The prevalence and correlates of childhood trauma in patients with early psychosis

Objective: To describe the prevalence and demographic, clinical and functional correlates of childhood trauma in patients attending early psychosis clinics. Method: Participants were recruited from outpatients attending four early psychosis services. Exposure to childhood trauma was assessed using the Childhood Trauma Questionnaire (CTQ). Psychopathology was measured using the Positive and Negative Syndrome Scale and the Depression, Anxiety and Stress Scale. Social and vocational functioning and substance use were also assessed. Results: Over three-quarters of the 100 patients reported exposure to any childhood trauma. Emotional, physical and sexual abuse were reported by 54%, 23% and 28% of patients, respectively, while 49% and 42% of patients reported emotional and physical neglect, respectively. Female participants were significantly more likely to be exposed to emotional and sexual abuse. Exposure to childhood trauma was correlated with positive psychotic symptoms and higher levels of depressive, anxiety and stress symptoms; however, it had no impact on social or vocational functioning or recent substance use. Conclusion: Exposure to childhood trauma was common in patients with early psychosis, and associated with increased symptomatology. Existing recommendations that standard clinical assessment of patients with early psychosis should include inquiry into exposure to childhood trauma are supported.

An analytical approach to the study of cooperation in wireless ad hoc networks

In wireless ad hoc networks, nodes communicate with far off destinations using intermediate nodes as relays. Since wireless nodes are energy constrained, it may not be in the best interest of a node to always accept relay requests. On the other hand, if all nodes decide not to expend energy in relaying, then network throughput will drop dramatically. Both these extreme scenarios (complete cooperation and complete noncooperation) are inimical to the interests of a user. In this paper, we address the issue of user cooperation in ad hoc networks. We assume that nodes are rational, i.e., their actions are strictly determined by self interest, and that each node is associated with a minimum lifetime constraint. Given these lifetime constraints and the assumption of rational behavior, we are able to determine the optimal share of service that each node should receive. We define this to be the rational Pareto optimal operating point. We then propose a distributed and scalable acceptance algorithm called Generous TIT-FOR-TAT (GTFT). The acceptance algorithm is used by the nodes to decide whether to accept or reject a relay request. We show that GTFT results in a Nash equilibrium and prove that the system converges to the rational and optimal operating point.

Measurement of air leakage in air-handling units and air conditioning ducts

The purpose of this article is to report the experience of design and testing of orifice plate-based flow measuring systems for evaluation of air leakages in components of air conditioning systems. Two of the flow measuring stations were designed with a beta value of 0.405 and 0.418. The third was a dual path unit with orifice plates of beta value 0.613 and 0.525. The flow rates covered with all the four were from 4-94 l/s and the range of Reynolds numbers is from 5600 to 76,000. The coefficients of discharge were evaluated and compared with the Stolz equation. Measured C-d values are generally higher than those obtained from the equation, the deviations being larger in the low Reynolds number region. Further, it is observed that a second-degree polynomial is inadequate to relate the pressure drop and flow rate. The lower Reynolds number limits set by standards appear to be somewhat conservative.

The significance of brittle reaction layers in fusing of dental ceramics to titanium

