Eficiência fotossintética de cultivares de cana-de-açúcar e de diferentes espécies de plantas daninhas após a aplicação do diuron

O objetivo deste trabalho foi avaliar a eficiência fotossintética, através da taxa de transporte de elétrons, de seis espécies de plantas daninhas e três cultivares de cana-de-açúcar após aplicação do herbicida diuron em pós-emergência inicial. Os cultivares utilizados (PO8862, SP80-3280 e RB83-5486) foram cortados em gemas e plantados em vasos com capacidade de 12 litros. A semeadura das seis espécies de plantas daninhas - Brachiaria decumbens, Digitaria horizontalis, Panicum maximum, Ipomoea grandifolia, Ipomoea hederifolia e Merremia cissoides - foi realizada para obter 25 plantas por vaso. A aplicação do herbicida diuron em pós-emergência inicial das plantas daninhas e dos cultivares de cana-de-açúcar foi realizada na dose de 3,0 kg ha-1, com adição de 0,2% de surfatante. As avaliações da taxa de transporte de elétrons no fotossistema (ETR) das plantas após a aplicação foram realizadas com auxílio de um fluorômetro portátil. Para as espécies de plantas daninhas, a ETR foi avaliada após intervalos de 2, 4, 24, 48, 72, 96 e 144 horas após a aplicação. Quanto aos cultivares de cana-de-açúcar, os intervalos avaliados foram de 2, 24, 48, 72, 120, 168 e 240 horas após a aplicação. de maneira geral, as reduções dos valores da ETR indicaram o nível de sensibilidade dos diferentes cultivares de cana-de-açúcar e das diferentes plantas daninhas ao diuron, e a intoxicação foi detectada antes ou mesmo sem a presença dos sintomas. A classificação da sensibilidade dos cultivares de cana-de-açúcar foi em ordem decrescente: PO-8862, SP80-3280 e RB83-5486; para as plantas daninhas, as espécies mais sensíveis foram M. cissoides, I. grandifolia e I. hederifolia, seguidas das gramíneas D. horizontalis, P. maximum e B. decumbens.

Eficácia do herbicida amicarbazone aplicado sobre a palha ou no solo no controle de plantas daninhas na cultura da cana-de-açúcar

A eficácia dos herbicidas no sistema de cana-crua é diretamente influenciada pela quantidade e distribuição de palha na área, bem como pela ocorrência da primeira chuva superior a 20 mm posterior à aplicação, uma vez que a palha é capaz de interceptar o herbicida antes que este atinja o solo. Nesse contexto, a presente pesquisa teve como objetivo avaliar a eficácia e o comportamento do herbicida amicarbazone no controle de plantas daninhas no sistema de cana-crua. Para isso, foi realizado um experimento em condições controladas, considerando diferentes doses de amicarbazone (D1 = 1,05 kg ha-1, D2 = 0,875 kg ha-1, D3 = 0,700 kg ha-1 e D4 = 0,525 kg ha-1) e situações de aplicação desse herbicida, a saber: sobre 5 t de palha ha-1, sobre o solo e coberto com 5 t de palha ha-1, além de pulverização sobre o solo sem cobertura de palha, resultando assim em 12 tratamentos. Aos 7, 14, 21 e 28 dias após a aplicação (DAA), foi avaliada a porcentagem de controle das seguintes espécies de plantas daninhas: Ipomoea grandifolia, Brachiaria decumbens, Merremia cissoides e Euphorbia heterophylla. Pelos resultados obtidos, pode-se constatar que, independentemente da espécie de planta daninha avaliada, os maiores índices de controle foram observados quando o amicarbazone foi aplicado sobre a palha, simulando-se em seguida precipitação correspondente a 30 mm de chuva, e nos tratamentos em que o herbicida foi aplicado diretamente no solo sem palha. Dessa forma, para as espécies I. grandifolia, M. cissoides e E. heterophylla, todos os tratamentos apresentaram excelente controle (nota 6 - 100%) a partir dos 14 DAA; para B. decumbens, o controle total ocorreu aos 28 DAA. Portanto, pode-se concluir que o amicarbazone é uma excelente alternativa para o manejo dessas espécies de plantas daninhas em cana-crua.

