PREPARATION AND CHARACTERIZATION OF A MULTICYLINDER MICROELECTRODE COUPLED WITH A CONVENTIONAL GLASSY-CARBON ELECTRODE AND ITS APPLICATION TO THE DETECTION OF DOPAMINE

A multi-cylinder microelectrode coupled with a conventional glassy carbon disc electrode (MCM/GC) was prepared and characterized using cyclic voltammetry and chronoamperometry. It was demonstrated that in the same way as one observed a steady-state current at closely spaced microelectrodes when redox recycling takes place, the same effect can be obtained with the MCM/GC device. The experimental results obtained with K3Fe(CN)6 solutions were compared with a previously developed theory. Further, it was demonstrated that with a carbon fibre MCM/GC device, the voltammetric behaviour of dopamine is greatly improved by virtue of redox recycling, hence giving high sensitivity. The steady-state collection current was linearly related to dopamine concentration in the range 1 X 10(-4) to 5 x 10(-7) Mol l-1, and the detection limit was 2 x 10(-7) mol l-1. The influence of coexisting ascorbic acid was also investigated. This device was applied successfully in the determination of dopamine hydrochloride in pharmaceutical preparations.

EFFECTS OF DOPANT AND SOLVENT ON THE PROPERTIES OF POLYPYRROLE - INVESTIGATIONS WITH CYCLIC VOLTAMMETRY AND ELECTROCHEMICALLY INSITU CONDUCTIVITY

A new method for electrochemically in situ conductivity measurements based on a reusable glassy carbon disc carbon fibre array double electrode is described. Using this technique and cyclic voltammetry, we have investigated the effects of the doping anion and solvent on the electrochemical properties of polypyrrole film. The electroactivity and potential dependent conductivity of polypyrrole film are strongly affected by solvent and the doping anion's solubility in the solvent, and also by the history of electrochemical treatments in different electrolyte solutions. It is very interesting that NO3-doped polypyrrole can completely keep its conducting state (doped state) at a reasonably negative potential (eg -0.8 V vs. sce) in acetonitrile solutions.

THE ANODIC-OXIDATION OF HYDRAZINE ON GLASSY-CARBON ELECTRODE

The anodic oxidation kinetics of hydrazine (N2H4) on glassy carbon (GC) electrode was examined by cyclic voltammetry, rotating disk and ring-disc electrode techniques. The possible mechanisms of N2H4 oxidation in both aqueous and nonaqueous solutions are proposed.

ANODIC-OXIDATION OF HYDRAZINE ON GLASSY-CARBON MODIFIED BY MACROCYCLIC TRANSITION-METAL COMPLEXES .1. COBALT PROTOPORPHYRIN DIMETHYL ESTER MODIFIED ELECTRODE

The electrocatalytic oxidation of hydrazine (N2H4) on a glassy carbon electrode (GC) modified by monolayer and polymer films of cobalt protoporphyrin dimethyl ester (CoPP) has been studied. Both the monolayer and polymer films of CoPP are very active to the anodic oxidation of N2H4. The activity of CoPP for the anodic oxidation of N2H4 is dependent on the pH of the solution, and the thickness of polymerized CoPP film. The oxidation kinetics were examined by methods of cyclic voltammetry, rotating disc electrodes and steady-state polarization measurement.

Establishment of a micro-particle bombardment transformation system for Dunaliella saliva

In this study, we chronicle the establishment of a novel transformation system for the unicellular marine green alga, Dunaliella salina. We introduced the CaMV35S promoter-GUS construct into D. saliva with a PDS1000/He micro-particle bombardment system. Forty eight h after transformation, via histochemical staining, we observed the transient expression of GUS in D. salina cells which had been bombarded under rupture-disc pressures of 450 psi and 900 psi. We observed no GUS activity in either the negative or the blank controls. Our findings indicated that the micro-particle bombardment method constituted a feasible approach to the genetic transformation of D. salina. We also conducted tests of the cells' sensitivity to seven antibiotics and one herbicide, and our results suggested that 20 mu g/ ml of Basta could inhibit cell growth completely. The bar gene, which encodes for phosphinothricin acetyltransferase and confers herbicide tolerance, was introduced into the cells via the above established method. The results of PCR and PCR-Southern blot analyses indicated that the gene was successfully integrated into the genome of the transformants.

Transient expression of lacZ in particle bombarded Gracilaria changii (Gracilariales, Rhodophyta)

Using a Biolistic PDS 1000/He system, healthy thalli of Gracilaria changii were bombarded with gold particles coated with plasmid DNA containing the lacZ reporter gene. Transient expression of lacZ was observed in bombarded thalli under the rupture-disc pressures of 4482, 6206, 7584 and 8963 KPa, two days after bombardment. Although G. changii exhibits a slight blue background, positive expression and the background colour can be clearly differentiated. The results indicate that lacZ could be a useful reporter gene and that SV40 promoter could be an effective promoter for Gracilaria transformation.

