Dust-Cloud Structures behind a Shock Wave Moving Over a Deposited Layer of Fine Particles

The present paper investigates dispersed-phase flow structures of a dust cloud induced by a normal shock wave moving at a constant speed over a flat surface deposited with fine particles. In the shock-fitted coordinates, the general equations of dusty-gas

Earthquake Stability Analysis about Fine Grinded Tailings Dams

Based on the broken characteristics about earthquake to tailings dams, the earthquake stability analysis methods for tailings dams are introduced. Taking fine tailings dam in Longdu Tailings Pool as an example, the stability of the dam with various situations while earthquake with seven magnitude takes place there. The results can be used by Longdu Mine for tailings pool safety management.

A microstructural investigation of deformation in fine SiC particulate- and whisker-reinforced aluminium-matrix composites

Aluminium-based composites, reinforced with low volume fractions of whiskers and small particles, have been formed by a powder route. The materials have been tested in tension, and the microstructures examined using transmission electron microscopy. The whisker composites showed an improvement in flow stress over the particulate composites, and this was linked to an initially enhanced work-hardening rate in the whisker composites. The overall dislocation densities were estimated to be somewhat higher in the whisker composites than the particulate composites, but in the early stages of deformation the distribution was rather different, with deformation in the whisker material being far more localized and inhomogeneous. This factor, together with differences in the internal stress distribution in the materials, is used to explain the difference in mechanical properties.

Fine scale structures from deformation of aluminium containing small alumina particles

Microstructures and mechanical properties have been studied in aluminium containing a fine dispersion of alumina particles, deformed by cold-rolling to strains between 1.4 and 3.5. The microstructure was characterised by TEM. The deformation structures evolved very rapidly, forming a nanostructured material, with fine subgrains about 0.2 μm in diameter and a fraction of high-angle boundaries which was already high at a strain of 1.4, but continued to increase with rolling strain. The yield stress and ductility of the rolled materials were measured in tension, and properties were similar for all materials. Yield stress measurements were correlated with estimates made using microstructural models. The role of small particles in forming and stabilising the deformation structure is discussed. This nanostructured cold-deformed alloy has mechanical properties which are usefully enhanced at comparatively low cost. This gives it, and similar particle-strengthened alloys, good potential for commercial exploitation. © 2002 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.

Evaluación de producción de biomasa de Chloris gayana Kunth (Fine Cut) en la Cuenca del Salado

Resumen: El objetivo de este estudio fue evaluar el rendimiento de Chloris gayana Kunth (Grama Rhodes) cv. Fine Cut en relación con los rendimientos del campo natural. Este ensayo experimental se desarrolló en Verónica, Punta Indio, Provincia de Bs As. Las parcelas en donde se realizó el experimento fueron preparadas mediante labranza convencional. La siembra del cultivo se llevó a cabo el 4 Diciembre del 2009. Ésta se realizó en hileras distanciadas en 30cm y con una profundidad de 1cm. En cuanto al modelo experimental utilizado para la medición de biomasa de Chloris gayana Kunth cv. Fine Cut (con fertilización y sin fertilización), y de macollos, se utilizó un Diseño de Bloques al azar, (DBA), tomando como unidad elemental cada parcela con dos tratamientos. En el caso de la medición de biomasa de campo natural vs. Chloris gayana Kunth cv. Fine Cut no fertilizada se utilizó un Diseño Completamente Aleatorizado, (DCA), con tres repeticiones. Los datos obtenidos fueron analizados mediante un análisis de varianzas. El rendimiento de Chloris gayana superó al obtenido en el campo natural, (3548,44 Kg Ms ha‐1 vs. 8447,25 kg MS ha‐1 para campo natural y Chloris gayana, respectivamente). La aplicación de 75 kg de Nitrógeno incrementó la producción de Ch. gayana hasta los 14144,34 kg MS ha‐1. Estos rendimientos fueron obtenidos en un lapso de tiempo que va desde fines de diciembre del 2011 hasta mediados de abril del 2012 período en el cual se realizaron 4 cortes. En el cuarto año de producción (2012‐2013) la pastura no rebrotó, siendo las causas aparentes un anegamiento temporario junto con una posible helada que afectó su rebrote. Los datos recolectados sugieren que esta especie podría ser considerada como una alternativa interesante para el incremento de la producción primaria en este ambiente.

Coarse-to-fine vision-based localization by indexing scale-invariant features

This paper presents a novel coarse-to-fine global localization approach inspired by object recognition and text retrieval techniques. Harris-Laplace interest points characterized by scale-invariant transformation feature descriptors are used as natural landmarks. They are indexed into two databases: a location vector space model (LVSM) and a location database. The localization process consists of two stages: coarse localization and fine localization. Coarse localization from the LVSM is fast, but not accurate enough, whereas localization from the location database using a voting algorithm is relatively slow, but more accurate. The integration of coarse and fine stages makes fast and reliable localization possible. If necessary, the localization result can be verified by epipolar geometry between the representative view in the database and the view to be localized. In addition, the localization system recovers the position of the camera by essential matrix decomposition. The localization system has been tested in indoor and outdoor environments. The results show that our approach is efficient and reliable. © 2006 IEEE.

Dynamics Of Fine Particles In Liquid-Solid Fluidized Beds

On the basis of the Local Equilibrium Model (LEM), fine particles with large Richardson-Zaki exponent n show, under certain conditions during bed expansion and collapse, different dynamic behavior from particles with small n. For an expansion process there may be a concentration discontinuity propagating upward from the distributor, and, on the contrary, for a collapse process there may be a progressively broadening and upward-propagating continuous transition zone instead of discontinuity. The predictions of the bed height variation and the discontinuity trace have been validated experimentally. (c) 2007 Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

Novel experimental phenomena of fine-particle fluidized beds

The dynamic response of bed height and concentration waves in liquid-solid fluidized beds to a step change in the fluidization velocity is considered. We experimentally study the liquid-solid fluidized beds, spherical beadings, with sizes ranging from 230 to 270 mesh and the inner diameter of columns made from glass is 2.4 mm. Experimental results find that under certain conditions, fine particles with large Richardson-Zaki exponent n display different dynamic behavior from usual particles with smaller n during expansion and collapse of the fluidized state. (c) 2007 Elsevier Inc. All rights reserved.