Sistema de gestão ambiental na produção de água mineral

It s more and more evident the subject of the shortage of water, worsened by the accelerated urbanization, growth of the population, increase of the demand and of the costs of its treatment, factors that are also tied up to the increase of the consumption of mineral waters, whose chemical composition or physical-chemistries characteristics do with that are considered beneficial to the health. The growth accelerated all over the world in its consumption aims the concern with the waters quality, the health and the incentive to the consumption of natural products. However, in spite of quite valuable, that resource is explored, most of the time, without optimization of production or actions that avoid wastefulness. This research is justified for the need of minimizing the negative environmental impacts caused by the mineral water s production, mainly in what it say about the generation of effluents and wastes in the productive process, through the study, development and application of cleaner production tools for the environmental management, pertinent for that section. The applicability of Environmental Management System was determined by means of the characterization of the environmental aspects of productive process in a company of the section, in the state of Rio Grande do Norte and of the discussion of the panoramas that demonstrate the tendency for a sustainable development. Actions as a reforestation, optimization of energy and water uses, recycle of solid residues and water reuse were applied during the research, resulting in the considerable reduction of wastes of raw materials and inputs and consequent environmental and economic won. A specific methodology was proposed with concepts of Environmental Management, integrating with Quality Management. As foundations for the elaboration of the methodology, it was realized a similarity analysis among the systems and, mainly, an analysis of the experiences observed in the case study, including specificities, needs and difficulties of the company. With these results, the implantation of a EMS as a company strategy has environmental, economic and social benefits, and this research can be applied and adequate to others companies and sectors

Relação entre características morfológicas e produção de leite em vacas da raça Gir

O objetivo deste trabalho foi determinar parâmetros genéticos relacionados a características morfológicas e suas correlações genéticas com a produção de leite, em vacas da raça Gir. Utilizaram-se 3.805 registros provenientes de 2.142 vacas. O modelo utilizado na análise de características morfológicas continha os efeitos fixos de rebanho, ano e estação de classificação, estádio da lactação e idade da vaca à classificação, além da identificação do classificador. Quanto à produção de leite, foram incluídos no modelo os efeitos fixos de rebanho, ano e estação de parição e idade da vaca ao parto. Os parâmetros genéticos foram obtidos por meio do aplicativo REMLF90. As estimativas de herdabilidade variaram de 0,09 a 0,54. A variabilidade genética aditiva da maioria das características é suficiente para que ganhos genéticos anuais significativos possam ser alcançados com o processo de seleção. As correlações genéticas entre as características morfológicas variaram de baixas a altas e, entre elas e a produção de leite, de baixas a moderadas. Altas correlações genéticas entre algumas características morfológicas implicam a possibilidade de exclusão de algumas delas do programa de melhoramento genético da raça Gir, no Brasil. As correlações genéticas entre produção de leite e algumas características morfológicas indicam que estas podem ser utilizadas na formação de índices de seleção.

Dedução de Funções de Alívio para Priorização de Variantes de Chaveamento Adequadas à Eliminação de Sobrecargas

Eventually, violations of voltage limits at buses or admissible loadings of transmission lines and/or power transformers may occur by the power system operation. If violations are detected in the supervision process, corrective measures may be carried out in order to eliminate them or to reduce their intensity. Loading restriction is an extreme solution and should only be adopted as the last control action. Previous researches have shown that it is possible to control constraints in electrical systems by changing the network topology, using the technique named Corrective Switching, which requires no additional costs. In previous works, the proposed calculations for verifying the ability of a switching variant in eliminating an overload in a specific branch were based on network reduction or heuristic analysis. The purpose of this work is to develop analytical derivation of linear equations to estimate current changes in a specific branch (due to switching measures) by means of few calculations. For bus-bar coupling, derivations will be based on short-circuit theory and Relief Function methodology. For bus-bar splitting, a Relief Function will be derived based on a technique of equivalent circuit. Although systems of linear equations are used to substantiate deductions, its formal solution for each variant, in real time does not become necessary. A priority list of promising variants is then assigned for final check by an exact load flow calculation and a transient analysis using ATP Alternative Transient Program. At last, results obtained by simulation in networks with different features will be presented