Transient expression of lacZ in bombarded unicellular green alga Haematococcus pluvialis

This paper reports for the first time the transient expression of a reporter gene, LacZ, in the unicellular green alga Haematococcus pluvialis. By employing the micro-particle bombardment method, motile cells in the exponential phase showed transient expression of lacZ. This was detected in bombarded motile cells under the rupture-disc pressures of 3103 KPa and 4137 KPa. Transient expression of LacZ gene could not be observed in non-motile cells of this alga under the same transformation condition. No LacZ background was found in either the motile cells or the non-motile cells. The study suggests a promising potential of the SV40 promoter and the lacZ reporter gene in genetic engineering of unicellular green algae.

In vitro assembly of R-phycoerythrin from marine red alga Polysiphonia urceolata

Scanning tunneling microscope was used to investigate the in vitro assembly of R-phycoerythrin (R-PE) from the marine red alga Polysiphonia urceolata. The results showed that R-PE molecules assembled together by disc-to-disc while absorbing on HOPG surface, which just looked like the rods in the phycobilisomes. When the water-soluble R-PE was dissolved in 2% ethanol/water spreading solution, they could form monolayer film at the air/water interface. Similar disc-to-disc array of R-PE was constituted in the two-dimensional Langmuir-Blodgett film by the external force. It could be concluded that, apart from the key role of time linker polypeptides, the in vivo assembly of phycobiliproteins into phycobilisomes is also dependent on the endogenous properties of phycobiliprotein themselves.

Novel antifouling and antimicrobial compound from a marine-derived fungus Ampelomyces sp.

In this study, using a bioassay-guided isolation and purification procedure, we obtained 3-chloro-2,5-dihydroxybenzyl alcohol from a marine-derived Ampelomyces species that effectively inhibited larval settlement of the tubeworm Hydroides elegans and of cyprids of the barnacle Balanus amphitrite. The inhibitive effect on larval settlement was nontoxic and the EC50 of 3-chloro-2,5-dihydroxybenzyl alcohol ranged from 3.19 mu g ml(-1) to 3.81 mu g ml(-1) while the LC50 was 266.68 lambda g ml(-1) for B. amphitrite cyprids; EC50 ranged from 0.67 mu g ml(-1) to 0.78 mu g ml(-1), and LC50 was 2.64 mu g ml(-1) for competent larvae of H. elegans, indicating that inhibitive effect of this compound was nontoxic. At a concentration of 50 mu g per disc, this compound showed strong inhibitive effects on the growth of 13 out of 15 marine bacterial species tested in disc diffusion bioassay. Overall, the high inhibitory activities against bacteria and larval settlement as well as the non- or low-toxic nature of this compound to the barnacle and polychaete larvae suggest this compound could be a potent antifoulant and/or antibiotic.

Phyllophorus (Phyllophorus) maculatus, a new species of sea cucumber from the Yellow Sea (Echinodermata : Holothuroidea : Dendrochirotida)

Phyllophorus (Phyllophorus) maculatus new species is described from a depth of 22-45 meters near the western edge of the Yellow Sea. The body is cylindrical, with body wall ossicles present only in the anal region. Ossicles are four-pillared tables with low spires and indented disc margin. A revised key to the eleven phyllophorine (Family Phyllophoridae, Subfamily Phyllophorinae) species now known from China is presented.

Two trichodinid ectoparasites from marine molluscs in the Yellow Sea, off China, with the description of Trichodina caecellae n. sp (Protozoa : Ciliophora : Peritrichia)

The morphology and infraciliature of two ectoparasitic ciliates, Trichodina caecellae n. sp. and T. ruditapicis Xu, Song & Warren, 2000, parasitising the gills of marine molluscs from the Shandong coast of the Yellow Sea, China, were investigated following wet silver nitrate and protargol impregnation. T. caecellae was found on the small marine sand clam Caecella chinensis Deshayes and is distinguished mainly by the acute triangle-like blade, the very delicate central part and the needle-shaped ray. T. ruditapicis was studied based on four populations from three clams: two populations from Ruditapes philippinarum (Adams) and one each from Saxidomus purpuratus (Sowerby) and Solen grandis Dunker. All four populations fell within the range of morphometry and agreed closely in the overall appearance of the adhesive disc. However, variability was found in the denticle structure, especially in populations from different host clams. Our observations suggest that denticle morphology may be more or less variable between and within populations, and that such minor differences should not be overestimated. It should be emphasised that, except for the denticle morphology, the bright granules or circles in the centre of the adhesive disc represent another important feature facilitating the identification of this trichodinid species.

