Predicting chick body mass by artificial intelligence-based models

The objective of this work was to develop, validate, and compare 190 artificial intelligence-based models for predicting the body mass of chicks from 2 to 21 days of age subjected to different duration and intensities of thermal challenge. The experiment was conducted inside four climate-controlled wind tunnels using 210 chicks. A database containing 840 datasets (from 2 to 21-day-old chicks) - with the variables dry-bulb air temperature, duration of thermal stress (days), chick age (days), and the daily body mass of chicks - was used for network training, validation, and tests of models based on artificial neural networks (ANNs) and neuro-fuzzy networks (NFNs). The ANNs were most accurate in predicting the body mass of chicks from 2 to 21 days of age after they were subjected to the input variables, and they showed an R² of 0.9993 and a standard error of 4.62 g. The ANNs enable the simulation of different scenarios, which can assist in managerial decision-making, and they can be embedded in the heating control systems.

Accounting system for activity standard costs formulation in ERP environment

Toiminnanohjausjärjestelmän implementointi ja sen mukanaan tuomat muutokset tuotekustannuslaskentaan asettavat haasteita yritykselle. Metallitoimialalla toimivassa yrityksessä on havaittu samat haasteet implementoitaessa SAP R/3 toiminnanohjausjärjestelmää ja sen tuotekustannuslaskentatoiminnallisuutta. SAP R/3 tuotekustannuslogiikka tarvitsee tietoa järjestelmän ulkopuolelta, minkä huomioimatta jättäminen vaikuttaa suoraan laskentatarkkuuteen. Diplomityössä kehitetään sekä standardoitu prosessi että laskentajärjestelmä, joiden avulla pystytään laskemaan tarvittavat niin toimintokustannukset eri teräspalvelukeskuksen kuormituspisteille kuin kustannustenvyörytysarvot. Lasketut arvot muodostavat tarvittavat tekijät SAP R/3 tuotekustannuslaskennan master dataan. Tavoitteena on edesauttaa läpinäkyvän kustannustiedon muodostumista. Diplomityö pohjautuu ns. vesiputousmalliin (SDLC). Ensin tunnistetaan reunaehdot ympäristöstä, jossa tuotekustannuslaskenta toteutetaan. Tämä asettaa joustamattomia komponentteja kehitettävälle laskentajärjestelmälle. Joustavat komponentit sen sijaan antavat vapautta laskentajärjestelmälle. Yhdistämällä joustamattomat ja joustavat komponentit saavutetaan järjestelmä, jolla voidaan täydentää SAP R/3 tuotekustannuslaskennan puutteellisuutta.

Effective corporate governance : experimental evidence on international auditors'judgments and the contribution of financial accounting education

