Metodologia de otimização para o dimensionamento de reservatórios de águas pluviais

This work aimed to develop an optimization methodology for reservoir sizing in rainwater harvesting systems in order to increase the economic viability of projects in this area. For this, concepts of Operations Research were used so as to develop mathematical programming problems related to minimizing the life cycle cost and maximizing efficiency. The results obtained for different sizing methods were presented based on a case study, emphasizing the importance of tools that are able to provide a more accurate analysis and tend to significantly increase the economic viability of rainwater harvesting systems.

Modelos matemáticos para o problema integrado de dimensionamento de lotes e corte de estoque unidimensional

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Um estudo sobre limites duais para o problema integrado de dimensionamento de lotes e sequenciamento da produção

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Um Modelo para Análise do Balanço e Eficiência Energética na Logística de Transporte Dutoviário para Exportação do Etanol.

This paper analyzed the energy flow of a route currently designed to transport ethanol from the Midwest region of Brazil for exportation, more precisely from the city of Aparecida do Taboado (MS) to the port of São Sebastiao (SP). The route studied a single modal combined into two pieces, duct - duct. The direct and indirect energy, involved in the operations were used to account for the inputs and outputs of energy from and into the system. The energy input and output were the variables, diesel fuel, lubricants, greases, indirect energy consumption of machinery and equipment, power consumption of labor, the energy consumption and energy consumption in depreciation and maintenance of roads. We found that this route has specific energy consumption of 0,14 MJ km-1 m-3 . The Net Energy Gain (GEl), the Energy Efficiency global (EEg) and Renewable Energy Balance (BEr), which were the energy indicators adopted in this study were obtained respectively: 1.585.958.977,00 MJ; 200,72 and 1.593.900.000,00MJ.

Relação entre risco de erosão e distância de camalhões em estradas florestais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Reformulações para o problema integrado de dimensionamento e sequenciamento da produção

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Considerações sobre a armadura transversal de pilares de concreto armado

There are regulations that establish conditions and enable the design of armor columns. The NBR 6118 features statements relating to the transverse reinforcement as spacing, reinforcement diameters provision in structural elements and others. However, the norm in force does not provide an explicit methodology for the design of stirrups in different situations. We do not propose even a calculation model for this equipment and provides normative considerations for maximum or minimum values of spacings and armor in diameter. It is noteworthy that the classical references also do not provide a calculation routine sizing of transverse reinforcement and only makes the checks as the normative conditions for the given data. Based on this assumption and the problems that may occur in sizing error, both for spacing and for the proposal of the stirrup diameter, this study demonstrates that armor calculation method already established in the literature and then through an intuitive tool and available develops a spreadsheet based on this calculation routine. It takes as reference the one developed by Emil Moersch (1902) and the calculation model proposed by BUFFONI E SILVA (2006). Finally the paper presents a rational design of shear reinforcement and confronts these values with some numerical examples to show its truth

Survivable Traffic Grooming With Path Protection at the Connection Level in WDM Mesh Networks

Survivable traffic grooming (STG) is a promising approach to provide reliable and resource-efficient multigranularity connection services in wavelength-division-multiplexing (WDM) optical networks. In this paper, we study the STG problem in WDM mesh optical networks employing path protection at the connection level. Both dedicated-protection and shared-protection schemes are considered. Given network resources, the objective of the STG problem is to maximize network throughput. To enable survivability under various kinds of single failures, such as fiber cut and duct cut, we consider the general shared-risklink- group (SRLG) diverse routing constraints. We first resort to the integer-linear-programming (ILP) approach to obtain optimal solutions. To address its high computational complexity, we then propose three efficient heuristics, namely separated survivable grooming algorithm (SSGA), integrated survivable grooming algorithm (ISGA), and tabu-search survivable grooming algorithm (TSGA). While SSGA and ISGA correspond to an overlay network model and a peer network model, respectively, TSGA further improves the grooming results from SSGA and ISGA by incorporating the effective tabu-search (TS) method. Numerical results show that the heuristics achieve comparable solutions to the ILP approach, which uses significantly longer running times than the heuristics.

