Síntese e caracterização de argilas pilarizadas com pilares mistos Al/Co

Two pillaring methods were tested to synthesize pillared clays containing mixed Al/Co pillars. Using the first method, based on the traditional procedure, were obtained materials containing different Co concentrations: 10, 25, 50, 75 and 100 % of Co in the pillaring solution. Just the experiments with low concentrations (10 and 25 % of Co) has formed pillared clays, whereas the sample with 25 % of cobalt showed best results compared with the one obtained just using Al as pillaring agent (basal spacing higher than 18 Å and surface area bigger than 300 m²/g). The 27Al NMR results pointed out the formation of mixed Al/Co pillars due to decreased between the intensities of AlVI/AlIV signals, indicating that the AlIV content decreased while Co content increased, suggesting the isomorphic substitution of Al atoms for Co in the Keggin ion structure (pillaring agent). For the samples containing 75 and 100 % of cobalt, it was verified the formation of others materials, which could be identified as hydrotalcite like compounds. The second pillarization method was named mixed layers, because the objective was to intercalate clay layers with hydrotalcite layers. Thus, after calcination, the hydrotalcite layers would dehydroxylate, resulting just in the metals oxides, intercalated between the clay sheets, thus generating, a pillared clay. For this purpose, were tested 4 synthesis procedures: physical mixture, mixture in water, ionic exchange under reflux and in situ synthesis. Of these, the method which showed the best results was the in situ synthesis, in which basal spacings of 14 Å (after calcination) were obtained, indicating that the samples are intercalated with metal oxides (Mg and Al). This procedure was reproduced with a Co-Al LDH (layered double hydroxide) and similar results were obtained, testifying the method reproducibility

O problema biobjetivo da árvore geradora quadrática em adjacência de arestas

The Quadratic Minimum Spanning Tree Problem (QMST) is a version of the Minimum Spanning Tree Problem in which, besides the traditional linear costs, there is a quadratic structure of costs. This quadratic structure models interaction effects between pairs of edges. Linear and quadratic costs are added up to constitute the total cost of the spanning tree, which must be minimized. When these interactions are restricted to adjacent edges, the problem is named Adjacent Only Quadratic Minimum Spanning Tree (AQMST). AQMST and QMST are NP-hard problems that model several problems of transport and distribution networks design. In general, AQMST arises as a more suitable model for real problems. Although, in literature, linear and quadratic costs are added, in real applications, they may be conflicting. In this case, it may be interesting to consider these costs separately. In this sense, Multiobjective Optimization provides a more realistic model for QMST and AQMST. A review of the state-of-the-art, so far, was not able to find papers regarding these problems under a biobjective point of view. Thus, the objective of this Thesis is the development of exact and heuristic algorithms for the Biobjective Adjacent Only Quadratic Spanning Tree Problem (bi-AQST). In order to do so, as theoretical foundation, other NP-hard problems directly related to bi-AQST are discussed: the QMST and AQMST problems. Bracktracking and branch-and-bound exact algorithms are proposed to the target problem of this investigation. The heuristic algorithms developed are: Pareto Local Search, Tabu Search with ejection chain, Transgenetic Algorithm, NSGA-II and a hybridization of the two last-mentioned proposals called NSTA. The proposed algorithms are compared to each other through performance analysis regarding computational experiments with instances adapted from the QMST literature. With regard to exact algorithms, the analysis considers, in particular, the execution time. In case of the heuristic algorithms, besides execution time, the quality of the generated approximation sets is evaluated. Quality indicators are used to assess such information. Appropriate statistical tools are used to measure the performance of exact and heuristic algorithms. Considering the set of instances adopted as well as the criteria of execution time and quality of the generated approximation set, the experiments showed that the Tabu Search with ejection chain approach obtained the best results and the transgenetic algorithm ranked second. The PLS algorithm obtained good quality solutions, but at a very high computational time compared to the other (meta)heuristics, getting the third place. NSTA and NSGA-II algorithms got the last positions

Comitês de grupamento aplicados a dados de expressão gênica

The main goal of this work is to investigate the suitability of applying cluster ensemble techniques (ensembles or committees) to gene expression data. More specifically, we will develop experiments with three diferent cluster ensembles methods, which have been used in many works in literature: coassociation matrix, relabeling and voting, and ensembles based on graph partitioning. The inputs for these methods will be the partitions generated by three clustering algorithms, representing diferent paradigms: kmeans, ExpectationMaximization (EM), and hierarchical method with average linkage. These algorithms have been widely applied to gene expression data. In general, the results obtained with our experiments indicate that the cluster ensemble methods present a better performance when compared to the individual techniques. This happens mainly for the heterogeneous ensembles, that is, ensembles built with base partitions generated with diferent clustering algorithms