1 Summary This dissertation deals with two major aspects of corporate governance that grew in importance during the last years: the internal audit function and financial accounting education. In three essays, I contribute to research on these topics which are embedded in the broader corporate governance literature. The first two essays consist of experimental investigations of internal auditors' judgments. They deal with two research issues for which accounting research lacks evidence: The effectiveness of internal controls and the potentially conflicting role of the internal audit function between management and the audit committee. The findings of the first two essays contribute to the literature on internal auditors' judgment and the role of the internal audit function as a major cornerstone of corporate governance. The third essay theoretically examines a broader issue but also relates to the overall research question of this dissertation: What contributes to effective corporate governance? This last essay takes the perspective that the root for quality corporate governance is appropriate financial accounting education. r develop a public interest approach to accounting education that contributes to the literature on adequate accounting education with respect to corporate governance and accounting harmonization. The increasing importance of both the internal audit function and accounting education for corporate governance can be explained by the same recent fundamental changes that still affect accounting research and practice. First, the Sarbanes-Oxley Act of 2002 (SOX, 2002) and the 8th EU Directive (EU, 2006) have led to a bigger role for the internal audit function in corporate governance. Their implications regarding the implementation of audit committees and their oversight over internal controls are extensive. As a consequence, the internal audit function has become increasingly important for corporate governance and serves a new master (i.e. the audit committee) within the company in addition to management. Second, the SOX (2002) and the 8th EU Directive introduced additional internal control mechanisms that are expected to contribute to the reliability of financial information. As a consequence, the internal audit function is expected to contribute to a greater extent to the reliability of financial statements. Therefore, effective internal control mechanisms that strengthen objective judgments and independence become important. This is especially true when external- auditors rely on the work of internal auditors in the context of the International Standard on Auditing (ISA) 610 and the equivalent US Statement on Auditing Standards (SAS) 65 (see IFAC, 2009 and AICPA, 1990). Third, the harmonization of international reporting standards is increasingly promoted by means of a principles-based approach. It is the leading approach since a study of the SEC (2003) that was required by the SOX (2002) in section 108(d) was in favor of this approach. As a result, the Financial Accounting Standards Board (FASB) and the International Accounting Standards Board (IASB) commit themselves to the development of compatible accounting standards based on a principles-based approach. Moreover, since the Norwalk Agreement of 2002, the two standard setters have developed exposure drafts for a common conceptual framework that will be the basis for accounting harmonization. The new .framework will be in favor of fair value measurement and accounting for real-world economic phenomena. These changes in terms of standard setting lead to a trend towards more professional judgment in the accounting process. They affect internal and external auditors, accountants, and managers in general. As a consequence, a new competency set for preparers and users of financial statements is required. The basil for this new competency set is adequate accounting education (Schipper, 2003). These three issues which affect corporate governance are the initial point of this dissertation and constitute its motivation. Two broad questions motivated a scientific examination in three essays: 1) What are major aspects to be examined regarding the new role of the internal audit function? 2) How should major changes in standard setting affect financial accounting education? The first question became apparent due to two published literature reviews by Gramling et al. (2004) and Cohen, Krishnamoorthy & Wright (2004). These studies raise various questions for future research that are still relevant and which motivate the first two essays of my dissertation. In the first essay, I focus on the role of the internal audit function as one cornerstone of corporate governance and its potentially conflicting role of serving both management and the audit committee (IIA, 2003). In an experimental study, I provide evidence on the challenges for internal auditors in their role as servant for two masters -the audit committee and management -and how this influences internal auditors' judgment (Gramling et al. 2004; Cohen, Krishnamoorthy & Wright, 2004). I ask if there is an expectation gap between what internal auditors should provide for corporate governance in theory compared to what internal auditors are able to provide in practice. In particular, I focus on the effect of serving two masters on the internal auditor's independence. I argue that independence is hardly achievable if the internal audit function serves two