Estudo do aproveitamento de resíduo de gesso como carga para compósito com matriz de resina expansiva de mamona

In the execution of civil engineering works, either by wasting during the coating of wall or demolition of gypsum walls, the generation of the gypsum waste involves serious environmental concerns. These concerns are increased by the high demand of this raw material in the sector and by the difficulties of proper disposal byproduct generated. In the search for alternatives to minimize this problem, many research works are being conducted, giving emphasis in using gypsum waste as fillers in composites materials in order to improve the acoustic, thermal and mechanical performances. Through empirical testing, it was observed that the crystallization water contained in the residue (CaSO4.2H2O) could act like primary agent in the expanding of the polyurethane foam. Considering that polyurethane produced from vegetable oils are biodegradable synthetic polymers and that are admittedly to represent an alternative to petrochemical synthetic polyurethane, this research consist an analysis of the thermal behavior of a composite whose matrix obtained from a resin derived from the expansive castor oil seed, with loads of 4%, 8%, 12% and 16% of gypsum waste replacing to the polyol prepolymer blend. Contributors to this analysis: a characterization of the raw material through analysis of spectroscopy by Fourier transform infrared (FTIR), chemical analysis by X-Ray Fluorescence (XRF) and mineralogical analysis by X Ray Diffraction (XRD), complemented by thermo gravimetric analysis (TGA). In order to evaluate the thermo physical properties and thermal behavior of the composites manufactured in die closed with expansion contained, were also carried tests to determine the percentage of open pore volume using a gas pycnometer, scanning electronic microscopy (SEM), in addition to testing of flammability and the resistance to contact with hot surfaces. Through the analysis of the results, it appears that it is possible to produce a new material, which few changes in their thermo physical properties and thermal performance, promotes significant changes and attractive to the environment

Extração, caracterização e avaliação bioativa do extrato de Rumex acetosa

Studies show the great influence of free radicals and other oxidants as responsible for aging and degenerative diseases. On the other hand, the natural phenolic compounds has shown great as antioxidants to inhibit lipid peroxidation and lipoxygenase in vitro. Among these, is highlighted trans-resveratrol ( 3,5,4 `- trihydroxystilbene ) phenolic compound , characterized as a polyphenol stilbene class. The vegetables popularly known as "Azedinha" (Rumex Acetosa) has trans-resveratrol in its composition and from this, the present work aimed to study on the supercritical extraction and conventional extraction (Soxhlet and sequential) in roots of Rumex Acetosa, evaluating the efficiency of extractive processes, antioxidant activity, total phenolic content and quantification of trans-resveratrol contained in the extracts. Extractions using supercritical CO2 as solvent, addition of co-solvent (ethanol) and were conducted by the dynamic method in a fixed bed extractor. The trial met a 23 factorial design with three replications at the central point, with the variable reply process yield and concentration of trans-resveratrol and pressure as independent variables, temperature and concentration of co-solvent (% v/v). Yields ( mass of dry extract / mass of raw material used ) obtained from the supercritical extraction ranged from 0,8 to 7,63 % , and the best result was obtained at 250 bar and 90 °C using the co-solvent 15% ethanol (% v/v). The value was calculated for YCER a flow rate of 1,0 ± 0,17 g/min resulting in 0,0469 CO2 ( g solute / g solvent ). The results of the mass yield varied between conventional extractions 0,78 % ( hexane) and 9,97 % (ethanol). The statistical model generated from the data of the concentration of trans-resveratrol performed as meaningful and predictive for a 95% confidence. GC analysis on HPLC (High Performance Liquid Chromatography), transresveratrol was quantified in all extracts and concentration values ranged between 0,0033 and 0,42 ( mg / g extract) for supercritical extracts and between 0,449 and 17,046 (mg / g extract) to conventional extractions and therefore, the Soxhlet extraction with ethanol for more selective trans-resveratrol than the supercritical fluid. Evaluation of antioxidant (radical method to sequester 2,2- diphenyl-1- picryl - hydrazyl - DPPH) the supercritical extracts resulted in EC50 values (concentration effective to neutralize 50% of free radicals) of between 7,89 and 18,43 mg/mL , while resulting in a Soxhlet extraction with EC50 values in the range of 6,05 and 7,39 mg/mL. As for quantification of the phenolic compounds (Method Spectrophotometer Folin-Ciocalteau) the supercritical extracts resulted in values between 85,3 and 194,79 mg GAE / g extract, whereas values derived from the Soxhlet extract resulted in values between 178,5 and 237,8 mg GAE / g extract. The high antioxidant activity can not be attributed solely to the presence of phenolic compounds, but the presence of other antioxidants in the existing Rumex acetosa

