICN-BEQUALM). Les échantillons envoyés aux analystes concernés ont été utilisés pour évaluer aussi les compétences des analystes non-inscrits à l’ICN-BEQUALM, mais réalisant également des analyses de phytoplancton dans ces mêmes laboratoires pour le REPHY. L’analyse statistique des résultats s’appuie sur la même mesure de performance que celle utilisée par le Marine Institute. Ce rapport décrit le déroulement de l’ICN-BEQUALM et de l’essai complémentaire Ifremer (EIA) et, présente seulement les résultats obtenus pour l’essai Ifremer. L'objectif est d'apporter des éléments à l'ensemble du personnel du REPHY afin d'entretenir une amélioration continue des pratiques et de déterminer des actions à mettre en oeuvre pour cette amélioration. En terme d'identification des taxa, les résultats reçus montrent que les analystes sont hautement qualifiés dans l'identification du phytoplancton marin et démontrent qu'il existe un consensus parmi les analystes sur la majorité des identifications des espèces présentes dans les échantillons de cet essai. Toutefois, des formations ciblées sur les espèces des genres Pseudo-nitszschia et Guinardia sont à envisager pour certains analystes. L'analyse des résultats des dénombrements obtenus cette année a mis principalement en évidence l'importance de la bonne application des protocoles et des instructions particulièrement en ce qui concerne la maitrise de la préservation des échantillons. Cette dernière, repose en grande partie sur les conditions ambiantes de stockage et sur les délais d'analyse. Les différents exercices d'inter-comparaison qui ont été menés jusqu'à présent apportent souvent des éléments différents et complémentaires. Ils s'intègrent dans la démarche qualité, et devront, avec leur pérennisation, attester des bonnes pratiques et de leur optimisation. L'Ifremer, prévoit donc de faire participer chaque année à l'ICN-BEQUALM un tiers des analystes du REPHY et continuer aussi l’évaluation des différents analystes.

Avaliação da radioatividade natural em mármores e granitos comerciais do estado do Espírito Santo

Tese (Doutorado em Tecnologia Nuclear)

The influence of environmental distraction on cognitive abilities in ADL performance after frontal brain injured.

Background: Previous studies have reported errors in Activities of Daily Living (ADL) under the presence of distracting objects in dementia and brain injury patients. However, little is known about which distractor-target objects relation might be more harmful for performance. Method: We compared the ADL execution in frontal brain injured patients and control participants under two conditions: One in which target objects were mixed with distractor objects that constituted an alternative semantically related but non-required task (contextual condition) and another in which target objects were mixed with related but isolated distractors that did not constituted a coherent task (non-contextual condition). We separately analyzed ADL commission errors (repetitions, substitutions, objects manipulations, failures in sequence, extra actions) and omissions. In addition, the participants were evaluated with a neuropsychological protocol including a very specific executive functions task (Selective attention, Stimulus-Stimulus and Stimulus-Response conflict). Results: We found that frontal patients produced more commission errors compared to control participants, but only under the contextual condition. No between groups significant differences were found in omissions in both conditions or commission errors in non-contextual conditions. Scores in the Stimulus-Response conflict was significantly correlated with commission errors in the contextual condition. Conclusion: The presence of different non-target objects in ADL performance could require different cognitive process. Contextual ADL conditions required a higher level of executive functions, especially at the level of response (Stimulus-Response conflict). Application to Practice: Occupational therapists should control the presence of objects related to the target task according to the intervention objectives with the patients.

Uso de resíduo e de minerais de pegmatito da região do seridó RN e de argilas portuguesas em formulações de grês porcelanato

In the State Rio Grande do Norte, Brazil, the most significant deposits of minerals in the production of granite and pegmatite are Seridó region. Municipalities of Parelhas and Equador are the main responsible for the production of feldspar, quartz, kaolin and granite. The ceramic industries are always in search of competitiveness by investing in new products or improving existing techniques. The stoneware is a type of pottery that stands in the market because it presents technical and aesthetic characteristics superior to other existing products. Characteristics of the raw materials initially obtained with chemical analysis and mineralogical analysis are crucial in getting a product that satisfies the conditions in a manufacturing process and is, in principle, directly related to the firing cycle. This research aimed at developing new formulations for the mass production of ceramic stoneware. The raw materials initially characterized were feldspar, quartz, kaolin and granite. As part of the research was developed at the University of Aveiro, in Portugal, we used two clays used in the production of Portuguese ceramics. The raw material Brazilian and Portuguese and the final product, both in Portugal and Brazil, were analyzed for X-ray fluorescence, X-ray diffraction, granulometric analysis, dilatometric analysis, thermal analysis and analysis of scanning electron microscopy (MEV). The specimens prepared at the University of Aveiro (DECV) were sintered at 10000C and 12000C and the specimens prepared in UFRN were sintered at 10000C, 10500C, 11000C, 11500C, 12000C, 12500C and 13000C, but the best results and demonstrating the presence of the mineral mullite were at temperatures of 12000C, 12500C and 13000C. The results showed that the granite waste used may be considered raw material of excellent quality for use in the ceramic industry and coating floors and more accurately by the industry of stoneware. Physical and mechanical tests conducted on samples of the formulations F01 and F02 developed in UFRN showed a water absorption and mechanical strength suitable for the stoneware

Estudo da potencialidade da incorporação de resíduo de granito e da queima da casca do café em cerâmica vermelha