masters with conflicting priorities. The second essay provides evidence on the effectiveness of accountability as an internal control mechanism. In general, internal control mechanisms based on accountability were enforced by the SOX (2002) and the 8th EU Directive. Subsequently, many companies introduced sub-certification processes that should contribute to an objective judgment process. Thus, these mechanisms are important to strengthen the reliability of financial statements. Based on a need for evidence on the effectiveness of internal control mechanisms (Brennan & Solomon, 2008; Gramling et al. 2004; Cohen, Krishnamoorthy & Wright, 2004; Solomon & Trotman, 2003), I designed an experiment to examine the joint effect of accountability and obedience pressure in an internal audit setting. I argue that obedience pressure potentially can lead to a negative influence on accountants' objectivity (e.g. DeZoort & Lord, 1997) whereas accountability can mitigate this negative effect. My second main research question - How should major changes in standard setting affect financial accounting education? - is investigated in the third essay. It is motivated by the observation during my PhD that many conferences deal with the topic of accounting education but very little is published about what needs to be done. Moreover, the Endings in the first two essays of this thesis and their literature review suggest that financial accounting education can contribute significantly to quality corporate governance as argued elsewhere (Schipper, 2003; Boyce, 2004; Ghoshal, 2005). In the third essay of this thesis, I therefore focus on approaches to financial accounting education that account for the changes in standard setting and also contribute to corporate governance and accounting harmonization. I argue that the competency set that is required in practice changes due to major changes in standard setting. As the major contribution of the third article, I develop a public interest approach for financial accounting education. The major findings of this dissertation can be summarized as follows. The first essay provides evidence to an important research question raised by Gramling et al. (2004, p. 240): "If the audit committee and management have different visions for the corporate governance role of the IAF, which vision will dominate?" According to the results of the first essay, internal auditors do follow the priorities of either management or the audit committee based on the guidance provided by the Chief Audit executive. The study's results question whether the independence of the internal audit function is actually achievable. My findings contribute to research on internal auditors' judgment and the internal audit function's independence in the broader frame of corporate governance. The results are also important for practice because independence is a major justification for a positive contribution of the internal audit function to corporate governance. The major findings of the second essay indicate that the duty to sign work results - a means of holding people accountable -mitigates the negative effect of obedience pressure on reliability. Hence, I found evidence that control .mechanisms relying on certifications may enhance the reliability of financial information. These findings contribute to the literature on the effectiveness of internal control mechanisms. They are also important in the light of sub-certification processes that resulted from the Sarbanes-Oxley Act and the 8th EU Directive. The third essay contributes to the literature by developing a measurement framework that accounts for the consequences of major trends in standard setting. Moreovér, it shows how these trends affect the required .competency set of people dealing with accounting issues. Based on this work, my main contribution is the development of a public interest approach for the design of adequate financial accounting curricula. 2 Serving two masters: Experimental evidence on the independence of internal auditors Abstract Twenty nine internal auditors participated in a study that examines the independence of internal auditors in their potentially competing roles of serving two masters: the audit committee and management. Our main hypothesis suggests that internal auditors' independence is not achievable in an institutional setting in which internal auditors are accountable to two different parties with potentially differing priorities. We test our hypothesis in an experiment in which the treatment consisted of two different instructions of the Chief audit executive; one stressing the priority of management (cost reduction) and one stressing the priority of the audit committee (effectiveness). Internal auditors had to evaluate internal controls and their inherent costs of different processes which varied in their degree of task complexity. Our main results indicate that internal auditors' evaluation of the processes is significantly different when task complexity is high. Our findings suggest that internal auditors do follow the priorities of either management or the audit committee depending on the instructions of a superior internal auditor. The study's results question whether the independence of the internal audit function is actually achievable. With our findings, we contribute to research on internal auditors' judgment and the internal audit function's independence in the frame of corporate governance.