Survivable Traffic Grooming with Path Protection at the Connection Level in WDM Mesh Networks

Survivable traffic grooming (STG) is a promising approach to provide reliable and resource-efficient multigranularity connection services in wavelength division multiplexing (WDM) optical networks. In this paper, we study the STG problem in WDM mesh optical networks employing path protection at the connection level. Both dedicated protection and shared protection schemes are considered. Given the network resources, the objective of the STG problem is to maximize network throughput. To enable survivability under various kinds of single failures such as fiber cut and duct cut, we consider the general shared risk link group (SRLG) diverse routing constraints. We first resort to the integer linear programming (ILP) approach to obtain optimal solutions. To address its high computational complexity, we then propose three efficient heuristics, namely separated survivable grooming algorithm (SSGA), integrated survivable grooming algorithm (ISGA) and tabu search survivable grooming algorithm (TSGA). While SSGA and ISGA correspond to an overlay network model and a peer network model respectively, TSGA further improves the grooming results from SSGA and ISGA by incorporating the effective tabu search method. Numerical results show that the heuristics achieve comparable solutions to the ILP approach, which uses significantly longer running times than the heuristics.

On Modular Design of Field Robotic Systems

Robots are needed to perform important field tasks such as hazardous material clean-up, nuclear site inspection, and space exploration. Unfortunately their use is not widespread due to their long development times and high costs. To make them practical, a modular design approach is proposed. Prefabricated modules are rapidly assembled to give a low-cost system for a specific task. This paper described the modular design problem for field robots and the application of a hierarchical selection process to solve this problem. Theoretical analysis and an example case study are presented. The theoretical analysis of the modular design problem revealed the large size of the search space. It showed the advantages of approaching the design on various levels. The hierarchical selection process applies physical rules to reduce the search space to a computationally feasible size and a genetic algorithm performs the final search in a greatly reduced space. This process is based on the observation that simple physically based rules can eliminate large sections of the design space to greatly simplify the search. The design process is applied to a duct inspection task. Five candidate robots were developed. Two of these robots are evaluated using detailed physical simulation. It is shown that the more obvious solution is not able to complete the task, while the non-obvious asymmetric design develop by the process is successful.

The Use of Factor Analysis in the Development of Hand Sizes for Glove Design

Factor analysis was used to develop a more detailed description of the human hand to be used in the creation of glove sizes; currently gloves sizes are small, medium, and large. The created glove sizes provide glove designers with the ability to create a glove design that can provide fit to the majority of hand variations in both the male and female populations. The research used the American National Survey (ANSUR) data that was collected in 1988. This data contains eighty-six length, width, height, and circumference measurements of the human hand for one thousand male subjects and thirteen hundred female subjects. Eliminating redundant measurements reduced the data to forty-six essential measurements. Factor analysis grouped the variables to form three factors. The factors were used to generate hand sizes by using percentiles along each factor axis. Two different sizing systems were created. The first system contains 125 sizes for male and female. The second system contains 7 sizes for males and 14 sizes for females. The sizing systems were compared to another hand sizing system that was created using the ANSUR database indicating that the systems created using factor analysis provide better fit.

Considerações sobre a armadura transversal de pilares de concreto armado

There are regulations that establish conditions and enable the design of armor columns. The NBR 6118 features statements relating to the transverse reinforcement as spacing, reinforcement diameters provision in structural elements and others. However, the norm in force does not provide an explicit methodology for the design of stirrups in different situations. We do not propose even a calculation model for this equipment and provides normative considerations for maximum or minimum values of spacings and armor in diameter. It is noteworthy that the classical references also do not provide a calculation routine sizing of transverse reinforcement and only makes the checks as the normative conditions for the given data. Based on this assumption and the problems that may occur in sizing error, both for spacing and for the proposal of the stirrup diameter, this study demonstrates that armor calculation method already established in the literature and then through an intuitive tool and available develops a spreadsheet based on this calculation routine. It takes as reference the one developed by Emil Moersch (1902) and the calculation model proposed by BUFFONI E SILVA (2006). Finally the paper presents a rational design of shear reinforcement and confronts these values with some numerical examples to show its truth