Relação entre o consumo de água e a absorção de herbicidas em plantas daninhas e cana-de-açúcar

O objetivo deste trabalho foi avaliar a relação entre o consumo de água pelas plantas de cana-de-açúcar e plantas daninhas e a absorção de herbicidas. O trabalho foi desenvolvido em dois experimentos: no primeiro, mediu-se o consumo de água através da pesagem diária das espécies de plantas daninhas Digitaria horizontalis, Panicum maximum, Ipomoea grandifolia, Ipomoea hederifolia, Brachiaria decumbens, assim como para os cultivares de cana-deaçúcar PO8862, SP80 3280 e RB83 5486; e, no segundo, foram determinadas as concentrações do amicarbazone, imazapic, tebuthiuron e hexazinone no xilema dos três cultivares de cana-deaçúcar e de I. grandifolia por meio da bomba de Schollander e de cromatografia e espectrometria de massas (LC-MS). A taxa de transpiração e, consequentemente, a taxa de consumo de água mostraram-se determinantes da taxa de absorção de herbicidas pelas plantas de diferentes espécies de plantas daninhas e cultivares de cana-de-açúcar. As concentrações de herbicidas na seiva do xilema foram variáveis em função da espécie e do herbicida em contato com o sistema radicular, indicando que a facilidade de absorção pelas raízes pode ser determinante para eficácia e/ou seletividade de herbicidas.

Avaliação da intoxicação de cultivares de cana-de-açúcar e I. grandifolia ao amicarbazone

O objetivo deste trabalho foi avaliar a intoxicação de planta daninha e cultivares de cana-de-açúcar ao amicarbazone. Para isso, utilizou-se Ipomoea grandifolia como planta daninha representante e os cultivares de cana-de-açúcar PO8862, SP80 3280 e RB83 5486, caracterizados como sensível, intermediário e tolerante aos herbicidas, respectivamente. Foi verificado o consumo de água e quantificada a concentração do amicarbazone em seiva de xilema dos três cultivares de cana-de-açúcar e de I. grandifolia por meio da bomba de Schollander e da cromatografia e espectrometria de massas (LC-MS). A intoxicação das plantas foi verificada através de leituras da fluorescência, com auxílio do fluorômetro portátil, que permitiu a correlação da taxa de transporte de elétrons (ETR) com a concentração de amicarbazone absorvido pelos cultivares de cana-de-açúcar e por I. grandifolia. Verificou-se, através do experimento, que a redução dos valores da ETR pode ser utilizada para indicar o nível de intoxicação de I. grandifolia e de plantas de cana-de-açúcar ao amicarbazone. I. grandifolia destacou-se em relação à cana-de-açúcar pela maior sensibilidade ao amicarbazone. A suscetibilidade diferencial dos cultivares de cana-de-açúcar PO8862, SP80 3280 e RB83 5486 pode ser justificada, possivelmente, pela absorção diferencial do amicarbazone entre os cultivares.

Fibras de sisal (Agave sisalana) como isolante térmico de tubulações

In the last decades there was a significant increasing of the numbers of researchers that joint efforts to find alternatives to improve the development of low environmental impact technology. Materials based on renewable resources have enormous potentials of applications and are seen as alternatives for the sustainable development. Within other parameters, the sustainability depends on the energetic efficiency, which depends on the thermal insulation. Alternative materials, including vegetal fibers, can be applied to thermal insulation, where its first goal is to minimize the loss of energy. In the present research, it was experimentally analyzed the thermal behavior of fiber blankets of sisal (Agave sisalana) with and without surface treatment with oxide hidroxide (NaOH). Blankets with two densities (1100/1200 and 1300/1400 g/m2) were submitted to three rates of heat transfer (22.5 W, 40 W and 62.5 W). The analysis of the results allowed comparing the blankets treated and untreated in each situation. Others experiments were carried out to obtain the thermal conductivity (k), heat capacity (C) and the thermal diffusivity (α) of the blankets. Thermo gravimetric analyses were made to the verification of the thermal stability. Based on the results it was possible to relate qualitatively the effect of the heat transfer through the sisal blankets subjected to three heat transfer rates, corresponding to three temperature values (77 °C, 112 °C e 155 °C). To the first and second values of temperature it was verified a considerable reduction on the rate of heat transfer; nevertheless, to the third value of temperature, the surface of the blankets (treated and untreated) in contact with the heated surface of the tube were carbonized. It was also verified, through the analyses of the results of the measurements of k, C e α, that the blankets treated and untreated have values near to the conventional isolating materials, as glass wool and rock wool. It could be concluded that is technically possible the use of sisal blankets as constitutive material of thermal isolation systems in applications where the temperature do not reach values greater than 112 ºC