Trichodinid ectoparasites (Ciliophora, Peritrichia) from the tiger puffer Takifugu rubripes in the Yellow Sea, with revision of Trichodina jadranica Raabe,1958

Two ectoparasitic ciliates, Trichodina fugu Imai et al., 1997 and T. jadranica Raabe, 1958, found on the gills and skin of the maricultured tiger puffer Takifugu rubripes on the China coast of the Yellow Sea, were studied using the dry silver nitrate method. Trichodina fugu is distinguished by its almost rod-shaped denticle blades. Trichodina jadranica is usually described as a small trichodinid with a clear central circle in the adhesive disc and with a low number of denticles. However, the data available suggest that the species is highly variable in morphometry and the Chinese population represents the largest in body size and denticle dimensions found to date. Based on the revision of T. jadranica, two major morphotypes, each represented by several populations are classified, differing in the shape of the blades, viz., distinctly curved and sickle-shaped with pointed distal ends (as in the classical T. jadranica) vs. less curved and more or less rectangle-like with rounded distal ends (as in T. domerguei gobii). Trichodina domerguei gobii Raabe,.1959, which was synonymised with T. jadranica, is thus elevated to species rank. Furthermore, Trichodina jadranica noblei Lom, 1970 has straight and stout blades with broadly rounded distal ends and is raised to species rank: T noblei Lom, 1970. Trichodina jadranica sensu Xu et al., 1995 shows high similarities in denticle shape and dimensions as well as the central granule pattern with T chlamydis Xu et al., 1999. Thus, it is synonymised with the latter species.

摩擦圆盘运动分解合成机构的理论设计及其运动学分析

提出了一种摩擦圆盘运动分解合成机构,理论分析表明这种运动分解合成机构具有非完整约束性,通过建立其运动学微分方程,对这种机构的运动变化和传递关系进行了计算机仿真分析,表明该运动传递机构具有可控性,这为该运动分解合成机构的应用奠定了基础。

转子系统油膜振荡的小波包分解与频带能量比例特征分析

在介绍小波包分解原理的基础上 ,对试验测得的单盘单跨转子系统的油膜振荡非平稳信号用小波包分解方法进行了研究。采用db44小波基函数进行 4层小波包分解。给出了各频带内分解信号的特点及频带能量比例 ,其中第 3频带是该转子系统在 960 0r/min时产生油膜振荡的特征频带。得到的试验数据及其分析结果对转子系统油膜振荡研究和旋转机械状态监测等具有重要意义。

岩石磨蚀性和TBM滚刀磨损机理研究

Using the popular CERCHAR testing to measure the abrasiveness of rock which is CERCHAR abrasiveness index(CAI). The digital imagine processing program IPP is used to quantify the rock texture such as the grain size, the shape of grain and the index of grain homogeneity. And the rock mechanical testing machine are used to measure the strength, hardness and elastic modulus. Basic on these three experiments, this paper finds the relationship between the CAI and physical and mechanical properties of rock. They are both the mesostructure and macroscopical properties of rock. According to the theory of tribology and wear, this paper finds the disc cutter wear mechanism during the machine and rock interaction process. The detail research results are as follows: (1) The size and form of the mineral grains constituting the rocks affect the abrasiveness of the rock. The rock abrasiveness CAI is a function of the product of the texture coefficient(TC) multiplying equivalent quarts content(Q%). (2) There is no obvious relationship between the rock abrasiveness CAI and the single macroscopical property of rock such as hardness, unconfined compressive strength, tensile strength and elastic modulus. But when taking the texture coefficient(TC) and the mineral composition in consideration, it shows that the rock abrasiveness CAI is relative to the combination of the rock mechanical property, the texture coefficient(TC) and the mineral composition. That is to say various factors which are from the mesostructure feature to the macroscopical property of rock control the rock abrasiveness. (3) The disc cutter penetrating into rock is a machine/rock interaction process. During this interaction, the wear of disc cutter is mainly coming from the abrasive of abrasiveness matters. First, the surface of the cutter ring is hunched, and then the material of the cutter ring is being wiped off during the iterative interaction. Second, the hard mineral in the rock and the muck will microcosmic cutting the surface material of cutter ring. (4) The disc cutters consumption is determined by the machine parameters and the geology condition. The machine parameters include the thrust and the revolution rate of the cutterhead. The geology condition include two aspects: the macroscopical properties which are the strength and/or hardness of rock, the presence of discontinuities in rock mass, the hardness, sharp, edge and size of the muck and so on. And the mesostructure features which are the hard mineral composition, the sharp and size of the grain of the rock.