This thesis comprises four intercomplementary parts that introduce new approaches to brittle reaction layers and mechanical compatibility of metalloceramic joints created when fusing dental ceramics to titanium. Several different methods including atomic layer deposition (ALD), sessile drop contact angle measurements, scanning acoustic microscopy (SAM), three-point bending (TPB, DIN 13 927 / ISO 9693), cross-section microscopy, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) were employed. The first part investigates the effects of TiO2 layer structure and thickness on the joint strength of the titanium-metalloceramic system. Samples with all tested TiO2 thicknesses displayed good ceramics adhesion to Ti, and uniform TPB results. The fracture mode was independent of oxide layer thickness and structure. Cracking occurred deeper inside titanium, in the oxygen-rich Ti[O]x solid solution surface layer. During dental ceramics firing TiO2 layers dissociate and joints become brittle with increased dissolution of oxygen into metallic Ti and consequent reduction in the metal plasticity. To accomplish an ideal metalloceramic joint this needs to be resolved. The second part introduces photoinduced superhydrophilicity of TiO2. Test samples with ALD deposited anatase TiO2 films were produced. Samples were irradiated with UV light to induce superhydrophilicity of the surfaces through a cascade leading to increased amount of surface hydroxyl groups. Superhydrophilicity (contact angle ~0˚) was achieved within 2 minutes of UV radiation. Partial recovery of the contact angle was observed during the first 10 minutes after UV exposure. Total recovery was not observed within 24h storage. Photoinduced ultrahydrophilicity can be used to enhance wettability of titanium surfaces, an important factor in dental ceramics veneering processes. The third part addresses interlayers designed to restrain oxygen dissolution into Ti during dental ceramics fusing. The main requirements for an ideal interlayer material are proposed. Based on these criteria and systematic exclusion of possible interlayer materials silver (Ag) interlayers were chosen. TPB results were significantly better in when 5 μm Ag interlayers were used compared to only Al2O3-blasted samples. In samples with these Ag interlayers multiple cracks occurred inside dental ceramics, none inside Ti structure. Ag interlayers of 5 μm on Al2O3-blasted samples can be efficiently used to retard formation of the brittle oxygen-rich Ti[O]x layer, thus enhancing metalloceramic joint integrity. The most brittle component in metalloceramic joints with 5 μm Ag interlayers was bulk dental ceramics instead of Ti[O]x. The fourth part investigates the importance of mechanical interlocking. According to the results, the significance of mechanical interlocking achieved by conventional surface treatments can be questioned as long as the formation of the brittle layers (mainly oxygen-rich Ti[O]x) cannot be sufficiently controlled. In summary in contrast to former impressions of thick titanium oxide layers this thesis clearly demonstrates diffusion of oxygen from sintering atmosphere and SiO2 to Ti structures during dental ceramics firing and the following formation of brittle Ti[O]x solid solution as the most important factors predisposing joints between Ti and SiO2-based dental ceramics to low strength. This among other predisposing factors such as residual stresses created by the coefficient of thermal expansion mismatch between dental ceramics and Ti frameworks can be avoided with Ag interlayers.

Heat transfer to newtonian fluids in coiled pipes in laminar flow

Data on pressure drop and heat transfer to aqueous solutions of glycerol flowing in different types of coiled pipes are presented for laminar flow in the range of NRe from 80 to 6000. An empirical correlation is set up which can account the present data as well as the data available in literature within ±10 per cent deviation. Conventional momentum and heat transfer analogy equation is used to analyse the present data.

A unified approach to bubble and drop formation

An approach, starting with the bubble formation model of Khurana and Khumar, has been presented, which is found to be reasonably applicable to the formation of both bubbles and drops from single submerged nozzles. The model treats both the phenomena jointly as the formation of a dispersed phase entity resulting from injection, whose size depends upon operating parameters and physical properties.