Oral glands in dipsadine ""goo-eater"" snakes: Morphology and histochemistry of the infralabial glands in Atractus reticulatus, Dipsas indica, and Sibynomorphus mikanii

Although snake infralabial glands are generally constituted of mucous cells, among dipsadines, they are much more developed and predominantly serous in nature, possibly due to the peculiar feeding habits of some species of this group, the ""goo-eaters"", which feed on soft and viscous invertebrates. We compared the morphology and histochemistry of the infralabial glands of three goo-eater species of Southeast Brazil, Atractus reticulatus, Dipsas indica and Sibynomorphus mikanii. In A. reticulatus the glands are formed by mixed acini composed of mucous and seromucous cells and in D. indica, they are composed of mucous tubules and seromucous acini. In S. mikanii the glands are organized in seromucous acini; mucous cells are restricted to the gland anterior region and to the duct lining epithelium. Ultrastructurally, secretory granule electron density varies from low to moderate, depending on their mucous or seromucous nature. The results indicate a large morphological and histochemical variation in the infralabial glands, probably reflecting differences in the secretion chemical composition and in feeding specialization among the three species. The protein content in the secretory cells can be related with the presence of toxins that can be used in chemical prey immobilization or detaching of snails from their shells. (c) 2007 Elsevier Ltd. All rights reserved.

Influence of biliary anastomosis on recovery from secondary biliary cirrhosis

Objective The influence of choledochoduodenostomy and choledochojejunostomy on the repair of hepatic lesions secondary to biliary obstruction is not well known. The aim of the present study was to compare the effects of choledochoduodenostomy and choledochojejunostomy on the recovery of these lesions in rats with biliary obstruction. Methods Rats subjected to 4 weeks of biliary obstruction underwent choledochoduodenostomy (n=10) or choledochojejunostomy (n=10). The following variables were measured: total bilirubin, alkaline phosphatase, aminotransferases, and albumin. Hepatic mitochondrial energy metabolism was evaluated by calculating the respiratory control ratio and the oxidative phosphorylation index. Hepatic morphometry was used to estimate the mass of the hepatocytes, bile ducts, and fibrosis, as well as the hepatic stellate cell count. Results After choledochoduodenostomy and choledochojejunostomy, there was a regression in cholestasis and a reduction in the oxidative phosphorylation index. However, the total bilirubin, alkaline phosphatase, albumin, and respiratory control ratio values improved only after choledochojejunostomy. The mass of the liver, spleen, and fibrosis was reduced after both choledochoduodenostomy and choledochojejunostomy, but the number of hepatic stellate cells increased. After choledochojejunostomy, the hepatic mass recovered completely, and the spleen mass was significantly reduced compared with that after choledochoduodenostomy. After both choledochoduodenostomy and choledochojejunostomy, enterobiliary reflux, biliary contamination, and an exacerbation in hepatic inflammation developed. Conclusion Choledochojejunostomy was more effective than choledochoduodenostomy, but both techniques induced enterobiliary reflux and biliary contamination, which may explain the maintenance of hepatic alterations, especially after choledochoduodenostomy. Eur J Gastroenterol Hepatol 24: 1039-1050 (C) 2012 Wolters Kluwer Health vertical bar Lippincott Williams & Wilkins.

Biliary tract schwannoma: A rare cause of obstructive jaundice in a young patient

Schwannoma is a tumor derived from Schwann cells which usually arises in the upper extremities, trunk, head and neck, retroperitoneum, mediastinum, pelvis, and peritoneum. However, it can arise in the gastrointestinal tract, including biliary tract. We present a 24-year-old male patient with obstructive jaundice, whose investigation with computed tomography abdomen showed focal wall thickening in the common hepatic duct, difficult to differentiate with hilar adenocarcinoma. He was diagnosed intraoperatively schwannoma of common bile duct and treated with local resection. The patient recovered well without signs of recurrence of the lesion after 12 mo. We also reviewed the common bile duct schwannoma related in the literature and evaluated the difficulty in pre and intraoperative differential diagnosis with adenocarcinoma hilar. Resection is the treatment of choice for such cases and the tumor did not recur in any of the resected cases. (C) 2012 Baishideng. All rights reserved.