Algoritmos de agrupamentos fuzzy intervalares e índice de validação para agrupamento de dados simbólicos do tipo intervalo

Symbolic Data Analysis (SDA) main aims to provide tools for reducing large databases to extract knowledge and provide techniques to describe the unit of such data in complex units, as such, interval or histogram. The objective of this work is to extend classical clustering methods for symbolic interval data based on interval-based distance. The main advantage of using an interval-based distance for interval-based data lies on the fact that it preserves the underlying imprecision on intervals which is usually lost when real-valued distances are applied. This work includes an approach allow existing indices to be adapted to interval context. The proposed methods with interval-based distances are compared with distances punctual existing literature through experiments with simulated data and real data interval

Parâmetro de regularização em problemas inversos: estudo numérico com a transformada de Radon

In general, an inverse problem corresponds to find a value of an element x in a suitable vector space, given a vector y measuring it, in some sense. When we discretize the problem, it usually boils down to solve an equation system f(x) = y, where f : U Rm ! Rn represents the step function in any domain U of the appropriate Rm. As a general rule, we arrive to an ill-posed problem. The resolution of inverse problems has been widely researched along the last decades, because many problems in science and industry consist in determining unknowns that we try to know, by observing its effects under certain indirect measures. Our general subject of this dissertation is the choice of Tykhonov´s regulaziration parameter of a poorly conditioned linear problem, as we are going to discuss on chapter 1 of this dissertation, focusing on the three most popular methods in nowadays literature of the area. Our more specific focus in this dissertation consists in the simulations reported on chapter 2, aiming to compare the performance of the three methods in the recuperation of images measured with the Radon transform, perturbed by the addition of gaussian i.i.d. noise. We choosed a difference operator as regularizer of the problem. The contribution we try to make, in this dissertation, mainly consists on the discussion of numerical simulations we execute, as is exposed in Chapter 2. We understand that the meaning of this dissertation lays much more on the questions which it raises than on saying something definitive about the subject. Partly, for beeing based on numerical experiments with no new mathematical results associated to it, partly for being about numerical experiments made with a single operator. On the other hand, we got some observations which seemed to us interesting on the simulations performed, considered the literature of the area. In special, we highlight observations we resume, at the conclusion of this work, about the different vocations of methods like GCV and L-curve and, also, about the optimal parameters tendency observed in the L-curve method of grouping themselves in a small gap, strongly correlated with the behavior of the generalized singular value decomposition curve of the involved operators, under reasonably broad regularity conditions in the images to be recovered

Desenvolvimento de dobras e falhas em ambiente distensional: Aplicação da modelagem física

The geological modeling allows, at laboratory scaling, the simulation of the geometric and kinematic evolution of geological structures. The importance of the knowledge of these structures grows when we consider their role in the creation of traps or conduits to oil and water. In the present work we simulated the formation of folds and faults in extensional environment, through physical and numerical modeling, using a sandbox apparatus and MOVE2010 software. The physical modeling of structures developed in the hangingwall of a listric fault, showed the formation of active and inactive axial zones. In consonance with the literature, we verified the formation of a rollover between these two axial zones. The crestal collapse of the anticline formed grabens, limited by secondary faults, perpendicular to the extension, with a curvilinear aspect. Adjacent to these faults we registered the formation of transversal folds, parallel to the extension, characterized by a syncline in the fault hangingwall. We also observed drag folds near the faults surfaces, these faults are parallel to the fault surface and presented an anticline in the footwall and a syncline hangingwall. To observe the influence of geometrical variations (dip and width) in the flat of a flat-ramp fault, we made two experimental series, being the first with the flat varying in dip and width and the second maintaining the flat variation in width but horizontal. These experiments developed secondary faults, perpendicular to the extension, that were grouped in three sets: i) antithetic faults with a curvilinear geometry and synthetic faults, with a more rectilinear geometry, both nucleated in the base of sedimentary pile. The normal antithetic faults can rotate, during the extension, presenting a pseudo-inverse kinematics. ii) Faults nucleated at the top of the sedimentary pile. The propagation of these faults is made through coalescence of segments, originating, sometimes, the formation of relay ramps. iii) Reverse faults, are nucleated in the flat-ramp interface. Comparing the two models we verified that the dip of the flat favors a differentiated nucleation of the faults at the two extremities of the mater fault. V These two flat-ramp models also generated an anticline-syncline pair, drag and transversal folds. The anticline was formed above the flat being sub-parallel to the master fault plane, while the syncline was formed in more distal areas of the fault. Due the geometrical variation of these two folds we can define three structural domains. Using the physical experiments as a template, we also made numerical modeling experiments, with flat-ramp faults presenting variation in the flat. Secondary antithetic, synthetic and reverse faults were generated in both models. The numerical modeling formed two folds, and anticline above the flat and a syncline further away of the master fault. The geometric variation of these two folds allowed the definition of three structural domains parallel to the extension. These data reinforce the physical models. The comparisons between natural data of a flat-ramp fault in the Potiguar basin with the data of physical and numerical simulations, showed that, in both cases, the variation of the geometry of the flat produces, variation in the hangingwall geometry