Estudo da influência da temperatura na degradação termoquímica da biomassa de avelós

The bio-oil obtained from the pyrolysis of biomass has appeared as inter-esting alternative to replace fossil fuels. The aim of this work is to evaluate the influence of temperature on the yield of products originating from the pyrolysis process of the powder obtained from the dried twigs of avelós (Euphorbia tirucalli), using a rotating cylinder reactor in laboratory scale. The biomass was treated and characterized by: CHNS, moisture, volatiles, fixed carbon and ashes, as well as evaluation of lignin, cellulose and hemicellulose, besides other instrumental techniques such as: FTIR, TG/DTG, DRX, FRX and MEV. The activation energy was evaluated in non-isothemichal mode with heating rates of 5 and 10 oC/min. The obtained results showed biomass as feedstock with potential for biofuel production, because presents a high organic matter content (78,3%) and fixed-carbon (7,11%). The activation energy required for the degradation of biomass ranged between 232,92 392,84 kJ/mol, in the temperature range studied and heating rate of 5 and 10°C/min. In the pyrolysis process, the influence of the reaction temperature was studied (350-520 ° C), keeping constant the other variables, such as, the flow rate of carrier gas, the centrifugal speed for the bio-oil condensationa, the biomass flow and the rotation of the reactor. The maximum yield of bio-oil was obtained in the temperature of 450°C. In this temperature, the results achieved where: content of bio-oil 8,12%; char 32,7%; non-condensed gas 35,4%; losts 23,8%; gross calorific value 3,43MJ/kg; pH 4,93 and viscosity 1,5cP. The chromatographic analysis of the bio-oil produced under these conditions shows mainly the presence of phenol (17,71%), methylciclopentenone (10,56%) and dimethylciclopentenone (7,76%)

Estudo da influência da temperatura na degradação termoquímica da biomassa de avelós (euphorbia tirucalli Linn)

The bio-oil obtained from the pyrolysis of biomass has appeared as inter-esting alternative to replace fossil fuels. The aim of this work is to evaluate the influence of temperature on the yield of products originating from the pyrolysis process of the powder obtained from the dried twigs of avelós (Euphorbia tirucalli), using a rotating cylinder reactor in laboratory scale. The biomass was treated and characterized by: CHNS, moisture, volatiles, fixed carbon and ashes, as well as evaluation of lignin, cellulose and hemicellulose, besides other instrumental techniques such as: FTIR, TG/DTG, DRX, FRX and MEV. The activation energy was evaluated in non-isothemichal mode with heating rates of 5 and 10 oC/min. The obtained results showed biomass as feedstock with potential for biofuel production, because presents a high organic matter content (78,3%) and fixed-carbon (7,11%). The activation energy required for the degradation of biomass ranged between 232,92 392,84 kJ/mol, in the temperature range studied and heating rate of 5 and 10°C/min. In the pyrolysis process, the influence of the reaction temperature was studied (350-520 ° C), keeping constant the other variables, such as, the flow rate of carrier gas, the centrifugal speed for the bio-oil condensationa, the biomass flow and the rotation of the reactor. The maximum yield of bio-oil was obtained in the temperature of 450°C. In this temperature, the results achieved where: content of bio-oil 8,12%; char 32,7%; non-condensed gas 35,4%; losts 23,8%; gross calorific value 3,43MJ/kg; pH 4,93 and viscosity 1,5cP. The chromatographic analysis of the bio-oil produced under these conditions shows mainly the presence of phenol (17,71%), methylciclopentenone (10,56%) and dimethylciclopentenone (7,76%)