Fibras de licuri: um reforço vegetal alternativo de compósitos poliméricos

This research is based, at first, on the seeking of alternatives naturals reinforced in place of polymeric composites, also named reinforced plastics. Therein, this work starts with a whole licuri fiber micro structural characterization, as alternative proposal to polymeric composites. Licuri fiber is abundant on the Bahia state flora, native from a palm tree called Syagrus Coronata (Martius) Beccari. After, it was done only licuri fiber laminar composite developing studies, in order to know its behavior when impregnated with thermofix resin. The composite was developed in laminar structure shape (plate with a single layer of reinforcement) and produced industrially. The layer of reinforcement is a fabric-fiber unidirectional of licuri up in a manual loom. Their structure was made of polyester resin ortofitálica (unsaturated) only reinforced with licuri fibers. Fiber characterization studies were based on physical chemistry properties and their constitution. It was made by tension, scanning electron microscopy (SEM), x-ray diffraction (RDX) and thermal analyses (TG and DTA) tests, besides fiber chemistry analyses. Relating their mechanical properties of strength and hardness testing, they were determined through unit axial tension test and flexion in three points. A study in order to know fiber/matrix interface effects, in the final composites results, was required. To better understand the mechanical behavior of the composite, macroscopic and microscopic optical analysis of the fracture was performed

Desenvolvimento de um compósito de espuma rígida de poliuretana de mamona e fibras de sisal para isolação térmica

The search for sustainable technologies that can contribute to reduce energy consumption is a great challenge in the field of insulation materials. In this context, composites manufactured from vegetal sources are an alternative technology. The principal objectives of this work are the development and characterization of a composite composed by the rigid polyurethane foam derived from castor oil (commercially available as RESPAN D40) and sisal fibers. The manufacture of the composite was done with expansion controlled inside a closed mold. The sisal fibers where used in the form of needlepunched nonwoven with a mean density of 1150 g/m2 and 1350 g/m2. The composite characterization was performed through the following tests: thermal conductivity, thermal behavior, thermo gravimetric analysis (TG/DTG), mechanical strength in compression and flexural, apparent density, water absorption in percentile, and the samples morphology was analyzed in a MEV. The density and humidity percentage of the sisal fiber were also determined. The thermal conductivity of the composites was higher than the pure polyurethane foam, the addition of nonwoven sisal fibers will become in a higher level of compact foam, reducing empty spaces (cells) of polyurethane, inducing an increase in k value. The apparent density of the composites was higher than pure polyurethane foam. In the results of water absorption tests, was seen a higher absorption percent of the composites, what is related to the presence of sisal fibers which are hygroscopic. From TG/DTG results, with the addition of sisal fibers reduced the strength to thermal degradation of the composites, a higher loss of mass was observed in the temperature band between 200 and 340 °C, related to urethane bonds decomposition and cellulose degradation and its derivatives. About mechanical behavior in compression and flexural, composites presented a better mechanical behavior than the rigid polyurethane foam. An increase in the amount of sisal fibers induces a higher rigidity of the composites. At the thermal behavior tests, the composites were more mechanically and thermally resistant than some materials commonly used for thermal insulation, they present the same or better results. The density of nonwoven sisal fiber had influence over the insulation grade; this means that, an increaser in sisal fiber density helped to retain the heat

Sorção de petróleo por fibras vegetais

Nowadays, when accidents with oil tanker or shore tanks occur and there is oil spill, some arrangements are made in order to repress and to fix the situation. For the containment, barriers or detours are usually made of synthetic materials such as polyurethane foam. In order to clear water away, techniques like in loco burning, biodegradant agents, dispersant agents and sorbent materials application are used. The most of the sorbent materials are also synthetic and they are used because it is easy to store them and their availability in market. This dissertation introduces the study of vegetable fibers of pineapple leaf fibers (Ananas comosus (L.) Merr.), cotton fibers (Gossypium herbaceum L.), kapok fibers (Ceiba pentandra (L.) Gaertn.), curauá fibers (Ananas erectifolius L.B. Sm.) and sisal fibers (Agave sisalana Perrine) related to their capacity of sorption of oil in case of accidental spill in the ocean. This work evaluates the substitution possibility of synthetic materials by natural biodegradable materials with less cost

Alterações morfológicas foliares em cultivares de cana-de-açúcar em resposta à deficiência hídrica

The aim of this study was to determine the response of morphological traits of four tolerant and susceptible sugarcane cultivars (SP81-3250, SP83-2847, RB855453 and RB72454) related to two water regimes. At 84 days after emergence the plants were submitted to water availability treatments (no water deficiency and water deficiency), and evaluated in three periods: zero, 28 and 56 days, after implantation of these treatments (DAT). The cultivars SP81-3250 and SP83-2847, when subjected to water stress for prolonged periods in early development, present higher leaf width, less damage to the green leaf number and leaf area, an increase in stomatal density in adaxial and abaxial leaf surface, and higher production of dry matter, and therefore were considered tolerant. The leaf +3 length not allowed to characterize the varieties to drought tolerance.