Monte Carlo simulations of molecular clusters in nucleation

A better understanding of the limiting step in a first order phase transition, the nucleation process, is of major importance to a variety of scientific fields ranging from atmospheric sciences to nanotechnology and even to cosmology. This is due to the fact that in most phase transitions the new phase is separated from the mother phase by a free energy barrier. This barrier is crossed in a process called nucleation. Nowadays it is considered that a significant fraction of all atmospheric particles is produced by vapor-to liquid nucleation. In atmospheric sciences, as well as in other scientific fields, the theoretical treatment of nucleation is mostly based on a theory known as the Classical Nucleation Theory. However, the Classical Nucleation Theory is known to have only a limited success in predicting the rate at which vapor-to-liquid nucleation takes place at given conditions. This thesis studies the unary homogeneous vapor-to-liquid nucleation from a statistical mechanics viewpoint. We apply Monte Carlo simulations of molecular clusters to calculate the free energy barrier separating the vapor and liquid phases and compare our results against the laboratory measurements and Classical Nucleation Theory predictions. According to our results, the work of adding a monomer to a cluster in equilibrium vapour is accurately described by the liquid drop model applied by the Classical Nucleation Theory, once the clusters are larger than some threshold size. The threshold cluster sizes contain only a few or some tens of molecules depending on the interaction potential and temperature. However, the error made in modeling the smallest of clusters as liquid drops results in an erroneous absolute value for the cluster work of formation throughout the size range, as predicted by the McGraw-Laaksonen scaling law. By calculating correction factors to Classical Nucleation Theory predictions for the nucleation barriers of argon and water, we show that the corrected predictions produce nucleation rates that are in good comparison with experiments. For the smallest clusters, the deviation between the simulation results and the liquid drop values are accurately modelled by the low order virial coefficients at modest temperatures and vapour densities, or in other words, in the validity range of the non-interacting cluster theory by Frenkel, Band and Bilj. Our results do not indicate a need for a size dependent replacement free energy correction. The results also indicate that Classical Nucleation Theory predicts the size of the critical cluster correctly. We also presents a new method for the calculation of the equilibrium vapour density, surface tension size dependence and planar surface tension directly from cluster simulations. We also show how the size dependence of the cluster surface tension in equimolar surface is a function of virial coefficients, a result confirmed by our cluster simulations.

Didactical reconstructions for organizing knowledge in physics teacher education

Physics teachers are in a key position to form the attitudes and conceptions of future generations toward science and technology, as well as to educate future generations of scientists. Therefore, good teacher education is one of the key areas of physics departments education program. This dissertation is a contribution to the research-based development of high quality physics teacher education, designed to meet three central challenges of good teaching. The first challenge relates to the organization of physics content knowledge. The second challenge, connected to the first one, is to understand the role of experiments and models in (re)constructing the content knowledge of physics for purposes of teaching. The third challenge is to provide for pre-service physics teachers opportunities and resources for reflecting on or assessing their knowledge and experience about physics and physics education. This dissertation demonstrates how these challenges can be met when the content knowledge of physics, the relevant epistemological aspects of physics and the pedagogical knowledge of teaching and learning physics are combined. The theoretical part of this dissertation is concerned with designing two didactical reconstructions for purposes of physics teacher education: the didactical reconstruction of processes (DRoP) and the didactical reconstruction of structures (DRoS). This part starts with taking into account the required professional competencies of physics teachers, the pedagogical aspects of teaching and learning, and the benefits of the graphical ways of representing knowledge. Then it continues with the conceptual and philosophical analysis of physics, especially with the analysis of experiments and models role in constructing knowledge. This analysis is condensed in the form of the epistemological reconstruction of knowledge justification. Finally, these two parts are combined in the designing and production of the DRoP and DRoS. The DRoP captures the knowledge formation of physical concepts and laws in concise and simplified form while still retaining authenticity from the processes of how concepts have been formed. The DRoS is used for representing the structural knowledge of physics, the connections between physical concepts, quantities and laws, to varying extents. Both DRoP and DRoS are represented in graphical form by means of flow charts consisting of nodes and directed links connecting the nodes. The empirical part discusses two case studies that show how the three challenges are met through the use of DRoP and DRoS and how the outcomes of teaching solutions based on them are evaluated. The research approach is qualitative; it aims at the in-depth evaluation and understanding about the usefulness of the didactical reconstructions. The data, which were collected from the advanced course for prospective physics teachers during 20012006, consisted of DRoP and DRoS flow charts made by students and student interviews. The first case study discusses how student teachers used DRoP flow charts to understand the process of forming knowledge about the law of electromagnetic induction. The second case study discusses how student teachers learned to understand the development of physical quantities as related to the temperature concept by using DRoS flow charts. In both studies, the attention is focused on the use of DRoP and DRoS to organize knowledge and on the role of experiments and models in this organization process. The results show that students understanding about physics knowledge production improved and their knowledge became more organized and coherent. It is shown that the flow charts and the didactical reconstructions behind them had an important role in gaining these positive learning results. On the basis of the results reported here, the designed learning tools have been adopted as a standard part of the teaching solutions used in the physics teacher education courses in the Department of Physics, University of Helsinki.