The industrial production of ornamental rocks and the burning of coffee husk generate waste that is discarded into the environment. However, with the study of the incorporation of these residues in ceramic products, may be found an alternative to reducing environmental impacts and detrimental effects on human health caused by its indiscriminate disposal of waste in nature. Thus, this work aimed to study the addition of ashes of the coffee husk and granite residue in matrix of red ceramic. The raw materials were dry milled and sieved to mesh 100. To characterize the raw materials were carried out analyzes of X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis (PSA), differential thermal analysis (DTA) and thermogravimetric analysis (TG). Six formulations were prepared where the clay content was kept constant (70%wt) and ashes contents and granite residue varied from 10, 15, 20 and 30%. Dilatometrics analyzes were performed at four selected formulations, containing them: 100% clay (A100); 70% clay and 30% ashes (A70C30); 70% clay and 30% granite residue (A70G30); and 70% clay, 15% granite residue and 15% ashes (A70G15C15). The samples were prepared by uniaxial compaction with pressure of 25 MPa, and fired at temperatures of 800°C, 850ºC, 900ºC, 950ºC, 1000ºC and 1100°C. Assays were performed to determine the linear shrinkage of burning (LSB), water absorption (WA), apparent porosity (AP), density (D) and tensile bending. Also were performed analyzes of X-ray diffraction (XRD) and scanning electron microscopy (SEM) of the samples fired. The formulations incorporating granite residue and/or ashes reached the required limits of water absorption according to NBR 15270-1 and NBR 15310 and tensile bending according to classical literature (SANTOS, 1989) necessary for the production of tiles and ceramic block for masonry sealing

A habitação no turismo de natureza e de tradição

Dissertação para obtenção do grau de Mestre em Arquitectura, apresentada na Universidade de Lisboa - Faculdade de Arquitectura.

Avaliação do efeito da adição de resíduo de borracha de pneu e brita calcária na formulação de compósitos cimentíceos

Researches have shown that the introduction of rubber in concrete improves the features of its deformability, as well as contributes to environmental disposal of waste generated in the tire retreading process. Furthermore, there is a high availability of limestone within RN and CE country. Ignorance about this stone, does not allow its wide use as aggregate, leaving, this abundant supply idle. A composite of limestone gravel, with proportions of tire rubber waste which could be used as concrete would be an alternative to concrete for low applications. Therefore, this research aims to evaluate the characteristics of concrete containing limestone gravel and proportions of little aggregate replacement (sand) by tire rubber waste. To this goal, the material components of the concrete were characterized, concrete specimens with limestone gravel were made, from the dash 1.0: 2.5: 3.5, varying the water/cement ratio, and inserting a commercial plasticizer, without a proportion of residue, known as reference. From this, concrete with and without the presence of the additive in the same proportions were chosen, as well as these with the use of granite gravel, for being the most used. Selected the references, to these, replacements of little aggregate (sand) were added replaced by rubber waste from the tire retreading process, treated with 1M NaOH in proportions from 5.0 to 20.0 % by mass, cured and exposed to the semiarid environment. The results indicate the possibility of using limestone gravel in the concrete composition with workability correction using plasticizer. There was a decrease in the mechanical properties of the concrete with increments of waste rubber, but there is an improvement in toughness and deformability of the composite, which makes it interesting for the construction of non-structural concrete floors, as well as, the rubber waste delayed the hardening process, continuing to gain resistance after 28 days

Evolution of surface properties of ornamental granitoids exposed to high temperatures

Granite submitted to high temperatures may lead to the loss of aesthetic values even before structural damage is caused. Thirteen granitoids were exposed to target temperatures, 200 °C, 400 °C, 600 °C, 800 °C and 1000 °C. Damage characterisation, including roughness, colour and oxidation of chromogen elements by means of X-ray photoelectron spectroscopy (XPS) was assessed. Altered granitoids are more resistant to structural failure but redden rapidly. Black mica-rich granitoids turn into yellow with a maximum at 800 °C. Alkali feldspar-rich granitoids redden progressively due to iron oxidation. Roughness varies progressively in mica-rich granitoids, while in mica-poor granitoids, an increase in roughness precedes catastrophic failure.

Adapting Victorian Gypsies for the Screen: Ethnicity, Otherness and (In)visibility in Neo-Victorian Popular Film

This paper aims at analysing the presence of gypsy characters in two neo-Victorian popular films, namely Joe Johnston’s The Wolfman (2010) and Guy Ritchie’s Sherlock Holmes: Game of Shadows (2011). The cultural construction of nineteenth-century gypsies, those “Others within Europe” (Boyarin 433) whose presence in Victorian fiction was peripheral, spectral and at times invisible (Nord 3-4), is simultaneously exploited and contested by these two neo-Victorian screen narratives to raise issues of otherness and invisibility on the screen. Setting off from the premise that screen texts, just like print texts, can also be participant in the neo-Victorian project of reimagining the underside of Victorian culture for contemporary audiences (Whelehan 273), this paper traces how the adaptation of Victorian gypsies for the screen, true to the palimpsestuous potential inherent to the process of adaptation (Hutcheon 6) and sharing the double drive between past and present which characterises the neo-Victorian genre (Arias and Pulham xiii; Shiller 539), hybridises our cultural memory of the Victorian Age on the screen while concurrently raises concerns over the persistent liminal status of gypsies in contemporary European culture. In particular, this paper illustrates how the tropes prototypically associated to gypsies (namely their nomadic lifestyle, mysticism, alienated existence or their perceived association to criminality) which can be traced back to Victorian culture are deployed on the neo-Victorian popular screen (with varyingly succesful outcomes) to comment on their (in)visibility in the European popular imagination.