Image-Based Coral Reef Classification and Thematic Mapping

This paper presents a novel image classification scheme for benthic coral reef images that can be applied to both single image and composite mosaic datasets. The proposed method can be configured to the characteristics (e.g., the size of the dataset, number of classes, resolution of the samples, color information availability, class types, etc.) of individual datasets. The proposed method uses completed local binary pattern (CLBP), grey level co-occurrence matrix (GLCM), Gabor filter response, and opponent angle and hue channel color histograms as feature descriptors. For classification, either k-nearest neighbor (KNN), neural network (NN), support vector machine (SVM) or probability density weighted mean distance (PDWMD) is used. The combination of features and classifiers that attains the best results is presented together with the guidelines for selection. The accuracy and efficiency of our proposed method are compared with other state-of-the-art techniques using three benthic and three texture datasets. The proposed method achieves the highest overall classification accuracy of any of the tested methods and has moderate execution time. Finally, the proposed classification scheme is applied to a large-scale image mosaic of the Red Sea to create a completely classified thematic map of the reef benthos

Computational Analysis and Optimization of Real Gas Flow In Small Centrifugal Compressors

Small centrifugal compressors are more and more widely used in many industrialsystems because of their higher efficiency and better off-design performance comparing to piston and scroll compressors as while as higher work coefficient perstage than in axial compressors. Higher efficiency is always the aim of the designer of compressors. In the present work, the influence of four partsof a small centrifugal compressor that compresses heavy molecular weight real gas has been investigated in order to achieve higher efficiency. Two parts concern the impeller: tip clearance and the circumferential position of the splitter blade. The other two parts concern the diffuser: the pinch shape and vane shape. Computational fluid dynamics is applied in this study. The Reynolds averaged Navier-Stokes flow solver Finflo is used. The quasi-steady approach is utilized. Chien's k-e turbulence model is used to model the turbulence. A new practical real gas model is presented in this study. The real gas model is easily generated, accuracy controllable and fairly fast. The numerical results and measurements show good agreement. The influence of tip clearance on the performance of a small compressor is obvious. The pressure ratio and efficiency are decreased as the size of tip clearance is increased, while the total enthalpy rise keeps almost constant. The decrement of the pressure ratio and efficiency is larger at higher mass flow rates and smaller at lower mass flow rates. The flow angles at the inlet and outlet of the impeller are increased as the size of tip clearance is increased. The results of the detailed flow field show that leakingflow is the main reason for the performance drop. The secondary flow region becomes larger as the size of tip clearance is increased and the area of the main flow is compressed. The flow uniformity is then decreased. A detailed study shows that the leaking flow rate is higher near the exit of the impeller than that near the inlet of the impeller. Based on this phenomenon, a new partiallyshrouded impeller is used. The impeller is shrouded near the exit of the impeller. The results show that the flow field near the exit of the impeller is greatly changed by the partially shrouded impeller, and better performance is achievedthan with the unshrouded impeller. The loading distribution on the impeller blade and the flow fields in the impeller is changed by moving the splitter of the impeller in circumferential direction. Moving the splitter slightly to the suction side of the long blade can improve the performance of the compressor. The total enthalpy rise is reduced if only the leading edge of the splitter ismoved to the suction side of the long blade. The performance of the compressor is decreased if the blade is bended from the radius direction at the leading edge of the splitter. The total pressure rise and the enthalpy rise of thecompressor are increased if pinch is used at the diffuser inlet. Among the fivedifferent pinch shape configurations, at design and lower mass flow rates the efficiency of a straight line pinch is the highest, while at higher mass flow rate, the efficiency of a concave pinch is the highest. The sharp corner of the pinch is the main reason for the decrease of efficiency and should be avoided. The variation of the flow angles entering the diffuser in spanwise direction is decreased if pinch is applied. A three-dimensional low solidity twisted vaned diffuser is designed to match the flow angles entering the diffuser. The numerical results show that the pressure recovery in the twisted diffuser is higher than in a conventional low solidity vaned diffuser, which also leads to higher efficiency of the twisted diffuser. Investigation of the detailed flow fields shows that the separation at lower mass flow rate in the twisted diffuser is later than in the conventional low solidity vaned diffuser, which leads to a possible wider flow range of the twisted diffuser.

Local and Global Feature Extraction for Invariant Object Recognition

Perceiving the world visually is a basic act for humans, but for computers it is still an unsolved problem. The variability present innatural environments is an obstacle for effective computer vision. The goal of invariant object recognition is to recognise objects in a digital image despite variations in, for example, pose, lighting or occlusion. In this study, invariant object recognition is considered from the viewpoint of feature extraction. Thedifferences between local and global features are studied with emphasis on Hough transform and Gabor filtering based feature extraction. The methods are examined with respect to four capabilities: generality, invariance, stability, and efficiency. Invariant features are presented using both Hough transform and Gabor filtering. A modified Hough transform technique is also presented where the distortion tolerance is increased by incorporating local information. In addition, methods for decreasing the computational costs of the Hough transform employing parallel processing and local information are introduced.