Estufas climatizadas para experimentos ambientais com rãs, em gaiolas

Foram construídas seis estufas climatizadas, instaladas inicialmente no Ranário Experimental da Universidade Federal de Viçosa (UFV) e, posteriormente, no Ranário Experimental da Fundação Universidade Federal do Rio Grande, com o objetivo de realizar experimentos para avaliar os efeitos do ambiente sobre o desempenho de rãs em gaiolas de fibra de vidro. Ambientes com temperaturas de 25ºC e fotoperíodo de 12/12 horas de luz/horas de escuridão (h L/E) serviram para adaptação das rãs por 15 dias antes de cada experimento. Os tratamentos consistiram em simular ambientes com temperaturas variando de 20 a 35ºC e fotoperíodos de 8/16, 12/12 e 16/8 h L/E. Foram realizados experimentos com rã-touro (Rana catesbeiana Shaw, 1802) e rã-manteiga (Leptodactylus ocellatus Linnaeus, 1758). Nessas estufas foi possível estimar que: a) os maiores ganhos de peso de rã-touro foram obtidos entre 27,6 e 29,7ºC, com melhor crescimento entre 28,2 e 30,1ºC; para rã-manteiga os melhores ganhos e conversão alimentar foram observados a 28,6 e 28ºC, respectivamente; b) a temperatura interage com fotoperíodo sobre o desempenho das rãs e seu desenvolvimento gonadal; c) a 27,7ºC (temperatura de conforto térmico) haverá menos rãs dentro d'água; d) a maior temperatura cloacal de rã-touro, 32,1ºC no seco e 33,8ºC dentro d'água, a 35ºC, evidenciou que as rãs se termorregulam; e) os níveis de tetraiodotironina (T4) no plasma decrescem na temperatura de conforto térmico; f) rã-manteiga condiciona-se ao manejo de rotina, reunindo-se ao redor do cocho na hora da alimentação.

Validação cruzada com correção de autovalores e regressão isotônica nos modelos de efeitos principais aditivos e interação multiplicativa

This paper presents an application of AMMI models - Additive Main effects and Multiplicative Interaction model - for a thorough study about the effect of the interaction between genotype and environment in multi-environments experiments with balanced data. Two methods of crossed validation are presented and the improvement of these methods through the correction of eigenvalues, being these rearranged by the isotonic regression. A comparative study between these methods is made, with real data. The results show that the EASTMENT & KRZANOWSKI (1982) method selects a more parsimonious model and when this method is improved with the correction of the eigenvalues, the number of components are not modified. GABRIEL (2002) method selects a huge number of terms to hold back in the model, and when this method is improved by the correction of eigenvalue, the number of terms diminishes. Therefore, the improvement of these methods through the correction of eigenvalues brings a great benefit from the practical point of view for the analyst of data proceeding from multi-ambient, since the selection of numbers of multiplicative terms represents a profit of the number of blocks (or repetitions), when the model AMMI is used, instead of the complete model.