Depression and Cognition in Type 2 Diabetes from a Life Course Perspective

Background: Type 2 diabetes is linked to several complications which add to both physical and mental distress. Depression is a common co-morbidity of diabetes which can occur both as a cause and a consequence of type 2 diabetes. Depression has been shown to correlate with glucose regulation and treating depression might prove beneficial for glucose regulation as well as for mental well being. Another complication which might affect diabetes management is cognitive decline. Several risk factors and complications of diabetes might modify the risk for developing cognitive impairment, which is increased 1.5 times among subjects with type 2 diabetes. Type 2 diabetes, depression and impaired cognitive performance have all been linked to low birth weight. This thesis aimed to explore the effects and interactions of birth weight, depression and cognitive ability in relation to type 2 diabetes from a life course perspective. Subjects and methods: Studies I, II and V were part of the Helsinki Birth Cohort Study. 2003 subjects participated in an extensive clinical examination at an average age of 61 years. A standard glucose tolerance test (OGTT) was performed and depressive symptoms were assessed using the Beck Depression Inventory (BDI). In addition data was obtained from child welfare clinics and national registers. A subset of the cohort (n=1247) also performed a test on cognitive performance (CogState ®) at the average age of 64. Studies III and IV were randomised clinical trials where mildly depressed diabetic subjects were treated with paroxetine or placebo and the effect on metabolic parameters and quality of life was assessed. The first trial included 14 women and lasted 10 weeks, while the second trial included 43 subjects, both men and women, and lasted 6 months. Results: Type 2 diabetes was positively associated with the occurrence of depressive symptoms. Among diabetic subjects 23.6% had depressive symptoms, compared to 16.7% of subjects with normal glucose tolerance (OR = 1.77, p<0.001). Formal mediation analysis revealed that cardiovascular disease (CVD) is likely to act as a mediator in the association. Furthermore, low birth weight was found to modify the association between type 2 diabetes, CVD and depression. The association between BDI score and having type 2 diabetes or CVD was twice as strong in the subgroup with low birth weight (≤ 2500g) compared with the group with birth weight > 2500g (p for interaction 0.058). In the six months long randomised clinical trial (study IV) paroxetine had a transient beneficial effect on glycosylated haemoglobin A1c (GHbA1c) and quality of life when compared to placebo after three months of treatment. In study V we found that subjects with known diabetes had a consistently poorer level of cognitive performance than subjects with normal glucose tolerance in most of the tested cognitive domains. This effect was further amplified among those born with a small birth weight (p for interaction 0.002). Conclusions: Type 2 diabetes is associated with a higher occurrence of depressive symptoms compared to subjects with normal glucose tolerance. This association is especially strong among subjects with CVD and those born with a low birth weight. Treating depressed diabetic subjects with paroxetine has no long term effect on glucose regulation. Physicians should be aware of depression as an important co-morbidity of type 2 diabetes. Both depression and the cognitive decline often seen among diabetic subjects are increased if the subject is born with a low birth weight. Physicians should recognise low birth weight as an additional risk factor and modifier of diabetic complications.