Studies on the characterization of dental whitening process by using both hyperspectral imaging and colorimeter techniques

A beautiful smile is directly related with white teeth. Nowadays oral care has increased and developed processes for beautiful smiles. Dental bleaching is frequently used in odontology, not just for health care also for aesthetic treatment. With the possibility of teeth bleaching, now the importance is in, how white the tooth is? Because color is relate to an individual perception. In order to assets teeth correct color identification has been developed many color guides, models, spaces and analytical methods. Spite all of these useful tools the color interpretation depends on environmental factors, position of the sample in the data acquisition and most importantly the instrument sensitivity. The commons methods have proved to be useful. They are easy to handle, some are portable but they do not have a high sensitivity. The present work is based on the integration of a new analytical technique for color acquisition. High spectral Image (HSI) is able to performed image analysis with high quality and efficiency. HSI is used in many fields and we used it for color image analysis within the bleaching process. The main comparison was done with the HSI and the colorimeter through the processes of two different bleaching protocols. The results showed that HSI has higher sensitivity than the colorimeter. During the analysis the dental surface with the HSI we were able to notice surface changes. These changes were analyzed by roughness studies.

Stability of cognitive performance in children with mild intellectual disability.

AIM: Longitudinal studies that have examined cognitive performance in children with intellectual disability more than twice over the course of their development are scarce. We assessed population and individual stability of cognitive performance in a clinical sample of children with borderline to mild non-syndromic intellectual disability. METHOD: Thirty-six children (28 males, eight females; age range 3-19y) with borderline to mild intellectual disability (Full-scale IQ [FSIQ] 50-85) of unknown origin were examined in a retrospective clinical case series using linear mixed models including at least three assessments with standardized intelligence tests. RESULTS: Average cognitive performance remained remarkably stable over time (high population stability, drop of only 0.38 IQ points per year, standard error=0.39, p=0.325) whereas individual stability was at best moderate (intraclass correlation of 0.58), indicating that about 60% of the residual variation in FSIQ scores can be attributed to between-child variability. Neither sex nor socio-economic status had a statistically significant impact on FSIQ. INTERPRETATION: Although intellectual disability during childhood is a relatively stable phenomenon, individual stability of IQ is only moderate, likely to be caused by test-to-test reliability (e.g. level of child's cooperation, motivation, and attention). Therefore, clinical decisions and predictions should not rely on single IQ assessments, but should also consider adaptive functioning and previous developmental history.

Intracranial Aneurysm Rupture Is Predicted by Measures of Solar Activity.

OBJECTIVE: The cause precipitating intracranial aneurysm rupture remains unknown in many cases. It has been observed that aneurysm ruptures are clustered in time, but the trigger mechanism remains obscure. Because solar activity has been associated with cardiovascular mortality and morbidity, we decided to study its association to aneurysm rupture in the Swiss population. METHODS: Patient data were extracted from the Swiss SOS database, at time of analysis covering 918 consecutive patients with angiography-proven aneurysmal subarachnoid hemorrhage treated at 7 Swiss neurovascular centers between January 1, 2009, and December 31, 2011. The daily rupture frequency (RF) was correlated to the absolute amount and the change in various parameters of interest representing continuous measurements of solar activity (radioflux [F10.7 index], solar proton flux, solar flare occurrence, planetary K-index/planetary A-index, Space Environment Services Center [SESC] sunspot number and sunspot area) using Poisson regression analysis. RESULTS: During the period of interest, there were 517 days without recorded aneurysm rupture. There were 398, 139, 27, 12, 1, and 1 days with 1, 2, 3, 4, 5, and 6 ruptures per day. Poisson regression analysis demonstrated a significant correlation of F10.7 index and RF (incidence rate ratio [IRR] = 1.006303; standard error (SE) 0.0013201; 95% confidence interval (CI) 1.003719-1.008894; P < 0.001), according to which every 1-unit increase of the F10.7 index increased the count for an aneurysm to rupture by 0.63%. A likewise statistically significant relationship of both the SESC sunspot number (IRR 1.003413; SE 0.0007913; 95% CI 1.001864-1.004965; P < 0.001) and the sunspot area (IRR 1.000419; SE 0.0000866; 95% CI 1.000249-1.000589; P < 0.001) emerged. All other variables analyzed showed no significant correlation with RF. CONCLUSIONS: We found greater radioflux, SESC sunspot number, and sunspot area to be associated with an increased count of aneurysm rupture. The clinical meaningfulness of this statistical association must be interpreted carefully and future studies are warranted to rule out a type-1 error.