História da ciência como estratégia didática no ensino médio: um breve olhar de conteúdos da óptica

From a critique of aspects of the current teaching of physics, we propose in this paper an investigation into the conceptions of Nature of Science (NOS) submitted by students from the high school level, as well as the inclusion of discussions about some elements of NOS, through the History and Philosophy of Science, understanding them as facilitating strategy for more effective learning of Physics and, more specifically, the contents of optics. Based on the historical period corresponding to Greek antiquity to the mid-nineteenth century, built and applied a teaching unit to a high school class at the Federal Institute of Education, Science and Technology of Rio Grande do Norte (IFRN) Ipanguaçu campus. Our teaching unit involved the reading and interpretation of texts with historical content, observation and assembling five experimental activities, among other activities. Data analysis occurred through questionnaires investigative applied before and after the completion of the teaching unit, as well as questionnaires for content present in the texts. Although not significant, the results indicated that the application of the teaching unit allowed the (re) construction of some conceptions about NOS targets students present in our work, and contribute to a better learning content and greater optical science approach and its nature

Dynamics of inter-modality re-weighting during human postural control

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparação e mobilidade, equilíbrio corporal e desempenho muscular segundo a auto-eficácia para quedas em idosas

The aging process modifies various systems in the body, leading to changes in mobility, balance and muscle strength. This can cause a drop in the elderly, or not changing the perceived self-efficacy in preventing falls. Objective: To compare the mobility, body balance and muscle performance according to self-efficacy for falls in community-dwelling elderly. Methods: A cross-sectional comparative study with 63 older (65-80 years) community. Were evaluated for identification data and sociodemographic, cognitive screening using the Mini Mental State Examination (MMSE), effective for the fall of Falls Efficacy Scale International Brazil (FES-I-BRAZIL), Mobility through the Timed Up and Go Test , the balance Berg Balance Scale (BBS) and the Modified Clinical Test tests of Sensory Interaction on Balance (mCTSIB), tandem walk (TW) and Sit to Stand (STS) of the Balance Master® System. Finally, muscle performance by using isokinetic dynamometry. Statistical analysis was performed Student t test for comparison between groups, with p value ≤ 0.05. Results: Comparing the elderly with low-efficacy for falls with high-efficacy for falls, we found significant differences only for the variable Timed Up and Go Test (p = 0.04). With regard to data on balance tests were significant differences in the speed of oscillation firm surface eyes open modified Clinical Test of Sensory Interaction on Test of Balance (p = 0.01). Variables to isokinetic dynamometry were no significant differences in movement knee extension, as regards the variables peak torque (p = 0.04) and power (p = 0.03). Conclusion: The results suggest that, compared to older community with low-and high-efficacy for falls, we observed differences in variables related to mobility, balance and muscle function

The photothermal transparent transducer method applied to the spectroscopy of liquids

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Parâmetros sanguíneos de cavalos alimentados com concentrados lipídicos submetidos a treinos aeróbicos montados

Avaliou-se o fornecimento de concentrados com baixo e alto teor de óleo de soja a cavalos atletas, submetidos a duas intensidades de treinos aeróbicos montados, sobre a resposta metabólica de parâmetros bioquímicos do sangue, de importância ao desempenho esportivo. Foram utilizados quatro cavalos, em delineamento experimental quadrado latino, com tratamentos em esquema fatorial 2x2 (duas inclusões de óleo de soja e duas rotinas de treinos aeróbicos). Os tratamentos foram compostos por teores de 5 e 15% de óleo de soja nos concentrados e duas intensidades de treinos montados por 40 e 60min, classificadas como aeróbicas. As amostras de sangue foram colhidas após o último treino de 40 ou 60min, de cada período experimental. Monitorou-se, após o exercício, os parâmetros bioquímicos, triglicerídeos (TG), colesterol total (CT), glicose (GLI) e lactato (LAC). Houve redução no teor TG (P<0,05) para cavalos consumindo 15% de óleo e treinados aerobicamente por 60 min., o CT elevou-se em função do aumento da inclusão de óleo (P<0,05), incremento LAC (P<0,05) em cavalos treinados por 60min., independente do nível de óleo ingerido (1,48mmol/L), bem como não se verificou efeito (P>0,05) dos tratamentos sobre GLI. Concluiu-se que, para cavalos atletas em atividade aeróbica, o oferecimento de concentrado com alto teor óleo de soja deve ser associado ao treino montado de maior intensidade.