Perinatal mortality and maternal health in rural China

Background and context Since the economic reforms of 1978, China has been acclaimed as a remarkable economy, achieving 9% annual growth per head for more than 25 years. However, China's health sector has not fared well. The population health gains slowed down and health disparities increased. In the field of health and health care, significant progress in maternal care has been achieved. However, there still remain important disparities between the urban and rural areas and among the rural areas in terms of economic development. The excess female infant deaths and the rapidly increasing sex ratio at birth in the last decade aroused serious concerns among policy makers and scholars. Decentralization of the government administration and health sector reform impacts maternal care. Many studies using census data have been conducted to explore the determinants of a high sex ratio at birth, but no agreement has been so far reached on the possible contributing factors. No study using family planning system data has been conducted to explore perinatal mortality and sex ratio at birth and only few studies have examined the impact of the decentralization of government and health sector reforms on the provision and organization of maternal care in rural China. Objectives The general objective of this study was to investigate the state of perinatal health and maternal care and their determinants in rural China under the historic context of major socioeconomic reforms and the one child family planning policy. The specific objectives of the study included: 1) to study pregnancy outcomes and perinatal health and their correlates in a rural Chinese county; 2) to examine the issue of sex ratio at birth and its determinants in a rural Chinese county; 3) to explore the patterns of provision, utilization, and content of maternal care in a rural Chinese county; 4) to investigate the changes in the use of maternal care in China from 1991 to 2003. Materials and Methods This study is based on a project for evaluating the prenatal care programme in Dingyuan county in 1999-2003, Anhui province, China and a nationwide household health survey to describe the changes in maternal care utilization. The approaches used included a retrospective cohort study, cross sectional interview surveys, informant interviews, observations and the use of statistical data. The data sources included the following: 1) A cohort of pregnant women followed from pregnancy up to 7 days after birth in 20 townships in the study county, collecting information on pregnancy outcomes using family planning records; 2) A questionnaire interview survey given to women who gave birth between 2001 and 2003; 3) Various statistical and informant surveys data collected from the study county; 4) Three national household health interview survey data sets (1993-2003) were utilized, and reanalyzed to described the changes in maternity care utilization. Relative risks (RR) and their confidence intervals (CI) were calculated for comparison between parity, approval status, infant sex and township groups. The chi-square test was used to analyse the disparity of use of maternal care between and within urban and rural areas and its trend across the years in China. Logistic regression was used to analyse the factors associated with hospital delivery in rural areas. Results There were 3697 pregnancies in the study cohort, resulting in 3092 live births in a total population of 299463 in the 20 study townships during 1999-2000. The average age at pregnancy in the cohort was 25.9 years. Of the women, 61% were childless, 38% already had one child and 0.3% had two children before the current pregnancy. About 90% of approved pregnancies ended in a live birth while 73% of the unapproved ones were aborted. The perinatal mortality rate was 69 per thousand births. If the 30 induced abortions in which the gestational age was more than 28 weeks had been counted as perinatal deaths, the perinatal mortality rate would have been as high as 78 per thousand. The perinatal mortality rate was negatively associated with the wealth of the township. Approximately two thirds of the perinatal deaths occurred in the early neonatal period. Both the still birth rate and the early neonatal death rate increased with parity. The risk of a stillbirth in a second pregnancy was almost four times that for a first pregnancy, while the risk of early neonatal deaths doubled. The early neonatal mortality rate was twice as high for female as for male infants. The sex difference in the early neonatal mortality rate was mainly attributable to mortality in second births. The male early neonatal mortality rate was not affected by parity, while the female early neonatal mortality rate increased dramatically with parity: it was about six times higher for second births than for first births. About 82% early neonatal deaths happened within 24 hours after birth, and during that time, girls were almost three times more likely to die than boys. The death rate of females on the day of birth increased much more sharply with parity than that of males. The total sex ratio at birth of 3697 registered pregnancies was 152 males to 100 females, with 118 and 287 in first and second pregnancies, respectively. Among unapproved pregnancies, there were almost 5 live-born boys for each girl. Most prenatal and delivery care was to be taken care of in township hospitals. At the village level, there were small private clinics. There was no limitation period for the provision of prenatal and postnatal care by private practitioners. They were not permitted to provide delivery care by the county health bureau, but as some 12% of all births occurred either at home or at private clinics; some village health workers might have been involved. The county level hospitals served as the referral centers for the township hospitals in the county. However, there was no formal regulation or guideline on how the referral system should work. Whether or not a woman was referred to a higher level hospital depended on the individual midwife's professional judgment and on the clients' compliance. The county health bureau had little power over township hospitals, because township hospitals had in the decentralization process become directly accountable to the township government. In the township and county hospitals only 10-20% of the recurrent costs were funded by local government (the township hospital was funded by the township government and the county hospital was funded by the county government) and the