Intravoxel incoherent motion diffusion-weighted imaging in the liver: comparison of mono-, bi- and tri-exponential modelling at 3.0-T.

PURPOSE: To determine whether a mono-, bi- or tri-exponential model best fits the intravoxel incoherent motion (IVIM) diffusion-weighted imaging (DWI) signal of normal livers. MATERIALS AND METHODS: The pilot and validation studies were conducted in 38 and 36 patients with normal livers, respectively. The DWI sequence was performed using single-shot echoplanar imaging with 11 (pilot study) and 16 (validation study) b values. In each study, data from all patients were used to model the IVIM signal of normal liver. Diffusion coefficients (Di ± standard deviations) and their fractions (fi ± standard deviations) were determined from each model. The models were compared using the extra sum-of-squares test and information criteria. RESULTS: The tri-exponential model provided a better fit than both the bi- and mono-exponential models. The tri-exponential IVIM model determined three diffusion compartments: a slow (D1 = 1.35 ± 0.03 × 10(-3) mm(2)/s; f1 = 72.7 ± 0.9 %), a fast (D2 = 26.50 ± 2.49 × 10(-3) mm(2)/s; f2 = 13.7 ± 0.6 %) and a very fast (D3 = 404.00 ± 43.7 × 10(-3) mm(2)/s; f3 = 13.5 ± 0.8 %) diffusion compartment [results from the validation study]. The very fast compartment contributed to the IVIM signal only for b values ≤15 s/mm(2) CONCLUSION: The tri-exponential model provided the best fit for IVIM signal decay in the liver over the 0-800 s/mm(2) range. In IVIM analysis of normal liver, a third very fast (pseudo)diffusion component might be relevant. KEY POINTS: ? For normal liver, tri-exponential IVIM model might be superior to bi-exponential ? A very fast compartment (D = 404.00 ± 43.7 × 10 (-3)  mm (2) /s; f = 13.5 ± 0.8 %) is determined from the tri-exponential model ? The compartment contributes to the IVIM signal only for b ≤ 15 s/mm (2.)

'Herbal' but potentially hazardous: an analysis of the constituents and smoke emissions of tobacco-free waterpipe products and the air quality in the cafes where they are served

BACKGROUND: There are limited data on the composition and smoke emissions of 'herbal' shisha products and the air quality of establishments where they are smoked. METHODS: Three studies of 'herbal' shisha were conducted: (1) samples of 'herbal' shisha products were chemically analysed; (2) 'herbal' and tobacco shisha were burned in a waterpipe smoking machine and main and sidestream smoke analysed by standard methods and (3) the air quality of six waterpipe cafes was assessed by measurement of CO, particulate and nicotine vapour content. RESULTS: We found considerable variation in heavy metal content between the three products sampled, one being particularly high in lead, chromium, nickel and arsenic. A similar pattern emerged for polycyclic aromatic hydrocarbons. Smoke emission analyses indicated that toxic byproducts produced by the combustion of 'herbal' shisha were equivalent or greater than those produced by tobacco shisha. The results of our air quality assessment demonstrated that mean PM2.5 levels and CO content were significantly higher in waterpipe establishments compared to a casino where cigarette smoking was permitted. Nicotine vapour was detected in one of the waterpipe cafes. CONCLUSIONS: 'Herbal' shisha products tested contained toxic trace metals and PAHs levels equivalent to, or in excess of, that found in cigarettes. Their mainstream and sidestream smoke emissions contained carcinogens equivalent to, or in excess of, those of tobacco products. The content of the air in the waterpipe cafes tested was potentially hazardous. These data, in aggregate, suggest that smoking 'herbal' shisha may well be dangerous to health.

