Hybrid Simulation of Queuing-System Dynamics

This paper presents a simple hybrid computer technique to study the transient behaviour of queueing systems. This method is superior to stand-alone analog or digital solution because the hardware requirement is excessive for analog technique whereas computation time is appreciable in the latter case. By using a hybrid computer one can share the analog hardware thus requiring fewer integrators. The digital processor can store the values, play them back at required time instants and change the coefficients of differential equations. By speeding up the integration on the analog computer it is feasible to solve a large number of these equations very fast. Hybrid simulation is even superior to the analytic technique because in the latter case it is difficult to solve time-varying differential equations.

Combustion and Thermal Decomposition of Ammonium Perchlorate-Aluminium Composite Pellets: Mechanism for Aluminium Participation

Thermal behaviour of ammonium perchlorate-aluminium composites is studied using differential thermal analysis, thermogravimetry and differential scanning calorimetry. Electrical resistivity studies throw light on the mechanism of ammonium perchlorate decomposition at different aluminium contents. The differences observed in burning behaviour by earlier authors is explained in terms of porosity and thermal conductivity of the composite.

Influence of rapid thermal annealing (RTA) on the structural and electrical properties of SnS films

The performance of optoelectronic devices critically depends on the quality of active layer. An effective way to obtain a high quality layers is by creating excess of metal atoms through various heat treatments. Recently, rapid thermal annealing (RTA) has proved a versatile technique for the post-treatment of semiconductor materials as compared to other techniques due to its precise control over the resources. Thus, we carried out a set of experiments on SnS films to explore the influence of RTA treatment on their properties. From these experiments we noticed that the films treated at 400 °C for 1 min in N2 atmosphere have a low electrical resistivity of ~5 Ωcm with relatively high Hall mobility and carrier density of 99 cm2/Vs and 1.3 × 1016 cm−3, respectively. The observed results, therefore, emphasise that it is possible to obtain good quality SnS films through RTA treatment without disturbing their crystal structure.

Child dietary and eating behaviour outcomes up to 3.5 years after an early feeding intervention: the NOURISH RCT

- Objective To evaluate dietary intake impact outcomes up to 3.5 years after the NOURISH early feeding intervention (concealed allocation, assessor masked RCT). - Methods 698 first-time mothers with healthy term infants were allocated to receive anticipatory guidance on protective feeding practices or usual care. Outcomes were assessed at 2, 3.7 and 5 years (3.5 years post-intervention). Dietary intake was assessed by 24-hour recall and Child Dietary Questionnaire. Mothers completed a food preference questionnaire and Children’s Eating Behaviour Questionnaire. Linear mixed models assessed group, time and time x group effects. - Results There were no group or time x group effects for fruit, vegetables, discretionary food and non-milk sweetened beverages intake. Intervention children showed a higher preference for fruits (74.6% vs 69.0% liked, P<.001), higher Child Dietary Questionnaire score for fruit and vegetables (15.3 vs 14.5, target>18, P=0.03), lower food responsiveness (2.3 vs 2.4, of maximum 5, P=.04) and higher satiety responsiveness (3.1 vs 3.0, of maximum 5, P=.04). - Conclusions Compared to usual care, an early feeding intervention providing anticipatory guidance regarding positive feeding practices led to small improvements in child dietary score, food preferences and eating behaviours up to 5 years of age, but not in dietary intake measured by 24-hour recall.

Studies on the out-of-plane behaviour of masonry walls

The prime aim of this PhD thesis is to contribute to the current body of knowledge on the out-of-plane performance of masonry walls through systematic investigation of the key parameters and provide insight into the design clauses of Australian Masonry Standard (AS3700-2011). The research work has been carried out through numerical simulation based on a 3D layered shell element model. The model demonstrated capability to simulate various forms of new and existing masonry systems commonly constructed in Australia such as unreinforced, internally and externally reinforced, confined and dry-stack masonry. In addition, the model simultaneously simulates in-plane and out-of-plane responses.

Appalling behaviour

'Appalling Behaviour' is a critically acclaimed contemporary Australian monologue, written by AWGIE Award winning playwright, Stephen House. This production, directed and creatively adapted by Shane Pike, was presented at the Brisbane Powerhouse in February 2016, as part of Queensland's LGBTIQ festival, Melt. This adaptation of the work experimented with notions of gender, taking the original script and manipulating character and scene to investigate expressions of identity beyond the traditional notions of binary gender-norms. To this end, the sole character (and actor) was (re)presented as a homeless bi-sexual queen with the aim of inferring that gender un/ab-normative characters can exist not only as disruptors/comments on/agitators of traditional expectations of performed gender (both onstage and off), but can also exist as accepted characters in and of themselves. Put simply: can a bi-sexual queen just be an actor/character in a play, or do all gender extra-normative characters inherently exist as political, social and cultural challengers? If so, why is this the case and should we be aiming for this kind of character to be an accepted part of the performative fabric, seamless and fitting within any onstage situation and play (why can't Willy Loman, King Lear or Nora be gender non-normative), or should such (re)presentations always exist as 'different'? Is it time for individual expressions of gender to just 'be' and be accepted as givens, or are we not quite there yet?

Critical point phenomena in the electrical resistivity of binary liquid systems: Cs2 + CH3CN and CS2 + CH3NO2

Electrical resistance measurements are reported on the binary liquid mixtures CS2 + CH3CN and CS2 + CH3NO2 with special reference to the critical region. Impurity conduction seems to be the dominant mechanism for charge transport. For the liquid mixture filled at the critical composition, the resistance of the system aboveT c follows the relationR=R c−A(T−T c) b withb=0·6±0·1. BelowT c the conductivities of the two phases obey a relation σ2−σ1=B(T c−T)β with β=0·34±0·02, the exponent of the transport coefficient being the same as the exponent of the order parameter, an equilibrium property.