Aproveitamento de resíduos de cinza da cana de açúcar em massas cerâmicas

This study aimed to investigate the use of cane sugar ashes from small-scale stills of Eunápolis region, state of Bahia, in pottery mass that can be developed as porcelain stoneware. Bahia is the second largest producer of rum distillery in Brazil. In the production of rum is produced residue called bagasse, which is used to generate electricity in Power plants and in the distillery itself, generating ashes as residue, which is played in nature, causing environmental damage. We studied 5 (five) formulations of 0% 10% 20%, 30% and 40% by weight of the ash, without ignition and 3 (three) formulations of 10%, 20% and 30% with gray ash temperature of 1250ºC. The formulation at 0% by weight of ash was used for a comparison between the traditional mass of porcelain stoneware and the masses with the addition of ash calcined, replacing feldspar. The percentage by weight of kaolin and of Clay was kept the same, 30%, and all raw materials were derived from the state of Bahia. The samples were made in uniaxial array with dimensions of (60 x 20 x 5) mm and compressed to a pressure of 45 MPa. Assays were performed to characterize the raw by X-ray fluorescence, X-ray diffraction, ATD and ATG and Dilatometric analysis. The samples were sintered at temperatures of 1100°C, 1150°C, 1200°C and 1250°C, for the specimens with the ashes without ash and 1150° C and 1200° C for specimens with the gray level of calcined 60 minutes. and then we made a cooling ramp with the same rate of warming until reach ambient temperature. The sintered bodies were characterized by water absorption, porosity, linear shrinkage, bending strength and XRD of the fracture surface and the results analyzed. It was proven, after results of tests performed, that it is possible to use the ash residue of sugar cane bagasse on ceramic coating with the addition of up to 10% wt of the residue ash

Estudo da introdução de resíduo de britagem de rocha calcária e cinza de biomassa de cana-de-açúcar em formulações de argamassas colantes

The adhesive mortars are a mixture of cement, sand, and additives to polymers that retain the mixing water and promotes adherence, being used in setting on various ceramic substrates. The sand used in the production of these mortars is from the riverbeds, and with the increasing restriction of these sands extraction by environmental agencies, and often having to be transported over long distances to the consumer center. This work aims to design and physical and mechanical characterization of ecological adhesive mortar with total replacement of natural sand by sand from the crushing of limestone, and the addition of mineral ash biomass of cane sugar in partial replacement cement used in the production of adhesive mortar , aiming compositions that meet the regulatory specifications for use adhesive mortar. Standardized tests to determine the tensile bond strength (NBR 14081-4), determination of open time (NBR 14081-3) and determination of slip (NBR 14081-5) were performed. Were also conducted trials squeeze flow in different formulation, the mortar with addition of 15 % gray biomass of cane sugar for cement mortars as well as the total replacement of natural sand by sand limestone crushing, got the best performance among the mortars studied, it was found that the addition of biomass to replace cement is perfectly feasible due to its pozzolanic activity, which contributed to this reduction in the cement matrix formation of adhesive mortar

Efeito da adubação fosfata sobre o acúmulo de biomassa e teor de brix de duas variedades de cana-de-açúcar

The objective of this study was to evaluate the accumulation of matter, dry matter content of Brix and two varieties of sugar cane, influenced by the phosphorus cultivated on "Zona da Mata" region, State of Alagoas. The experiment, a factorial 2 x 6, was composed of two varieties of cane; RB867515 and RB92579 and six phosphorus levels: zero, 30, 60, 90, 120 and 150 kg ha(-1), with the source of the phosphorus triple superphosphate. Was also used nitrogen and potassium in doses equivalent to 100 and 200 kg ha(-1) and K, respectively. The soil of the experimental area was set to raise the base saturation to 60%. At the beginning of the first rainfall of the rainy season of 2006 was performed with micro fertilization in coverage, in doses equivalent to 6,0; 6,0 and 7,0 kg ha(-1) of Cu, Zn and Mn, respectively. Was The chemical control of weeds. Every month, from August to October 2006, samples were collected in the cane plant. There was initially the number of plants m(2), followed by weighing the material. It was subsequently withdrawn a subsample containing ten plants for weighing. After weighing the material was passed in horsemanship and homogenized, again drew up a sample of approximately 300g, leading them to forced ventilation oven at 65 degrees C, toobtain constant weight. Resulting in the production of natural (MN) and dry matter (DM). In July, we analyzed the levels of Brix% juice in the refractometer Brix. The average values of production of natural (MN), dry matter (DM) and contents of Brix% were subjected to analysis of variance and regression for variables. The accumulation of dry matter and were influenced by fertilization. The contents of Brix% in two varieties did not suffer significant influence of fertilization.