Voimalaitosten investointi- ja energiantuotantokustannusten arviointi

Investointi- ja energiantuotantokustannusten arviointi ja määrittäminen projektin alkuvaiheessa on olennainen osa voimalaitoksen elinkaaritiedon hallintaa. Tällöin tehdään investointi- ja energiantuotantokustannusten vertailua voimalaitosten kesken, joiden perusteella käytettävä voimalaitoskonsepti valitaan kompromissina toisaalta taloudellisen ja toisaalta suorituskyvyiltään tehokkaan voimalaitoksen väliltä. Koska investointikustannukset vaikuttavat suuresti energiatuotantokustannuksiin, on investointikustannusten arvioimisella suuri rooli voimalaitoskonseptia valittaessa. Investointikustannusten arviointimenetelmien käyttö eri projektivaiheissa riippuu pitkälti käytettävästä toteutuneesta kustannustiedosta sekä siitä, mihin tarkkuustasoon on kunkin projektin vaiheessa tarkoituksenmukaista pyrkiä. Suuren kustannusdatan avulla päästään vähilläkin lähtötiedoilla hyvään kustannusarvion tarkkuuteen. Projektin alkuvaiheessa ei kuitenkaan kannata uhrata liikaa aikaa kustannusarvion laatimiseen, koska arvioinnin kustannus kasvaa tarkkuuden myötä. Tässä työssä pyrittiin löytämään riippuvuussuhteita voimalaitosten kustannusten ja suoritusarvojen välille. Havaittujen riippuvuussuhteiden perusteella määritettiin in-vestointi- ja sähköntuotantokustannukset noin 50:lle voimalaitokselle. Investointi-kustannukset jaettiin 23:een kustannuskomponenttiin koneiden ja laitteiden sekä ra-kennusteknisten töiden kustannusryhmiin. Lisäksi kokonaisinvestointiin sisältyy projektikustannukset, rakennusaikaiset korot ja varaus. Laskettujen voimalaitosten avulla muodostettiin oma laskentaohjelmisto investointi- ja energiantuotantokustan-nusten arviointiin sekä talletukseen. Ohjelmistolla pyritään yhdenmukaistamaan kustannusarvioiden laadintaa samalla vähentäen arvioissa esiintyvää inhimillisen virheen todennäköisyyttä.

Comparison of Compound Lean Nozzles and Controlled Flow Nozzles at Off-Design

Turbokoneet ja etenkin höyryturbiinit ovat usein suunniteltu ja optimoitu toimimaan tietyssä toimintapisteessä jossa häviöt on minimoitu ja hyötysuhde maksimoitu. Joissakin tapauksissa on kuitenkin tarpeellista käyttää turbiinia toimintapisteen ulkopuolella. Tällöin turbiinin läpi virtaava massavirta muuttuu ja yleensä heikentää hyötysuhdetta. Turbokoneiden suorituskykyä voidaan parantaa käyttämällä kolmidimensionaalisesti muotoiltuja siipiä. Työssä on vertailtu laskennallisesti kahta kohtuullisesti muotoiltua suutinta (Compound lean ja Controlled flow) niiden suunnitellun toimintapisteen ulkopuolella. Kolmas suutin, ilman kolmidimensionaalista muotoilua on mukana vertailukohteena. Suutinten suorituskykyä tutkitaan laskennallisen virtausmekaniikan avulla olosuhteissa, jotka ovat toimintapisteen ulkopuolella. Virtauksen muutoksia tutkitaan kokonaispainehäviön, isentrooppisen hyötysuhteen ja virtauspinnan yhdenmukaisuuden avulla. Virtauspintoja verrataan ulosvirtauskulman, massavirran ja toisiovirtausvektoreiden jakauman avulla. Erot suutinten suorituskykyvyssä korostavat ylikuormalla. Kun massavirran arvoa on kohotettu eniten, Compound lean suuttimilla hyötysuhde laskee Controlled flow suuttimeen verrattuna vähemmän. Alikuormalla, kun massavirran arvoa lasketaan, erot suuttimien suorituskyvyssä pienenevät ja tutkittujen suuttimien ulosvirtaus on samankaltainen.