Evaluation of tissue reaction to Aroeira (Myracrodruon urundeuva) extracts: a histologic and edemogenic study

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Primary Tooth Enamel Loss After Manual and Mechanical Microabrasion

Purpose: This study's purpose was to assess the amount of dental enamel loss on primary incisors after manual or mechanical microabrasion with a phosphoric acid/pumice poste. Methods: Ten exfoliated primary maxillary incisors were bisected faciolingually and the resulting 20 halves were randomly assigned to 2 groups: group 1 (N=10) manual technique (plastic spatula); and group 2 (N=10) mechanical technique (rubber cup attached to a low-speed handpiece). Microabrasion was performed on the buccal surface using an abrasive paste prepared with 37% phosphoric acid and pumice. Ten 20-second applications alternated with 20-second risings were performed in each group. Enamel thickness measurements made under stereomi-croscopy before and after microabrasion were analyzed statistically by analysis of variance and pairwise t test. Results: There was a statistically significant difference (P=.003) between the manual and mechanical techniques. The mechanical technique produced a mean enamel loss of 274.16 mu m (66% of total enamel thickness), while the mean enamel loss with the manual technique was 152.59 mu m (39% of total enamel thickness). Conclusion: Manual microabrasion using a plastic spatula removed less enamel, but was sufficient to eliminate most superficial stains and defects, and may be a viable option for the microabrasive technique on primary teeth. (Pediatr Dent 2008;30:420-3) Received March 15, 2007 / Lost Revision September 19, 2007 / Revision Accepted October 19, 2007

The influence of initial feeding on muscle development and growth in pacu Piaractus mesopotamicus larvae

The effects of different feeding schemes on pacu Piaractus mesopotamicus early development were evaluated with respect to growth, survival, muscle development, and differential gene expression of MyoD and myogenin. The pacu larvae (4 days post hatch-dph, 0.77 mg wet weight) were given six feeding treatments intentionally designed to cause variations in the larvae growth rate: (A) only artemia nauplii; (CD) only a commercial diet; (ED) only a semi-purified experimental diet; (ACD) and (AED) two treatments that involved weaning; and (S) starvation. Early weaning from artemia nauplii to the formulated diets (ACD and AED) affected growth and survival of the pacu larvae compared with the exclusive use of artemia (A). Starvation (S) and the commercial diet (CD) caused total mortality in pacu larvae at 18 dph. The experimental diet (ED) assured low fish survival and growth. The skeletal muscle morphology was not affected by the delay in somatic growth from early weaning onto the formulated diets. Three distinct muscle compartments were observed throughout the larval development in treatments A, ACD and AED: superficial, deep and intermediate, accompanied by muscle thickening. Severe undernourishment caused drastic differences in growth and in the morphology of the muscle fibers. Pacu larvae fed only formulated diets (CD and ED) showed muscle characteristics similar to the larvae in starvation (S) during the first 15 dph. At 27 and 35 dph, a slight increase in epaxial muscle mass was noted in larvae fed only the experimental diet (ED). At 35 dph, we observed a high frequency of fibers >= 40 mu m in the larvae that were weaned onto the formulated diets (ACD and AED), indicative of hypertrophy. In contrast, the larvae fed only artemia nauplii (A) displayed a larger number of fibers with diameters <= 20 mu m, which is indicative of hyperplasia. The expression of the MyoD and myogenin genes in pacu larvae at 35 dph was not affected by initial feeding (p>0.05). In conclusion, the formulated diets used impaired pacu larvae growth and survival; therefore, they were inadequate for pacu, at least at the times they were introduced. Artemia nauplii were the most adequate food source during first feeding of the pacu, and they produced bigger fish upon completion of the experiment. Moreover, the contribution of hyperplasia to the skeletal muscle growth appeared higher in fast- than in slow-growing pacu larvae. (C) 2011 Elsevier By. All rights reserved.