hospitals collected user fees to balance their budgets. Also the staff salaries depended on fee incomes by the hospital. The hospitals could define the user charges themselves. Prenatal care consultations were however free in most township hospitals. None of the midwives made postnatal home visits, because of low profit of these services. The three national household health survey data showed that the proportion of women receiving their first prenatal visit within 12 weeks increased greatly from the early to middle 1990s in all areas except for large cities. The increase was much larger in the rural areas, reducing the urban-rural difference from more than 4 times to about 1.4 times. The proportion of women that received antenatal care visits meeting the Ministry of Health s standard (at least 5 times) in the rural areas increased sharply from 12% in 1991-1993 to 36% in 2001-2003. In rural areas, the proportion increase was much faster in less developed areas than in developed areas. The hospital delivery rate increased slightly from 90% to 94% in urban areas while the proportion increased from 27% to 69% in rural areas. The fastest change was found to be in type 4 rural areas, where the utilization even quadrupled. The overall difference between rural and urban areas was substantially narrowed over the period. Multiple logistic regression analysis shows that time periods, residency in rural or urban areas, income levels, age group, education levels, delivery history, occupation, health insurance and distance from the nearest health care facilities were significantly associated with hospital delivery rates. Conclusions 1. Perinatal mortality in this study was much higher than that for urban areas as well as any reported rate from specific studies in rural areas of China. Previous studies in which calculations of infant mortality were not based on epidemiological surveys have been shown to underestimate the rates by more than 50%. 2. Routine statistics collected by the Chinese family planning system proved to be a reliable data source for studying perinatal health, including still births, neonatal deaths, sex ratio at birth and among newborns. National Household Health Survey data proved to be a useful and reliable data source for studying population health and health services. Prior to this research there were few studies in these areas available to international audiences. 3.Though perinatal mortality rate was negatively associated with the level of township economic development, the excess female early neonatal mortality rate contributed much more to high perinatal mortality rate than economic factors. This was likely a result of the role of the family planning policy and the traditional preferences for sons, which leads to lethal neglect of female newborns and high perinatal mortality. 4. The selective abortions of female foetuses were likely to contribute most to the high sex ratio at birth. The underreporting of female births seemed to have played a secondary role. The higher early neonatal mortality rate in second-born as compared to first-born children, particularly in females, may indicate that neglect or poorer care of female newborn infants also contributes to the high sex ratio at birth or among newborns. Existing family planning policy proved not to effectively control the steadily increased birth sex ratio. 5. The rural-urban gap in service utilization was on average significantly narrowed in terms of maternal healthcare in China from 1991 to 2003. This demonstrates that significant achievements in reducing inequities can be made through a combination of socio-economic development and targeted investments in improving health services, including infrastructure, staff capacities, and subsidies to reduce the costs of service utilization for the poorest. However, the huge gap which persisted among cities of different size and within different types of rural areas indicated the need for further efforts to support the poorest areas. 6. Hospital delivery care in the study county was better accepted by women because most of women think delivery care was very important while prenatal and postnatal care were not. Hospital delivery care was more systematically provided and promoted than prenatal and postnatal care by township hospital in the study area. The reliance of hospital staff income on user fees gave the hospitals an incentive to put more emphasis on revenue generating activities such as delivery care instead of prenatal and postnatal care, since delivery care generated much profits than prenatal and postnatal care . Recommendations 1. It is essential for the central government to re-assess and modify existing family planning policies. In order to keep national sex balance, the existing practice of one couple one child in urban areas and at-least-one-son a couple in rural areas should be gradually changed to a two-children-a-couple policy throughout the country. The government should establish a favourable social security policy for couples, especially for rural couples who have only daughters, with particular emphasis on their pension and medical care insurance, combined with an educational campaign for equal rights for boys and girls in society. 2. There is currently no routine vital-statistics registration system in rural China. Using the findings of this study, the central government could set up a routine vital-statistics registration system using family planning routine work records, which could be used by policy makers and researchers. 3. It is possible for the central and provincial government to invest more in the less developed and poor rural areas to increase the access of pregnant women in these areas to maternal care services. Central government together with local government should gradually provide free maternal care including prenatal and postnatal as well as delivery care to the women in poor and less developed rural areas. 4. Future research could be done to explore if county and the township level health care sector and the family planning system could be merged to increase the effectiveness and efficiency of maternal and child care. 5. Future research could be done to explore the relative contribution of maternal care, economic development and family planning policy on perinatal and child health using prospective cohort studies and community based randomized trials. Key words: perinatal health, perinatal mortality, stillbirth, neonatal death, sex selective abortion, sex ratio at birth, family planning, son preference, maternal care, prenatal care, postnatal care, equity, China