Efeito de arilo na germinação de sementes de Passiflora alata curtis em diferentes substratos e submetidas a tratamentos com giberelina

O objetivo deste trabalho foi avaliar a germinação de sementes de Passiflora alata Curtis sob o efeito da presença de arilo em diferentes substratos de papel e submetidas a pré-tratamentos germinativos. Foram realizados dois experimentos (com e sem remoção de arilo), com delineamento experimental inteiramente casualizado, com 8 tratamentos e 5 repetições de 25 sementes, em esquema fatorial 2x4 (substratos x tratamentos pré-germinativos) para cada experimento. Os tratamentos foram constituídos pelos substratos (sobre papel em gerbox e entre papel em rolo) e tratamentos pré-germinativos (sementes embebidas em GA3 e água, papel de germinação umedecido com GA3 e água). Pode-se verificar que a germinação das sementes sem arilo foi maior, em substratos sobre papel ou entre papel, umedecidos com GA3.

Structural, functional, and bioinformatics studies reveal a new snake venom homologue phospholipase A(2) class

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Isolation and characterization of a satellite DNA family in Achirus lineatus (Teleostei : Pleuronectiformes : Achiridae)

Agarose gels stained with Ethidium bromide and Southern blot experiments of HindIII-digested genomic DNA of Achirus lineatus evidenced the presence of monomers and multimers of a DNA segment of about 200 bp, named here Al-HindIII sequence. No signals were observed in Southern blot experiments with genomic DNA of other flatfish species. The DNA sequencing of four recombinant clones showed that Al-HindIII sequences had 204 bp and were 63.72% AT-rich. FISH experiments using a Al-HindIII sequence as probe showed bright signals in the centromeric position of all chromosomes of A. lineatus.

Protective effects of beta-glucan extracted from barley against benzo[a]pyrene-induced DNA damage in hepatic cell HepG2

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Unpalatability of Hyla semilineata tadpoles (Anura) to captive and free-ranging vertebrate predators

This study examines the unpalatability of Hyla semilineata tadpoles, relating this possible defence mechanism to their black, presumably aposematic, colouration. Bullfrog tadpoles (Rana catesbeiana), similar in size to the H. semilineata larvae, were used as controls in the experiments. The palatability of H. semilineata tadpoles was tested by offering the tadpoles to Fish (Hoplias malabaricus), free-ranging passerine birds (Pitangus sulphuratus) and hawks (Buteo magnirostris), and domestic chickens (Gallus domesticus). All predators showed a significant preference towards the control R. catesbeiana tadpoles. However, in experiments with fish, this preference was not significant for tadpole capture, only for their ingestion, suggesting that the fish could not distinguish between the two species before tasting them. Although great kiskadees (P. sulphuratus) preferred the control R. catesbeiana tadpoles, they promptly ingested more than half of the test H. semilineata tadpoles when these were offered alone. The chickens, used as naive predators, clearly learned to avoid the black H. semilineata tadpoles after a few trials. The conspicuous colouration and unpalatability of H. semilineata tadpoles may benefit the individual as well as the group, depending on the predator involved.

Activation of Ca2+-independent membrane-damaging activity in Lys49-phospholipase A(2) promoted by amphiphilic molecules

Association of class-II phospholipase A(2) (PLA(2)) with aggregated phospholipid substrate results in elevated levels of the Ca2+-dependent hydrolytic activity. The Asp49 residue participates in coordination of the Ca2+ ion cofactor, however, in Lys49-PLA(2) homologues (Lys49-PLA(2)S), substitution of the Asp49 by Lys results in loss of Ca2+ binding and lack of detectable phospholipid hydrolysis. Nevertheless, Lys49-PLA2S cause Ca2+-independent damage of liposome membranes. Bothropstoxin-I is a homodimeric Lys49-PLA(2) from the venom of Bothrops jararacussu, and in fluorescent marker release and dynamic light scattering experiments with DPPC liposomes we demonstrate activation of the Ca2+-independent membrane damaging activity by similar to4 molecules of sodium dodecyl sulphate (SDS) per protein monomer. Activation is accomparlied by significant changes in the intrinsic tryptophan fluorescence emission (ITFE) and near UV circular dichroism (UVCD) spectra of the protein. Subsequent binding of 7-10 SDS molecules results in further alterations in the ITFE and far UVCD spectra. Reduction in the rate of N-bromosuccinimide modification of Trp77 at the dimer interface suggests that initial binding of SDS to this region accompanies the activation of the membrane damaging activity. 1-anilinonaphthalene-8-sulphonic acid binding studies indicate that subsequent SDS binding to the active site is concomitant with the second structural transition. These results provide insights in the structural basis of amphiphile/protein coupling in class-II PLA(2)s. (C) 2004 Published by Elsevier B.V.

An adapted thermal-gradient block for the germination of photoblastic seeds

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)