Factors influencing kinetic and equilibrium behaviour of sodium ion exchange with strong acid cation resin

This study reports an investigation of the ion exchange treatment of sodium chloride solutions in relation to use of resin technology for applications such as desalination of brackish water. In particular, a strong acid cation (SAC) resin (DOW Marathon C) was studied to determine its capacity for sodium uptake and to evaluate the fundamentals of the ion exchange process involved. Key questions to answer included: impact of resin identity; best models to simulate the kinetics and equilibrium exchange behaviour of sodium ions; difference between using linear least squares (LLS) and non-linear least squares (NLLS) methods for data interpretation; and, effect of changing the type of anion in solution which accompanied the sodium species. Kinetic studies suggested that the exchange process was best described by a pseudo first order rate expression based upon non-linear least squares analysis of the test data. Application of the Langmuir Vageler isotherm model was recommended as it allowed confirmation that experimental conditions were sufficient for maximum loading of sodium ions to occur. The Freundlich expression best fitted the equilibrium data when analysing the information by a NLLS approach. In contrast, LLS methods suggested that the Langmuir model was optimal for describing the equilibrium process. The Competitive Langmuir model which considered the stoichiometric nature of ion exchange process, estimated the maximum loading of sodium ions to be 64.7 g Na/kg resin. This latter value was comparable to sodium ion capacities for SAC resin published previously. Inherent discrepancies involved when using linearized versions of kinetic and isotherm equations were illustrated, and despite their widespread use, the value of this latter approach was questionable. The equilibrium behaviour of sodium ions form sodium fluoride solution revealed that the sodium ions were now more preferred by the resin compared to the situation with sodium chloride. The solution chemistry of hydrofluoric acid was suggested as promoting the affinity of the sodium ions to the resin.

Studies on electrical conductivity of insulator-conductor composites

The variation of electrical resistivity of an insulator-conductor composite, namely, wax-graphite composite, with parameters such as volume fraction, grain size, and temperature has been studied. A model is proposed to explain the observed variations, which assumes that the texture of the composite consists of insulator granules coated with conducting particles. The resistivity of these materials is controlled mainly by the contact resistance between the conducting particles and the number of contacts each particle has with its neighbors. The variation of resistivity with temperature has also been explained with the help of this model and it is attributed to the change in contact area. Journal of Applied Physics is copyrighted by The American Institute of Physics.

Documenting the inevitable: Voting behaviour at the 2013 Australian election

This chapter uses data from the 2013 Australian Election Study (AES), conducted by Clive Bean, Ian McAllister, Juliet Pietsch and Rachel Gibson (Bean et al. 2014) to investigate political attitudes and voting behaviour in the election. The study was funded by the Australian Research Council and involved a national survey of political attitudes and behaviour using a self-completion questionnaire mailed to respondents on the day before the 7 September election. The sample was a systematic random sample of enrolled voters throughout Australia, drawn by the Australian Electoral Commission. Respondents were given the option of returning the completed questionnaire by reply-paid mail or completing the survey online. Non-respondents were sent several follow-up mailings and the final sample size was 3955, representing a response rate of 34 per cent. The data were weighted to reflect population parameters for gender, age, state and vote.

Quitty: Using technology to persuade smokers to quit

Health is an important topic in HCI research with an increasing amount of health risks surrounding individuals and society at large. It is well known that smoking cigarettes can have serious health implications. The importance of this problem motivates investigation into the use of technology to encourage behavior change. Our study was designed to gather empirical knowledge about the role a "quitting app" can play in persuading people to quit smoking. Our purpose-built app Quitty introduces different content types from different content sources to study how they are perceived and motivate health behavior change. Findings from our field study show that tailored content and push-messages are considered the most important for persuading people to stop smoking. Based on our empirical findings, we propose six guidelines on how to design mobile applications to persuade smokers to quit.

What people talk about when they talk about quitting

As part of an ongoing project to explore the design of behaviour-change technology for smoking cessation, we analysed a successful community who come together on the popular Reddit website to discuss quitting and to encourage each other's quit attempts. We found that users remain anonymous but identify according to their quit stage. We examined the form and content of posts, finding that narratives about people and events are more common than other rhetorical forms. Many speak of ongoing struggles with quit attempts. Our analysis reveals forms of sociality spontaneously enacted in a self-managed community of quitters. We compare our results with earlier work on social media and behaviour change.

Unbounding the interaction design problem: The contribution of HCI in three interventions for well-being

In this paper we consider HCI's role in technology interventions for health and well-being. Three projects carried out by the authors are analysed by appropriating the idea of a value chain to chart a causal history from proximal effects generated in early episodes of design through to distal health and well-being outcomes. Responding to recent arguments that favour bounding HCI's contribution to local patterns of use, we propose an unbounded view of HCI that addresses an extended value chain of influence. We discuss a view of HCI methods as mobilising this value chain perspective in multi-disciplinary collaborations through its emphasis on early prototyping and naturalistic studies of use.

Patterns of support in an online community for smoking cessation

Social support offers various benefits for health and behaviour change. However, previous work has shown that individuals are typically reluctant to ask for support on social network sites, unless they can present a changed, healthier identity. To examine the relationship between stage of change and social support we conducted a thematic analysis of messages posted in a public Facebook support group for people trying to quit smoking. Our findings show that the kind of support exchanged online is related to participants' stage of change. Contrary to our expectations, supportive responses and leadership in the support group came mainly from users who just started their change process rather than people who had already changed. We discuss contributions to theories of online participation and impression management as well as implications for practitioners who seek to establish support groups.