Detection of Clinically Significant Prostate Cancer Using Magnetic Resonance Imaging-Ultrasound Fusion Targeted Biopsy: A Systematic Review.

CONTEXT: The current standard for diagnosing prostate cancer in men at risk relies on a transrectal ultrasound-guided biopsy test that is blind to the location of the cancer. To increase the accuracy of this diagnostic pathway, a software-based magnetic resonance imaging-ultrasound (MRI-US) fusion targeted biopsy approach has been proposed. OBJECTIVE: Our main objective was to compare the detection rate of clinically significant prostate cancer with software-based MRI-US fusion targeted biopsy against standard biopsy. The two strategies were also compared in terms of detection of all cancers, sampling utility and efficiency, and rate of serious adverse events. The outcomes of different targeted approaches were also compared. EVIDENCE ACQUISITION: We performed a systematic review of PubMed/Medline, Embase (via Ovid), and Cochrane Review databases in December 2013 following the Preferred Reported Items for Systematic reviews and Meta-analysis statement. The risk of bias was evaluated using the Quality Assessment of Diagnostic Accuracy Studies-2 tool. EVIDENCE SYNTHESIS: Fourteen papers reporting the outcomes of 15 studies (n=2293; range: 13-582) were included. We found that MRI-US fusion targeted biopsies detect more clinically significant cancers (median: 33.3% vs 23.6%; range: 13.2-50% vs 4.8-52%) using fewer cores (median: 9.2 vs 37.1) compared with standard biopsy techniques, respectively. Some studies showed a lower detection rate of all cancer (median: 50.5% vs 43.4%; range: 23.7-82.1% vs 14.3-59%). MRI-US fusion targeted biopsy was able to detect some clinically significant cancers that would have been missed by using only standard biopsy (median: 9.1%; range: 5-16.2%). It was not possible to determine which of the two biopsy approaches led most to serious adverse events because standard and targeted biopsies were performed in the same session. Software-based MRI-US fusion targeted biopsy detected more clinically significant disease than visual targeted biopsy in the only study reporting on this outcome (20.3% vs 15.1%). CONCLUSIONS: Software-based MRI-US fusion targeted biopsy seems to detect more clinically significant cancers deploying fewer cores than standard biopsy. Because there was significant study heterogeneity in patient inclusion, definition of significant cancer, and the protocol used to conduct the standard biopsy, these findings need to be confirmed by further large multicentre validating studies. PATIENT SUMMARY: We compared the ability of standard biopsy to diagnose prostate cancer against a novel approach using software to overlay the images from magnetic resonance imaging and ultrasound to guide biopsies towards the suspicious areas of the prostate. We found consistent findings showing the superiority of this novel targeted approach, although further high-quality evidence is needed to change current practice.

Hyvän hyötysuhteen moottorilla saavutettavat säästöt

Työssä on tutkittu milloin kannattaa hankkia hyvän hyötysuhteen moottori tavallisen moottorin sijasta. Työ on tehty UPM-Kymmene Oyj:n Kaukaan tehtailla. Ensiksi selvitettiin millaisessa kuormassa moottorit Kaukaan sellu- ja paperitehtaalla käyvät. Sen jälkeen työssä laskettiin, milloin hyvän hyötysuhteen moottorilla saavutetaan niin suuret säästöt, että se kannattaa hankkia. Hyvän hyötysuhteen moottorin hankinnalle laskettiin myös takaisinmaksuaika ja sisäinen korko. Herkkyysanalyysillä tutkittiin muuttuuko moottori-investoinnin kannattavuus, kun hankkeen kriittisiä tekijöitä muutetaan. Oleellista moottori-investoinnissa on moottoreiden hinta ja hyötysuhde-ero sekä moottorin käyntiaika ja kuormitusprosentti. Työn perusteella selvisi, että ainakin pienet moottorit kannattaa hankkia hyvän hyötysuhteen moottoreina.