Desempenho mecânico de compósitos híbridos de fibras naturais e poliéster não saturado

With the objective to promote sustainable development, the fibres found in nature in abundance, which are biodegradable, of low cost in comparison to synthetic fibres are being used in the manufacture of composites. The mechanical behavior of the curauá and pineapple leaf fibre (PALF) composites in different proportions, 25% x 75% (P1), 50% x 50% (P2) e 75% x 25% (P3) were respectively studied, being initially treated with a 2% aqueous solution of sodium hydroxide. Mechanical analyses indicated that with respect to studies of traction, for the combination of P1 and P3, better results of 22.17 MPa and 16.98 MPa, were obtained respectively, which are higher than that of the combination P2. The results of the same pattern were obtained for analysis of bending resistance where P1 is 1.21% and P3 represents 0.96%. In the case of resistance to bending, best results were obtained for the combination P1 at 49.07 MPa. However, when Young's modulus values were calculated, the values were different to the pattern of the results of other tests, where the combination P2 with the value of 4.06 GPa is greater than the other combinations. This shows that the PALF had a greater influence in relation to curauá fibre. The analysis of the results generally shows that in combinations of two vegetable fibers of cellulosic origin, the fiber which shows higher percentage (75%) is the best option than to the composition of 50%/50%. In the meantime, according to the results obtained in this study, in the case where the application should withstand bending loads, the better composition would be 50%/50%

Estudo das propriedades mecânicas de biocompósitos de polipropileno reforçados com fibras naturais

This research presents an approach to the addition of curauá fibers and licuri fibers in a polypropylene resin matrix, such as an alternative proposal to reinforce the polymeric composites. Fiber content of 0 %, 5 %, 10 %, and 20% were analyzed for verification of their mechanical properties comparing them, inclusive with the properties of polypropylene. The grainulated biocomposites had been prepared in an extrusora. The test bodies had been molded by injection and submitted to the mechanical essays uniaxial traction, flexion on three points, impact, in addition to thermal tests (HDT). These biocomposites had been also subjected the essay physicist-chemistry index of fluidity (IF). It was observed that the biocomposites of PP with 20% curauá, obtained bigger increase in the modulus of elasticity and a bigger reduction in the resistance to the impact. In the mechanical behavior, for all the biocomposites, these were increases in values of the limit of drainage and tension of rupture, when tested by uniaxial traction, as they added the fibers. Another important point was the increase of the resistance the flexion. It was also noted that the addition of fibers reduced the thermal degradation of the mixture natural fibers / polypropylene.

Desenvolvimento de um laminado compósito híbrido a base de fibras de vidro/licurí

This research work is based, in search of reinforcement s vegetable alternative to polymer composites. The idealization of making a hybrid composite reinforced with vegetable fibers licuri with synthetic fibers is a pioneer in this area. Thus was conceived a hybrid composite laminate consisting of 05 (five) layers being 03 (three) webs of synthetic fibers of glass and E-02 (two) unidirectional fabrics of vegetable fibers licuri. In the configuration of the laminate layers have alternating distribution. The composite laminate was manufactured in Tecniplas Commerce & Industry LTD, in the form of a card through the manufacturing process of hand lay up. Licuri fibers used in making the foil were the City of Mare Island in the state of Bahia. After cooking and the idealization of the hybrid composite laminate, the objective of this research work has focused on evaluating the performance of the mechanical properties (ultimate strength, stiffness and elongation at break) through uniaxial tensile tests and three point bending. Comparative studies of the mechanical properties and as well as among other types of laminated hybrid composites studied previously, were performed. Promising results were found with respect to the mechanical properties of strength and stiffness to the hybridization process idealized here. To complement the entire study were analyzed in terms of macroscopic and microscopic characteristics of the fracture for all tests.