Breakage and coalescence of drops in turbulent stirred dispersions

The various existing models for predicting the maximum stable drop diameterd max in turbulent stirred dispersions have been reviewed. Variations in the basic framework dictated by additional complexities such as the presence of drag reducing agents in the continuous phase, or viscoelasticity of the dispersed phase have been outlined. Drop breakage in the presence of surfactants in the continuous phase has also been analysed. Finally, the various approaches to obtaining expressions for the breakage and coalescence frequencies, needed to solve the population balance equation for the number density function of the dispersed phase droplets, have been discussed.

A new model for the breakage frequency of drops in turbulent stirred dispersions

A model of drop breakage in turbulent stirred dispersions based on interaction of a drop with eddies of a length scale smaller than the drop diameter has been developed. It predicts that, unlike the equal breakage assumed by earlier models, a large drop reduces in size due to stripping of smaller segments off it through unequal breakage. It is only when the drop nears the value of the maximum stable drop diameter that it breaks into equal parts. This new model of drop breakage, coupled with the pattern of interaction of drops with eddies of different sizes existing in the vessel, has been used to evaluate not only the breakage frequency, but also the size distribution of the daughter droplets(which was hitherto assumed). The model has been incorporated in the population balance equation and the resulting cumulative size distributions compared with those availble in the literature.

Blade manipulators in turbulent channel flow

We report here the results of a series of careful experiments in turbulent channel flow, using various configurations of blade manipulators suggested as optimal in earlier boundary layer studies. The mass flow in the channel could be held constant to better than 0.1%, and the uncertainties in pressure loss measurements were less than 0.1 mm of water; it was therefore possible to make accurate estimates of the global effects of blade manipulation of a kind that are difficult in boundary layer flows. The flow was fully developed at the station where the blades were mounted, and always relaxed to the same state sufficiently far downstream. It is found that, for a given mass flow, the pressure drop to any station downstream is always higher in the manipulated than in the unmanipulated flow, demonstrating that none of the blade manipulators tried reduces net duct losses. However the net increase in duct losses is less than the drag of the blade even in laminar flow, showing that there is a net reduction in the total skin friction drag experienced by the duct, but this relief is only about 20% of the manipulator drag at most.

A new model for coalescence efficiency of drops in stirred dispersions

A model for coalescence efficiency of two drops embedded in an eddy has been developed. Unlike the other models which consider only head-on collisions, the model considers the droplets to approach at an arbitrary angle. The drop pair is permitted to undergo rotation while they approach each other. For coalescence to occur, the drops are assumed to approach each other under a squeezing force acting over the life time of eddy but which can vary with time depending upon the angle of approach. The model accounts for the deformation of tip regions of the approaching drops and, describes the rupture of the intervening film, based on stability considerations while film drainage is continuing under the combined influence of the hydrodynamic and van der Waals forces. The coalescence efficiency is defined as the ratio of the range of angles resulting in coalescence to the total range of all possible approach angles. The model not only reconciles the contradictory predictions made by the earlier models based on similar framework but also brings out the important role of dispersed-phase viscosity. It further predicts that the dispersions involving pure phases can be stabilized at high rps values. Apart from explaining the hitherto unexplained experimental data of Konno et al. qualitatively, the model also offers an alternate explanation for the interesting observations of Shinnar.